Fabrication and Bifunctional Electrocatalytic Performance of Ternary CoNiMn Layered Double Hydroxides/Polypyrrole/Reduced Graphene Oxide Composite for Oxygen Reduction and Evolution Reactions

Ti3C2 mediates the NiFe-LDH layered electrocatalyst to enhance the OER performance for water splitting

Oxygen evolution reaction (OER) is a very complex process with slow reaction kinetics and high overpotential, which is the main limitation for the commercial application of water splitting. Thus, it is of necessary to design high-performance OER catalysts. NiFe based layered double hydroxides (NiFe-LDHs) have recently gained a lot of attention due to their high reaction activity and simple manufacturing process. In this study, a novel electrocatalyst based on NiFe-LDH was constructed by introducing Ti3C2, which was utilized to modulate the structural and electronic properties of the electrocatalysts. Structural examinations reveal that the Ti3C2 of 2D structure successfully dope the NiFe-LDHs nanosheets, forming NiFe-LDH/Ti3C2 heterojunctions. Firstly, the heterojunction substantially reduces the charge transfer resistance, promoting the electron migration between the LDH nanosheets. Secondly, theoretical calculations demonstrate that the energy barrier between the rate-determining step from *OH to *O is lowered, favoring the formation of the reaction intermediates and thus the occurrence of OER. As a result, the composite electrocatalyst exhibits a low overpotential of 334 mV at a current density of 10 mA/cm2 and a small Tafel slope of 55 mV/dec, which are superior to those of the NiFe-LDH by 11.2 % and 38.5 %, respectively. This study provides inspiration for promoting the performances of NiFe based electrocatalysts by utilizing 2D materials.

Understanding the role of solvents in bottom-up synthesis of multi-element hydroxides

Here we report a comparative study on the bottom-up synthesis of multi-element hydroxides composed of Mg, Al, Fe and Zn cations to understand the role of solvents. Two common solvents, water and ethylene glycol, a typical polyol, are used. The polyol-derived MgAlFeZn-OH are nanosheets with homogeneous elemental distribution, while the hydrothermal-derived MgAlFeZn-OH are mixtures of plate-like hydroxide layers and rod-like spinel oxides. The coordinating properties and the high viscosity of the ethylene glycol provide the possibility to mediate the hydrolysis rates and to control the particle growth. The high specific surface area of the polyol-derived multi-element hydroxide nanosheets (352.4 m2 g-1) guarantees them as excellent adsorbents for adsorbing anionic dyes in aqueous solution.

Co(II)-Based Metal-Organic Framework Derived CA-CoNiMn-CLDHs with Peroxidase-like Activity for Colorimetric Detection of Phenol

Given the serious harm of toxic phenol to human health and the ecological environment, it is urgent to develop an efficient, low-cost and sensitive nanoenzyme-based method to monitor phenol. MOF-derived nanozyme has attracted wide interest due to its hollow polyhedra structure and porous micro-nano frameworks. However, it is still a great challenge to synthesize MOF-derived multimetal synergistic catalytic nanoenzymes in large quantities with low cost. Herein, we reported the synthetic strategy of porous hollow CA-CoNiMn-CLDHs with ZIF-67 as templates through a facile solvothermal reaction. The prepared trimetallic catalyst exhibits excellent peroxidase-like activity to trigger the oxidative coupling reaction of 4-AAP and phenol in the presence of H2O2. The visual detection platform for phenol based on CA-CoNiMn-CLDHs is constructed, and satisfactory results are obtained. The Km value for CA-CoNiMn-CLDHs (0.21 mM) is lower than that of HRP (0.43 mM) with TMB as the chromogenic substrate. Because of the synergistic effect of peroxidase-like activity and citric acid functionalization, the built colorimetric sensor displayed a good linear response to phenol from 1 to 100 μM with a detection limit of 0.163 μM (3σ/slope). Additionally, the CA-CoNiMn-CLDHs-based visual detection platform possesses high-chemical stability and excellent reusability, which can greatly improve economic benefits in practical applications.

