Formation of a Ni(OH)2/NiOOH active redox couple on nickel nanowires for formaldehyde detection in alkaline media

Graphitic Carbon Nitride Structures on Carbon Cloth Containing Ultra- and Nano-Dispersed NiO for Photoactivated Oxygen Evolution

The development of low-cost and high-efficiency oxygen evolution reaction (OER) photoelectrocatalysts is a key requirement for H2 generation via solar-assisted water splitting. In this study, we report on an amenable fabrication route to carbon cloth-supported graphitic carbon nitride (gCN) nanoarchitectures, featuring a modular dispersion of NiO as co-catalyst. The synergistic interaction between gCN and NiO, along with the tailoring of their size and spatial distribution, yield very attractive OER performances and durability in freshwater splitting, of great significance for practical end-uses. The potential of gCN electrocatalysts containing ultra-dispersed, i. e. "quasi-atomic" NiO, exhibiting a higher activity than the ones containing nickel oxide nanoaggregates, is further highlighted by their activity even in real seawater. This work suggests that efficient OER catalysts can be designed through the construction of optimized interfaces between transition metal oxides and carbon nitride, yielding inexpensive and promising noble metal-free systems for real-world applications.

An Enzyme-Free Impedimetric Sensor Based on Flower-like NiO/Carbon Microspheres for L-Glutamic Acid Assay

This research introduces a non-enzymatic electrochemical sensor utilizing flower-like nickel oxide/carbon (fl-NiO/C) microspheres for the precise detection of L-glutamic acid (LGA), a crucial neurotransmitter in the field of healthcare and a frequently utilized food additive and flavor enhancer. The fl-NiO/C were synthesized with controllable microstructures using metal-organic frameworks (MOFs) as precursors followed by a simple calcination process. The uniformly synthesized fl-NiO/C microspheres were further characterized using Fourier transform infrared spectroscopy (FTIR), X-ray powder diffraction (XRD), energy-dispersive X-ray spectroscopy (EDX), and field emission scanning electron microscopy (FE-SEM). The fl-NiO/C was utilized as a modifier on the surface of a glassy carbon electrode, and an impedimetric sensor based on electrochemical impedance spectroscopy (EIS) was developed for the detection of LGA. The proposed sensor demonstrated excellent catalytic activity and selectivity towards LGA across a broad concentration range of 10-800 μM with a sensitivity of 486.9 µA.mM-1.cm-2 and a detection limit of 1.28 µM (S/N = 3). The sensor was also employed to identify LGA in blood plasma samples, yielding results that align with those obtained through HPLC. This achievement highlights the potential of fl-NiO/C microspheres in advancing cutting-edge biosensing applications.

NiCo-LDH coupled with 2D ZIF-derived Co nitrogen doped carbon nanosheet arrays as a self-supporting electrocatalyst for detection of formaldehyde

Formaldehyde is susceptible to illegal addition to foodstuffs to extend their shelf life due to its antimicrobial, preservative and bleaching properties. In this study, a self-supporting "nanosheet on nanosheet" arrays electrocatalyst with core-shell heterostructure was prepared in situ by coupling NiCo layer double hydroxide with 2D ZIF derived Co-nitrogen-doped porous carbon on carbon cloth (Co-N/C@NiCo-LDH NSAs/CC). Co-N/C nanosheet arrays act as a scaffold core with good electrical conductivity, providing more NiCo-LDH nucleation sites to avoid NiCo-LDH agglomeration, thus having fast mass/charge transfer performance. While the NiCo-LDH nanosheet arrays shell with high specific surface area provide more active sites for electrochemical reactions. As an electrocatalytic sensing electrode, Co-N/C@NiCo-LDH NSAs/CC has a wide linear range of 1 μM to 13 mM for formaldehyde detection, and the detection limit is 82 nM. Besides, the sensor has been applied to the detection of formaldehyde in food samples with satisfactory results.

