A base-stable metal-organic framework for sensitive and non-enzymatic electrochemical detection of hydrogen peroxide

Coupling metal organic frameworks nanozyme with carbon nanotubes on the gradient porous hollow fiber membrane for nonenzymatic electrochemical H2O2 detection

In this paper, we present a gradient porous hollow fiber structure integrated the signal transduction within a microspace, serving as a platform for cellular metabolism monitoring. We developed a nonenzymatic electrochemical electrode by coupling carbon nanotubes (CNT) and metal organic frameworks (MOF) nanozyme on three-dimensional (3D) gradient porous hollow fiber membrane (GPF) for in-situ detection of cell released hydrogen peroxide (H2O2). The GPF was used as a substrate for cell culture as well as the supporting matrix of the working electrode. The ultrasonically coupled CNT@MOF composite was immobilized on the outer surface of the GPF by means of pressure filtration. Notably, the MOF, acting as a peroxidase mimic, exhibits superior stability compared to traditional horseradish peroxidase. The incorporation of CNT not only provided sufficient specific surface area to improve the uniform distribution of MOF nanozyme, but also formed 3D conductive network. This network efficiently facilitates the electrons transfer during the catalytic process of the MOF, addressing the inherent poor conductivity of MOFs. The GPF-CNT@MOF nonenzymatic bioelectrode demonstrated excellent electrocatalytic performance including rapid response, satisfactory sensing selectivity, and attractive stability, which enabled the development of a robust in-situ cellular metabolic monitoring platform.

A MOF nanozyme-mediated acetylcholinesterase-free colorimetric strategy for direct detection of organophosphorus pesticides

Although some simple and rapid colorimetric methods have been developed to detect organophosphorus pesticides (OPs), the difficult extraction and easy denaturation of acetylcholinesterase (AChE) are still drawbacks needing to be overcome. Here, we propose a MOF nanozyme-mediated AChE-free colorimetric strategy for the direct detection of OPs. In the presence of OPs (pirimiphos-methyl as a model), the intense blue of oxidized 3,3',5,5'-tetramethylbenzidine (TMB) becomes light due to the quenching effect of OPs towards hydroxyl radicals (˙OH) that are generated by the decomposition of H2O2 catalyzed by the Cu4Co6 ZIF nanozyme with excellent peroxidase (POD)-like activity. The developed colorimetric sensor exhibits assay performance and offers a universal and promising analysis strategy for detecting OPs in practical samples.

Design and Application of Electrochemical Sensors with Metal-Organic Frameworks as the Electrode Materials or Signal Tags

Metal-organic frameworks (MOFs) with fascinating chemical and physical properties have attracted immense interest from researchers regarding the construction of electrochemical sensors. In this work, we review the most recent advancements of MOF-based electrochemical sensors for the detection of electroactive small molecules and biological macromolecules (e.g., DNA, proteins, and enzymes). The types and functions of MOF-based nanomaterials in terms of the design of electrochemical sensors are also discussed. Furthermore, the limitations and challenges of MOF-based electrochemical sensing devices are explored. This work should be invaluable for the development of MOF-based advanced sensing platforms.

A review of synthesis, fabrication, and emerging biomedical applications of metal-organic frameworks

The overwhelming potential of porous coordination polymers (PCP), also known as Metal-Organic Frameworks (MOFs), especially their nanostructures for various biomedical applications, have made these materials worth investigating for more applications and uses. MOFs unique structure has enabled them for most applications, particularly in biomedical and healthcare. A number of very informative review papers are available on the biomedical applications of MOFs for the reader's convenience. However, many of those reviews focus mainly on drug delivery applications, and no significant work has been reported on other MOFs for biomedical applications. This review aims to present a compact and highly informative global assessment of the recent developments in biomedical applications (excluding drug-delivery) of MOFs along with critical analysis. Researchers have recently adopted both synthetic and post-synthetic routes for the fabrication and modification of MOFs that have been discussed and analyzed. A critical review of the latest reports on the significant and exotic area of bio-sensing capabilities and applications of MOFs has been given in this study. In addition, other essential applications of MOFs, including photothermal therapy, photodynamic therapy, and antimicrobial activities, are also included. These recently grown emergent techniques and cancer treatment options have gained attention and require further investigations to achieve fruitful outcomes. MOF's role in these applications has been thoroughly discussed, along with future challenges and valuable suggestions for the research community that will help meet future demands.

