Cathodically activated Au/TiO2 nanocomposite synthesized by a new facile solvothermal method: An efficient electrocatalyst with Pt-like activity for hydrogen generation

Green synthesis of CuO nanoparticles using Hibiscus sabdariffa L. extract to treat wastewater in Soba Sewage Treatment Plant, Sudan

Looking for a cost-effective and ecofriendly method for wastewater treatment is a global challenge. Therefore, this study investigated the removal of wastewater pollutants using copper oxide nanoparticles (CuONPs). CuONPs synthesized by a green solution combustion synthesis (SCS) and characterized by ultraviolet-visible spectroscopy (UV-Vis), Fourier transform infrared (FT-IR), powder X-ray diffraction analysis (PXRD), and scanning electron microscopy (SEM) techniques. PXRD showed nanoparticle sizes ranging from 10 to 20 polycrystalline patterns indexed with two peaks corresponding to (111) and (113) reflections of the face-centered cubic CuO crystal. The energy-dispersive spectroscopy analysis obtained in conjunction with SEM analysis proved the presence of Cu and O atoms at 86.3 and 13.6%, respectively, confirming the reduction and capping of Cu with Hibiscus sabdariffa extract's phytochemicals. The CuONPs proved to be a promising decontaminant for wastewater found to reduce biochemical oxygen demand (BOD) and chemical oxygen demand (COD) by 56%, and very efficient in reducing both the total dissolved matter (TDS) and conductivity (σ) by 99%. The CuONPs removed simultaneously chromium, copper, and chloride with respective percentages of 26, 78.8, and 78.2%. Green synthesis of nanoparticles is a simple, rapid, cost-effective, and ecofriendly method that successfully removed contaminants from wastewater.

Microwave Synthesis of Pt Clusters on Black TiO2 with Abundant Oxygen Vacancies for Efficient Acidic Electrocatalytic Hydrogen Evolution

Oxygen vacancies-enriched black TiO₂ is one promising support for enhancing hydrogen evolution reaction (HER). Herein, oxygen vacancies enriched black TiO₂ supported sub-nanometer Pt clusters (Pt/TiO₂ -O_V ) with metal support interactions is designed through solvent-free microwave and following low-temperature electroless approach for the first time. High-temperature and strong reductants are not required and then can avoid the aggregation of decorated Pt species. Experimental and theoretical calculation verify that the created oxygen vacancies and Pt clusters exhibit synergistic effects for optimizing the reaction kinetics. Based on it, Pt/TiO₂ -O_V presents remarkable electrocatalytic performance with 18 mV to achieve 10 mA cm^-2 coupled with small Tafel slope of 12 mV dec^-1 . This work provides quick synthetic strategy for preparing black titanium dioxide based nanomaterials.

Deciphering the Molecular Mechanism of Substrate-Induced Assembly of Gold Nanocube Arrays toward an Accelerated Electrocatalytic Effect Employing Heterogeneous Diffusion Field Confinement

The complex electrocatalytic performance of gold nanocubes (AuNCs) is the focus of this work. The faceted shapes of AuNCs and the individual assembly processes at the electrode surfaces define the heterogeneous conditions for the purpose of electrocatalytic processes. Topographic and electron imaging demonstrated slightly rounded AuNC (average of 38 nm) assemblies with sizes of ≤1 μm, where the dominating patterns are (111) and (200) crystallographic planes. The AuNCs significantly impact the electrochemical performance of the investigated electrode [indium-tin oxide (ITO), glassy carbon (GC), and bulk gold] systems driven by surface electrons promoting the catalytic effect. Cyclic voltammetry in combination with scanning electrochemical microscopy allowed us to decipher the molecular mechanism of substrate-induced electrostatic assembly of gold nanocube arrays, revealing that the accelerated electrocatalytic effect should be attributed to the confinement of the heterogeneous diffusion fields with tremendous electrochemically active surface area variations. AuNC drop-casting at ITO, GC, and Au led to various mechanisms of heterogeneous charge transfer; only in the case of GC did the decoration significantly increase the electrochemically active surface area (EASA) and ferrocyanide redox kinetics. For ITO and Au substrates, AuNC drop-casting decreases system dimensionality rather than increasing the EASA, where Au-Au self-diffusion was also observed. Interactions of the gold, ITO, and GC surfaces with themselves and with surfactant CTAB and ferrocyanide molecules were investigated using density functional theory.