Activating reversible carbonate reactions in Nasicon solid electrolyte-based Na-air battery via in-situ formed catholyte

Out of practicality, ambient air rather than oxygen is preferred as a fuel in electrochemical systems, but CO2 and H2O present in air cause severe irreversible reactions, such as the formation of carbonates and hydroxides, which typically degrades performance. Herein, we report on a Na-air battery enabled by a reversible carbonate reaction (Na2CO3·xH2O, x = 0 or 1) in Nasicon solid electrolyte (Na3Zr2Si2PO12) that delivers a much higher discharge potential of 3.4 V than other metal-air batteries resulting in high energy density and achieves > 86 % energy efficiency at 0.1 mA cm-2 over 100 cycles. This cell design takes advantage of moisture in ambient air to form an in-situ catholyte via the deliquescent property of NaOH. As a result, not only reversible electrochemical reaction of Na2CO3·xH2O is activated but also its kinetics is facilitated. Our results demonstrate the reversible use of free ambient air as a fuel, enabled by the reversible electrochemical reaction of carbonates with a solid electrolyte.

Recent Advances in Electrochemical Sensors for Formaldehyde

Formaldehyde, a ubiquitous indoor air pollutant, plays a significant role in various biological processes, posing both environmental and health challenges. This comprehensive review delves into the latest advancements in electrochemical methods for detecting formaldehyde, a compound of growing concern due to its widespread use and potential health hazards. This review underscores the inherent advantages of electrochemical techniques, such as high sensitivity, selectivity, and capability for real-time analysis, making them highly effective for formaldehyde monitoring. We explore the fundamental principles, mechanisms, and diverse methodologies employed in electrochemical formaldehyde detection, highlighting the role of innovative sensing materials and electrodes. Special attention is given to recent developments in nanotechnology and sensor design, which significantly enhance the sensitivity and selectivity of these detection systems. Moreover, this review identifies current challenges and discusses future research directions. Our aim is to encourage ongoing research and innovation in this field, ultimately leading to the development of advanced, practical solutions for formaldehyde detection in various environmental and biological contexts.

Nanomaterials-based biosensor and their applications: A review

A sensor can be called ideal or perfect if it is enriched with certain characteristics viz., superior detections range, high sensitivity, selectivity, resolution, reproducibility, repeatability, and response time with good flow. Recently, biosensors made of nanoparticles (NPs) have gained very high popularity due to their excellent applications in nearly all the fields of science and technology. The use of NPs in the biosensor is usually done to fill the gap between the converter and the bioreceptor, which is at the nanoscale. Simultaneously the uses of NPs and electrochemical techniques have led to the emergence of biosensors with high sensitivity and decomposition power. This review summarizes the development of biosensors made of NPssuch as noble metal NPs and metal oxide NPs, nanowires (NWs), nanorods (NRs), carbon nanotubes (CNTs), quantum dots (QDs), and dendrimers and their recent advancement in biosensing technology with the expansion of nanotechnology.

IoT Electrochemical Sensor with Integrated Ni(OH)2-Ni Nanowires for Detecting Formaldehyde in Tap Water

Simple, low-cost methods for sensing volatile organic compounds that leave no trace and do not have a detrimental effect on the environment are able to protect communities from the impacts of contaminants in water supplies. This paper reports the development of a portable, autonomous, Internet of Things (IoT) electrochemical sensor for detecting formaldehyde in tap water. The sensor is assembled from electronics, i.e., a custom-designed sensor platform and developed HCHO detection system based on Ni(OH)₂-Ni nanowires (NWs) and synthetic-paper-based, screen-printed electrodes (pSPEs). The sensor platform, consisting of the IoT technology, a Wi-Fi communication system, and a miniaturized potentiostat can be easily connected to the Ni(OH)₂-Ni NWs and pSPEs via a three-terminal electrode. The custom-made sensor, which has a detection capability of 0.8 µM/24 ppb, was tested for an amperometric determination of the HCHO in deionized (DI) and tap-water-based alkaline electrolytes. This promising concept of an electrochemical IoT sensor that is easy to operate, rapid, and affordable (it is considerably cheaper than any lab-grade potentiostat) could lead to the straightforward detection of HCHO in tap water.

