A strong coupled 2D metal-organic framework and ternary layered double hydroxide hierarchical nanocomposite as an excellent electrocatalyst for the oxygen evolution reaction

Binary Ni-Co-Based Layered Double Hydroxide Nanoneedle Arrays for High Performance of Oxygen Evolution Reaction

Low-cost and high-performance electrocatalysts are crucial for water-splitting reactions. Some non-precious metal electrocatalysts are proved to be good replacements for noble metal due to the unique electronic structure features and excellent performance. In this work, binary Ni-Co-based layered double hydroxide nanoneedle arrays electrocatalysts are synthesized on Ni foam (NF) via a hydrothermal process. The microstructure and the catalytic performance of the catalyst changes significantly by regulating the molar ratio of Ni/Co. The theoretical analysis confirmed that the as-prepared NiCo-LDH nanoneedle arrays reveal a potential behavior in oxygen evolution reaction (OER) at a lower overpotential of 305 mV at 10.0 mA cm^-2 and a Tafel slope of 110.38 mV dec^-1. The double-layer capacitance (C_dl) is 776 mF cm^-2, which indicates that there are many active sites that are exposed on the surface for the electrocatalytic reaction. The results provide an obvious reference value to other types of LDH catalysts for the development of water electrolysis.

2D Metal-Organic Frameworks as Competent Electrocatalysts for Water Splitting

Hydrogen, a clean and flexible energy carrier, can be efficiently produced by electrocatalytic water splitting. To accelerate the sluggish hydrogen evolution reaction and oxygen evolution reaction kinetics in the splitting process, highly active electrocatalysts are essential for lowering the energy barriers, thereby improving the efficiency of overall water splitting. Combining the distinctive advantages of metal-organic frameworks (MOFs) with the physicochemical properties of 2D materials such as large surface area, tunable structure, accessible active sites, and enhanced conductivity, 2D MOFs have attracted intensive attention in the field of electrocatalysis. Different strategies, such as improving the conductivities of MOFs, reducing the thicknesses of MOF nanosheets, and integrating MOFs with conductive particles or substrates, are developed to promote the catalytic performances of pristine MOFs. This review summarizes the recent advances of pristine 2D MOF-based electrocatalysts for water electrolysis. In particular, their intrinsic electrocatalytic properties are detailly analyzed to reveal important roles of inherent MOF active centers, or other in situ generated active phases from MOFs responsible for the catalytic reactions. Finally, the challenges and development prospects of pristine 2D MOFs for the future applications in overall water splitting are discussed.

High-Performance Ternary NiCoMo Electrocatalyst with Three-Dimensional Nanosheets Array Structure

Oxygen evolution reaction is a key process in hydrogen production from water splitting. The development of non-noble metal electrode materials with high efficiency and low cost has become the key factor for large-scale hydrogen production. Binary NiCo-layered double hydroxide (LDH) has been used as a non-noble metal electrocatalyst for OER, but its overpotential is still large. The microstructure of the catalyst is tuned by doping Mo ions into the NiCo-LDH/NF nanowires to form ternary NiCoMo-LDH/NF nanosheet catalysts for the purpose of enhancing the active sites and reducing the initial overpotential. Only 1.5 V (vs. reversible hydrogen electrode (RHE), ≈270 mV overpotential) is required to achieve a catalytic current density of 10 mA cm^-2 and a small Tafel slope of 81.46 mV dec^-1 in 1 M KOH solution, which manifests the best performance of NiCo-based catalysts reported up to now. Electrochemical analysis and micro-morphology show that the high catalytic activity of NiCoMo-LDH/NF is attributable to the change of the microstructure. The interconnected nanosheet arrays have the obvious advantages of electrolyte diffusion and ion migration. Thus, the active sites of catalysts are significantly increased, which facilitates the adsorption and desorption of intermediates. We conclude that NiCoMo-LDH/NF is a promising electrode material for its low cost and excellent electrocatalytic properties.