Cathodic Activation of Titania-Fly Ash Cenospheres for Efficient Electrochemical Hydrogen Production: A Proposed Solution to Treat Fly Ash Waste

Fly ash (FA) is a waste product generated in huge amounts by coal-fired electric and steam-generating plants. As a result, the use of FA alone or in conjunction with other materials is an intriguing study topic worth exploring. Herein, we used FA waste in conjunction with titanium oxide (TiO2) to create (FA-TiO2) nanocomposites. For the first time, a cathodic polarization pre-treatment regime was applied to such nanocomposites to efficiently produce hydrogen from an alkaline solution. The FA-TiO2 hybrid nanocomposites were prepared by a straightforward solvothermal approach in which the FA raw material was mixed with titanium precursor in dimethyl sulfoxide (DMSO) and refluxed during a given time. The obtained FA-TiO2 hybrid nanocomposites were fully characterized using various tools and displayed a cenosphere-like shape. The synthesized materials were tested as electrocatalysts for the hydrogen evolution reaction (HER) in 0.1 M KOH solution in the dark, employing various electrochemical techniques. The as-prepared (unactivated) FA-TiO2 exhibited a considerable HER electrocatalytic activity, with an onset potential (EHER) value of −144 mV vs. RHE, a Tafel slope (−bc) value of 124 mV dec−1 and an exchange current density (jo) of ~0.07 mA cm−2. The FA-TiO2′s HER catalytic performance was significantly enhanced upon cathodic activation (24 h of chronoamperometry measurements performed at a high cathodic potential of −1.0 V vs. RHE). The cathodically activated FA-TiO2 recorded HER electrochemical kinetic parameters of EHER = −28 mV, −bc = 115 mV dec−1, jo = 0.65 mA cm−2, and an overpotential η10 = 125 mV to yield a current density of 10 mA cm−2. Such parameters were comparable to those measured here for the commercial Pt/C under the same experimental conditions (EHER = −10 mV, −bc = 113 mV dec−1, jo = 0.88 mA cm−2, η10 = 110 mV), as well as to the most active electrocatalysts for H2 generation from aqueous alkaline electrolytes.

Recent Advances in Plasmonic Photocatalysis Based on TiO2 and Noble Metal Nanoparticles for Energy Conversion, Environmental Remediation, and Organic Synthesis

Plasmonic photocatalysis has emerged as a prominent and growing field. It enables the efficient use of sunlight as an abundant and renewable energy source to drive a myriad of chemical reactions. For instance, plasmonic photocatalysis in materials comprising TiO₂ and plasmonic nanoparticles (NPs) enables effective charge carrier separation and the tuning of optical response to longer wavelength regions (visible and near infrared). In fact, TiO₂ -based materials and plasmonic effects are at the forefront of heterogeneous photocatalysis, having applications in energy conversion, production of liquid fuels, wastewater treatment, nitrogen fixation, and organic synthesis. This review aims to comprehensively summarize the fundamentals and to provide the guidelines for future work in the field of TiO₂ -based plasmonic photocatalysis comprising the above-mentioned applications. The concepts and state-of-the-art description of important parameters including the formation of Schottky junctions, hot electron generation and transfer, near field electromagnetic enhancement, plasmon resonance energy transfer, scattering, and photothermal heating effects have been covered in this review. Synthetic approaches and the effect of various physicochemical parameters in plasmon-mediated TiO₂ -based materials on performances are discussed. It is envisioned that this review may inspire and provide insights into the rational development of the next generation of TiO₂ -based plasmonic photocatalysts with target performances and enhanced selectivities.

The exploitation of rice husk biomass for the bio-inspired synthesis of gold nanoparticles as a multifunctional material for various biological and photocatalytic applications

We report an efficient and facile approach to biosynthesis of gold nanoparticles (AuNPs) using the extract of an agro-waste rice husk generated from rice production. The biosynthesized NPs produced were characterized by UV-Visible absorption, TEM, XRD, EDX, and FTIR methods. The impact of temperature and pH on the stability of the synthesized AuNPs was also studied. The TEM imaging revealed the formation of monodispersed spherical NPs with an average size of ~ 15 nm. The absorption spectrum of AuNPs demonstrated the formation of Surface Plasmon Resonance (SPR) peak at 530 nm. The XRD pattern suggested the formation of face-centered cubic (FCC) lattice structure of AuNPs. The FTIR analysis displayed characteristic peaks related to various phytochemicals in the plant extract responsible for reducing and stabilizing NPs. In addition, AuNPs showed thermal stability when subjected to various temperature scales. The AuNPs exhibited an efficiency against the pathogenic bacteria Staphylococcus aureus and pathogenic fungi Candida albicans. The AuNPs 18.5% DPPH free scavenging activity, indicating the antioxidant potential for AuNPs. In addition, the AuNPs showed anticancer activity against the colorectal adenocarcinoma carcinoma cell line. Furthermore, AuNPs displayed significant enhancement in photocatalytic degradation of Methylene Blue and 4-Nitrophenol dyes. The results obtained reveal the possible usage of AuNPs produced using rice husk in several biomedical applications.

