Improved Surface Charge Transfer in MoO3/BiVO4 Heterojunction Film for Photoelectrochemical Water Oxidation

Investigation of BiVO4-based advanced oxidation system for decomposition of organic compounds and production of reactive sulfate species

Growth of population and expansion of industries lead to increasing contamination of environment with various organic pollutants. If not properly cleaned, wastewater contaminates freshwater resources, aquatic environment and has huge negative impact on ecosystems, quality of drinking water and human health, therefore new and effective purification systems are in demand. In this work bismuth vanadate-based advanced oxidation system (AOS) for the decomposition of organic compounds and production of reactive sulfate species (RSS) was investigated. Pure and Mo-doped BiVO₄ coatings were synthesized using sol-gel process. Composition and morphology of coatings were characterized using X-ray diffraction and scanning electron microscopy techniques. Optical properties were analyzed using UV-vis spectrometry. Photoelectrochemical performance was studied using linear sweep voltammetry, chronoamperometry and electrochemical impedance spectroscopy. It was shown that increase in Mo content affects the morphology of BiVO₄ films, reduces charge transfer resistance and enhances the photocurrent in the solutions of sodium borate buffer (with and without glucose) and Na₂SO₄. Mo-doping of 5-10 at.% leads to 2- to 3-fold increase in photocurrents. Faradaic efficiencies of RSS formation ranged between 70 and 90 % for all samples irrespective of Mo content. All studied coatings demonstrated high stability in long-lasting photoelectrolysis. In addition, effective light-assisted bactericidal performance of the films in deactivation of Gram positive Bacillus sp. bacteria was demonstrated. Advanced oxidation system designed in this work can be applied in sustainable and environmentally friendly water purification systems.

The versatile family of molybdenum oxides: synthesis, properties, and recent applications

The family of molybdenum oxides has numerous advantages that make them strong candidates for high-value research and various commercial applications. The variation of their multiple oxidation states allows their existence in a wide range of compositions and morphologies that converts them into highly versatile and tunable materials for incorporation into energy, electronics, optical, and biological systems. In this review, a survey is presented of the most general properties of molybdenum oxides including the crystalline structures and the physical properties, with emphasis on present issues and challenging scientific and technological aspects. A section is devoted to the thermodynamical properties and the most common preparation techniques. Then, recent applications are described, including photodetectors, thermoelectric devices, solar cells, photo-thermal therapies, gas sensors, and energy storage.

Photoelectrochemical Performance Improving Mechanism: Hybridization Appearing at the Energy Band of BiVO4 Photoanode by Doped Quantum Layers Modification

Surface passivation of the photoelectrode by wide bandgap semiconductor quantum layer is an important strategy to improve work stability and surface state inhibition. However, an inevitable energy barrier is generated during the quantum tunneling process of the photocarriers. To overcome this shortage, a tandem photo-generated hole transfer route is fabricated on BiVO₄ photoanode by doped dual-quantum layers modification, Ni-ZnO (5 nm) and Rh-SrTiO₃ (≈10 nm). Modulated photoelectrochemical (PEC), Scanning Kelvin Probe (SKP), and DFT calculation method results indicate that a tandem hole ohmic contact route is formed in the photoanode to reduce the quantum tunneling energy barrier, meanwhile, the photon absorption capacity of BiVO₄ is improved after doped quantum layers modification. Both a phenomenal attribute to the energy band hybridization between Ni, Rh 3d orbits in quantum layers with BiVO₄ photoanode. Then, the modified BiVO₄ photoanode achieves the recoded photocurrent density of 6.47 and 5.18 mA cm^-2 (Na₂ SO₃ electrolyte, V_RHE  = 1.23 V) under simulated sun light (100 mW cm^-2 AM 1.5 G) by xenon lamp illumination without and with UV composition cutting down to ≈5%, respectively. Generally, this work will highlight a potential application in the fields of PEC water splitting and photovoltaic conversion for various semiconductor nanomaterials.