Iron-doped novel Co-based metal-organic frameworks for preparation of bifunctional catalysts with an amorphous structure for OER/HER in alkaline solution

A novel two-dimensional Co-MOF material {[Co(dptz)₂(oba)₂]·(DMF)₂}_n is prepared using mixed organic ligands, which exhibits both OER (oxygen evolution reaction) and HER (hydrogen evolution reaction) catalytic performance. The integration of an Fe dopant and amorphous interface into Co-MOF to improving the electrocatalytic performance of pristine MOFs (metal-organic frameworks) is demonstrated and the origin of the remarkable electrocatalytic performance of the catalyst is elucidated. The comprehensive characterization data of Fe@Co-MOFs illustrate that there is a crystallinity transition during the doping of Co-MOF, which increases the electron transfer rate of the material and ensures increased exposure of the ligand unsaturated active site on the surface, and modulates the electronic structure of the Co center in a synergistic manner. As a result, the optimized catalytic Fe@Co-MOF-3 with an amorphous structure exhibits outstanding electrocatalytic performance for the OER, with only 248 mV at a current density of 50 mA cm^-2 and excellent stability after 11 h of testing in alkaline solution. Not only that, the HER was achieved with a low overpotential of 150 mV at 10 mA cm^-2. The present work indicates that the as-synthesized Co-MOF and Fe@Co-MOFs offer prospects in developing electrocatalysts for water splitting.

Nanoarchitectured two-dimensional layered double hydroxides-based nanocomposites for biomedical applications

Despite the exceptional physicochemical and morphological characteristics, the pristine layered double hydroxides (LDHs), or two-dimensional (2D) hydrotalcite clays, often suffer from various shortcomings in biomedicine, such as deprived thermal and chemical stabilities, acid-prone degradation, as well as lack of targeting ability, hampering their scale-up and subsequent clinical translation. Accordingly, diverse nanocomposites of LDHs have been fabricated by surface coating of organic species, impregnation of inorganic species, and generation of core-shell architectures, resulting in the complex state-of-the-art architectures. In this article, we initially emphasize various bothering limitations and the chemistry of these pristine LDHs, followed by discussions on the engineering strategies of different LDHs-based nanocomposites. Further, we give a detailed note on diverse LDH nanocomposites and their performance efficacy in various biomedical applications, such as drug delivery, bioimaging, biosensing, tissue engineering and cell patterning, deoxyribonucleic acid (DNA) extraction, as well as photoluminescence, highlighting the influence of various properties of installed supramolecular assemblies on their performance efficacy. In summary, we conclude with interesting perspectives concerning the lessons learned to date and the strategies to be followed to further advance their scale-up processing and applicability in medicine.

Dual-Metal Zeolitic Imidazolate Framework Derived Highly Ordered Hierarchical Nanoarrays on Self-Supported Carbon Fiber for Oxygen Evolution

The construction of highly ordered hierarchical nanoarrays is crucial for obtaining effective transition metal carbon nanomaterial electrocatalysts for oxygen evolution reaction (OER) in water splitting. Herein, we adopted a Co metal zeolitic imidazolate framework (Co-ZIF) as a precursor by ion-exchange/etching reaction with Fe(NO₃)₃ to obtain hierarchical N-doped Co-Fe layered double hydroxide (CoFe-LDH) in situ generated in Co-ZIF nanoarrays based on a self-supported carbon cloth (CC) substrate noted as CoFe-LDH@Co-ZIF@CC. Benefiting from the synergistic effect of these species and their highly ordered self-supported nanoarray structure, the catalytic active sites were fully exposed and highly protected in alkaline electrolyte, which significantly promoted electron transport and improved electrochemical performance. The CoFe-LDH@Co-ZIF@CC exhibited the low overpotentials of about 225 and 319 mV at 10 and 100 mA cm⁻² with a small Tafel slope of 81.8 mV dec⁻¹ recorded in a 1.0 M KOH electrolyte. In addition, it also showed a long-term durability without obvious decay after 30 h. Therefore, its remarkable OER activity demonstrates this material’s promising application in the green hydrogen energy industry.