Exchange Bias Effect of Ni@(NiO,Ni(OH)2) Core/Shell Nanowires Synthesized by Electrochemical Deposition in Nanoporous Alumina Membranes

Tuning and controlling the magnetic properties of nanomaterials is crucial to implement new and reliable technologies based on magnetic hyperthermia, spintronics, or sensors, among others. Despite variations in the alloy composition as well as the realization of several post material fabrication treatments, magnetic heterostructures as ferromagnetic/antiferromagnetic coupled layers have been widely used to modify or generate unidirectional magnetic anisotropies. In this work, a pure electrochemical approach has been used to fabricate core (FM)/shell (AFM) Ni@(NiO,Ni(OH)₂) nanowire arrays, avoiding thermal oxidation procedures incompatible with integrative semiconductor technologies. Besides the morphology and compositional characterization of these core/shell nanowires, their peculiar magnetic properties have been studied by temperature dependent (isothermal) hysteresis loops, thermomagnetic curves and FORC analysis, revealing the existence of two different effects derived from Ni nanowires' surface oxidation over the magnetic performance of the array. First of all, a magnetic hardening of the nanowires along the parallel direction of the applied magnetic field with respect their long axis (easy magnetization axis) has been found. The increase in coercivity, as an effect of surface oxidation, has been observed to be around 17% (43%) at 300 K (50 K). On the other hand, an increasing exchange bias effect on decreasing temperature has been encountered when field cooling (3T) the oxidized Ni@(NiO,Ni(OH)₂) nanowires below 100 K along their parallel lengths.

Facile Gram-Scale Synthesis of NiO Nanoflowers for Highly Selective and Sensitive Electrocatalytic Detection of Hydrazine

The design and development of efficient and electrocatalytic sensitive nickel oxide nanomaterials have attracted attention as they are considered cost-effective, stable, and abundant electrocatalytic sensors. However, although innumerable electrocatalysts have been reported, their large-scale production with the same activity and sensitivity remains challenging. In this study, we report a simple protocol for the gram-scale synthesis of uniform NiO nanoflowers (approximately 1.75 g) via a hydrothermal method for highly selective and sensitive electrocatalytic detection of hydrazine. The resultant material was characterized by scanning electron microscopy, X-ray photoelectron spectroscopy, and X-ray diffraction. For the production of the modified electrode, NiO nanoflowers were dispersed in Nafion and drop-cast onto the surface of a glassy carbon electrode (NiO NF/GCE). By cyclic voltammetry, it was possible to observe the excellent performance of the modified electrode toward hydrazine oxidation in alkaline media, providing an oxidation overpotential of only +0.08 V vs Ag/AgCl. In these conditions, the peak current response increased linearly with hydrazine concentration ranging from 0.99 to 98.13 μmol L^-1. The electrocatalytic sensor showed a high sensitivity value of 0.10866 μA L μmol^-1. The limits of detection and quantification were 0.026 and 0.0898 μmol L^-1, respectively. Considering these results, NiO nanoflowers can be regarded as promising surfaces for the electrochemical determination of hydrazine, providing interesting features to explore in the electrocatalytic sensor field.

Bismuth-coated screen-printed electrodes for the simple voltammetric determination of formaldehyde

For the first time, bismuth modified electrodes have been used for the voltammetric detection of formaldehyde (FM). The well-known method of forming formaldehyde hydrazone (FAH) in the presence of hydrazine sulphate was used to convert the hydrated form of FM into its electrochemically active derivative. Various experimental conditions for differential pulse voltammetry were studied to achieve the best analytical performance. The FAH reduction current (FM response) reaches its maximum value at a pH of a phosphate buffer solution of 5.2 ± 0.1 in the presence of 0.09-0.12 M hydrazine sulfate on a bismuth film preliminarily precipitated for 8-12 min from acidic Bi(III) acetate solutions at an electrolysis potential of -1.0 V on the surface of a screen-printed carbon electrode (SPCE). A dendritic-like film structure was created on the SPCE surface. Under the optimized conditions a linear calibration curve over the range of 0.01-5 mg L^-1 (0.33-167 μM) FM was achieved, with a detection limit of 0.002 mg L^-1 (0.06 μM). The determination of FM in waste water, melt water from snow within the city industrial zone, and a widely used pharmaceutical preparation "Endofalk®" with good results revealed the potential applicability of a bismuth modified SPCE (BiSPCE) for trace analysis.