Applications of metal-organic framework-based bioelectrodes

Metal-organic frameworks (MOFs) are an emerging class of porous nanomaterials that have opened new research possibilities. The inherent characteristics of MOFs such as their large surface area, high porosity, tunable pore size, stability, facile synthetic strategies and catalytic nature have made them promising materials for enormous number of applications, including fuel storage, energy conversion, separation, and gas purification. Recently, their high potential as ideal platforms for biomolecule immobilization has been discovered. MOF-enzyme-based materials have attracted the attention of researchers from all fields with the expansion of MOFs development, paving way for the fabrication of bioelectrochemical devices with unique characteristics. MOFs-based bioelectrodes have steadily gained interest, wherein MOFs can be utilized for improved biomolecule immobilization, electrolyte membranes, fuel storage, biocatalysis and biosensing. Likewise, applications of MOFs in point-of-care diagnostics, including self-powered biosensors, are exponentially increasing. This paper reviews the current trends in the fabrication of MOFs-based bioelectrodes with emphasis on their applications in biosensors and biofuel cells.

Electrochemical Sensors for the Detection of Reactive Oxygen Species in Biological Systems: A Critical Review

Reactive oxygen species (ROS) involving superoxide anion, hydrogen peroxide and hydroxyl radical play important role in human health. ROS are known to be the markers of oxidative stress associated with different pathologies including neurodegenerative and cardiovascular diseases, as well as cancer. Accordingly, ROS level detection in biological systems is an essential problem for biomedical and analytical research. Electrochemical methods seem to have promising prospects in ROS determination due to their high sensitivity, rapidity, and simple equipment. This review demonstrates application of modern electrochemical sensors for ROS detection in biological objects (e.g., cell lines and body fluids) over a decade between 2011 and 2021. Particular attention is paid to sensors materials and various types of modifiers for ROS selective detection. Moreover, the sensors comparative characteristics, their main advantages, disadvantages and their possibilities and limitations are discussed.

Metal–Organic Frameworks for Electrocatalytic Sensing of Hydrogen Peroxide

The electrochemical detection of hydrogen peroxide (H₂O₂) has become more and more important in industrial production, daily life, biological process, green energy chemistry, and other fields (especially for the detection of low concentration of H₂O_2). Metal organic frameworks (MOFs) are promising candidates to replace the established H₂O₂ sensors based on precious metals or enzymes. This review summarizes recent advances in MOF-based H₂O₂ electrochemical sensors, including conductive MOFs, MOFs with chemical modifications, MOFs-composites, and MOF derivatives. Finally, the challenges and prospects for the optimization and design of H₂O₂ electrochemical sensors with ultra-low detection limit and long-life are presented.

Recent advancements in metal-organic frameworks composites based electrochemical (bio)sensors

Metal-organic frameworks (MOFs) are a novel class of crystalline materials which find widespread applications in the field of microporous conductors, catalysis, separation, biomedical engineering, and electrochemical sensing. With a specific emphasis on the MOF composites for electrochemical sensor applications, this review summarizes the recent construction strategies on the development of conductive MOF composites (post-synthetic modification of MOFs, in situ synthesis of functional materials@MOFs composites, and incorporating electroactive ligands). The developed composites are revealed to have excellent electrochemical sensing activity better than their pristine forms. Notably, the applicable functionalized MOFs to electrochemical sensing/biosensing of various target species are discussed. Finally, we highlight the perspectives and challenges in the field of electrochemical sensors and biosensors for potential directions of future development.