Two-Dimensional Metal-Organic Framework Nanosheets: Synthesis and Applications in Electrocatalysis and Photocatalysis

Two-dimensional metal-organic nanosheets (2D MONs) are an emerging class of ultrathin, porous, and crystalline materials. The organic/inorganic hybrid nature offers MONs distinct advantages over other inorganic nanosheets in terms of diversity of organic ligands and metal notes. Compared to bulk three-dimensional metal-organic frameworks, 2D MONs possess merits of high density and readily accessible catalytic sites, reduced diffusion pathways for reactants/products, and fast electron transport. These features endow MONs with enhanced physical/chemical properties and are ideal for heterogeneous catalysis. In this Review, state-of-the-art synthetic methods for the fabrication of 2D MONs were summarized. The advances of 2D MONs-based materials for electrocatalysis and photocatalysis, including hydrogen evolution reaction (HER), oxygen evolution reaction (OER), oxygen reduction reaction (ORR), carbon dioxide reduction reaction (CO₂ RR), and electro-/photocatalytic organic transformations were systematically discussed. Finally, the challenges and perspectives regarding future design and synthesis of 2D MONs for high-performance electrocatalysis and photocatalysis were provided.

Synthesis of FeNiCo Ternary Hydroxides through Green Grinding Method with Metal-Organic Frameworks as Precursors for Oxygen Evolution Reaction

Metal-organic framework (MOF)-derived materials have been widely applied to diversified fields until now due to their flexible processibility. Different kinds of suitable materials can be synthesized by varying MOF templates/precursors and synthesis methods. An appropriate method can skillfully fabricate the materials with excellent performance while meeting the environmentally friendly concept. In this work, a green and flexible grinding method was introduced to synthesize MOF-derived FeNiCo trimetallic materials without solvent-assistance, in which Co-ZIF-L was selected as a sacrificial precursor and Fe³⁺ and Ni²⁺ as etchants and dopants. Surprisingly, the as-prepared FeNiCo ternary hydroxides supported on Ni foam (G-FeNi-Co-ZIF-L/NF) showed superior electrocatalytic performance for the oxygen evolution reaction (OER) with a low overpotential of 248 mV at 10 mA cm^-2 . This work provides a prospective approach to synthesize various MOF-derived multi-metallic materials, which also opens the door for syntheses of OER electrocatalysts.

Synthesis of amorphous FeNiCo trimetallic hybrid electrode from ZIF precursors for efficient oxygen evolution reaction

Development of non-noble multi-metallic electrocatalyst with high oxygen evolution reaction (OER) activity via a simple and low-cost method is of great importance for improving the efficiency of water electro-chemical splitting. Herein, a solution impregnation strategy was proposed to synthesize novel FeNi-doped Co-ZIF-L trimetallic hybrid electrocatalyst using Co-ZIF-L as sacrificial templates and Fe and Ni ions as etchants and dopants. This synthetic strategy could be realized via the etching-coprecipitation mechanism to obtain an amorphous hybrid containing multi-metal hydroxides. The as-prepared electrocatalyst loaded on Ni foam displays a low overpotential of 245 mV at 10 mA·cm^-2, a small Tafel slope of 54.9 mV·dec^-1, and excellent stability at least 12 h in the OER process. The facile and efficient synthetic strategy presents a new entry for the fabrication of ZIFs-derived multi-metallic electrocatalysts for OER electrocatalysis.