Sulfidation and NaOH etching in CoFeAl LDH evolved catalysts for an efficient overall water splitting in an alkaline solution

In this study, a hierarchical interconnected porous metal sulfide heterostructure was synthesized from CoFeAl layered double hydroxides (LDHs) by a two-step hydrothermal process (sulfidation and a NaOH etching process). Among the as-made samples, the CoFeAl-T-NaOH electrode exhibited excellent oxygen and hydrogen evolution reaction catalytic activities with overpotentials of 344 mV and 197 mV at the current density of 100 mA cm^-2, respectively. Meanwhile, small Tafel slopes of 57.7 mV dec^-1 and 106.5 mV dec^-1 for water oxidation and hydrogen evolution were observed for the CoFeAl-T-NaOH, respectively. Serving as both the cathode and anode for overall water splitting, the CoFeAl-T-NaOH electrode reached a current density of 10 mA cm^-2 at a cell voltage of 1.65 V with excellent stability. The enhanced electrocatalytic activity could be attributed to: the hierarchical interconnected nanosheet structure facilitating mass transport; the porous structure promoting electrolyte infiltration and reactant transfer; the heterojunction accelerating charge transfer; and the synergistic effect between them. This study offered a new clue for in situ synthesizing porous transition-metal based heterojunction electrocatalysts with a careful tuning of the sequence of sulfuration and alkaline etching to enhance the electrocatalytic performance.

Carbon-Hybridized Hydroxides for Energy Conversion and Storage: Interface Chemistry and Manufacturing

Carbon-hybridized hydroxides (CHHs) have been intensively investigated for uses in the energy conversion/storage fields. Nevertheless, the intrinsic structure-activity relationships between carbon and hydroxides within CHHs are still blurry, which hinders the fine modulation of CHHs in terms of practical applications to some degree. This review aims to figure out the intrinsic role of carbon materials in CHHs with a focus on the interface chemistry and the engineering strategy in-between two components. The fundamental effects of the carbon materials in enhancing the charge/mass transfer kinetics are first analyzed, particularly the extra electron pathways for fast charge transfer and the anchoring sites for boosting the mass transfer. Subsequently, the surface-guided/confined effects of carbon materials in CHHs to modify the morphology and tailor the hydroxides, and functional heterojunction for regulating the inner electronic structure are decoupled. The methods to efficiently construct a stable yet robust solid-solid heterointerface are summarized, including oxygen functional groups engrafting, topological defective sites construction and heteroatom incorporation to activate the inert carbon surface. The smart CHHs in some typical energy applications are demonstrated. Additionally, the methodologies that can reveal the hybridization electron configuration between two components are summed up. At last, the perspective and challenges faced by the CHHs for energy-related applications are outlined.

F127-assisted preparation of FeCo nanoalloys encapsulated in nitrogen-doped carbon for efficient oxygen reduction reaction

A novel F127-assisted ZIF-67 pyrolysis strategy to construct FeCo nanoalloys encapsulated in nitrogen-doped carbon for efficient oxygen reduction reaction was reported.

Synergistic coupling of FeOOH with Mo-incorporated NiCo LDH towards enhancing the oxygen evolution reaction

FeOOH-modified NiCoMo LDH/NF with excellent OER activity and stability was successfully prepared using a hydrothermal method combined with electrodeposition.

Recent Progress on Transition Metal Based Layered Double Hydroxides Tailored for Oxygen Electrode Reactions

The oxygen reduction reaction (ORR) and oxygen evolution reaction (OER), namely, so-called oxygen electrode reactions, are two fundamental half-cell reactions in the energy storage and conversion devices, e.g., zinc–air batteries and fuel cells. However, the oxygen electrode reactions suffer from sluggish kinetics, large overpotential and complicated reaction paths, and thus require efficient and stable electrocatalysts. Transition-metal-based layered double hydroxides (LDHs) and their derivatives have displayed excellent catalytic performance, suggesting a major contribution to accelerate electrochemical reactions. The rational regulation of electronic structure, defects, and coordination environment of active sites via various functionalized strategies, including tuning the chemical composition, structural architecture, and topotactic transformation process of LDHs precursors, has a great influence on the resulting electrocatalytic behavior. In addition, an in-depth understanding of the structural performance and chemical-composition-performance relationships of LDHs-based electrocatalysts can promote further rational design and optimization of high-performance electrocatalysts. Finally, prospects for the design of efficient and stable LDHs-based materials, for mass-production and large-scale application in practice, are discussed.

