Bioelectrical power generation coupled with high-strength nitrogen removal using a photo-bioelectrochemical fuel cell under oxytetracycline stress

A review on the alternatives to antibiotics and the treatment of antibiotic pollution: Current development and future prospects

Antibiotics, widely used in the fields of medicine, animal husbandry, aquaculture, and agriculture, pose a serious threat to the ecological environment and human health. To prevent antibiotic pollution, efforts have been made in recent years to explore alternative options for antibiotics in animal feed, but the effectiveness of these alternatives in replacing antibiotics is not thoroughly understood due to the variation from case to case. Furthermore, a systematic summary of the specific applications and limitations of antibiotic removal techniques in the environment is crucial for developing effective strategies to address antibiotic contamination. This comprehensive review summarized the current development and potential issues on different types of antibiotic substitutes, such as enzyme preparations, probiotics, and plant extracts. Meanwhile, the existing technologies for antibiotic residue removal were discussed under the scope of application and limitation. The present work aims to highlight the strategy of controlling antibiotics from the source and provide valuable insights for green and efficient antibiotic treatment.

A zero energy-input nitrogen removal reactor based on a short-circuited microfluidic fuel cell

Excessive discharge of ammonia nitrogen would deteriorate water quality. In this work, we designed an innovative microfluidic electrochemical nitrogen-removal reactor (MENR) based on a short-circuited ammonia-air microfluidic fuel cell (MFC). The MENR utilizes the laminar characteristics of two flows (an anolyte containing nitrogen-rich wastewater and a catholyte of acid electrolyte solution) in a microchannel to establish an efficient reactor system. At anode, ammonia was catalyzed by a NiCu/C modified electrode to N2, while O2 in the air was reduced at cathode. In essence, the MENR reactor is a short-circuited MFC. Maximum discharge currents were achieved accompanied with strong ammonia oxidation reaction. Factors indicating electrolyte flow rate, initial nitrogen concentration, electrolyte concentration, and electrode geometry have various effects on the nitrogen removal performance of the MENR. Results indicate that the MENR showed efficient nitrogen removal properties. This work proposes an energy-saving process by using the MENR to remove nitrogen from ammonia-rich wastewater.

A. Jorand F, Barrière F, Etienne M. Challenges and Applications of Nitrate-Reducing Microbial Biocathodes

Bioelectrochemical systems which employ microbes as electrode catalysts to convert chemical energy into electrical energy (or conversely), have emerged in recent years for water sanitation and energy recovery. Microbial biocathodes, and especially those reducing nitrate are gaining more and more attention. The nitrate-reducing biocathodes can efficiently treat nitrate-polluted wastewater. However, they require specific conditions and they have not yet been applied on a large scale. In this review, the current knowledge on nitrate-reducing biocathodes will be summarized. The fundamentals of microbial biocathodes will be discussed, as well as the progress towards applications for nitrate reduction in the context of water treatment. Nitrate-reducing biocathodes will be compared with other nitrate-removal techniques and the challenges and opportunities of this approach will be identified.

Advanced insights on removal of antibiotics by microalgae-bacteria consortia: A state-of-the-art review and emerging prospects

Antibiotics abuse has triggered a growing environmental problem, posing a major threat to both ecosystem and human health. Unfortunately, there are still several shortcomings to current antibiotics removal technologies. Microalgae-bacteria consortia have been shown to be a promising antibiotics treatment technology owing to advantages of high antibiotics removal efficiency, low operational cost, and carbon emission reduction. This review aims to introduce the removal mechanisms, influencing factors, and future research perspectives for using microalgae-bacteria consortia to remove antibiotics. The interaction mechanisms between microalgae and bacteria are comprehensively revealed, and their exclusive advantages have been summarized in a "Trilogy" strategy, including "reinforced physical contact", "upgraded substance utilization along with antibiotics degradation", and "robust biological regulation". What's more, the relationship between different interaction mechanisms is emphatically analyzed. The important influencing factors, including concentration and classes of antibiotics, environmental conditions, and operational parameters, of antibiotics removal were also assessed. Three innovative treatment systems (microalgae-bacteria fuel cells (MBFCs), microalgae-bacteria membrane photobioreactors (MB-MPBRs), and microalgae-bacteria granular sludge (MBGS)) along with three advanced techniques (metabolic engineering, machine learning, and molecular docking and dynamics) are then introduced. In addition, concrete implementing schemes of the above advanced techniques are also provided. Finally, the current challenges and future research directions in using microalgae-bacteria consortia to remove antibiotics have been summarized. Overall, this review addresses the current state of microalgae-bacteria consortia for antibiotics treatment and provides corresponding recommendations for enhancing antibiotics removal efficiency.

