Tunable nanocotton-like amorphous ternary Ni-Co-B: A highly efficient catalyst for enhanced oxygen evolution reaction

Energy-Efficient Co-production of Benzoquinone and H2 Using Waste Phenol in a Hybrid Alkali/Acid Flow Cell

In both the manufacturing and chemical industries, benzoquinone is a crucial chemical product. A perfect and economical method for making benzoquinone is the electrochemical oxidation of phenol, thanks to the traditional thermal catalytic oxidation of phenol process requires high cost, serious pollution and harsh reaction conditions. Here, a unique heterostructure electrocatalyst on nickel foam (NF) consisting of nickel sulfide and nickel oxide (Ni9S8-Ni15O16/NF) was produced, and this catalyst exhibited a low overpotential (1.35 V vs. RHE) and prominent selectivity (99 %) for electrochemical phenol oxidation reaction (EOP). Ni9S8-Ni15O16/NF is beneficial for lowering the reaction energy barrier and boosting reactivity in the EOP process according to density functional theory (DFT) calculations. Additionally, an alkali/acid hybrid flow cell was successfully established by connecting Ni9S8-Ni15O16/NF and commercial RuIr/Ti in series to catalyze phenol oxidation in an alkaline medium and hydrogen evolution in an acid medium, respectively. A cell voltage of only 0.60 V was applied to produce a current density of 10 mA cm-2. Meanwhile, the system continued to operate at 0.90 V for 12 days, showing remarkable long-term stability. The unique configuration of the acid-base hybrid flow cell electrolyzer provides valuable guidance for the efficient and environmentally friendly electrooxidation of phenol to benzoquinone.

Superhydrophilicity boron-doped cobalt phosphide nanosheets decorated carbon nanotube arrays self-supported electrode for overall water splitting

Transition metal borides (TMBs) or phosphides (TMPs) have attracted great attention to the design of bifunctional electrocatalysts for energy storage. The superaerophobicity and superhydrophilicity of the catalytic electrode surface are crucial factors to determine the reaction process of the gas electrode. Herein, we report a self-supported electrode of carbon nanotube (CNTs) array grown on carbon cloth (CC) modulated together by boron-doped cobalt phosphide (CoP-B/CNTs/CC). The electrode requires the overpotential of 73.8 mV and 189.5 mV at the current density of ±10 mA cm-2 for hydrogen and oxygen evolution reactions in an alkaline electrolyte (1.0 M KOH), respectively, meanwhile maintaining outstanding long-term durability for more than 300 h. The excellent activity of CoP-B/CNTs/CC is attributed to boron doping regulating its electronic structure and further enriching active sites. The attractive stability of CoP-B/CNTs/CC is due to the unique geometric structure of the self-supported electrode. Furthermore, the superaerophobicity and superhydrophilicity of the electrode surface also accelerate the reaction process of the gas electrode. Expectedly, water splitting cells assembled using CoP-B/CNTs/CC electrodes as cathode and anode, respectively, require a cell voltage of 1.54 V at 10 mA cm-2, which is lower than that of the Pt/C/CC||RuO2/CC couple (1.69 V at 10 mA cm-2). Importantly, CoP-B/CNTs/CC||CoP-B/CNTs/CC achieve stable cell voltage under the step current changes (10 mA cm-2, 50 mA cm-2, and 100 mA cm-2) over 300 h. This work highlights a new path to understanding the effects of the static and dynamic behavior of bubbles on the surface of self-supporting electrodes on catalytic performance.

A Review of Transition Metal Boride, Carbide, Pnictide, and Chalcogenide Water Oxidation Electrocatalysts