Simultaneous electrochemical determination of nitrophenol isomers based on macroporous carbon functionalized with amino-bridged covalent organic polycalix[4]arenes

A glassy carbon electrode (GCE) modified by a hybrid, macroporous carbon (MPC) functionalized with triazine bridged covalent organic polycalix[4]arenes (CalCOP) (CalCOP-MPC), has been fabricated and utilized for simultaneous detection of nitrophenols (NP). The obtained CalCOP-MPC were characterized by scanning electron microscope (SEM), transmission electron microscope (TEM), thermogravimetric analysis (TGA), Fourier transform infrared spectroscopy (FTIR), Raman spectroscopy, X-ray photoelectron spectroscopy (XPS), cyclic voltammetry (CV), and electrochemical impedance spectroscopy (EIS), which confirmed that MPC had functionalized with CalCOP successfully. Benefiting from the synergistic supramolecular effect of macrocyclic receptor of CalCOP and the excellent electrical properties of MPC, the anodic peaks of o-nitrophenol (o-NP), m-nitrophenol (m-NP), and p-nitrophenol (p-NP) in their mixture can be well separated by the prepared electrode. Differential pulse voltammetry (DPV) measurements at CalCOP-MPC/GCE revealed that the linear ranges of NP isomers were all 1-400 μM, and the detection limit limits were 0.383 μM, 0.122 μM, and 0.212 μM for o-NP, m-NP, and p-NP, respectively. Moreover, the prepared modified electrodes showed a relatively good selectivity and stability, implying the prospect for detecting NP in real environmental samples.

Rational design of ZnO@ZIF-8 nanoarrays for improved electrochemical detection of H2O2

Core–shell ZnO@ZIF-8 nanoarrays demonstrate remarkable electrochemical performance for detection of H2O2.

Hemin functionalized hybrid aerogel-enabled electrochemical chip for real-time analysis of H2O2

Herein, a novel hemin functionalized hybrid aerogel (He@GMA) is synthesized and applied to an electrochemical chip for real-time analysis of hydrogen peroxide (H2O2).

Cu-MOF/hemin: a bionic enzyme with excellent dispersity for the determination of hydrogen peroxide released from living cells

The stability, repeatability and sensitivity of an electrochemical biosensor material are closely connected with the dispersibility of metal organic frameworks (MOFs) in aqueous media. Herein, a nanocomposite based on Cu-MOF/hemin, which is not only highly water-soluble but also simple and efficient in synthesis, was used for the construction of a non-enzymatic sensor to detect hydrogen peroxide (H₂O₂). The Cu-MOF/hemin was characterized via scanning electron microscopy (SEM), transmission electron microscopy (TEM), energy dispersive X-ray spectroscopy (EDS)-mapping, X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FT-IR), X-ray photoelectron spectroscopy (XPS) and thermal gravimetric analysis (TGA), which indicate that hemin and the Cu-MOF were successfully combined. As a H₂O₂ electrochemical biomimetic enzyme, the Cu-MOF/hemin exhibited excellent electrocatalytic performance, which was confirmed by the electrochemical experiments and chromogenic reactions, and the possible mechanism of the reactions has been deduced. The electrochemical sensor based on the biomimetic enzyme exhibited an extended linear detection range from 0.01-5.0 mM (R = 0.998), low detection limit of 4.14 μM, and high selectivity and stability under the optimized conditions. More importantly, the practical application ability of the sensor was verified by the test of H₂O₂ in human serum samples and it could be used for the real-time detection of H₂O₂ released from living cells with satisfactory results. Therefore, this novel nanocomposite has certain potential in preparing electrochemical sensing platforms for nonenzymatic biosensing and provides a new method for clinical diagnosis and real-time monitoring.

Electrochemical sensor based on Ce-MOF/carbon nanotube composite for the simultaneous discrimination of hydroquinone and catechol

Ce-MOF/CNTs nanocomposites were prepared by a simple method and post-treated with NaOH/H₂O₂ mixed solution. The morphology and structure of the treated samples were characterized by transmission electron microscopy (TEM), scanning electron microscopy (SEM), X-ray diffraction (XRD) and X-ray photoelectron spectroscopy (XPS). The results show that the post treatment induces the Ce-MOF morphological changing from rod-like structure into particles, which are covered on the surface of CNTs. XPS demonstrates that there are two-valence (TV) of Ce³⁺/Ce⁴⁺ in the post-treated Ce-MOF/CNTs (TV) composite. The electrochemical behaviors of nanocomposite were also investigated on electrochemical work station. By utilization of the good electrical conductivity of CNT, the two-valence of Ce and the high surface area of MOF, the nanocomposites were used to fabricate the electrochemical sensor for the simultaneous electrochemical detection of hydroquinone (HQ) and catechol (CC). Compared to the Ce-MOF/CNTs/GCE, the post-treated Ce-MOF (TV)/CNTs/GCE exhibited two well-defined peaks for the electrochemical oxidation of HQ and CC. The linear ranges responding to HQ and CC are 10~100 μM and 5~50 μM respectively.