Ni(OH)2-Type Nanoparticles Derived from Ni Salen Polymers: Structural Design toward Functional Materials for Improved Electrocatalytic Performance

Herein, we report the potential-driven electrochemical transformation carried out in basic media of two Ni2+ salen polymers, (poly(NiSalen)s), abbreviated as poly(meso-NiSaldMe) and poly(NiSaltMe). These two polymers, with different configurations of methyl substituents on the imine bridge, were used as precursors for the preparation of electrocatalytically active nickel hydroxide [Ni(OH)2]-type nanoparticles (NPs) anchored in the polymeric matrix as poly[SalenNi(OH)2]. The use of potentiodynamic and potentiostatic electropolymerization conditions for the deposition of polymeric precursors allowed us to control the molecular architecture of poly(NiSalen)s and NPs derived from them. Thus, we obtained different arrangements of NPs embedded in morphologically different poly(Salen) matrixes, indicating their electrocatalytic activity toward ethanol to different extents. Moreover, we found a direct relationship between the electrochemical stability of the poly(NiSalen) precursors operating in the organic solvent-based electrolyte solutions and the easiness of their transformation into Ni(OH)2 NPs operating in the aqueous alkaline media. Poly(NiSalen)s and Ni(OH)2-type NPs were characterized by X-ray photoelectron spectroscopy, scanning electron microscopy, and transmission electron microscopy.

Nanoimpact Electrochemistry to Quantify the Transformation and Electrocatalytic Activity of Ni(OH)2 Nanoparticles: Toward the Size-Activity Relationship at High Throughput

The fast establishment of structure-reactivity relationships is crucial to identifying the most appropriate nanoparticles (NPs) for a given application. This requires the development of methodologies allowing, simultaneously, the unraveling of the NPs geometry and the screening of their reactivity. Herein, nanoimpact electrochemistry (NIE) allows for quantifying the transformation and measuring the electrocatalytic activity for the oxygen evolution reaction (OER) of >100 Ni(OH)₂ NPs of a wide range of size (NP radii from 25 to 100 nm). This is achieved by scanning electrochemical microscopy in a generation/collection-like mode, with one electrode being used to electrogenerate by local precipitation colloidal Ni(OH)₂ NPs and the second one being used to collect them by NIE. It allows (i) quantifying the reductive and oxidative conversion of the Ni(OH)₂ NPs and (ii) separating the electrochemical conversion and the OER electrocatalysis, leading to the evaluation of a structure-activity relationship.

Bimetallic nickel/manganese phosphate–carbon nanofiber electrocatalyst for the oxidation of formaldehyde in alkaline medium

The development of earth-abundant transition metal-based catalysts, supported by a conductive carbonaceous matrix, has received great attention in the field of conversion of formaldehyde derivatives into toxic-free species. Herein, we report a comprehensive investigation of bimetallic electrocatalyst activity towards the electrooxidation of formaldehyde. The bimetallic phosphate catalyst is prepared by co-precipitation of Ni and Mn phosphate precursors using a simple reflux approach. Then the bimetallic catalyst is produced by mixing the Ni/Mn with carbon fibres (CNFs). The structural properties and crystallinity of the catalyst were investigated by using several techniques, such as scanning electron microscopy, X-ray diffraction, energy-dispersive X-ray spectroscopy, and Brunauer Emmett−Teller theory. The system performance was studied under potentiostatic conditions. Some theoretical thermodynamic and kinetic models were applied to assess the system performance. Accordingly, key electrochemical parameters, including surface coverage (Γ) of active species, charge transfer rate (k_s), diffusion coefficient of the formaldehyde (D), and catalytic rate constant (k_cat) were calculated at Γ = 1.690 × 10⁻⁴ mmol cm⁻², k_s = 1.0800 s⁻¹, D = 1.185 × 10⁻³ cm² s⁻¹ and k_cat = 1.08 × 10⁵ cm³ mol⁻¹ s⁻¹. These findings demonstrate the intrinsic electrocatalytic activity of formaldehyde electrooxidation on nickel/manganese phosphate- CNFs in alkaline medium.

The catalytic performance of bimetallic Ni/Mn phosphate–carbon nanofiber composite catalyst is better than mono metallic catalysts toward electrooxidation of formaldehyde.

Palladium-Nickel Electrocatalysts on Nitrogen-Doped Reduced Graphene Oxide Nanosheets for Direct Hydrazine/Hydrogen Peroxide Fuel Cells