Transition metal borides, carbides, pnictides, and chalcogenides (X-ides) have emerged as a class of materials for the oxygen evolution reaction (OER). Because of their high earth abundance, electrical conductivity, and OER performance, these electrocatalysts have the potential to enable the practical application of green energy conversion and storage. Under OER potentials, X-ide electrocatalysts demonstrate various degrees of oxidation resistance due to their differences in chemical composition, crystal structure, and morphology. Depending on their resistance to oxidation, these catalysts will fall into one of three post-OER electrocatalyst categories: fully oxidized oxide/(oxy)hydroxide material, partially oxidized core@shell structure, and unoxidized material. In the past ten years (from 2013 to 2022), over 890 peer-reviewed research papers have focused on X-ide OER electrocatalysts. Previous review papers have provided limited conclusions and have omitted the significance of "catalytically active sites/species/phases" in X-ide OER electrocatalysts. In this review, a comprehensive summary of (i) experimental parameters (e.g., substrates, electrocatalyst loading amounts, geometric overpotentials, Tafel slopes, etc.) and (ii) electrochemical stability tests and post-analyses in X-ide OER electrocatalyst publications from 2013 to 2022 is provided. Both mono and polyanion X-ides are discussed and classified with respect to their material transformation during the OER. Special analytical techniques employed to study X-ide reconstruction are also evaluated. Additionally, future challenges and questions yet to be answered are provided in each section. This review aims to provide researchers with a toolkit to approach X-ide OER electrocatalyst research and to showcase necessary avenues for future investigation.

Nickel Boride/Boron Carbide Particles Embedded in Boron-Doped Phenolic Resin-Derived Carbon Coating on Nickel Foam for Oxygen Evolution Catalysis in Water and Seawater Splitting

Electrolysis of seawater can be a promising technology, but chloride ions in seawater can lead to adverse side reactions and the corrosion of electrodes. A new transition metal boride-based self-supported electrocatalyst was prepared for efficient seawater electrolysis by directly soaking nickel foam (NF) in a mixture of phenolic resin (PR) and boron carbide (B₄ C), followed by an 800 °C annealing. During PR carbonization process, the reaction of B₄ C and NF generated nickel boride (Ni_x B) with high catalytic activity, while PR-derived carbon coating was doped with boron atoms from B₄ C (B-C_PR ). The B-C_PR coating fixed Ni_x B/B₄ C particles in the frames and holes to improve the space utilization of NF. Meanwhile, the B-C_PR coating effectively protected the catalyst from the corrosion by seawater and facilitates the transport of electrons. The optimal Ni_x B/B₄ C/B-C_PR /NF required 1.50 and 1.58 V to deliver 100 and 500 mA cm^-2 , respectively, in alkaline natural seawater for the oxygen evolution reaction.

Amorphous materials for elementary-gas-involved electrocatalysis: an overview

Given the critical demands on energy conversion, storage, and transportation, tremendous interest has been devoted to the field of material development related to energy harvesting, recently. As the only route towards energy utilization, the carriers with the characteristics of low carbon are regarded as the future choice, e.g., hydrogen and ammonia. To this end, electrocatalysis provides a green way to access these substances. However, the unfulfilled conversion efficiency is the bottleneck for practical application. In this review, the promising characteristics of amorphous materials and the amorphous-induced electrocatalytic enhancement (AIEE) were emphasized. In the beginning, the characteristics of amorphous materials are briefly summarized. The basic mechanism of heterogeneous electrocatalytic reactions is illustrated, including the hydrogen/oxygen evolution and oxygen/nitrogen reduction. In the third part, the electrocatalytic performance of amorphous materials is discussed in detail, and the mechanism of AIEE is highlighted. In the last section of this review, the challenges and outlook for the development of amorphous enhanced electrocatalysis are presented.

Impact of Iron in Three-Dimensional Co-MOF for Electrocatalytic Water Oxidation

The integration of iron (Fe) into a cobalt metal-organic framework (Co-MOF) tunes the electronic structure of the parent MOF as well as enhances their electrocatalytic characteristics. By using pyrazine and hydrofluoric acid, we have synthesized three-dimensional Co-MOF [CoFC₄H₄N₂(SO₄)_0.5], (1), and Fe-MOF [FeFC₄H₄N₂(SO₄)_0.5], (2), through a single-step solvothermal method. Further, a series of bimetallic (having both Co and Fe metal centers) MOFs [Co_1-xFe_xFC₄H₄N₂(SO₄)_0.5] were synthesized with variable concentrations of Fe, and their electrocatalytic performances were analyzed. The optimized amount of Fe significantly impacted the electrocatalytic behavior of the bimetallic MOF toward water oxidation. Particularly, the Co_0.75Fe_0.25-MOF needs only 239 and 257 mV of overpotential to deliver 10 and 50 mA/cm² current density, respectively, in alkaline electrolytic conditions. The Co_0.75Fe_0.25-MOF shows a lower Tafel slope (42 mV/dec.) among other bimetallic MOFs and even the commercial RuO₂, and it has excellent durability (with ∼8 mV increases in overpotential after 18 h of electrolysis) and 97.05% Faradaic efficiency, which further evident its catalytic excellency. These findings explore the intrinsic properties of MOF-based electrocatalysts and prospect the suitability for future water electrolysis.