A novel MnO-CrN nanocomposite based non-enzymatic hydrogen peroxide sensor

A MnO–CrN composite was obtained via the ammonolysis of the low-cost nitride precursors Cr(NO₃)₃·9H₂O and Mn(NO₃)₂·4H₂O at 800 °C for 8 h using a sol–gel method. The specific surface area of the synthesized powder was measured via BET analysis and it was found to be 262 m² g⁻¹. Regarding its application, the electrochemical sensing performance toward hydrogen peroxide (H₂O₂) was studied via applying cyclic voltammetry (CV) and amperometry (i–t) analysis. The linear response range was 0.33–15 000 μM with a correlation coefficient (R²) value of 0.995. Excellent performance toward H₂O₂ was observed with a limit of detection of 0.059 μM, a limit of quantification of 0.199 μM, and sensitivity of 2156.25 μA mM⁻¹ cm⁻². A short response time of within 2 s was achieved. Hence, we develop and offer an efficient approach for synthesizing a new cost-efficient material for H₂O₂ sensing.

A MnO–CrN composite was obtained via the ammonolysis of the low-cost nitride precursors Cr(NO₃)₃·9H₂O and Mn(NO₃)₂·4H₂O at 800 °C for 8 h using a sol–gel method.

A metal-organic framework with multienzyme activity as a biosensing platform for real-time electrochemical detection of nitric oxide and hydrogen peroxide

A Metal-Organic Framework (MOFs) with large surface area, exposed active site, excellent catalytic performance and high chemical stability has been used as an artificial enzyme and designed for nonenzymatic electrochemical sensors. Here, a strategy of using an enhanced electrochemical sensing platform for the detection of nitic oxide (NO) and hydrogen peroxide (H2O2) was designed via a nano-metalloporphyrinic metal-organic framework (NporMOF(Fe)) as an electrode material. By taking advantage of the small size, high surface area and exposed Fe active site, the obtained NporMOF(Fe) displays excellent electrocatalytic activity toward NO and H2O2. The NporMOF(Fe) modified electrode shows high sensing ability toward the in situ generated NO in NO2- containing phosphate buffer (PB) solution with a wide linear detection range of 5 μM to 200 μM and a very low detection limit of 1.3 μM. Moreover, NporMOF(Fe) exhibits high electrocatalytic activity toward the reduction of H2O2 and the practical detection of H2O2 released from HeLa cells. Furthermore, the NporMOF(Fe) modified electrode shows excellent selectivity toward the detection of NO and H2O2 in the presence of other physiologically important analytes. This method shows excellent biosensing performance, implying the universal applicability of MOFs-based artificial nanozymes for biosensors and the potential application for third generation biosensors.

2D metal azolate framework as nanozyme for amperometric detection of glucose at physiological pH and alkaline medium