In the present work, nitrogen-doped reduced graphene oxide-supported (NrGO) bimetallic Pd–Ni nanoparticles (NPs), fabricated by means of the electrochemical reduction method, are investigated as an anode electrocatalyst in direct hydrazine–hydrogen peroxide fuel cells (DHzHPFCs). The surface and structural characterization of the synthesized catalyst affirm the uniform deposition of NPs on the distorted NrGO. The electrochemical studies indicate that the hydrazine oxidation current density on Pd–Ni/NrGO is 1.81 times higher than that of Pd/NrGO. The onset potential of hydrazine oxidation on the bimetallic catalyst is also slightly more negative, i.e., the catalyst activity and stability are improved by Ni incorporation into the Pd network. Moreover, the Pd–Ni/NrGO catalyst has a large electrochemical surface area, a low activation energy value and a low resistance of charge transfer. Finally, a systematic investigation of DHzHPFC with Pd–Ni/NrGO as an anode and Pt/C as a cathode is performed; the open circuit voltage of 1.80 V and a supreme power density of 216.71 mW cm−2 is obtained for the synthesized catalyst at 60 °C. These results show that the Pd–Ni/NrGO nanocatalyst has great potential to serve as an effective and stable catalyst with low Pd content for application in DHzHPFCs.

Platinum Modulates Redox Properties and 5-Hydroxymethylfurfural Adsorption Kinetics of Ni(OH)2 for Biomass Upgrading

Nickel hydroxide (Ni(OH)₂ ) is a promising electrocatalyst for the 5-hydroxymethylfurfural oxidation reaction (HMFOR) and the dehydronated intermediates Ni(OH)O species are proved to be active sites for HMFOR. In this study, Ni(OH)₂ is modified by platinum to adjust the electronic structure and the current density of HMFOR improves 8.2 times at the Pt/Ni(OH)₂ electrode compared with that on Ni(OH)₂ electrode. Operando methods reveal that the introduction of Pt optimized the redox property of Ni(OH)₂ and accelerate the formation of Ni(OH)O during the catalytic process. Theoretical studies demonstrate that the enhanced Ni(OH)O formation kinetics originates from the reduced dehydrogenation energy of Ni(OH)₂ . The product analysis and transition state simulation prove that the Pt also reduces adsorption energy of HMF with optimized adsorption behavior as Pt can act as the adsorption site of HMF. Overall, this work here provides a strategy to design an efficient and universal nickel-based catalyst for HMF electro-oxidation, which can also be extended to other Ni-based catalysts such as Ni(HCO₃ )₂ and NiO.

Pulsed Reverse Potential Electrodeposition of Carbon-Free Ni/NiO Nanocomposite Thin Film Electrode for Energy Storage Supercapacitor Electrodes

A combined cyclic voltammetry and pulse reverse potential electrodeposition technique has been used to synthesize carbon-free Ni/NiO nanocomposite thin film supercapacitor electrode. The structural and morphological analyses have revealed the presence of crystalline phases of both Ni and NiO in the form of nanospheres of size ~50 nm. The electrochemical analysis of the Ni/NiOna nocomposite electrode has shown a remarkable performance by delivering a high specific capacitance of 2000 Fg−1 at an applied current load of 1 Ag−1 and a capacitance retention of 98.6%, after over 800 cycles under a high current load of 20 Ag−1.

Naphthalimide Derivative-Functionalized Metal-Organic Framework for Highly Sensitive and Selective Determination of Aldehyde by Space Confinement-Induced Sensitivity Enhancement Effect

Facile and sensitive determination of formaldehyde (FA) in indoor environments still remains challenging. Herein, a fluorescent probe, termed PHN@MOF, was synthesized by embedding the fluorescent molecule of N-propyl-4-hydrazine-naphthalimide (PHN) into a metal-organic framework (MOF) for sensitive and visual monitoring of FA. The hydrazine group of PHN acts as the specific reaction group with FA based on the condensation reaction. The host of MOF (UiO-66-NH₂) offers the surrounding confinement space required for the reaction. Owing to the enrichment effect and molecular sieve selection of UiO-66-NH₂ to FA, PHN@MOF, compared with free PHN, exhibits very high sensitivity and selectivity based on space confinement-induced sensitivity enhancement (SCISE). Moreover, the fluorescence of UiO-66-NH₂ offers a reference signal for FA detection. Using this ratiometric fluorescent PHN@MOF probe, a colorimetric gel plate and test paper were developed and used to visually monitor FA in air.

Supporting effects of a N-doped carbon film electrode on an electrodeposited Ni@Ni(OH)2 core-shell nanocatalyst in accelerating electrocatalytic oxidation of oligosaccharides

The supporting effect of a N-doped carbon film induced superior crystallinity in electrodeposited Ni@Ni(OH)2 core-shell nanoparticles. This improvement resulted in a much higher regeneration rate of catalytic sites (NiOOH), leading to higher oxidation currents of sugars. Also, the overpotential of the maltopentaose (G5) oxidation reaction decreased significantly, probably due to the effect of the electrostatic interaction between NPs and G5.

