Insights into the energy storage mechanism of hybrid supercapacitors with redox electrolytes by Electrochemical Impedance Spectroscopy

Experimental and computational investigation on the charge storage performance of a novel Al2O3-reduced graphene oxide hybrid electrode

The advancements in electrochemical capacitors have noticed a remarkable enhancement in the performance for smart electronic device applications, which has led to the invention of novel and low-cost electroactive materials. Herein, we synthesized nanostructured Al₂O₃ and Al₂O₃-reduced graphene oxide (Al₂O₃-rGO) hybrid through hydrothermal and post-hydrothermal calcination processes. The synthesized materials were subject to standard characterisation processes to verify their morphological and structural details. The electrochemical performances of nanostructured Al₂O₃ and Al₂O₃- rGO hybrid were evaluated through computational and experimental analyses. Due to the superior electrical conductivity of reduced graphene oxide and the synergistic effect of both EDLC and pseudocapacitive behaviour, the Al₂O₃- rGO hybrid shows much improved electrochemical performance (~ 15-fold) as compared to bare Al₂O₃. Further, a symmetric supercapacitor device (SSD) was designed using the Al₂O₃- rGO hybrid electrodes, and detailed electrochemical performance was evaluated. The fabricated Al₂O₃- rGO hybrid-based SSD showed 98.56% capacity retention when subjected to ~ 10,000 charge-discharge cycles. Both the systems (Al₂O₃ and its rGO hybrid) have been analysed extensively with the help of Density Functional Theory simulation technique to provide detailed structural and electronic properties. With the introduction of reduced graphene oxide, the available electronic states near the Fermi level are greatly enhanced, imparting a significant increment in the conductivity of the hybrid system. The lower diffusion energy barrier for electrolyte ions and higher quantum capacitance for the hybrid structure compared to pristine Al₂O₃ justify improvement in charge storage performance for the hybrid structure, supporting our experimental findings.

Electrochemical Capacitors with Confined Redox Electrolytes and Porous Electrodes

Electrochemical capacitors (ECs), including electrical-double-layer capacitors and pseudocapacitors, feature high power densities but low energy densities. To improve the energy densities of ECs, redox electrolyte-enhanced ECs (R-ECs) or supercapbatteries are designed through employing confined soluble redox electrolytes and porous electrodes. In R-ECs the energy storage is based on diffusion-controlled faradaic processes of confined redox electrolytes at the surface of a porous electrode, which thus take the merits of high power densities of ECs and high energy densities of batteries. In the past few years, there has been great progress in the development of this energy storage technology, particularly in the design and synthesis of novel redox electrolytes and porous electrodes, as well as the configurations of new devices. Herein, a full-screen picture of the fundamentals and the state-of-art progress of R-ECs are given together with a discussion and outlines about the challenges and future perspectives of R-ECs. The strategies to improve the performance of R-ECs are highlighted from the aspects of their capacitances and capacitance retention, power densities, and energy densities. The insight into the philosophies behind these strategies will be favorable to promote the R-EC technology toward practical applications of supercapacitors in different fields.

Regulating the Self-Discharge of Flexible All-Solid-State Supercapacitors by a Heterogeneous Polymer Electrolyte

Supercapacitors with high power density and an ultralong cyclic lifetime have been intensively investigated. However, the crucial challenge of their rapid self-discharge process is often neglected in most cases. A heterogeneous interface formed between two layers of polymer electrolytes is designed, in which a polyanion and a polycation are added into a common matrix of polymer electrolyte, respectively. By using the heterogeneous polymer electrolyte (HPE) as the separator simultaneously, the resultant supercapacitors exhibit comparable electrochemical performance to that of devices based on traditional polymer electrolytes. The HPE-based supercapacitors using both electric double-layer capacitive and pseudocapacitive electrodes show at least one time longer self-discharge time than that of devices based on homogenous polymer electrolyte, especially for the electrode in an electrolyte containing polyanion served as a positive pole during the charging process. Because of the same polymer matrix used, the heterojunction structure of the HPE exhibits excellent stability without obvious phase separation during thousands of charge/discharge and repeated bending cycles. This novel strategy by interface engineering of electrolyte to suppress the self-discharge behavior of supercapacitors is very meaningful to promote their practical applications.