The synthesis of Co-based two-dimensional (2D) metal azolate framework nanosheets (MAF-5-Co^II NS) is described using a simple hydrothermal method. The product was isostructural to MAF-5 (Zn). The as-prepared MAF-5-Co^II NS exhibited high surface area (1155 m²/g), purity, and crystallinity. The MAF-5-Co^II NS-modified screen-printed electrode (MAF-5-Co^II NS/SPE) was used for nonenzymatic detection of glucose in diluted human blood plasma (BP) samples with phosphate buffer saline (PBS, pH 7.4) and NaOH (0.1 M, pH 13.0) solutions. The MAF-5-Co^II NS nanozyme displayed good redox activity in both neutral and alkaline media with the formation of Co^II/Co^III redox pair, which induced the catalytic oxidation of glucose. Under the optimized detection potential, the sensor presented a chronoamperometric current response for the oxidation of glucose with two wide concentration ranges in PBS-diluted (62.80 to 180 μM and 305 to 8055 μM) and NaOH-diluted (58.90 to 117.6 μM and 180 to 10,055 μM) BP samples, which were within the limit of blood glucose levels of diabetic patients before (4.4-7.2 mM) and after (10 mM) meals (recommended by the American Diabetes Association). The sensor has a limit of detection of ca. 0.25 and 0.05 μM, respectively, and maximum sensitivity of ca. 36.55 and 1361.65 mA/cm²/mM, respectively, in PBS- and NaOH-diluted BP samples. The sensor also displayed excellent stability in the neutral and alkaline media due to the existence of hydrophobic linkers (2-ethyl imidazole) in the MAF-5-Co^II NS, good repeatability and reproducibility, and interference-free signals. Thus, MAF-5-Co^II NS is a promising nanozyme for the development of the disposable type of sensor for glucose detection in human body fluids. Graphical abstract.

A hybrid of ultrathin metal-organic framework sheet and ultrasmall copper nanoparticles for detection of hydrogen peroxide with enhanced activity

Here, we design and synthesize a novel 2D Cu-tetrakis(4-carboxyphenyl)porphyrin (TCPP) metal-organic framework (MOF) sheet and ultrasmall Cu_5.4O nanoparticle (Cu_5.4O USNP) hybrid (Cu-TCPP MOF/Cu_5.4O nanocomposite). The graphene-like ultrathin Cu-TCPP MOF sheets offer high surface-to-volume atom ratios and many active sites, which is beneficial for loading more Cu_5.4O USNPs. The Cu_5.4O USNPs with ultrasmall size (<5 nm) have promising conductivity and excellent enzymatic ability for H₂O₂. The successfully prepared nanocomposites are characterized by transmission electron microscopy (TEM), scanning electron microscopy (SEM), X-ray photoelectron spectroscopy (XPS), X-ray diffraction (XRD), and Fourier transform infrared (FT-IR) techniques. The 2D graphene-like ultrathin Cu-TCPP MOF sheets show no H₂O₂-sensing signals, whereas Cu_5.4O USNPs exhibit a clear reduction peak for detection of H₂O₂. Interestingly, the combination of two kinds of nanomaterials improved the H₂O₂ sensing ability due to their synergistic effect. The properties of the unmodified electrodes and the Cu-TCPP MOF/Cu_5.4O nanocomposite-modified electrodes were systemically studied by cyclic voltammetry (CV), current-time (i-t) response, and square-wave voltammetry (SWV) techniques. The electrochemical sensor for the detection of H₂O₂ based on the Cu-TCPP MOF/Cu_5.4O nanocomposite has a lower detection limit of 0.13 μmol·L^-1 and wider linear range of 0.1 × 10^-6 ~ 0.59 × 10^-3 mol·L^-1 and 1.59 × 10^-3 ~ 20.59 × 10^-3 mol·L^-1 when compared with the Cu_5.4O USNPs-modified electrode. The electrochemical sensor can be further used to detect H₂O₂ produced by cells. Graphical abstract The mechanism for sensing H₂O₂ produced from cells based on a Cu-TCPP MOF/Cu_5.4O USNPs nanocomposite-modified electrode.

Electrochemical determination of artemisinin based on signal inhibition for the reduction of hemin

A novel electrochemical sensor was constructed for the determination of artemisinin (ART) based on the inhibition of redox for hemin caused by ART. As far as we know, this strategy for ART determination may be proposed for the first time. In this work, untreated multi-walled carbon nanotubes were cast on the glassy carbon electrode (GCE) as conductive carrier. We prepared a bimetallic organic framework named FeGd-MOF and combined it with hemin by a simple physical mixed method. Then, we fabricated the working electrode by layer-by-layer modification and immobilization. The sensor measured by the differential pulse voltammetry (DPV) technique had calibration curves for the determination of ART, which was 0.3-350 μM with the correlation coefficient R² = 0.9998. Furthermore, the obtained linear range could be practically used in real sample analysis such as dried leaves of Artemisia apiacea. Under the optimized condition, the electrochemical sensor exhibited high sensitivity, good stability, and excellent anti-interference performance. The limit of detection (LOD) for this sensor was 0.17 μM (signal to noise ratio, S/N = 3), which was much lower than that for some other reported electrochemical sensors. The recovery rates were in the range of 99.54-104.34% in real samples, indicating that the sensor had good repetition and high accuracy. Graphical abstract.

