Cross-nanoflower CoS2 in-situ self-assembled on rGO sheet as advanced anode for lithium/sodium ion battery

Reaction Mechanism and Performance of Innovative 2D Germanane-Silicane Alloys: SixGe1- xH Electrodes in Lithium-Ion Batteries

The adjustable structures and remarkable physicochemical properties of 2D monoelemental materials, such as silicene and germanene, have attracted significant attention in recent years. They can be transformed into silicane (SiH) and germanane (GeH) through covalent functionalization via hydrogen atom termination. However, synthesizing these materials with a scalable and low-cost fabrication process to achieve high-quality 2D SiH and GeH poses challenges. Herein, groundbreaking 2D SiH and GeH materials with varying compositions, specifically Si0.25Ge0.75H, Si0.50Ge0.50H, and Si0.75Ge0.25H, are prepared through a simple and efficient chemical exfoliation of their Zintl phases. These 2D materials offer significant advantages, including their large surface area, high mechanical flexibility, rapid electron mobility, and defect-rich loose-layered structures. Among these compositions, the Si0.50Ge0.50H electrode demonstrates the highest discharge capacity, reaching up to 1059 mAh g-1 after 60 cycles at a current density of 75 mA g-1. A comprehensive ex-situ electrochemical analysis is conducted to investigate the reaction mechanisms of lithiation/delithiation in Si0.50Ge0.50H. Subsequently, an initial assessment of the c-Li15(SixGe1- x)4 phase after lithiation and the a-Si0.50Ge0.50 phase after delithiation is presented. Hence, this study contributes crucial insights into the (de)lithiation reaction mechanisms within germanane-silicane alloys. Such understanding is pivotal for mastering promising materials that amalgamate the finest properties of silicon and germanium.

Interface Engineering of MOF-Derived Co3O4@CNT and CoS2@CNT Anodes with Long Cycle Life and High-Rate Properties in Lithium/Sodium-Ion Batteries

Metal-organic framework materials can be converted into carbon-based nanoporous materials by pyrolysis, which have a wide range of applications in energy storage. Here, we design special interface engineering to combine the carbon skeleton and nitrogen-doped carbon nanotubes (CNTs) with the transition metal compounds (TMCs) well, which mitigates the bulk effect of the TMCs and improves the conductivity of the electrodes. Zeolitic imidazolate framework-67 is used as a precursor to form a carbon skeleton and a large number of nitrogen-doped CNTs by pyrolysis followed by the in situ formation of Co3O4 and CoS2, and finally, Co3O4@CNTs and CoS2@CNTs are synthesized. The obtained anode electrodes exhibit a long cycle life and high-rate properties. In lithium-ion batteries (LIBs), Co3O4@CNTs have a high capacity of 581 mAh g-1 at a high current of 5 A g-1, and their reversible capacity is still 1037.6 mAh g-1 after 200 cycles at 1 A g-1. In sodium-ion batteries (SIBs), CoS2@CNTs have a capacity of 859.9 mAh g-1 at 0.1 A g-1 and can be retained at 801.2 mAh g-1 after 50 cycles. The unique interface engineering and excellent electrochemical properties make them ideal anode materials for high-rate, long-life LIBs and SIBs.

Induced Bimetallic Sulfide Growth with Reduced Graphene Oxide for High-Performance Sodium Storage

Metal sulfide has been considered an ideal sodium-ion battery (SIB) anode material based on its high theoretical capacity. Nevertheless, the inevitable volume expansion during charge-discharge processes can lead to unsatisfying electrochemical properties, which limits its further large-scale application. In this contribution, laminated reduced graphene oxide (rGO) successfully induced the growth of SnCoS₄ particles and self-assembled into a nanosheet-structured SnCoS₄@rGO composite through a facile solvothermal procedure. The optimized material can provide abundant active sites and facilitate Na⁺ ion diffusion due to the synergistic interaction between bimetallic sulfides and rGO. As the anode of SIBs, this material maintains a high capacity of 696.05 mAh g^-1 at 100 mA g^-1 after 100 cycles and a high-rate capability of 427.98 mAh g^-1 even at a high current density of 10 A g^-1. Our rational design offers valuable inspiration for high-performance SIB anode materials.