Morphology-dependent MoO3/Ni-F nanostructures with enhanced electrochemical hydrogen peroxide detection

The present report investigates the various MoO₃ morphologies prepared via different approaches such as morphologies are cubic sheet, ribbon, and hexagonal sheet. These prepared nanostructures are modified as a MoO₃/Ni-F electrode used to detect hydrogen peroxide (H₂O₂). The influence of the morphology on the microstructural, morphological, electronic state, optical and electrochemical properties of MoO₃ nanostructures are systematically studied. The recorded XRD spectra confirmed that the good crystalline nature with the orthorhombic crystal structure. The FESEM analysis shows that preparation approaches strongly influenced the MoO₃ morphology. The elemental mapping and XPS analysis confirm the formation of MoO₃. The obtained optical band gap values show that the MoO₃ morphology-based bandgap values are 3.38, 3.17, and 2.94 eV. The modified MoO₃/Ni-F electrode electrochemical impedance spectra show the CP-MoO₃ has good conductivity. Moreover, the CP-MoO₃/Ni-F electrode has a wide detection window, long-term stability, reproducibility, and a low detection limit is 1.2 μM. Hence, the CP-MoO₃/Ni-F electrode electrochemical results suggest that the modified electrode has offered a good matrix for toxic contaminants sensing applications.

Improvement in NO2 Gas Sensing Properties of Semiconductor-Type Sensors by Loading Pt into BiVO4 Nanocomposites at Room Temperature

In the present study, we report the first attempt to prepare a conducive environment for Pt/BiVO₄ nanocomposite material reusability for the promotion of sustainable development. Here, the Pt/BiVO₄ nanocomposite was prepared using a hydrothermal method with various weight percentages of platinum for use in NO₂ gas sensors. The surface morphologies and structure of the Pt/BiVO₄ nanocomposite were characterized by scanning electron microscope (SEM), transmission electron microscopy (TEM), energy-dispersive X-ray spectroscopy (EDX), and X-ray diffraction (XRD). The results showed that Pt added to BiVO₄ with 3 wt.% Pt/BiVO₄ was best at a concentration of 100 ppm NO₂, with a response at 167.7, and a response/recovery time of 12/35 s, respectively. The Pt/BiVO₄ nanocomposite-based gas sensor exhibits promising nitrogen dioxide gas-sensing characteristics, such as fast response, highly selective detection, and extremely short response/recovery time. Additionally, the mechanisms of gas sensing in Pt/BiVO₄ nanocomposites were explored in this paper.

Deposition of zinc cobaltite nanoparticles onto bismuth vanadate for enhanced photoelectrochemical water splitting

During the past few decades, photoelectrochemical (PEC) water splitting has attracted significant attention because of the reduced production cost of hydrogen obtained by utilizing solar energy. Significant efforts have been invested by the scientific community to produce stable ternary metal oxide semiconductors, which can enhance the stability and increase the overall production of oxygen. Herein, we present the ternary metal oxide deposition of ZnCo₂O₄ as a route to obtain a novel photocatalyst layer on BiVO₄ to form BiVO₄/ZnCo₂O₄ a novel composite photoanode for PEC water splitting. The structural, topographical, and optical analyses were performed using field emission scanning electron microscopy, X-ray diffraction, high-resolution transmission electron microscopy, and UV-Vis spectroscopy to confirm the structure of the ZnCo₂O₄ grafted over BiVO₄. A remarkable 4.4-fold enhancement of the photocurrent was observed for the BiVO₄/ZnCo₂O₄ composite compared with bare BiVO₄ under visible illumination. The optimum loading of ZnCo₂O₄ over BiVO₄ yields unprecedented stable photocurrent density with an apparent cathodic shift of 0.46 V under 1.5 AM simulated light illumination. This is also evidenced by the flat-band potential change through Mott-Schottky analysis, which reveals the formation of p-ZnCo₂O₄ on n-BiVO₄. The improvement in the PEC performance of the composite with respect to bare BiVO₄ is ascribed to the formation of thin passivating layer of p-ZnCo₂O₄ on n-BiVO₄ which improves the kinetics of interfacial charge transfer. Based on our study, we have gained an in-depth understanding of the BiVO₄/ZnCo₂O₄ composite as high potential in efficient PEC water splitting devices.

A review on dimensionally controlled synthesis of g-C3N4 and formation of an isotype heterojunction for photocatalytic hydrogen evolution

g-C3N4-based isotype heterojunction towards visible light induced photocatalytic H2 generation.

