PdRu alloy nanoparticles of solid solution in atomic scale: outperformance towards formic acid electro-oxidation in acidic medium

IMPACT: Innovative (nano)Materials and processes for advanced catalytic technologies to degrade PFOA in water

We hereby report the development of a novel electrochemical method to degrade perfluorooctanoic acid (C7F15COOH, PFOA). At the center of the approach are bimetallic Pd-Ru nano-catalyst materials called IMPACT: Innovative (nano)Materials and Processes for Advanced Catalytic Technologies. IMPACT uses flavonoid-sequestered Pd-Ru, allowing the development of specialized electrodes with tunable properties to sequentially degrade PFOA in wastewater samples into a sustainable byproduct via an indirect electrochemical method. Electron transfers at RuOxHy species stabilize the Pd component of the nano-catalysts, enabling the degradation process via PFOA deprotonation, chain shortening, decarboxylation, hydrolysis, fluoride elimination, and CF2 flake-off mechanism. IMPACT enabled the observation of redox peaks at -0.26 V and 0.56 V for the first time, with accompanying reduction peaks at -0.5V and 0.29 V, respectively. These redox peaks, which correlated with the concentrations of PFOA (20, 50, 100, 200, and 400. mg L-1), were verified and confirmed using electrochemical simulations. Control experiments did not show degradation of PFOA in the absence of Pd-Ru nano-catalyst. The degradation in wastewater was obtained within 3 h with an efficiency of 98.5%. The electrochemical degradation products of PFOA were identified using High-resolution desalting paper spray mass spectrometry (DPS-MS) and collision-induced dissociation (CID) analysis. The results yielded C2F5COOH, C3F7COOH, and C6F13OH with dissociation losses of CF2O or CO2. IMPACT introduces a novel nano-catalyst with high efficiency and a reliable capability that defluorinates strong C-F bonds that are components of recalcitrant organics in myriad environmental matrices.

Hot Carrier Lifetimes and Electrochemical Water Dissociation Enhanced by Nickel Doping of a Plasmonic Electrocatalyst

Hot carriers generated by localized surface plasmon resonance (LSPR) excitation of plasmonic metal nanoparticles are known to enhance electrocatalytic reactions. However, the participation of plasmonically generated carriers in interfacial electrochemical reactions is often limited by fast relaxation of these carriers. Herein, we address this challenge by tuning the electronic structure of a plasmonic electrocatalyst. Specifically, we design an electrocatalyst for alkaline hydrogen evolution reaction (HER) that consists of nanoparticles of a ternary Cu-Pt-Ni ternary alloy. The CuPt alloy has both plasmonic attributes and electrocatalytic HER activity. Ni doping contributes an electron-deficient 3d band and fully filled 4s band, which promotes water adsorption and prolongs the lifetimes of excited carriers generated by plasmonic excitation. As an outcome, the Cu-Pt-Ni nanoparticles exhibit boosted activity for electrochemical water dissociation and HER under LSPR excitation.

Recent Advances in Anode Electrocatalysts for Direct Formic Acid Fuel Cells - Part I - Fundamentals and Pd Based Catalysts

Direct formic acid fuel cells (DFAFCs) have gained immense importance as a source of clean energy for portable electronic devices. It outperforms other fuel cells in several key operational and safety parameters. However, slow kinetics of the formic acid oxidation at the anode remains the main obstacle in achieving a high power output in DFAFCs. Noble metal-based electrocatalysts are effective, but are expensive and prone to CO poisoning. Recently, a substantial volume of research work have been dedicated to develop inexpensive, high activity and long lasting electrocatalysts. Herein, recent advances in the development of anode electrocatalysts for DFAFCs are presented focusing on understanding the relationship between activity and structure. This review covers the literature related to the electrocatalysts based on noble metals, non-noble metals, metal-oxides, synthesis route, support material, and fuel cell performance. The future prospects and bottlenecks in the field are also discussed at the end.

Trimetallic Ru@AuPt core-shell nanostructures: The effect of microstrain on CO adsorption and electrocatalytic activity of formic acid oxidation

It is desirable to unravel the correlation between the geometric and electronic structures and the activity and further prepare high-performance electrocatalysts. Here in this paper, trimetallic Ru@Au-Pt core-shell nanoparticles were prepared by sequential ethanol reduction method, and further subject to characterization of X-ray diffraction, high angle annular dark field transmission electron microscopy, X-ray photoelectron spectroscopy and electrochemical CO stripping. Further analysis based on Williamson-Hall method revealed that the Au/Pt atomic ratio and shell thickness result in apparent variation of micro-strain and CO binding energy of Ru@AuPt nanoparticles, where the CO oxidation peak potential showed an inverted volcano-shape dependence on the microstrain of the metal nanoparticles while the catalytic activity towards electrooxidation of formic acid is linearly dependent on the micro-strain. The best Ru@Au-Pt catalyst delivers a specific activity of 4.14 mA cm^-2, which is 52 times that of Pt/C, respectively. This study indicated that the microstrain and stacking fault of metal nanoparticles might be a good descriptor for the catalytic activity and may shed light the rational design, synthesis and surface engineering towards the high-performance electrocatalyst.