Removal of Carbamazepine in Aqueous Solution by CoS2/Fe2+/PMS Process

Carbamazepine (CBZ), as a typical pharmaceutical and personal care product (PPCP), cannot be efficiently removed by the conventional drinking water and wastewater treatment process. In this work, the CoS2/Fe2+/PMS process was applied for efficient elimination of CBZ. The CBZ removal efficiency of CoS2/Fe2+/PMS was 2.5 times and 23 times higher than that of CoS2/PMS and Fe2+/PMS, respectively. The intensity of DMPO-HO• and DMPO-SO4•− followed the order of Fe2+/PMS < CoS2/PMS < CoS2/Fe2+/PMS, also suggesting the CoS2/Fe2+/PMS process has the highest oxidation activity. The effects of reaction conditions (e.g., CoS2 dosage, Fe2+ concentration, PMS concentration, initial CBZ concentration, pH, temperature) and water quality parameters (e.g., SO42−, NO3−, H2PO4−, Cl−, NH4+, humic acid) on the degradation of CBZ were also studied. Response surface methodology analysis was carried out to obtain the best conditions for the removal of CBZ, which are: Fe2+ = 70 µmol/L, PMS = 240 µmol/L, CoS2 = 0.59 g/L. The sustainability test demonstrated that the repeated use of CoS2 for 8 successive cycles resulted in little function decrease (<10%). These findings suggest that CoS2/Fe2+/PMS may be a promising method for advanced treatment of tailwater from sewage treatment plant.

Sulfuration Temperature-Dependent Hydrogen Evolution Performance of CoS2 Nanowires

Densely aligned CoS2 nanowires (NWs) on chemically durable stainless steel fibers felt (SSF) substates were synthesized by thermal sulfuring Co3O4 NWs, which were oxidized from hydrothermal synthesized Co(OH)y(CO3)(1−0.5y)·nH2O NWs precursors. The effect of sulfuration temperature on the composition, morphology, and HER performance of the products was studied in detail. The results show that the high purity together with the enlarged density of active sites given by the twisted morphology of the CoS2 NWs sulfured at 500 °C guarantee its superior hydrogen evolution reaction (HER) performance compared with other samples sulfured at lower temperatures.

Composite Nanoarchitectonics with CoS2 Nanoparticles Embedded in Graphene Sheets for an Anode for Lithium-Ion Batteries

Cobalt sulfides are attractive as intriguing candidates for anodes in Lithium-ion batteries (LIBs) due to their unique chemical and physical properties. In this work, CoS2@rGO (CSG) was synthesized by a hydrothermal method. TEM showed that CoS2 nanoparticles have an average particle size of 40 nm and were uniformly embedded in the surface of rGO. The battery electrode was prepared with this nanocomposite material and the charge and discharge performance was tested. The specific capacity, rate, and cycle stability of the battery were systematically analyzed. In situ XRD was used to study the electrochemical transformation mechanism of the material. The test results shows that the first discharge specific capacity of this nanocomposite reaches 1176.1 mAhg-1, and the specific capacity retention rate is 61.5% after 100 cycles, which was 47.5% higher than that of the pure CoS2 nanomaterial. When the rate changes from 5.0 C to 0.2 C, the charge-discharge specific capacity of the nanocomposite material can almost be restored to the initial capacity. The above results show that the CSG nanocomposites as a lithium-ion battery anode electrode has a high reversible specific capacity, better rate performance, and excellent cycle performance.

Hierarchical CoS2/MoS2 flower-like heterostructured arrays derived from polyoxometalates for efficient electrocatalytic nitrogen reduction under ambient conditions

Electrochemical nitrogen reduction reaction (NRR) has been identified as a prospective alternative for sustainable ammonia production. Developing cost-effective and highly efficient electrocatalysts is critical for NRR under ambient conditions. Herein, the hierarchical cobalt-molybdenum bimetallic sulfide (CoS₂/MoS₂) flower-like heterostructure assembled from well-aligned nanosheets has been easily fabricated through a one-step strategy. The efficient synergy between different components and the formation of heterostructure in CoS₂/MoS₂ nanosheets with abundant active sites makes the non-noble metal catalyst CoS₂/MoS₂ highly effective in NRR, with a high NH₃ yield rate (38.61 μg h^-1 mg_cat.^-1), Faradaic efficiency (34.66%), high selectivity (no formation of hydrazine) and excellent long-term stability in 1.0 mol L^-1 K₂SO₄ electrolyte (pH = 3.5) at -0.25 V versus the reversible hydrogen electrode (vs. RHE) under ambient conditions, exceeding much recently reported cobalt- and molybdenum-based materials, even catch up with some noble-metal-based catalyst. Density functional theory (DFT) calculation indicates that the formation of N₂H* species on CoS₂(200)/MoS₂(002) is the rate-determining step via both the alternating and distal pathways with the maximum ΔG values (1.35 eV). These results open up opportunities for the development of efficient non-precious bimetal-based catalysts for NRR.