Determination of hydrogen peroxide released from cancer cells by a Fe-Organic framework/horseradish peroxidase-modified electrode

Multi-walled carbon nanotubes (MWCNTs) were used as conductive carrier on the glassy carbon electrode (GCE), and the hybrid of metal organic framework [NH₂-MIL-53(Fe)] and horseradish peroxidase (HRP) was prepared by simple physical mechanical mixture. The GCE modified by the above material with immobilization, namely NH₂-MIL-53(Fe)/HRP/MWCNTs/GCE, was used to construct an electrochemical biosensor toward H₂O₂. The results indicated that the addition of NH₂-MIL-53(Fe) had a good synergistic effect on the electron transfer of HRP and the detection of H₂O₂. Under the optimized condition, the biosensor exhibited excellent electrochemical performances such as low detection limit, high sensitivity, good stability and so on. The H₂O₂ biosensor showed two linear ranges of 0.1-1 μM and 1-600 μM with a calculated detection limit of 0.028 μM (signal-to-noise ratio, S/N = 3). In addition, the stability of the hybrid of NH₂-MIL-53(Fe) and HRP were discussed by SEM, XRD and UV-vis methods. Furthermore, the reported biosensors were practically used in direct detection of H₂O₂ released from HeLa and HepG2 cells successfully. Thus, this work provides a new strategy to fabricate electrochemical biosensors using MOFs and biomolecules.

A novel Fe-hemin-metal organic frameworks supported on chitosan-reduced graphene oxide for real-time monitoring of H2O2 released from living cells

Herein, a kind of novel hemin-based metal organic frameworks (Fe-hemin-MOFs) with unique peroxidase-like bioactivity was developed for the first time. The synthesized Fe-hemin-MOFs exhibited satisfactory catalytic activity toward hydrogen peroxide (H₂O₂). When it was further supported on Chitosan-reduced graphene oxide (CS-rGO), amplified electrochemical signal could be obtained. The Fe-hemin-MOFs/CS-rGO composite was used to construct a novel H₂O₂ electrochemical sensor. The electrocatalytic reduction of H₂O₂ displayed two segments linearity range from 1 to 61 μM and 61-1311 μM, as well as a low detection limit of 0.57 μM. Furthermore, the proposed sensor was successfully used for real-time monitoring of H₂O₂ released from living cells, which extended the practical application of MOFs-based sensors in monitoring the pathological process in living cells.

Continuous and Rapid Synthesis of UiO-67 by Electrochemical Methods for the Electrochemical Detection of Hydroquinone

Continuous and rapid synthesis of UiO-67 under mild conditions has been achieved by electrochemical methods for the first time. In the reaction system, a zirconium sheet was utilized as electrodes and a metal source for the assembly of UiO-67. High-crystalline UiO-67 with a regular tetrahedral morphology of around 1 μm was obtained within 1.5 h under the optimized solvent composition, voltage, and temperature conditions. This electrochemical synthetic method of UiO-67 in our work overcomes the shortcomings of high temperature and pressure of a traditional solvothermal method, which proposes new ideas for the large-scale and rapid synthesis of UiO-67. The UiO-67 synthesized by an electrochemical method was prepared as a UiO-67-carbon paste electrode (CPE), which exhibited a linear response to hydroquinone (HQ) in the range of 5-300 μM with a detection limit of 3.6 × 10^-9 M (S/N = 3), for the electrochemical detection of HQ. It was confirmed that UiO-67-CPE possessed excellent reusability and antiinterference ability for the detection of HQ, and its detection ability even did not change after standing for 3 months. We further tried to apply UiO-67-CPE to the practical determination of HQ in tap water and river water samples, and the results proved that the recovery rate is 97.9-104.7% in real samples.