Anchoring nanosized Pd on three-dimensional boron- and nitrogen-codoped graphene aerogels as a highly active multifunctional electrocatalyst for formic acid and methanol oxidation reactions

A facile and scalable strategy is developed for the preparation of nanosized Pd crystals anchored on 3D B- and N-codoped graphene aerogels, which show multifunctional electrocatalytic ability.

Synergy between Plasmonic and Electrocatalytic Activation of Methanol Oxidation on Palladium-Silver Alloy Nanotubes

Localized surface plasmon resonance (LSPR) excitation of noble metal nanoparticles has been shown to accelerate and drive photochemical reactions. Here, LSPR excitation is shown to enhance the electrocatalysis of a fuel-cell-relevant reaction. The electrocatalyst consists of Pd_x Ag alloy nanotubes (NTs), which combine the catalytic activity of Pd toward the methanol oxidation reaction (MOR) and the visible-light plasmonic response of Ag. The alloy electrocatalyst exhibits enhanced MOR activity under LSPR excitation with significantly higher current densities and a shift to more positive potentials. The modulation of MOR activity is ascribed primarily to hot holes generated by LSPR excitation of the Pd_x Ag NTs.

Revealing the Formation Mechanism of Alloyed Pd-Ru Nanoparticles: A Conversion Measurement Approach Utilizing a Microflow Reactor

The synthesis of alloyed nanoparticles has been studied extensively; however, the formation mechanisms involved remain unclear. Here, we reveal the detailed formation mechanism of alloyed nanoparticles in a Pd-Ru system, using a semibatch polyol method in which the simultaneous rapid reduction of both precursors was assumed to be the critical mechanism. We employed a microflow reactor to realize rapid heating and cooling. A significant difference in the reaction rate between the two precursors was observed. Pd was reduced within seconds, but the reduction of Ru was 2 orders of magnitude slower than that of Pd and was not as rapid as previously assumed. Further investigation of the semibatch method was performed to trace changes in the particle sizes and composition. Through quantitative and multilateral evidence, we concluded that the formation of low-crystallinity seeds, followed by solid-state diffusion, is the governing mechanism for the formation of alloyed Pd-Ru nanoparticles.

Oxygen Reduction Reaction and Hydrogen Evolution Reaction Catalyzed by Pd–Ru Nanoparticles Encapsulated in Porous Carbon Nanosheets

Developing bi-functional electrocatalysts for both oxygen reduction reaction (ORR) and hydrogen evolution reaction (HER) is crucial for enhancing the energy transfer efficiency of metal–air batteries and fuel cells, as well as producing hydrogen with a high purity. Herein, a series of Pd–Ru alloyed nanoparticles encapsulated in porous carbon nanosheets (CNs) were synthesized and employed as a bifunctional electrocatalyst for both ORR and HER. The TEM measurements showed that Pd–Ru nanoparticles, with a size of approximately 1–5 nm, were uniformly dispersed on the carbon nanosheets. The crystal and electronic structures of the PdxRu100−x/CNs series were revealed by powder X-ray diffraction (XRD) and X-ray photoelectron spectroscopy (XPS). The as-prepared samples exhibited effective ORR activity in alkaline media and excellent HER activity in both alkaline and acid solutions. The Pd50Ru50/CNs sample displayed the best activity and stability among the series, which is comparable and superior to that of commercial 10% Pd/C. For ORR, the Pd50Ru50/CNs catalyst exhibited an onset potential of 0.903 V vs. RHE (Reversible Hydrogen Electrode) and 11.4% decrease of the current density after 30,000 s of continuous operation in stability test. For HER, the Pd50Ru50/CNs catalyst displayed an overpotential of 37.3 mV and 45.1 mV at 10 mA cm−2 in 0.1 M KOH and 0.5 M H2SO4, respectively. The strategy for encapsulating bimetallic alloys within porous carbon materials is promising for fabricating sustainable energy toward electrocatalysts with multiple electrocatalytic activities for energy related applications.

Porous three-dimensional network of Pd–Cu aerogel toward formic acid oxidation

New self-assembled architectures have received great interest in nanotechnology, and are a highly desired target in recent studies.