Architecting a Double Charge-Transfer Dynamics In2S3/BiVO4 n-n Isotype Heterojunction for Superior Photocatalytic Oxytetracycline Hydrochloride Degradation and Water Oxidation Reaction: Unveiling the Association of Physicochemical, Electrochemical, and Photocatalytic Properties

To surmount incompatibility provoked efficiency suppression of an anisotype heterojunction and to pursue an improved intrinsic photocatalytic activity by manipulating oriented transfer of photoinduced charge carriers, an In₂S₃/BiVO₄ (1:1) n-n isotype heterojunction was fabricated successfully through a simple two-step calcination method, followed by a wet-chemical deposition method. The formation of an n-n isotype heterojunction was confirmed by X-ray diffraction, Fourier transform infrared spectroscopy, X-ray photoelectron spectroscopy, and UV-visible diffuse reflectance spectroscopy. The photocatalytic efficiency of the In₂S₃/BiVO₄ catalyst was examined over degradation of oxytetracycline hydrochloride (O-TCH) and oxygen (O₂) evolution reaction. Consequently, an n-n In₂S₃/BiVO₄ isotype heterojunction exhibits a superior O-TCH degradation efficiency (94.6%, 120 min) and O₂ evolution (695.76 μmol, 120 min) of multiple folds as compared to the pure BiVO₄ and In₂S₃ solely. This is attributed to the proper band alignment and intimate interfacial interaction promoted charge carrier separation over the n-n isotype heterojunction. The intimate interfacial contact was confirmed by transmission electron microscopy (TEM), high-resolution TEM, and field emission scanning electron microscopy analysis. The proper band alignment was confirmed by Mott-Schottky analysis. The photoelectrochemical linear sweep voltammetric study shows a superior photocurrent density (269 μA/cm²) for In₂S₃/BiVO₄ as compared to those for pristine BiVO₄ and In₂S₃, which is in good agreement with the photocatalytic results. Furthermore, the superior charge antirecombination efficiency of the n-n isotype heterojunction was established by photoluminescence, electrochemical impedance spectroscopy, Bode analysis, transient photocurrent, and carrier density analysis. The improved photostability of the heterojunction was confirmed by chronoamperometry analysis. An orderly corelationship among physicochemical, electrochemical, and photocatalytic properties was established, and a possible mechanistic pathway was presented to better understand the outcome of the n-n isotype heterojunction. This study presents an effective way to develop new n-n isotype heterojunction-based efficient photocatalysts and could enrich wide applications in other areas.

The design and growth of peanut-like CuS/BiVO4 composites for photoelectrochemical sensing

In this study, the CuS/BiVO₄-X (where X represents the mass percentage of CuS associated with CuS/BiVO₄; X = 2%, 5% and 7%) p–n heterostructures were fabricated using a two-step hydrothermal method.

Nanostructured MoO3 for Efficient Energy and Environmental Catalysis

This paper mainly focuses on the application of nanostructured MoO₃ materials in both energy and environmental catalysis fields. MoO₃ has wide tunability in bandgap, a unique semiconducting structure, and multiple valence states. Due to the natural advantage, it can be used as a high-activity metal oxide catalyst, can serve as an excellent support material, and provide opportunities to replace noble metal catalysts, thus having broad application prospects in catalysis. Herein, we comprehensively summarize the crystal structure and properties of nanostructured MoO₃ and highlight the recent significant research advancements in energy and environmental catalysis. Several current challenges and perspective research directions based on nanostructured MoO₃ are also discussed.

Photoinduced K+ Intercalation into MoO3/FTO Photoanode—the Impact on the Photoelectrochemical Performance

In this work, thin layers of MoO3 were tested as potential photoanodes for water splitting. The influence of photointercalation of alkali metal cation (K+) into the MoO3 structure on the photoelectrochemical properties of the molybdenum trioxide films was investigated for the first time. MoO3 thin films were synthesized via thermal annealing of thin, metallic Mo films deposited onto the FTO substrate using a magnetron sputtering system. The Tauc and Mott–Schottky plots analysis were performed in order to determine the energy bands position of the investigated material. The photointercalation effect of K+ on photoelectrochemical properties of FTO/MoO3 photoanodes was studied using electrochemical techniques performed under simulated solar light illumination. It was proven that pristine MoO3 layers cannot act as effective photoanodes for water splitting due to the utilization of the photoexcited electrons in the intercalation process. The photochromic phenomenon related to Mo6+ centers reduction, and K+ intercalation occurs at a potential range in which the photoanode exhibits photoelectrochemical activity towards water photooxidation.