Advanced electrocatalysts based on two-dimensional transition metal hydroxides and their composites for alkaline oxygen reduction reaction

The electrocatalytic oxygen reduction reaction (ORR) is a crucial part in developing high-efficiency fuel cells and metal-air batteries, which have been cherished as clean and sustainable energy conversion devices/systems to meet the ever-increasing energy demand. ORR electrocatalysts currently employed in the cathodes of fuel cells and metal-air batteries are mainly based on high-cost and scarce noble metal elements. It is thus of great importance to develop cheap and earth-abundant ORR electrocatalysts. In this aspect, redox-active transition metal hydroxides, a class of multifunctional inorganic layered materials, have been proposed as prospective candidates on account of their abundance and high ORR activities. In this article, the preparation and structural evolution of transition metal hydroxides, in particular their exfoliation into two-dimensional (2D) nanosheets, as well as compositing/integrating with catalytic active and/or conductive components to overcome the insulating nature of hydroxides in alkaline ORR, are summarized. Recent advances have demonstrated that 2D transition metal hydroxides with carefully tuned compositions and elaborately designed nanoarchitectures can achieve both high activity and high pathway selectivity, as well as excellent stability comparable to those of commercial Pt/C electrocatalysts. To realize the dream of renewable electrochemical energy conversion, new strategies and insights into rational designing of 2D hydroxide-based nanostructures with further enhanced electrocatalytic performance are still to be vigorously pursued.

Morphology, Thermal Stability, and Flammability Properties of Polymer-Layered Double Hydroxide (LDH) Nanocomposites: A Review

The utilization of layered nanofillers in polymer matrix, as reinforcement, has attracted great interest in the 21st century. This can be attributed to the high aspect ratios of the nanofillers and the attendant substantial improvement in different properties (i.e., increased flammability resistance, improved modulus and impact strength, as well as improved barrier properties) of the resultant nanocomposite when compared to the neat polymer matrix. Amongst the well-known layered nanofillers, layered inorganic materials, in the form of LDHs, have been given the most attention. LDH nanofillers have been employed in different polymers due to their flexibility in chemical composition as well as an adjustable charge density, which permits numerous interactions with the host polymer matrices. One of the most important features of LDHs is their ability to act as flame-retardant materials because of their endothermic decomposition. This review paper gives detailed information on the: preparation methods, morphology, flammability, and barrier properties as well as thermal stability of LDH/polymer nanocomposites.

In situ templating synthesis of mesoporous Ni–Fe electrocatalyst for oxygen evolution reaction

Low-cost and efficient electrocatalysts with high dispersion of active sites and high conductivity are of high importance for oxygen evolution reaction (OER). Herein, we use amorphous mesoporous fumed silica (MFS) as a skeleton material to disperse Ni²⁺ and Fe³⁺ through a simple impregnation strategy. The MFS is in situ etched away during the OER process in 1 M KOH to prepare a stable mesoporous Ni–Fe electrocatalyst. The high specific surface area and abundant surface silanol groups in the mesoporous fumed silica afford rich anchor sites for fixing metal atoms via strong chemical metal–oxygen interactions. Raman and XPS investigations reveal that Ni²⁺ formed covalent bonds with surface Si–OH groups, and Fe³⁺ inserted into the framework of fumed silica forming Fe–O–Si bonds. The mesoporous Ni–Fe catalysts offer high charge transfer abilities in the OER process. When loaded on nickel foam, the optimal 2Ni1Fe-MFS catalyst exhibits an overpotential of 270 mV at 10 mA cm⁻² and a Tafel slope of 41 mV dec⁻¹. Notably, 2Ni1Fe-MFS shows a turnover frequency value of 0.155 s⁻¹ at an overpotential of 300 mV, which is 80 and 190 times higher than that of the state-of-the-art IrO₂ and RuO₂ catalysts. Furthermore, 2Ni1Fe-MFS exhibits 100% faradaic efficiency, large electrochemically active surface area, and good long-term durability, confirming its outstanding OER performance. Such high OER efficiency can be ascribed to the synergistic effect of high surface area, dense metal active sites and interfacial conductive path. This work provides a promising strategy to develop simple, cost-effective, and highly efficient porous Ni–Fe based catalysts for OER.

A stable mesoporous Ni–Fe–O electrocatalyst with high OER efficiency is constructed using mesoporous fumed silica as a template.