Tuning Ni-MoO2 Catalyst-Ionomer and Electrolyte Interaction for Water Electrolyzers with Anion Exchange Membranes

Tailoring catalyst-ionomer and electrolyte interaction is crucial for the development of anion exchange membrane (AEM) water electrolysis. In this work, the interaction of Ni-MoO2 nanosheets with ionomers and electrolyte cations was investigated. The activity of Ni-MoO2 nanosheets for the hydrogen evolution reaction (HER) increased when tested in 1 M NaOH compared to 1 M KOH; however, it decreased when tested in 0.01 M KOH compared to 1 M KOH electrolyte. The capacitance minimum associated with the potential of zero free charge (pzfc) was shifted negatively from 0.5 to 0.4 V versus RHE when KOH concentration increased from 0.1 mM to 1 M KOH, suggesting a softening of the water in the double-layer to facilitate the OH- transport and faster kinetics of the Volmer step that lead to improved HER activity. The catalyst interaction with cationic moieties in the anion ionomer (or organic electrolytes) can also be rationalized based on the capacitance minimum, because the latter indicates a negatively charged catalyst during the HER, attracting the cationic moieties leading to the blocking of the catalytic sites and lower HER performance. The HER activity of Ni-MoO2 nanosheets is lower in benzyltrimethylammonium hydroxide (BTMAOH) than in tetramethylammonium hydroxide (TMAOH). Anion fumion ionomer and electrolytes with organic cations with benzyl group adsorption (such as BTMAOH) lead to decreased HER activity in comparison with TMAOH and Nafion. By utilizing Ni-MoO2 nanosheet electrodes as a cathode in a full non-platinum group metal (PGM) AEM electrolyzer, a current density of 1.15 A/cm2 at 2 V cell voltage in 1 M KOH at 50 °C was achieved. The electrolyzer showed exceptional stability in 0.1 M KOH for 65 h at 0.5 A/cm2.

Synergism of 1D/2D boride/MXene nanosheet heterojunctions for boosted overall water splitting

Transition metal boride (TMB) as a new type of catalyst has attracted much attention in recent years.

Facile construction of a flexible and wearable electrode based on the hierarchical structure of RGO-coated cotton fabric with amorphous Co-Ni-B alloy

As an emerging energy storage material, amorphous Co–Ni–B alloy was firstly introduced to construct the flexible supercapacitor electrode. To ensure the high electrochemical property, amorphous Co–Ni–B alloy and RGO sheets were combined to form the three-dimensional hierarchical structure on the surface of the cotton fabric, which was beneficial to enhance the electrochemical property. Notably, the preparation conditions of this amorphous Co–Ni–B/RGO/fabric electrode were facile and mild with room temperature and atmospheric pressure, thus avoiding serious damage to the textile fabric because of high temperature and harsh chemical reactions of most preparation methods. This flexible electrode exhibited an optimum specific capacitance of 313.9 F g⁻¹ at 5 mV s⁻¹ and good cycling stability with specific capacitance retention of 85.0% after 3000 cycles. Such special architecture bestowed this electrode with nice electrochemical property, in addition to great promising application in the supercapacitor field.

Schematic diagram of preparation process of amorphous Co–Ni–B/RGO/cotton fabric flexible electrode.