Ultrathin TiO2/BiVO4 nanosheet heterojunction arrays modified with NiFe-LDH nanoparticles for enhanced photoelectrochemical oxidation of water

Herein, we have constructed NiFe-LDH nanoparticles modified ultrathin TiO₂/BiVO₄ nanosheet heterojunction arrays and explored the effects of different NiFe-LDH loading amount on photoelectrochemical water oxidation performance. The photocurrent of as-prepared TiO₂/BiVO₄/NiFe-LDH photoanode is about 2.5 times than that of TiO₂/BiVO₄, which is ascribed to the synergistic effect of heterojunction and co-catalyst. The heterojunction between TiO₂ and BiVO₄ suppresses the recombination of photogenerated electron-hole pairs effectively and the co-catalyst of NiFe-LDH accelerates the surface water oxidation reaction kinetics.

Boosted Water Oxidation Activity and Kinetics on BiVO4 Photoanodes with Multihigh-Index Crystal Facets

The crystal facet of the BiVO₄ photoanode has potential influence on its charge-transfer and separation properties as well as water oxidation kinetics. In the present work, a BiVO₄ polyhedral film with exposed {121}, {132}, {211}, and {251} high-index facets was synthesized by a facile Bi₂O₃ template-induced method and investigated as a photoanode for water oxidation. In comparison with the normal BiVO₄ film with a {121} monohigh-index facet, the BiVO₄ film with multihigh-index crystal facets shows higher activity and faster kinetics for photoelectrochemical water oxidation. Specifically, a higher photocurrent density of 1.21 mA/cm² was achieved on the multihigh-index facet BiVO₄ photoanode at 1.23 V versus reversible hydrogen electrode (RHE) in 0.1 M Na₂SO₄, which is about 200% improved over the normal BiVO₄ photoanode (0.61 mA/cm² at 1.23 V vs RHE). In addition, a negative shift of 300 mV onset potential for water oxidation was observed on the as-prepared BiVO₄ photoanode (0.22 V vs RHE) relative to the normal BiVO₄ photoanode (0.52 V vs RHE) in 0.1 M Na₂SO₄. Although the UV-vis absorbance property and water oxidation pathway not be changed, the charge-transfer and separation properties as well as the overall water oxidation kinetics on the multihigh-index facet BiVO₄ film were boosted obviously. Theory calculations reveal that the adsorption of H₂O molecules on BiVO₄{121} and {132} high-index facets is energetically favorable for subsequent dissociation and oxidation relative to that on {010} and {110} low-index facets. Furthermore, the water oxidation limiting step on {121} and {132} high-index facets of BiVO₄ is changed to the step of two protons reacting with •O to form •OOH species (•O + H₂O_(l) + 2H⁺ + 2e^- → •OOH + 3H⁺ + 3e^-), which is different from the limiting step on {010} and {110} low-index facets that corresponds to the dissociation of H₂O to •OH (2H₂O_(l) + • → •OH + H₂O_(l) + H⁺ + e^-). In addition, the overpotential of water oxidation limiting step on BiVO₄{121} and {132} high-index facets is lower than that on {010} and {110} low-index facets.

Improving photoelectrochemical reduction of Cr(VI) ions by building α-Fe2O3/TiO2 electrode

Photoelectrochemical process is an environmentally friendly technology and has a wide application in the control of environmental pollutants. Efficient nanophotocatalysts responsive to visible light are still highly attractive. In this work, α-Fe₂O₃/TiO₂ were grown on fluorine doped tin oxide (FTO) substrates by hydrothermal method for photoelectrochemical reduction of Cr(VI). Compared with the separate α-Fe₂O₃ and TiO₂ electrodes, the composite α-Fe₂O₃/TiO₂ electrodes show higher photocurrent density. Under visible light irradiation, 100% removal efficiency of Cr(VI) was obtained after 40 min treatment. The composite α-Fe₂O₃/TiO₂ electrodes showed an enhanced absorbance in visible light region and had good stability to photoelectrochemical reduction of Cr(VI). The role of hole scavengers (citric acid and oxalic acid) and pH values was systematically investigated. This novel intensification approach provides new insight on the application of photoelectrochemical reduction in environmental remediation.