Recent advances in ternary layered double hydroxide electrocatalysts for the oxygen evolution reaction

The recent advances in ternary layered double hydroxide electrocatalysts, including the strategies used for the design, synthesis, and evaluation of their performance for oxygen evolution reaction are reviewed in this account.

Dispersing transition metal vacancies in layered double hydroxides by ionic reductive complexation extraction for efficient water oxidation

Creating atomic defects in nanomaterials is an effective approach to promote the catalytic performance of a catalyst, but the defective catalysts are often prone to mechanical collapse if not properly synthesized. The uncontrollably formed defects also make it difficult to systematically investigate their effects on the catalytic performance. Herein, we report an efficient method of ionic reductive complexation extraction (IRCE) to fabricate atomic vacancies in a transition metal based nanomaterial without damaging its nanostructure, turning the otherwise catalytically inactive material to an advanced catalyst towards water oxidation in alkaline electrolyte. Here nickel based layered double hydroxide mixed with Cu(ii) is used to demonstrate the concept. With a tunable content and uniform dispersion of Cu(ii) on the brucite layer of the LDH, a suitable complexing agent could specifically combine with and remove the target Cu(ii), thereby creating the desired vacancies. The resulting vacancy rich TM LDH is found to be an excellent OER electrocatalyst with a low overpotential and small Tafel slope, due to the purposely modulated geometric and electronic structures of the active sites, and the greatly decreased charge transfer resistance.

In situ growth of metallic Ag0 intercalated CoAl layered double hydroxides as efficient electrocatalysts for the oxygen reduction reaction in alkaline solutions

Metallic Ag⁰ intercalated CoAl LDHs synthesized via a facile redox process exhibited excellent ORR activity through a four-electron reduction process.

Recent Advance on Polyaniline or Polypyrrole-Derived Electrocatalysts for Oxygen Reduction Reaction

The fuel cell, as one of the most promising electrochemical devices, is sustainable, clean, and environmentally benign. The sluggish oxygen reduction reaction (ORR) is an important fuel cell cathodic reaction that decides the efficiency of the overall energy conversion. In order to improve ORR efficiency, many efficient catalysts have been developed, in which the N-doped material is most popular. Polyaniline and polypyrrole as common aromatic polymers containing nitrogen were widely applied in the N-doped material. The shape-controlled N-doped carbon material can be prepared from the pyrolysis of the polyaniline or polypyrrole, which is effective to catalyze the ORR. This review is focused on the recent advance of polyaniline or polypyrrole-based ORR electrocatalysts.

Micrometer-sized dihydrogenphosphate-intercalated layered double hydroxides: synthesis, selective infrared absorption properties, and applications as agricultural films

High-performance heat-retention agents for multifunctional green agricultural films are today largely suitable to increase the production yield as well as to save energy. Here, an adapted ammonia releasing hydrothermal method was used to produce a series of micrometer-sized carbonate-layered double hydroxide (CO₃-LDH) precursors of sizes ranging from 1.32 μm to 8.64 μm by simply adjusting the feeding Mg²⁺ concentration from 0.80 mol L^-1 to 0.20 mol L^-1. From these pristine LDH materials, μm-sized dihydrogenphosphate-intercalated LDHs (H₂PO₄-LDHs) were prepared by an anion-exchange method. The structure, the platelet size, and the associated selective IR absorption properties of the H₂PO₄-LDH and the derivative H₂PO₄-LDH/EVA composite as well as the related visible transmittance and the photostability of the H₂PO₄-LDH/EVA film were investigated. The results show that the selective IR absorption in the wavelength range of 7-14 μm enabling the heat retention of the H₂PO₄-LDHs and H₂PO₄-LDH/EVA composites depends on the corresponding number-averaged particle size of H₂PO₄-LDH in the range of 2.01 μm to 8.80 μm. Compared with EVA, the H₂PO₄-LDH/EVA composites demonstrate a significant improvement of selective IR absorption, while maintaining acceptable visible transmittance, and similar photostability. An optimized particle size of H₂PO₄-LDH of ca. 5.85 μm leads to 60% selective IR absorption and 64% selective IR absorption when dispersed in EVA, while the polymer free of filler exhibits less than 50% absorption in the 7-14 μm IR domain.