Joint effects of bacterium and biochar in remediation of antibiotic-heavy metal contaminated soil and responses of resistance gene and microbial community

Soils containing both veterinary antibiotics (VAs) and heavy metals necessitate effective remediation approaches, and microbial and molecular levels of the results should be further examined. Here, a novel material combining waste fungus chaff-based biochar (WFCB) and Herbaspirillum huttiense (HHS1) was established to immobilize copper (Cu) and zinc (Zn) and degrade oxytetracycline (OTC) and enrofloxacin (ENR). Results showed that the combined material exhibited high immobilization of Cu (85.5%) and Zn (64.4%) and great removals of OTC (41.9%) and ENR (40.7%). Resistance genes including tet(PB), tetH, tetR, tetS, tetT, tetM, aacA/aphD, aacC, aadA9, and czcA were reduced. Abundances of potential hosts of antibiotic resistance genes (ARGs) including phylum Proteobacteria and genera Brevundimonas and Rhodanobacter were altered. Total phosphorus and pH were the factors driving the VA degrading microorganisms and potential hosts of ARGs. The combination of WFCB and HHS1 can serve as an important bioresource for immobilizing heavy metals and removing VAs in the contaminated soil.

Enhanced photodegradation of antibiotics based on anoxygenic photosynthetic bacteria and bacterial metabolites: A sustainably green strategy for the removal of high-risk organics from secondary effluent

Antibiotic residues in effluents discharged from wastewater treatment plants (WWTPs) have been considered high-risk organics due to biorefractory property and potential toxicity. Secondary pollution and unsustainability existed in advanced treatment of secondary effluent are currently in urgent need of improvement. In this study, a sustainably green strategy based on Rhodopseudomonas palustris (R.palustris) by regulating the structure of extracellular polymeric substances (EPS) was proposed for the first time to achieve efficiently removal of sulfadiazine (SDZ). Results showed that 0.2 V was the optimal external potential for R.palustris to efficiently remove SDZ, where the biodegradation rate constant obtained at this potential was 4.87-folds higher than that in open-circuit mode and a complete removal was achieved within 58 h in the presence of EPS extracted at this potential. Three-dimensional excitation-emission matrix (3D-EEM) spectra analysis suggested that tryptophan protein-like, tyrosine protein-like, humic acid-like and fulvic acid-like substances present in EPS were the main effective components which was responsible for the indirect photodegradation of SDZ. The quenching experiments showed that ³EPS* was the dominant reactive species which accounted for 90% of SDZ removal. This study provides new implications for the advanced treatment of secondary effluent organic matters by developing eco-friendly bioaugmentation technology and biomaterials.

A comprehensive review on biodegradation of tetracyclines: Current research progress and prospect

The release of tetracyclines (TCs) in the environment is of significant concern because the residual antibiotics may promote resistance in pathogenic microorganisms, and the transfer of antibiotic resistance genes poses a potential threat to ecosystems. Microbial biodegradation plays an important role in removing TCs in both natural and artificial systems. After long-term acclimation, microorganisms that can tolerate and degrade TCs are retained to achieve efficient removal of TCs under the optimum conditions (e.g. optimal operational parameters and moderate concentrations of TCs). To date, cultivation-based techniques have been used to isolate bacteria or fungi with potential degradation ability. Moreover, the biodegradation mechanism of TCs can be unveiled with the development of chemical analysis (e.g. UPLC-Q-TOF mass spectrometer) and molecular biology techniques (e.g. 16S rRNA gene sequencing, multi-omics sequencing, and whole genome sequencing). In this review, we made an overview of the biodegradation of TCs in different systems, refined functional microbial communities and pure isolates relevant to TCs biodegradation, and summarized the biodegradation products, pathways, and degradation genes of TCs. In addition, ecological risks of TCs biodegradation were considered from the perspectives of metabolic products toxicity and resistance genes. Overall, this article aimed to outline the research progress of TCs biodegradation and propose future research prospects.