Electrosynthesis of three-dimensional nanoporous nickel on screen-printed electrode used for the determination of narirutin in citrus wastewater

In this study, an electrochemical sensor was designed for the detection of narirutin using three-dimensional nanostructured porous nickel on screen-printed electrode (3DnpNi/SPE). The modified electrode was successfully synthesized by the dynamic hydrogen bubble template method. The 3DnpNi/SPE was characterized by spectroscopic, microscopic, and electrochemical methods. The results showed that the 3DnpNi/SPE presents good electrocatalytic activity for the oxidation of narirutin. The quantification of narirutin was conducted by differential pulse voltammetry, which showed a wide concentration range (1.0 × 10^-7 - 1.0 × 10^-5 mol L^-1), with low detection limit (3.9 × 10^-8 mol L^-1), and excellent sensitivity (0.31 A L mol^-1). The proposed electrode was applied toward the determination of narirutin in yellow water sample from the citrus industry, where it presented a good degree of accuracy. The 3DnpNi/SPE showed repeatability, long-term stability, and selectivity. The results obtained showed agreement with those obtained by HPLC/DAD method. Chemical compounds studied in this article.

Electrically Transduced Gas Sensors Based on Semiconducting Metal Oxide Nanowires

Semiconducting metal oxide-based nanowires (SMO-NWs) for gas sensors have been extensively studied for their extraordinary surface-to-volume ratio, high chemical and thermal stabilities, high sensitivity, and unique electronic, photonic and mechanical properties. In addition to improving the sensor response, vast developments have recently focused on the fundamental sensing mechanism, low power consumption, as well as novel applications. Herein, this review provides a state-of-art overview of electrically transduced gas sensors based on SMO-NWs. We first discuss the advanced synthesis and assembly techniques for high-quality SMO-NWs, the detailed sensor architectures, as well as the important gas-sensing performance. Relationships between the NWs structure and gas sensing performance are established by understanding general sensitization models related to size and shape, crystal defect, doped and loaded additive, and contact parameters. Moreover, major strategies for low-power gas sensors are proposed, including integrating NWs into microhotplates, self-heating operation, and designing room-temperature gas sensors. Emerging application areas of SMO-NWs-based gas sensors in disease diagnosis, environmental engineering, safety and security, flexible and wearable technology have also been studied. In the end, some insights into new challenges and future prospects for commercialization are highlighted.

Synthesis of a NiMoO4/3D-rGO Nanocomposite via Starch Medium Precipitation Method for Supercapacitor Performance

This paper presents research on the synergistic effects of nickel molybdate and reduced graphene oxide as a nanocomposite for further development of energy storage systems. An enhancement in the electrochemical performance of supercapacitor electrodes occurs by synthesizing highly porous structures and achieving more surface area. In this work, a chemical precipitation technique was used to synthesize the NiMoO4/3D-rGO nanocomposite in a starch media. Starch was used to develop the porosities of the nanostructure. A temperature of 350 °C was applied to transform graphene oxide sheets to reduced graphene oxide and remove the starch to obtain the NiMoO4/3D-rGO nanocomposite with porous structure. The X-ray diffraction pattern of the NiMoO4 nano particles indicated a monoclinic structure. Also, the scanning electron microscope observation showed that the NiMoO4 NPs were dispersed across the rGO sheets. The electrochemical results of the NiMoO4/3D-rGO electrode revealed that the incorporation of rGO sheets with NiMoO4 NPs increased the capacity of the nanocomposite. Therefore, a significant increase in the specific capacity of the electrode was observed with the NiMoO4/3D-rGO nanocomposite (450 Cg−1 or 900 Fg−1) when compared with bare NiMoO4 nanoparticles (350 Cg−1 or 700 Fg−1) at the current density of 1 A g−1. Our findings show that the incorporation of rGO and NiMoO4 NP redox reactions with a porous structure can benefit the future development of supercapacitors.

Monitoring compositional changes in Ni(OH)2 electrocatalysts employed in the oxygen evolution reaction

Relating morphology and compositional changes spatially across a catalyst is important for understanding the active site involved in a reaction which is studied here for the OER at Ni(OH)₂.