Electrocatalysis of gold-based nanoparticles and nanoclusters

Gold (Au)-based nanomaterials, including nanoparticles (NPs) and nanoclusters (NCs), have shown great potential in many electrocatalytic reactions due to their excellent catalytic ability and selectivity. In recent years, Au-based nanostructured materials have been considered as one of the most promising non-platinum (Pt) electrocatalysts. The controlled synthesis of Au-based NPs and NCs and the delicate microstructure adjustment play a vital role in regulating their catalytic activity toward various reactions. This review focuses on the latest progress in the synthesis of efficient Au-based NP and NC electrocatalysts, highlighting the relationship between Au nanostructures and their catalytic activity. This review first discusses the parameters of Au-based nanomaterials that determine their electrocatalytic performance, including composition, particle size and architecture. Subsequently, the latest electrocatalytic applications of Au-based NPs and NCs in various reactions are provided. Finally, some challenges and opportunities are highlighted, which will guide the rational design of Au-based NPs and NCs as promising electrocatalysts.

Ultrasensitive electrochemical determination of the cancer biomarker protein sPD-L1 based on a BMS-8-modified gold electrode

This work describes the modification of a gold electrode with the BMS-8 compound that interacts with the Programmed Death-Ligand 1 (PD-L1), an immune checkpoint protein. The results show that we can confirm the presence of the sPD-L1 in the concentration range of 10^-18 to 10^-8 M using electrochemical impedance spectroscopy (EIS) with a limit of detection (LOD) of 1.87 × 10^-14 M for PD-L1 (S/N = 3.3) and at a concentration of 10^-14 M via cyclic voltammetry (CV). Additionally, high-resolution X-ray photoelectron spectroscopy (XPS), contact angle, and surface free energy measurements were applied to confirm the functionalization of the electrode. We investigated the selectivity of the electrode for other proteins: Programmed Death-1 (PD-1), cluster of differentiation 160 (CD160), and B- and T-lymphocyte attenuator (BTLA) at concentrations of 10^-8 M. Differentiation between PD-L1 and PD-1 was achieved based on the analysis of the capacitance effect frequency dispersion at the surface of the modified Au electrode with BMS-8 after incubation at various concentrations of PD-L1 and PD-1 proteins in the range of 10^-18 to 10^-8 M. Significant differences were observed in the heterogeneity of PD-L1 and PD-1. The results of the quasi-capacitance studies demonstrate that BMS-8 strongly and specifically interacts with the PD-L1 protein.

Ultrahigh electrocatalytic activity with trace amounts of platinum loadings on free-standing mesoporous titanium nitride nanotube arrays for hydrogen evolution reactions

Minimizing Pt loadings on electrocatalysts for hydrogen evolution reactions (HERs) is essential for their commercial applications. Herein, free-standing mesoporous titanium nitride nanotube arrays (TiN NTAs) were fabricated to serve as a substrate for Pt loadings in trace amounts. TiN NTAs were prepared by thermal treatment of anodic TiO2 NTAs at 750 °C for 3 h in a NH3 atmosphere. The uniform TiN NTAs showed an inner diameter of ∼80 nm and a length of ∼7 μm, with many mesoporous holes ranging from 5 to 10 nm in diameter on the nanotube walls. Pt species dissolved from the Pt counter electrode in electrochemical cycling were redeposited on the mesoporous TiN NTAs to produce Pt-TiN NTAs with an ultra-low Pt loading of 8.3 μg cm-2. Pt-TiN NTAs exhibited 15-fold higher mass activity towards HER than the benchmark 20 wt% Pt/C in acidic media, with an overpotential of 71 mV vs. RHE at a current density of 10 mA cm-2, a Tafel slope value of 46.4 mV dec-1 and excellent stability. The performance of Pt-TiN NTAs is also much better than that of Pt species deposited on non-mesoporous nanotube arrays due to the shortcuts originating from the mesoporous holes on the nanotube walls for electron and mass transfer.

