Electrodeposition of cobalt nanowires into alumina templates generated by one-step anodization

3D Bioprintable Hypoxia-Mimicking PEG-Based Nano Bioink for Cartilage Tissue Engineering

As hypoxia plays a significant role in the formation and maintenance of cartilage tissue, aiming to develop native hypoxia-mimicking tissue engineering scaffolds is an efficient method to treat articular cartilage (AC) defects. Cobalt (Co) is documented for its hypoxic-inducing effects in vitro by stabilizing the hypoxia-inducible factor-1α (HIF-1α), a chief regulator of stem cell fate. Considering this, we developed a novel three-dimensional (3D) bioprintable hypoxia-mimicking nano bioink wherein cobalt nanowires (Co NWs) were incorporated into the poly(ethylene glycol) diacrylate (PEGDA) hydrogel system as a hypoxia-inducing agent and encapsulated with umbilical cord-derived mesenchymal stem cells (UMSCs). In the current study, we investigated the impact of Co NWs on the chondrogenic differentiation of UMSCs in the PEGDA hydrogel system. Herein, the hypoxia-mimicking nano bioink (PEGDA+Co NW) was rheologically optimized to bioprint geometrically stable cartilaginous constructs. The bioprinted 3D constructs were evaluated for their physicochemical characterization, swelling-degradation behavior, mechanical properties, cell proliferation, and the expression of chondrogenic markers by histological, immunofluorescence, and reverse transcription-quantitative polymerase chain reaction (RT-qPCR) methods. The results disclosed that, compared to the control (PEGDA) group, the hypoxia-mimicking nano bioink (PEGDA+Co NW) group outperformed in print fidelity and mechanical properties. Furthermore, live/dead staining, double-stranded DNA (dsDNA) content, and glycosaminoglycans (GAGs) content demonstrated that adding low amounts of Co NWs (<20 ppm) into PEGDA hydrogel system supported UMSC adhesion, proliferation, and differentiation. Histological and immunofluorescence staining of the PEGDA+Co NW bioprinted structures revealed the production of type 2 collagen (COL2) and sulfated GAGs, rendering it a feasible option for cartilage repair. It was further corroborated by a significant upregulation of the hypoxia-mediated chondrogenic and downregulation of the hypertrophic/osteogenic marker expression. In conclusion, the hypoxia-mimicking hydrogel system, including PEGDA and Co²⁺ ions, synergistically directs the UMSCs toward the chondrocyte lineage without using expensive growth factors and provides an alternative strategy for translational applications in the cartilage tissue engineering field.

Highly Efficient Recovery and Recycling of Cobalt from Spent Lithium-Ion Batteries Using an N-Methylurea-Acetamide Nonionic Deep Eutectic Solvent

The growing demand for lithium-ion batteries (LiBs) for the electronic and automobile industries combined with the limited availability of key metal components, in particular cobalt, drives the need for efficient methods for the recovery and recycling of these materials from battery waste. Herein, we introduce a novel and efficient approach for the extraction of cobalt, and other metal components, from spent LiBs using a nonionic deep eutectic solvent (ni-DES) comprised of N-methylurea and acetamide under relatively mild conditions. Cobalt could be recovered from lithium cobalt oxide-based LiBs with an extraction efficiency of >97% and used to fabricate new batteries. The N-methylurea was found to act as both a solvent component and a reagent, the mechanism of which was elucidated.

Templated electrodeposition as a scalable and surfactant-free approach to the synthesis of Au nanoparticles with tunable aspect ratios

A high-throughput method for the fabrication of ordered arrays of Au nanoparticles is presented. It is based on pulsed electrodeposition into porous anodic alumina templates. In contrast to many synthesis routes, it is cyanide-free, prior separation of the alumina template from the aluminium substrate is not required, and the use of contaminating surfactants/capping agents often found in colloidal synthesis is avoided. The aspect ratio of the nanoparticles can also be tuned by selecting an appropriate electrodeposition time. We show how to fabricate arrays of nanoparticles, both with branched bases and with hemispherical bases. Furthermore, we compare the different morphologies produced with electron microscopies and grazing-incidence synchrotron X-ray diffraction. We find the nanoparticles are polycrystalline in nature and are compressively strained perpendicular to the direction of growth, and expansively strained along the direction of growth. We discuss how this can produce dislocations and twinning defects that could be beneficial for catalysis.