ZIF-67-based catalysts for oxygen evolution reaction

As a new type of crystalline porous material, the imidazole zeolite framework (ZIF) has attracted widespread attention due to its ultra-high surface area, large pore volume, and unique advantage of easy functionalization. Developing different methods to control the shape and composition of ZIF is very important for its practical application as catalyst. In recent years, nano-ZIF has been considered an electrode material with excellent oxygen evolution reaction (OER) performance, which provides a new way to research electrolyzed water. This review focuses on the morphological engineering of the original ZIF-67 and its derivatives (core-shell, hollow, and array structures) through doping (cation doping, anion doping, and co-doping), derivative composition engineering (metal oxide, phosphide, sulfide, selenide, and telluride), and the corresponding single-atom catalysis. Besides, combined with DFT calculations, it emphasizes the in-depth understanding of actual active sites and provides insights into the internal mechanism of enhancing the OER and proposes the challenges and prospects of ZIF-67 based electrocatalysts. We summarize the application of ZIF-67 and its derivatives in the OER for the first time, which has significantly guided research in this field.

2D metal-organic framework-based materials for electrocatalytic, photocatalytic and thermocatalytic applications

Ultrathin two-dimensional metal-organic frameworks (2D MOFs) have recently attracted extensive interest in various catalytic fields (e.g., electrocatalysis, photocatalysis, thermocatalysis) due to their ultrathin thickness, large surface area, abundant accessible unsaturated active sites and tunable surface properties. Besides tuning the intrinsic properties of pristine 2D MOFs by changing the metal nodes and organic ligands, one of the hot research trends is to develop 2D MOF hybrids and 2D MOF-derived materials with higher stability and conductivity in order to further increase their activity and durability. Here, the synthesis of 2D MOF nanosheets is briefly summarized and discussed. More attention is focused on summaries and discussions about the applications of these 2D MOFs, their hybrids and their derived materials as electrocatalysts, photocatalysts and thermocatalysts. The superior properties and catalytic performance of these 2D MOF-based catalysts compared to their 3D MOF counterparts in electrocatalysis, photocatalysis and thermocatalysis are highlighted. The enhanced activities of 2D MOFs, their hybrids and derivatives come from abundant accessible active sites, a high density of unsaturated metal nodes, ultrathin thickness, and tunable microenvironments around the MOFs. Views regarding current and future challenges in the field, and new advances in science and technology to meet these challenges, are also presented. Finally, conclusions and outlooks in this field are provided.

2D MOF-derived porous NiCoSe nanosheet arrays on Ni foam for overall water splitting

A novel 2D porous NiCoSe nanosheet arrays were grown on Ni foam using ZIF-67 as precursors, which exhibited outstanding bifunctional electrocatalytic activity and superior durability for overall water splitting.

Layered double hydroxide-based electrocatalysts for the oxygen evolution reaction: identification and tailoring of active sites, and superaerophobic nanoarray electrode assembly

The electrocatalytic oxygen evolution reaction (OER) is a critical half-cell reaction for hydrogen production via water electrolysis. However, the practical OER suffers from sluggish kinetics and thus requires efficient electrocatalysts. Transition metal-based layered double hydroxides (LDHs) represent one of the most active classes of OER catalysts. An in-depth understanding of the activity of LDH based electrocatalysts can promote further rational design and active site regulation of high-performance electrocatalysts. In this review, the fundamental understanding of the structural characteristics of LDHs is demonstrated first, then comparisons and in-depth discussions of recent advances in LDHs as highly active OER catalysts in alkaline media are offered, which include both experimental and computational methods. On top of the active site identification and structural characterization of LDHs on an atomic scale, strategies to promote the OER activity are summarised, including doping, intercalation and defect-making. Furthermore, the concept of superaerophobicity, which has a profound impact on the performance of gas evolution electrodes, is explored to enhance LDHs and their derivatives for a large scale OER. In addition, certain operating standards for OER measurements are proposed to avoid inconsistency in evaluating the OER activity of LDHs. Finally, several key challenges in using LDHs as anode materials for large scale water splitting, such as the issue of stability and the adoption of membrane-electrode-assembly based electrolysers, are emphasized to shed light on future research directions.

Recent advances in ternary layered double hydroxide electrocatalysts for the oxygen evolution reaction

The recent advances in ternary layered double hydroxide electrocatalysts, including the strategies used for the design, synthesis, and evaluation of their performance for oxygen evolution reaction are reviewed in this account.