Carbon dots conjugated nanocomposite for the enhanced electrochemical performance of supercapacitor electrodes

Naturally, a combination of metal oxides and carbon materials enhances the electrochemical performance of supercapacitor (SC) electrodes. We report on two different materials with highly conductive carbon dots (CDs) and a Co_0.5Ni_0.5Fe₂O₄/SiO₂/TiO₂ nanocomposite with a high power density, a high specific surface area, and a nanoporous structure to improve power and energy density in energy storage devices. A simple and low-cost process for synthesizing the hybrid SC electrode material Co_0.5Ni_0.5Fe₂O₄/SiO₂/TiO₂/CDs, known as CDs-nanocomposite, was performed via a layer-by-layer method; then, the CDs-nanocomposite was loaded on a nickel foam substrate for SC electrochemical measurements. A comparative study of the surface and morphology of CDs, the Co_0.5Ni_0.5Fe₂O₄/SiO₂/TiO₂ nanocomposite and CDs-nanocomposite was carried out using X-ray diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM), energy-dispersive X-ray spectroscopy (EDX), BET surface area, and Raman spectroscopy. The synthesized CDs-nanocomposite electrode material displayed enhanced electrochemical performance, having a high specific capacitance of 913.7 F g⁻¹ at a scan rate of 5 mV s⁻¹ and capacitance retention of 72.2%, as well as remarkable long-life cyclic stability over 3000 cycles in the three-electrode setup and 1 M KOH electrolyte. It also demonstrated a superior energy density of 130.7 W h kg⁻¹. The improved electrochemical behavior of the CDs-nanocomposite for SC electrodes, together with its fast and simple synthesis method, provides a suitable point of reference. Other kinds of metal oxide nanocomposites can be synthesized for use in energy storage devices.

Schematic diagram for the detailed steps of loading CDs-nanocomposite on nickel foam (NF) substrate to enhance the electrochemical performance of supercapacitor (SC) electrodes.

Porous TiO2/Co9S8 core-branch nanosheet arrays with high electrocatalytic activity for a hydrogen evolution reaction

Exploring new non-noble metallic catalysts with highly efficient and stable catalytic performance toward a hydrogen evolution reaction (HER) is a major requirement in the field of electrochemical water splitting. In this study, we report a facile strategy to synthesize a three-dimensional (3D) porous TiO₂/Co₉S₈ core-branch nanosheet arrays on Ni foam with superior HER catalytic activity. The hierarchically 3D porous architecture not only provides rich active sites, but also enables fast electron transport and easy electrolyte permeation. Consequently, the TiO₂/Co₉S₈ core-branch nanosheet arrays achieve a remarkably low overpotential of 150 mV at 10 mA cm^-2, small Tafel slope of 71 mV Dec^-1 and outstanding long-term stability for the HER reaction. The elaborate design should provide a new strategy to controllably synthesize porous and rational nanostructured materials as a prominent electrocatalyst for water splitting applications.

High-Performance Symmetrical Supercapacitor with a Combination of a ZIF-67/rGO Composite Electrode and a Redox Additive Electrolyte

The synthesis of a highly porous composite of ZIF-67 and reduced graphene oxide (rGO) using a simple stirring approach is reported. The composite has been investigated as an electrode to be assembled in a supercapacitor. In the presence of an optimized redox additive electrolyte (RAE), that is, 0.2 M K3[Fe(CN)6] in 1 M Na2SO4, the ZIF-67/rGO composite electrode has combined the properties of improved conductivity, high specific surface area, and low resistance. The proposed composite electrode in the three-electrode system shows an ultrahigh specific capacitance of 1453 F g-1 at a current density of 4.5 A g-1 within a potential window of -0.1 to 0.5 V. Further, the ZIF-67/rGO composite electrode was used to fabricate a symmetrical supercapacitor whose operation in the presence of the RAE has delivered high values of specific capacitance (326 F g-1 at a current density of 3 A g-1) and energy density (25.5 W h kg-1 at a power density of 2.7 kW kg-1). The device could retain about 88% of its initial specific capacitance after 1000 repeated charge-discharge cycles. The practical usefulness of the device was also verified by combining two symmetrical supercapacitors in series and then lighting a white light-emitting diode (illumination for 3 min). This study, for the first time, reports the application of a ZIF-based composite (ZIF-67/rGO) in the presence of an RAE to design an efficient supercapacitor electrode. This proposed design is also scalable to a flexible symmetric device delivering high values of specific capacitance and energy density.