Nitrogen and high oxygen-containing metal-free porous carbon nanosheets for supercapacitor and oxygen reduction reaction applications

Herein, the synthesis of heteroatom-containing graphene-like carbon nanosheets (HA-GCNs) by chemical activation of waste biomass, namely peanut shells. As characterized by a variety of analytical and spectroscopy techniques, the as-synthesized HA-GCNs material carbonized at 900 °C was found to possess sheet-like porous nanosheet morphology with high surface areas (>800 m2 g−1) and desirable of heteroatom contents such as nitrogen (N; 0.84 atom%), and oxygen (O) as high as 20.25 atom%, which greatly improved the electronic properties of the carbon substrate for prospective applications as metal-free electrodes and electrocatalytic materials. The HA-GCNs were found to exhibit a superior specific capacitance of 148, 145, 125, and 105 F g−1 corresponding to the KOH, NaOH, LiOH, and H2SO4 electrolyte solutions, respectively. Although, the HA-GCNs electrode exhibited extraordinary electrochemical performances and cyclic charge-discharge stabilities. Moreover, these novel HA-GCNs exhibited excellent electrocatalytic activities and cyclic stabilities for oxygen reduction reaction (ORR) with a desirable current density of 1.17 mA cm−2 in O2-saturated 0.1 M KOH solution, surpassing that of noble metal-incorporated activated carbons. The superior electrochemical and electrocatalytic performances observed for the HA-GCNs were attributed to the unique pseudocapacitive behavior of the oxygen surface functional groups as well as their unique textural properties, rendering practical applications as low-cost electrodes for supercapacitors and metal-free electrocatalysts for ORR.

Sulfate-Functionalized Nickel Hydroxide Nanobelts for Sustained Oxygen Evolution

Nickel hydroxide (Ni(OH)₂)-based electrocatalysts are promising for the oxygen evolution reaction (OER) due to their low cost, but their activity and durability still need substantial improvement to meet practical application. Here, we report a sulfate-functionalized Ni(OH)₂ nanobelt (S-Ni(OH)₂) electrocatalyst, which exhibited self-enhanced OER activity due to its self-renewed surface during anodic oxidation. The S-Ni(OH)₂ was in situ grown on the nickel foam (NF) surface in potassium peroxydisulfate solution through one-step hydrothermal treatment. This material outperformed all the existing electrocatalysts in the intensity and duration of the OER activity enhancement. An overpotential drop of 70 mV is shown by the S-Ni(OH)₂/NF electrode during 110 h reaction at a current density of 100 mA cm^-2, and the overpotential remains as low as 358 mV at a current density of 200 mA cm^-2. Such activity enhancement during OER is mainly ascribed to the formation of a highly active NiOOH/Ni(SO₄)_0.3(OH)_1.4 composite on the S-Ni(OH)₂ surface as a result of gradual sulfate release. Given the facile and environmentally benign fabrication process (without external addition of a Ni source and surfactant) and good electrochemical properties (high activity and long lifetime), the S-Ni(OH)₂ holds great potential for practical OER application. The surface self-renewal strategy developed here might also be expanded to other electrocatalysts and electrochemical processes.

An efficient bifunctional electrocatalyst derived from layer-by-layer self-assembly of a three-dimensional porous Co-N-C@graphene

Three-dimensional (3D) porous carbon-based materials with tunable composition and microstructure are of great interest for the development of oxygen involved electrocatalytic reactions. Here, we report the synthesis of 3D porous carbon-based electrocatalyst by self-assembling Co-metal organic frameworks (MOF) building blocks on graphene via a layer-by-layer technique. Precise control of the structure and morphology is achieved by varying the MOF layer to tune the electrocatalytic properties. The as-produced electrocatalyst exhibits an excellent catalytic activity for the oxygen reduction reaction in 0.1 mol L^-1 KOH, showing a high onset potential of 0.963 V vs. reversible hydrogen electrode (RHE) and a low tafel slope of 54 mV dec^-1, compared to Pt/C (0.934 V and 52 mV dec^-1, respectively). Additionally, it shows a slightly lower potential vs. RHE (1.72 V) than RuO₂ (1.75 V) at 10 mA cm^-2 in an alkaline electrolyte. A rechargeable Zn-air battery based on the as-produced 3D porous catalyst demonstrates a high peak power density of 119 mW cm^-2 at a cell voltage of 0.578 V while retaining an excellent stability over 250 charge-discharge cycles.