Study on effects of applied current and voltage on the ageing of supercapacitors

Ag(e)ing and Degradation of Supercapacitors: Causes, Mechanisms, Models and Countermeasures

The most prominent and highly visible advantage attributed to supercapacitors of any type and application, beyond their most notable feature of high current capability, is their high stability in terms of lifetime, number of possible charge/discharge cycles or other stability-related properties. Unfortunately, actual devices show more or less pronounced deterioration of performance parameters during time and use. Causes for this in the material and component levels, as well as on the device level, have only been addressed and discussed infrequently in published reports. The present review attempts a complete coverage on these levels; it adds in modelling approaches and provides suggestions for slowing down ag(e)ing and degradation.

Advances in high-voltage supercapacitors for energy storage systems: materials and electrolyte tailoring to implementation

To achieve a zero-carbon-emission society, it is essential to increase the use of clean and renewable energy. Yet, renewable energy resources present constraints in terms of geographical locations and limited time intervals for energy generation. Therefore, there is a surging demand for developing high-performance energy storage systems (ESSs) to effectively store the energy during the peak time and use the energy during the trough period. To this end, supercapacitors hold great promise as short-term ESSs for rapid power recovery or frequency regulation to improve the quality and reliability of power supply. In particular, the electrical double layer capacitor (EDLC) which offers long and stable cycle retention, high power densities, and fast charge/discharge characteristics with a moderate operating voltage window, is a suitable candidate. Yet, for implementation of the EDLC in ESSs, further research effort is required in terms of increasing the operating voltage and energy densities while maintaining the long-term cycle stability and power densities which are desirable aspects for ESS operation. Here, we examine the advances in EDLC research to achieve a high operating voltage window along with high energy densities, covering from materials and electrolytes to long-term device perspectives for next-generation supercapacitor-based ESSs.

Degeneration of Key Structural Components Resulting in Ageing of Supercapacitors and the Related Chemical Ageing Mechanism

The research on supercapacitors (SCs) is one of the hot topics in the field of energy storage, and the intrinsic ageing mechanism of SCs is significant from both the economic and the scientific point of view. In this paper, the negative effects of decay of the key structural components on ageing of SCs were investigated by factorial design and analysis of variance (ANOVA). The ANOVA results showed that the degree of the negative influence on ageing of SCs could be ranked in descending order as anode > separator > cathode. The ageing would be accelerated due to the interaction between the electrode and separator, especially at a high charge-discharge current density. Further, the intrinsic chemical ageing mechanism of SCs was revealed by the morphology, microstructure, and chemical composition analyses of the fresh and aged key components (the electrode carbon materials, current collectors, and separators) with scanning electron microscopy (SEM), Brunauer-Emmett-Teller (BET), X-ray photoelectron spectra (XPS), time-of-flight secondary ion mass spectrometry (TOF-SIMS), wide-angle X-ray diffraction (WAXD), differential scanning calorimetry (DSC), Fourier transform infrared (FTIR), etc. Moreover, the minimum pore width of electrode carbon materials suitable for electrolyte ion diffusion was obtained by density functional theory (DFT) calculations, which corroborated the assumption that the pore structure deterioration was one of the direct causes of capacitance loss for aged SCs. Generally, the ageing mechanism of key components of SCs could be a reference to develop advanced electrode materials and separators for SCs.

High-Temperature Degradation Tests on Electric Double-Layer Capacitors: The Effect of Residual Voltage on Degradation

The demand for electric double-layer capacitors, which have high capacity and are maintenance-free, for use in a variety of devices has increased. Nevertheless, it is important to know the degradation behavior of these capacitors at high temperatures because they are expected to be used in severe environments. Therefore, degradation tests at 25 °C and 80 °C were carried out in the current study to analyze the degradation behavior. Steam-activated carbon, Ketjen black, and PTFE were used as the electrodes, conductive material, and binder, respectively, and KOH was used as the electrolyte. The impedance and capacitance were calculated from the voltage and current in the device using the alternating current (AC) impedance method. The results showed that the impedance increased and the capacitance decreased over 14 days at 80 °C, which is the inverse of what we observed at 25 °C. Rapid degradation was also confirmed from the 80 °C degradation test. The residual voltage after measuring the current and voltage was a prominent factor influencing this rapid degradation.

Modeling of Equivalent Circuit Analysis of Degraded Electric Double-Layer Capacitors

The demand for electric double-layer capacitors (EDLCs) has recently increased, especially for regenerative braking systems in electric or hybrid vehicles. However, using EDLCs under high temperature often enhances their degradation. Continuously monitoring EDLC degradation is important to prevent sudden malfunction and rapid drops in efficiency. Therefore, it is useful to diagnose the degradation at a lower frequency than that used in charge/discharge. Unused and degraded EDLCs were analyzed using the alternating current impedance method for measurements over a wide frequency range. Each result had a different spectrum up to 1 kHz. In addition, we show the basic inside condition of EDLCs with equivalent circuit analysis. This paper explores the possibility of degradation diagnosis at a high frequency and the basic physical mechanism.