In situ generation of Ni/Fe hydroxide layers by anodic etching of a Ni/Fe film for efficient oxygen evolution reaction

A Ni/Fe hydroxide electrocatalyst was fabricated via a simple and easily controlled method by combining anodic fluoridation and cyclic voltammetry (CV) treatment as an efficient catalyst for the OER.

Growth of Less than 20 nm SnO Nanowires Using an Anodic Aluminum Oxide Template for Gas Sensing

Stannous oxide (SnO) nanowires were synthesized by a template and catalyst-free thermal oxidation process. After annealing a Sn nanowires-embedded anodic aluminum oxide (AAO) template in air, we obtained a large amount of SnO nanowires. SnO nanowires were first prepared by electrochemical deposition and an oxidization method based on an AAO template. The preparation of SnO nanowires used aluminum sheet (purity 99.999%) and then a two-step anodization procedure to obtain a raw alumina mold. Finally, transparent alumina molds (AAO template) were obtained by reaming, soaking with phosphoric acid for 20 min, and a stripping process. We got a pore size of < 20 nm on the transparent alumina mold. In order to meet electroplating needs, we produced a platinum film on the bottom surface of the AAO template by using a sputtering method as the electrode of electroplating deposition. The structure was characterized by X-ray diffraction (XRD). High resolution transmission electron microscopy (HRTEM) and field emission scanning electron microscopy (FESEM) with X-ray energy dispersive spectrometer (EDS) were used to observe the morphology. The EDS spectrum showed that components of the materials were Sn and O. FE-SEM results showed the synthesized SnO nanowires have an approximate length of ~10–20 μm with a highly aspect ratio of > 500. SnO nanowires with a Sn/O atomic ratio of ~1:1 were observed from EDS. The crystal structure of SnO nanowires showed that all the peaks within the spectrum lead to SnO with a tetragonal structure. This study may lead to the use of the 1D structure nanowires into electronic nanodevices and/or sensors, thus leading to nano-based functional structures.

Effect of Growth Rate on the Crystal Orientation and Magnetization Performance of Cobalt Nanocrystal Arrays Electrodeposited from Aqueous Solution

The formation work of a two-dimensional hcp-Co (metallic cobalt crystal with hexagonal close packed structure) nucleus, W_hkl, was calculated by Pangarov's theory. W₀₀₂ was estimated to be smaller than W₁₀₀ in a cathode potential range nobler than the transition potential, E^tra (ca. -0.77 V vs. Ag/AgCl). To confirm the above estimation, ferromagnetic nanocomposite thick films, which contained (002) textured hcp-Co nanocrystal arrays, were synthesized by potentiostatic electrochemical reduction of Co²⁺ ions in anodized aluminum oxide (AAO) nanochannel films with ca. 45 µm thickness. The aspect ratio of hcp-Co nanocrystals with a diameter of ca. 25 nm reached up to ca. 1800. Our experimental results revealed that the texture coefficient, TC₀₀₂, increased when decreasing the overpotential for hcp-Co electrodeposition by shifting the cathode potential nobler than E^tra. In a similar way, TC₀₀₂ increased sharply by decreasing the growth rate of the hcp-Co nanocrystals so that it was smaller than the transition growth rate, R^tra (ca. 600 nm s^-1). The perpendicular magnetization performance was observed in AAO nanocomposite films containing hcp-Co nanocrystal arrays. With increasing TC₀₀₂, the coercivity of the nanocomposite film increased and reached up to 1.66 kOe, with a squareness of ca. 0.9 at room temperature.