Enrofloxacin behavior in presence of soil extracted organic matter: An electrochemical approach

Antenna effect of perylene-sensitized up-conversion luminescent material amplifies the signal of electrochemiluminescence biosensor platform for the ultra-sensitive detection of enrofloxacin

Recently, up-conversion luminescent (UCL) materials have caught extensive sight on account of their excellent biocompatibility and weak automatic fluorescence background, but the low optical signal makes researchers shy away. Organic dye-sensitized UCL materials can improve the low optical signal drawback of UCL and rejuvenate it with adjustable optical properties and unique antenna effects. In this work, an efficient, simple and selective electrochemiluminescence (ECL) sensing platform was developed for determination of enrofloxacin (ENR). 3,4,9,10-perylene tetracarboxylic acid (PTCA) was successfully used as an "antenna" to improve the ECL performance of the UCL nanoparticles (PEI-NaYF4: Yb, Er) due to its appropriate excitation spectrum position and superior electron transfer rate. The specific recognition function of the aptamer enabled the sensor to eliminate the interference from conspecific impurity. In the presence of ENR, the specific combination of ENR with aptamer made the aptamer fall from surface of the electrode, thus we could see a considerable enhancement of signal. Under the most favourable conditions, the aptasensor based on antenna effect displayed a wide detection range (1.0 × 10-14∼1.0 × 10-6 M), low limit of detection (LOD = 3.0 × 10-15 M) and receivable recoveries (96.0%-102.4%) during water samples analysis. At this point, antenna effect provides a powerful strategy to expand the application of UCL in the field of ECL biosensing.

Sensitive electrochemical detection of enrofloxacin in eggs based on carboxylated multi-walled carbon nanotubes-reduced graphene oxide nanocomposites: Molecularlyimprintedrecognition versus direct electrocatalytic oxidation

A sensitive electrochemical method for detecting enrofloxacin was proposed using carboxylated multi-walled carbon nanotubes-reduced graphene oxide (MWCNT-COOH-RGO) nanocomposites. The MWCNT-COOH-RGO nanocomposites were firstly electrodeposited on a bare electrode, followed by electropolymerization of molecularly imprinted polymers. Enrofloxacin was determined by the mechanisms of direct electrocatalytic oxidation and molecularly imprinted recognition, respectively. Under the optimized conditions, a response range of 5.0×10^-7 M to 5.5×10^-5 M and limit of detection (LOD) of 2.3×10^-7 M were obtained by direct electrocatalytic oxidation of enrofloxacin using chronoamperometry. By contrast, the response range of 1.0×10^-10 M to 5.0×10^-5 M and LOD of 2.5×10^-11 M were achieved by molecularly imprinted recognition of enrofloxacin using square-wave voltammetry. Moreover, the proposed method exhibited good repeatability, stability and selectivity, and could be used for enrofloxacin detection in egg samples with satisfactory results.

Adsorption kinetics studies of ciprofloxacin in soils derived from volcanic materials by electrochemical approaches and assessment of socio-economic impact on human health

The use of antibiotics in the livestock sector has resulted in the entry of these drugs into the soil matrix through the disposal of manure as an organic amendment. To define the fate of these drugs, it is necessary to evaluate kinetic aspects regarding transport in the soil-solution. The aim of this paper is to evaluate the adsorption kinetic parameters of Ciprofloxacin (CIPRO) in Ultisol and Andisol soil which allows obtaining main kinetic parameters (pseudo-first and pseudo-second order models) and to establish the solute transport mechanism by applying kinetic models such as the Elovich equation, Intraparticle diffusion (IPD) and, the Two-site non-equilibrium models (TSNE). The adsorption kinetics of this fluoroquinolone (FQ), on both soils derived from volcanic ashes, is developed using electrochemical techniques for their determination. The experimental amount of CIPRO adsorbed over time (Qt) data best fit with the pseudo-second order kinetic models; R² = 0.9855, Ɛ = 10.17% and R² = 0.9959, Ɛ = 10.77% for Ultisol and Andisol, respectively; and where CIPRO adsorption was considered time dependent for both soils but the lower adsorption capacity in Ultisol; with 17.6 ± 2.8 μmol g^-1; which could mean a greater risk in environmental. Subsequently, applying models to describe solute transport mechanisms showed differences in the CIPRO adsorption extent for the fast and slow phases. Adsorption isotherms were evaluated, where Ultisol occurs on heterogenous sites as multilayers and Andisol by monolayer with similar Q_max. Finally, the socio-economic impact of antibiotic usage is presented, giving the importance of antibiotics in the livestock sector and their effects on human health.