Recent advances of electrochemical and optical enzyme-free glucose sensors operating at physiological conditions

Diabetes is a pathological condition that requires the continuous monitoring of glucose level in the blood. Its control has been tremendously improved by the application of point-of-care devices. Conventional enzyme-based sensors with electrochemical and optical transduction systems can successfully measure the glucose concentration in human blood, but they suffer from the low stability of the enzyme. Non-enzymatic wearable electrochemical and optical sensors, with low-cost, high stability, point-of-care testing and online monitoring of glucose levels in biological fluids, have recently been developed and can help to manage and control diabetes worldwide. Advances in nanoscience and nanotechnology have enabled the development of novel nanomaterials that can be implemented for the use in enzyme-free systems to detect glucose. This review summarizes recent developments of enzyme-free electrochemical and optical glucose sensors, as well as their respective wearable and commercially available devices, capable of detecting glucose at physiological pH conditions without the need to pretreat the biological fluids. Additionally, the evolution of electrochemical glucose sensor technology and a couple of widely used optical detection systems along with the glucose detection mechanism is also discussed. Finally, this review addresses limitations and challenges of current non-enzymatic electrochemical, optical, and wearable glucose sensor technologies and highlights opportunities for future research directions.

Zn- and Cd-based coordination polymers with a novel anthracene dicarboxylate ligand for highly selective detection of hydrogen peroxide

A one-dimensional {[Zn(L)(DMF)2]}n (1) and a three-dimensional {[Cd(L)(DMF)]·DMF}n (2) coordination polymer based on the novel anthracene derivative H2L (H2L = 4,4'-(9,10-anthracenediyl)dicinnamic acid) were obtained by solvothermal synthesis and charaterised by single-crystal and powder X-ray diffraction, thermogravimetry, and infrared spectroscopy. The anthracene derivative H2L and coordination polymers 1 and 2 were used to modify a glassy carbon electrode and as such served as an active material for detection of H2O2. Cyclic voltammograms in the potential range from 0 to -0.5 V revealed concentration-dependent cathodic current in all three cases with a lower detection limit of 200 μM. The electrode modified with compound 2 showed the best performance towards hydrogen peroxide detection. The results suggest that the development of electrodes modified with inorganic polymers based on highly conjugated ligands can serve as potential electrocatalytic materials.

A metal-free and preconcentration-free method for non-enzymatic amperometric determination of pentachlorophenol using a ZIF-derived hollow carbon material

An enzyme-free, metal-free, and preconcentration-free electrochemical sensor for pentachlorophenol assay has been fabricated. The interface of the sensor is based on a hollow zeolitic imidazolate framework-derived mesoporous carbon material (denoted as HZC/SPCE). The sensor exhibits linear amperometric response upon pentachlorophenol at 0.82 V (vs. Ag/AgCl) in the concentration range 0.001 to 26.8 mg L^-1 (3.75 × 10^-8~1.006 × 10^-4 M) (R² = 0.997). The sensitivity of HZC/SPCE is 3.53 × 10² μA mM^-1 cm^-2 with a detection limit of 2.05 × 10^-9 M (S/N = 3) for pentachlorophenol. The method has been applied to the determination of pentachlorophenol in spiked food packaging samples with recoveries in the range 92.0 to 107.0%. Graphical abstract Schematic representation of the synthesis of hollow ZIFs-derived hollow carbon material. Free protons derived from tannic acid penetrated into ZIF-8 to destroy its solid framework and the outer parts covered by tannic acid were protected from further etching. After pyrolysis, the morphology of HZC remained similar to that of HZIF-8. Abbreviation: CTAB: hexadecyl trimethyl ammonium bromide; Melm: 2-methylimidazole; ZIF-8: zeolitic imidazolate framework-8; TA: tannic acid; HZIF-8: hollow zeolitic imidazolate framework-8; HZC: hollow zeolitic imidazolate frameworks (ZIFs)-derived mesoporous carbon material.

Efficiency improvement in non-enzymatic H2O2 detection induced by the simultaneous synthesis of Au and Ag nanoparticles in an RGO/Au/Fe3O4/Ag nanocomposite

Developing a quick and precise technique for hydrogen peroxide (H₂O₂) detection would open up a new class of technologies for biological, medical and chemical applications.