Au-Mediated Charge Transfer Process of Ternary Cu2O/Au/TiO2-NAs Nanoheterostructures for Improved Photoelectrochemical Performance

Based on a facile three-step preparation method, Cu2O/Au/TiO2-NAs ternary heterojunction nanocomposites have been successfully synthesized by electrodepositing a Cu2O layer on the surface of Au nanoparticles (NPs) decorated highly ordered TiO2 nanotube arrays (NAs). The structure, surface morphology, chemical composition, and optical and intrinsic defects properties of the as-prepared samples are characterized by transmission and scanning electron microscopy (TEM and SEM), X-ray diffraction (XRD), UV-vis light absorbance spectra, Raman scattering, and X-ray photoelectron spectroscopy (XPS). Simultaneously, the Cu2O/Au/TiO2-NAs ternary nanohybrids exhibited progressively improved photoelectrocatalytic (PEC) performance compared with the dual Cu2O/TiO2-NAs type-II nanoheterojunctions, confirming by the photocurrent density versus testing time curve (amperometric I-t curve), open-circuit potential versus testing time curve (V oc-t curve), and electrochemical impedance spectroscopy (EIS) measurements, which were mainly ascribed to the synergistic effect of reduced interfacial charge transfer resistance and boosted energetic charge carriers generation associated with embedding Au NPs. Furthermore, the self-consistent charge transfer mechanism of Z-scheme and interband transitions mediated with Au NPs for Cu2O/Au/TiO2-NAs triple nanocomposites is proposed, which was evaluated by nanosecond time-resolved transient photoluminescence (NTRT-PL) spectra excited by 266 and 400 nm, respectively. Following this scheme, UV-vis light photocatalytic activities of Cu2O/Au/TiO2-NAs ternary nanohybrids were elaborated toward photodegradation of methyl orange (MO) in aqueous solution, and the photodegradation rate of optimum triple nanocomplex was found to be 90%.

Activating Titanium Dioxide as a New Efficient Electrocatalyst: From Theory to Experiment

Though transition-metal-based materials have emerged as the most promising alternatives to Pt-based electrocatalysts in hydrogen evolution reaction (HER), only a few of them (Fe-, Co-, Ni-, W-, and Mo-based materials) are used as efficient HER electrocatalysts, while others are generally considered as HER-inactive materials with poor activities. Here, a theory-guided experiment is carried out to activate titanium dioxide as a new efficient HER electrocatalyst. First-principles simulations indicate that the hydrogen adsorption free energy could be optimized through tuning the structural and electronic properties of TiO₂. Then Cu-doped amorphous TiO₂ is successfully prepared based on the theoretical results. The activated TiO₂ expectedly shows excellent HER performance with a low overpotential of 92 mV at 10 mA cm^-2 in alkaline media, which is far superior to that of the crystalline TiO₂ (over 400 mV). The origin of HER activity is further investigated in detail. The corrugation of the amorphous surface helps stabilize the adsorbed water molecule, crucial for the water dissociation of the Volmer step. The Cu doping can strengthen the orbital hybridization of H1s and O2p favoring the hydrogen adsorption/desorption and improve the electrical conductivity. Our work highlights the great potential of traditionally inactive materials in HER electrocatalysis and helps deepen our understanding of the catalytic mechanism.

Metal nanoparticles fabricated by green chemistry using natural extracts: biosynthesis, mechanisms, and applications

Nanoparticles (NPs) are new inspiring clinical targets that have emerged from persistent efforts with unique properties and diverse applications. However, the main methods currently utilized in their production are not environmentally friendly. With the aim of promoting a green approach for the synthesis of NPs, this review describes eco-friendly methods for the preparation of biogenic NPs and the known mechanisms for their biosynthesis. Natural plant extracts contain many different secondary metabolites and biomolecules, including flavonoids, alkaloids, terpenoids, phenolic compounds and enzymes. Secondary metabolites can enable the reduction of metal ions to NPs in eco-friendly one-step synthetic processes. Moreover, the green synthesis of NPs using plant extracts often obviates the need for stabilizing and capping agents and yields biologically active shape- and size-dependent products. Herein, we review the formation of metallic NPs induced by natural extracts and list the plant extracts used in the synthesis of NPs. In addition, the use of bacterial and fungal extracts in the synthesis of NPs is highlighted, and the parameters that influence the rate of particle production, size, and morphology are discussed. Finally, the importance and uniqueness of NP-based products are illustrated, and their commercial applications in various fields are briefly featured.