Electrochemical Sensor Based on a Composite of Reduced Graphene Oxide and Molecularly Imprinted Copolymer of Polyaniline-Poly(o-phenylenediamine) for Ciprofloxacin Determination: Fabrication, Characterization, and Performance Evaluation

Contamination of antibiotics in water is a major cause of antibiotic resistance (ABR) in pathogens that endangers human health and food security worldwide. Ciprofloxacin (CIP) is a synthetic fluoroquinolone (FQ) antibiotic and is reportedly present in surface water at a concentration exceeding the ecotoxicological predicted no-effect concentration in some areas. This study fabricated a CIP sensor using an electropolymerized molecularly imprinted polymer (MIP) of polyaniline (PANI) and poly(o-phenylenediamine) (o-PDA) with CIP recognition sites. The MIP was coated on a reduced graphene oxide (rGO)-modified glassy carbon electrode (rGO/GCE) and operated under a differential pulse voltammetry (DPV) mode for CIP detection. The sensor exhibited an excellent response from 1.0 × 10^-9 to 5.0 × 10^-7 mol L^-1 CIP, showing a sensor detection limit and sensitivity of 5.28 × 10^-11 mol L^-1 and 5.78 μA mol^-1 L, respectively. The sensor's sensitivity for CIP was 1.5 times higher than that of the other tested antibiotics, including enrofloxacin (ENR), ofloxacin (OFX), sulfamethoxazole (SMZ), and piperacillin sodium salt (PIP). The reproducibility and reusability of the sensor devices were also studied.

A highly sensitive impedimetric sensor based on a MIP biomimetic for the detection of enrofloxacin

The benefits of molecularly imprinted polymer (MIP) technology in creating artificial receptors to replace natural counterparts have piqued the interest of numerous researchers in recent years. We propose a biomimetic enrofloxacin-MIP for enrofloxacin (ENRO) antigen detection using gold nanoparticles (AuNPs) and MIP methodologies in this study. A self-assembled monomer layer of aminothiophenol was used to immobilize a pre-formed complex of the anti-enrofloxacin monoclonal antibody and enrofloxacin antigen onto the surface of an AuNP coated screen-printed carbon ink electrode (SPCE). The poly-(aminothiophenol) layer thickness was adjusted to entrap and restrict enrofloxacin antigens near the surface. The imprinting and removal of the enrofloxacin antigen in the MIP film were strongly validated by the Raman spectra. The final mAb-MIP sensor had better sensitivity (302 Ω mL ng^-1) and a better detection limit (0.05 ng mL^-1) than self-assembled monolayer (SAM)-based immunosensors, which had 102 Ω mL ng^-1 and 0.1 ng mL^-1, respectively.

A novel electrochemical sensor for the detection of enrofloxacin based on a 3D flower-like metal tungstate-incorporated reduced graphene oxide nanocomposite

In recent times, metal tungstates have received a lot of attention in various research fields. Accordingly, the CaWO₄/RGO (CW/RGO) nanocomposite was prepared by a facile hydrothermal method. The electrocatalytic performance of the hydrothermally prepared CW/RGO nanocomposite was used for the electrochemical detection of the antibiotic medicine enrofloxacin (ENF). The electrocatalytic oxidation performance of ENF was examined by cyclic voltammetry (CV) and amperometry (AMP) techniques. The CV results showed the lowest anodic peak potential and the enhanced anodic peak current response compared to the other modified electrodes. Mainly, our newly proposed sensor exhibited excellent electrochemical performance with the lowest limit of detection (LOD) of 0.021 μM, and a significant linear range of 0.001-115 μM. Additionally, our proposed sensor exhibited good selectivity, great long-term stability, and excellent reproducibility. Then, our proposed sensor was successfully applied to detect the amount of ENF in a milk sample and river water, which exhibited good satisfactory results.

An electrochemical sensor for voltammetric detection of ciprofloxacin using a glassy carbon electrode modified with activated carbon, gold nanoparticles and supramolecular solvent

A highly sensitive and novel electrochemical sensor for ciprofloxacin (CIP) has been developed using gold nanoparticles deposited with waste coffee ground activated carbon on glassy carbon electrode (AuNPs/AC/GCE) and combined with supramolecular solvent (SUPRAS). The fabricated AuNPs/AC/GCE displayed good electrocatalytic activity for AuNPs. The addition of SUPRAS, prepared from cationic surfactants namely didodecyldimethylammonium bromide (DDAB) and dodecyltrimethylammonium bromide (DTAB), increased the electrochemical response of AuNPs. The detection of CIP was based on the decrease of the cathodic current of AuNPs. The electrochemical behavior of the modified electrode was investigated using cyclic voltammetry, differential pulse voltammetry and electrochemical impedance spectroscopy. Under optimum conditions, the calibration plot of CIP exhibited a linear response in the range 0.5-25 nM with a detection limit of 0.20 nM. The fabricated electrochemical sensor was successfully applied to determine CIP in milk samples with achieved recoveries of 78.6-110.2% and relative standard deviations of <8.4%. The developed method was also applied to the analysis of pharmaceutical formulation and the results were compared with high-performance liquid chromatography.Graphical abstract.