The anode is more beneficial to the advanced treatment of wastewater containing antibiotics by three-dimensional electro-biofilm reactor: Degradation, mechanism and optimization

The three-dimensional electrode biological aerated filter (3DE-BAF) has the potential to overcome inherent limitations of conventional electrochemical and biofilm methods. Electrochemical means could enhance the performance and sustainability of biofilm technologies and stimulate the spread of new applications in (waste) water treatment. This paper describes the construction and performance of 3DE-BAF in the treatment of simulated wastewater represented by tetracycline (TC). This is followed by a discussion of electrode performance, the electron transport mechanism and the electrode's effect on the biological community of 3D-EBAF. Given the gap between experimental studies and practical applications, the enlarged anode 3DE-BAF named 3DEAE-BAF reactor was applied with good results to duck farm wastewater. This study could provide guidance as to developing new methods to construct a highly stable 3DE-BAF. The paper concludes that improved 3DE-BAF technology is promising for advanced treatment of livestock wastewater containing antibiotics.

Performance and bacterial community of bio-electrochemical system treating simulated domestic wastewater containing low concentration of cephalosporin antibiotics

This study investigated the effects of five cephalosporin antibiotics (ceftazidime, ceftriaxone, cefdinir, cefixime and cefepime) on performance and bacterial community structure in bio-electrochemical systems (BES) and sequencing batch biofilm reactor (SBBR). The results showed that the external electric field had no significant effect on the removal of COD and ammonia nitrogen in water. The removal rates of five antibiotics in BES increased by 28.5%, 20.0%, 9.1%, 21.0%, and 11.5%, respectively. High-through sequencing showed that microbial membrane-growing process increased species diversity, and antibiotics had a significant inhibitory effect on the initial biofilm of the reactor. As time progressed, the inhibitory effect was weakened, and the microorganism were tolerated and re-enriched. The increase in the type and concentration of antibiotics and the applied electric field had a significant effect on the microorganisms in the reactor. The dominant microorganisms for antibiotic removal in the SBBR were Luteococcus, Cloacibacterium, Dysgonomonas, and Ottowia. The dominant bacteria in the BES were Ottowia and Tahibacte. The abundance of these strains increased significantly during antibiotic acclimation. The abundance of Ottowia, Tahibacter, and Nakamurella were significantly higher than SBBR. Thus the BES system had a good antibiotic degradation effect. The BES can effectively treat simulated domestic sewage containing multiple antibiotics, laying a theoretical foundation for the actual wastewater treatment.

Microbial community dynamic shifts associated with sulfamethoxazole degradation in microbial fuel cells

Though sulfamethoxazole (SMX) degradation at the low or medium concentration (SMX< 30 mg/L) has been reported in the microbial fuel cell (MFC), further exploration is still urgently required to investigate how the high concentration of SMX affect the anode biofilm formation. In this study, the degradation mechanism of SMX and the response of microbial community to SMX at different initial concentrations (0, 0.5, 5 and 50 mg/L) were investigated in MFCs. The highest SMX removal efficiency of 98.4% was obtained in MFC (5 mg/L). SMX at optimal concentration (5 mg/L) could serve as substrate accelerating the extracellular electron transfer. However, high concentration of SMX (50 mg/L) conferred significant inhibition on the electron transfer with SMX removal decline to 84.4%. The 16S rRNA high-throughput sequencing revealed the significant shift of the anode biofilms communities with different initial SMX concentrations were observed in MFCs. Thauera and Geobacter were the predominant genus, with relative abundance of 31.9% in MFC (50 mg/L SMX) and 52.7% in MFC (5 mg/L SMX). Methylophilus exhibited a huge increase with the highest percentage of 16.4% in MFC (50 mg/L). Hence, the functional bacteria of Thauera, Geobacter and Methylophilus endowed significant tolerance to the selection pressure from high concentration of SMX in MFCs. Meanwhile, some bacteria including Ornatilinea, Dechloromonas and Longilinea exhibited a decrease or even disappeared in MFCs. Therefore, initial concentrations of SMX played a fundamental role in modifying the relative abundance of predominant populations. This finding would promote theories support for understanding the evolution of anode biofilm formation related to the different initial concentrations of SMX in MFCs.