Ni-Fe PBA hollow nanocubes as efficient electrode materials for highly sensitive detection of guanine and hydrogen peroxide in human whole saliva

A sensor for the determination of guanine (G) and hydrogen peroxide (H₂O₂) is developed based on Ni-Fe Prussian blue analogues hollow nanocubes (Ni-Fe PBA HNCs) for the first time. As a remarkable redox probe towards G and H₂O₂ oxidation, Ni-Fe PBA HNCs exhibit a series of predominant sensing performances as follows: lower limit of detection, broader linear range and higher selectivity due to the homogeneous hollow structure, high specific surface and the enhanced electron transfer ability of Ni-Fe PBA HNCs. As a G sensor, it exhibits a wide linear range (0.05-4.0 mM) and a low detection limit of 0.0104 μM (S/N = 3). As a H₂O₂ sensor, the Ni-Fe PBA HNCs show superior sensing performances with a low detection limit of 0.291 μM (S/N = 3) and a wide detection range of 0.1-20 mM. By cause of these advantages, the real-time detection of G and H₂O₂ in human saliva are triumphantly accomplishment, indicating the applicability of Ni-Fe PBA HNCs.

Facile synthesis of a zeolitic imidazolate framework-8 with reduced graphene oxide hybrid material as an efficient electrocatalyst for nonenzymatic H2O2 sensing

A zeolitic imidazolate framework-8 (ZIF-8)/reduced graphene oxide (rGO) nanocomposite was formed by using an efficient synthetic method. The morphology and structure of the ZIF-8/rGO nanocomposite were characterized by scanning electron spectroscopy (SEM), X-ray diffraction (XRD) and thermogravimetric analysis (TGA) mapping. The ZIF-8/rGO nanocomposites were immobilized on a carbon paste electrode (CPE) to construct a high-performance nonenzymatic electrochemical H2O2 sensor. A cyclic voltammetry (CV) study showed that the ZIF-8/rGO nanocomposites displayed better electrocatalytic activity toward H2O2 reduction compared to that of ZIF-8. An amperometric study indicated that the H2O2 sensor displayed high performance, which offered a low detection limit (0.05 μM) (S/N = 3), a high sensitivity (4.01 μA mM-1 cm-2), and a wide linear range (from 1.0 to 625 μM). An electrochemical reaction mechanism was proposed for H2O2 reduction on the ZIF-8/rGO/CPE. Importantly, the as-fabricated H2O2 sensor exhibited good reproducibility and excellent selectivity. Furthermore, the constructed high-performance sensor was utilized to monitor the H2O2 levels in real samples, and satisfactory results were obtained. These results demonstrated that the ZIF-8/rGO nanocomposite can be used as a good electrochemical sensor material in practical applications.

Synthesis, Characterization, and Biomedical Applications of an Alkylated Quercetin-Gadolinium Complex

Flavonoids and their derivatives have been extensively studied for their pharmaceutical applications due to their antioxidant and anti-inflammatory properties. The coordination complexes of several flavonoids have demonstrated DNA binding ability that can confer anticancer properties. The structure of the flavonoid has a pronounced influence on its pharmacological properties. Herein we report the synthesis and characterization of alkylated quercetin and its complex with gadolinium. The structure of the complex was confirmed using spectroscopic techniques. The ability of the gadolinium-alkylated quercetin complex to serve as a magnetic contrast agent was compared with gadolinium-quercetin complex. The quercetin-gadolinium complex was found to exhibit better contrast property with a relaxivity of 0.2952 μg mL^-1 s^-1 when compared to the gadolinium complex of alkylated quercetin. This difference primarily arises due to the greater hydrophobicity of the alkylated quercetin complex that restricts access of water. However, the alkylated quercetin was found to exhibit better enzyme mimic activity as the metal ion served as a redox center that enabled quantification of hydrogen peroxide in the concentration range 50-450 μM within 5 s with a sensitivity of 64 nA/μM and limit of detection of 7.3 μM. The better sensing performance of the alkylated quercetin-gadolinium complex, reported here for the first time, when compared to quercetin-gadolinium complex can be attributed to the enhanced electroactive area on the working electrode.