Electrochemical methods for the determination of antibiotic residues in milk: A critical review

Several antibiotics have been applied to veterinary medicine due to their broad-spectrum of antibacterial activity and prophylactic power. Residues of these antibiotics can be accumulated in dairy cattle, in addition to promoting contamination of the environment and, in more serious cases, in milk, causing a public health problem. Different regulatory agencies establish maximum residue limits for these antibiotics in milk, so it becomes important to develop sensitive analytical methods for monitoring these compounds. Electrochemical techniques are important analytical tools in analytical chemistry because they present low cost, simplicity, high sensitivity, and adequate analytical frequency (sample throughput) for routine analyses. In this sense, this review summarizes the state of the art of the main electrochemical sensors and biosensors, instrumental techniques, and sample preparation used for the development of analytical methods, published in the last five years, for the monitoring of different classes of antibiotics: aminoglycosides, amphenicols, beta-lactams, fluoroquinolones, sulfonamides, and tetracyclines, in milk samples. The different strategies to develop electrochemical sensors and biosensors are critically compared considering their analytical features. The mechanisms of electrochemical oxidation/reduction of the antibiotics are revised and discussed considering strategies to improve the selectivity of the method. In addition, current challenges and future prospects are discussed.

Bioelectrochemical chlorate reduction by Dechloromonas agitata CKB

Chlorate has been described as an emerging pollutant that compromises water sources. In this study, bioelectrochemical reactors (BERs) using Dechloromonas agitata CKB, were evaluated as a sustainable alternative for chlorate removal. BERs were operated under flow-recirculation and batch modes with an applied cell-voltage of 0.44 V over a resistance of 1 kΩ. Results show chlorate removal up to 607.288 mg/L. After 115 days, scanning electron microscopy showed biofilm development over the electrodes, and electrochemical impedance spectroscopy confirmed the biocatalytic effect of CKB. The theoretical chlorate bioreduction potential (ε° = 0.792 V) was proven, and a kinetic study indicated that 6 electrons were involved in the reduction mechanism. Finally, a hypothetical bioelectrochemical mechanism for chlorate reduction in a BER was proposed. This research expands upon current knowledge of novel electrochemically active microorganisms and widens the scope of BER applications for chlorate removal.

Biodegradation of oxytetracycline and enrofloxacin by autochthonous microbial communities from estuarine sediments

This work investigated the potential of microbial communities native to an estuarine environment to biodegrade enrofloxacin (ENR) and oxytetracycline (OXY). Sediments collected from two sites in the Douro river estuary (Porto, Portugal) were used as inocula for the biodegradation experiments. Experiments were carried out for one month, during which ENR and OXY (1 mg L^-1) were supplemented individually or in mixture to the cultures at 10-day intervals. Acetate (400 mg L^-1) was added to the cultures every 3 days to support microbial growth. A series of experimental controls were established in parallel to determine the influence of abiotic breakdown and adsorption in the removal of the antibiotics. Removal of antibiotics was followed by measuring their concentration in the culture medium. Additionally, next-generation sequencing of the 16S rRNA gene amplicon was employed to understand how microbial communities responded to the presence of the antibiotics. At the end of the biodegradation experiments, microbial cultures derived from the two estuarine sediments were able to remove up to 98% of ENR and over 95% of OXY. The mixture of antibiotics did not affect their removal. ENR was removed mainly by biodegradation, while abiotic mechanisms were found to have a higher influence in the removal of OXY. Both antibiotics adsorbed at different extents to the estuarine sediments used as inocula but exhibited a higher affinity to the sediment with finer texture and higher organic matter content. The presence of ENR and OXY in the culture media influenced the dynamics of the microbial communities, resulting in a lower microbial diversity and richness and in the predominance of bacterial species belonging to the phylum Proteobacteria. Therefore, microbial communities native from estuarine environments have potential to respond to the contamination caused by antibiotics and may be considered for the recovering of impacted environments through bioremediation.