Tetracycline inhibition and transformation in microbial fuel cell systems: Performance, transformation intermediates, and microbial community structure

Tetracycline (TC) transformation in the anode of an air cathode microbial fuel cell (MFC) and in the cathode of an MFC-Fenton system was investigated. TC at 10 mg/L in the anolyte was removed by 43-74% in 14-d cycles, mainly attributed to adsorption. The electrochemical activity, COD and acetate consumption of the anodic biofilm were inhibited by TC; inhibition was reversed when TC addition was stopped. Over 84 d of MFC operation with TC, Geobacter and Mycobacterium in the anode biofilm decreased, while Janthinobacterium and Comamonas increased. Over 99% of TC at 10-40 mg/L was removed within 8 h in the MFC-Fenton cathode. O₂^-•/HO₂• and •OH were responsible for the cathodic TC degradation. The maximum current was 0.93 mA (at 250 Ω) and increased by 36.3% by the MFC-Fenton reaction. Cathodic MFC-Fenton is an efficient and energy-saving process for TC removal, compared to slow and problematic anodic TC bio-oxidation.

Toward enhanced performance of integrated photo-bioelectrochemical systems: Taxa and functions in bacteria-algae communities

An integrated photo-bioelectrochemical (IPB) system uses microalgae in the cathode of a microbial fuel cell to achieve higher electricity generation and nutrient removal from wastewater. Using multivariate analysis and surveys of IPB studies, this paper identifies key algal and bacterial taxa and discusses their functions critical for IPB performance. Unicellular algae with high photosynthetic oxygen production and biofilm formation can enhance IPB energy production. Diverse bacterial taxa achieve nitrogen transformations and can improve total nitrogen removal. Understanding bacteria-algae interactions via quorum sensing in the IPB cathode may potentially aid in boosting system performance. Future advances in development of IPBs for wastewater treatment will benefit from interdisciplinary collaboration in analysis of microbial community functions.

Different refractory organic substances degradation and microbial community shift in the single-chamber bio-photoelectrochemical system

The single-chamber bio-photoelectrochemical system (BPES) with a BiOBr photocathode was developed for acid orange 7 (AO7), 2,4 dichlorophenol (2,4-DCP) and chloramphenicol (CAP) degradation under solar irradiation. Photoelectrochemical characterizations showed that the optimized BiOBr-photocathode exhibited great light-response property and excellent electrochemcial performance. Moreover, desired TOC removals were achieved for various organic pollutants, with the values of 90.97% (AO7), 81.41% (2,4-DCP) and 78.47% (CAP). Besides, the lower cathode potentials in the illuminated BPESs were favorable to efficient pollutants degradation. Significant microbial community shifts were observed among the inoculation and anodic biofilms from the BPES, and the most dominated species in anodic biofilms acclimated to various pollutants were Geobacter and Pseudomonas, which have the abilities of extracellular electrons transfer and organics degradation. Some other species that different from the inoculation were also identified from the BPES biofilms. This study suggested that BPES had great potential for refractory organics degradation.

Co3O4 nanoparticles/graphitic carbon nitride heterojunction for photoelectrochemical aptasensor of oxytetracycline

As a broad-spectrum tetracycline antibiotic, the overuse of oxytetracycline (OTC) causes antibiotics residues in the environment and seriously threats to human health owing to effective antibacterial properties. Thus, it is particularly important to design a photoelectrochemical (PEC) aptasensor to detect OTC with excellent performance. Herein, we developed a selective and stable PEC aptasensor of OTC on the basis of Co₃O₄ nanoparticles (Co₃O₄ NPs)/graphitic carbon nitride (g-CN) heterojunction, used as PEC active materials. The Co₃O₄ NPs were successfully grown on the g-CN via grinding and calcining mixture of Co₃O₄ precursors and bulk g-CN. The Co₃O₄/g-CN heterojunction with improved light utilization and promoted electrons/holes separation capability can exhibit higher PEC signal than that of g-CN. In order to implement the purpose of specific recognition, OTC-aptamer was introduced into modified electrode to construct highly selective PEC aptasensor for OTC determination, which can possess wide linear range (0.01-500 nM) with low detection limit (3.5 pM, S/N = 3). This PEC aptasensor platform with excellent selectivity and high stability can provide a practical application in the field of water monitoring.

Enhanced removal of veterinary antibiotic from wastewater by photoelectroactive biofilm of purple anoxygenic phototroph through photosynthetic electron uptake

Purple anoxygenic phototrophs have been recently attracted substantial attention for their growing potential in wastewater treatment and their diverse metabolic patterns can be regulated for process control and optimization. In this study, the photoheterotrophic metabolism of Rhodopseudomonas palustris (R. palustris) was modified by photosynthetic electron uptake using a poised electrode which was explored to enhance removal of veterinary antibiotic from aqueous medium. The results showed that R. palustris grown as biofilm on electrode surface had excellent photoelectroactive activity and the photosynthetic electron uptake from the photoelectroactive biofilm significantly enhanced antibiotic florfenicol (FLO) degradation. The specific degradation rate of FLO at the set electrode potential of 0 V was 2.59-fold higher than that without applied potential. Enhanced co-metabolic reductive dehalogenation by use of the photosynthetic electrons extracted from co-substrate was mainly responsible for FLO degradation which eliminated the antibacterial activity of FLO. The electrode potential controlled the processes of photosynthetic electron uptake and its resultant FLO degradation. The fastest degradation of FLO was achieved at 0 V because the electrode poised at this potential stroke a proper balance between the enhancing photosynthetic electron uptake by serving as electron acceptor and minimizing competition with FLO for the photosynthetic electron from co-substrate. The activity of photoelectroactive biofilm was not negatively affected by FLO at environmental relevant concentration, suggesting its great potential for removal of antibiotic contaminants in wastewater. R. palustris could serve as a reservoir for floR resistance gene but its abundance can be diminished by choosing appropriate electrode potential.

Photocathode optimization and microbial community in the solar-illuminated bio-photoelectrochemical system for nitrofurazone degradation

To further enhance the bio-photoelectrochemical system (BPES) performance for nitrofurazone (NFZ) degradation and current output, the g-C₃N₄/CdS photocathode was optimized, and microbial community shift from inoculation to the BPES was analyzed. Results showed that photocathode with g-C₃N₄/CdS (mass ratio of 1:9) loading of 7.5 mg/cm² exhibited the best performance, with NFZ removal of 83.14% (within 4 h) and current of ~9 mA in the BPES. Proteobacteria accounted for the largest proportion: 66.53% (inoculation), 71.89% (microbial electrolysis cell (MEC) anode), 74.67% (BPES anode) and 57.31% (BPES cathode), respectively. In addition, Geobacter was the most dominant genus in MEC and BPES anode and cathode, which occupied 31.64%, 67.73% and 41.34%, respectively. The microbial compositions of BPES anode and cathode were similar, but different from that of MEC anode. Notably, Rhodopseudomonas, a photosynthetic species, was detected in the BPES. Cognition of microbial community in the BPES is important for advancing its development.

Degradation pathways, microbial community and electricity properties analysis of antibiotic sulfamethoxazole by bio-electro-Fenton system

Sulfamethoxazole (SMX) is a general antibiotic that is frequently identified in wastewater and surface water. In this study, the degradation and metabolic pathway of SMX by bio-electro-Fenton systems equipped with a CNT/r-FeOOH cathode were investigated. When initial SMX = 25 mg/L, the removal efficiency of SMX reached 94.66% by the bio-electro-Fenton system. The concentrations of sul1, sul2, sul3, sulA, intI1 and 16S rRNA genes were examined in effluents. Four out of the six ARGs analysed were detected. Among all quantified sul genes, sul1 and sulA were the most abundant. High-throughput sequencing revealed that the microbial communities and relative abundance at the phylum and genus levels were affected by different SMX concentrations. In addition, the intermediates were detected and the possible SMX degradation pathway by the bio-electro-Fenton process in the present system was proposed. Furthermore, the highest power density obtained was 283.32 ± 16.35 mW/m² (SMX = 25 mg/L). This study provides an efficient and cost effective method for degrading antibiotics.