Electrochemical Fixation of Nitrogen by Promoting N2 Adsorption and N-N Triple Bond Cleavage on the CoS2/MoS2 Nanocomposite

An electrochemical N₂ reduction reaction (NRR), as an environmentally benign method to produce NH₃, is a suitable alternative to substitute the energy-intensive Haber-Bosch technology. Unfortunately, to date, it is obstructed by the lack of efficient electrocatalysts. Here, a CoS₂/MoS₂ nanocomposite with CoS₂ nanoparticles decorated on MoS₂ nanosheets is fabricated and adapted as a catalyst for the NRR. As unveiled by experimental and theoretical results, the strong interaction between CoS₂ and MoS₂ modulates interfacial charge distribution with electrons transferring from CoS₂ to MoS₂. Consequently, a local electrophilic region is formed near the CoS₂ side, which enables effective N₂ absorption. On the other hand, the nucleophilic area formed near the MoS₂ side is in favor of breaking stable N≡N, the potential-determining step (*N₂ → *N₂H) which brings about a much decreased energy barrier than that on pure MoS₂. As a result, this catalyst exhibits an excellent NRR performance, NH₃ yield and Faradaic efficiency of 54.7 μg·h^-1·mg^-1 and 20.8%, respectively, far better than most MoS₂-based catalysts.

In-situ self-assembled hollow urchins F-Co-MOF on rGO as advanced anodes for lithium-ion and sodium-ion batteries

To obtain MOFs materials with good electrochemical performance in both lithium-ion batteries (LIBs) and sodium-ion batteries (SIBs), a kind of hollow urchins Co-MOF with doping fluorine (F) was in-situ assembled on reduced graphene oxide (rGO) using a simple solvothermal reaction. According to XRD, XPS and EDS mapping analysis, the molecular structure should be Co₂[F_x(OH)_1-x]₂(C₈O₄H₄) (denoted as F-Co-MOF). When the composite material is used as active material to assemble LIBs, it not only presents the outstanding reversible capacity (1202.0 mA h g^-1 at 0.1 A g^-1), but also gives the excellent rate performance and cycle performance (771.5 mA h g^-1 at 2 A g^-1 after 550 repeated cycles). The remarkable lithium storage capacity of F-Co-MOF/rGO is also reflected in the full cell, where it can still maintain a high capacity of 165.2 mA h g^-1 after 300 cycles at 0.2 A g^-1. It benefits from the synergistic effect of F-Co-MOF and high conductive rGO networks, so that the reversibility of lithium and sodium storage can be improved. This kind of F doped solvothermal synthesis of MOFs is of great significance for the exploration of high performance materials.

Assembly of MXene/PP Separator and Its Enhancement for Ni-Rich LiNi0.8Co0.1Mn0.1O2 Electrochemical Performance

In this work, a few-layer MXene is prepared and sprinkled on a commercial polypropylene (PP) separator by a facile spraying method to enhance the electrochemistry of the Ni-rich LiNi_0.8Co_0.1Mn_0.1O₂ (NCM811) cathode. Scanning electron microscope (SEM) and X-ray diffraction (XRD) are used to characterize the morphology and structure of MXene. Fourier transform infrared spectroscopy (FT-IR) and a contact angle tester are used to measure the bond structure and surface wettability PP and MXene/PP separator. The effect of the MXene/PP separator on the electrochemical performance of ternary NCM811 material is tested by an electrochemical workstation. The results show that the two-dimensional MXene material could improve the wettability of the separator to the electrolyte and greatly enhance the electrochemical properties of the NCM811 cathode. During 0.5 C current density cycling, the Li/NCM811 cell with MXene/PP separator remains at 166.2 mAh/g after the 100 cycles with ~90.7% retention. The R_ct of MXene/PP cell is measured to be ~28.0 Ω. Combining all analyses results related to MXene/PP separator, the strategy by spraying the MXene on commercial PP is considered as a simple, convenient, and effective way to improve the electrochemical performance of the Ni-rich NCM811 cathode and it is expected to achieve large-scale in high-performance lithium-ion batteries in the near future.

MOF-derived hollow Co4S3/C nanosheet arrays grown on carbon cloth as the anode for high-performance Li-ion batteries

Cobalt sulfide (Co4S3) is considered one of the most promising anode materials for lithium-ion batteries owing to its high specific capacity. However, some disadvantages, such as poor electrical conductivity and volume expansion, lead to low rate capability and may hinder its practical applications. Herein, we firstly fabricated leaf-like hollow Co4S3/C nanosheet arrays growing on carbon cloth (h-Co4S3/C NA@CC) by a facile solution method combined with carbonization, sulfidation and annealing treatments. The carbon coated leaf-like nanosheet structure can facilitate the electron transfer and shorten the ion transfer path, while the hollow space inside Co4S3 can buffer the volume variation. As the anode for LIBs, h-Co4S3/C NA@CC demonstrates an impressive rate capability (654.3 mA h g-1 at 1 A g-1 and 394.1 mA h g-1 at 2 A g-1), and an excellent cycling stability (720 mA h g-1 at 1 A g-1 after 200 cycles and 79% capacity retention at 2 A g-1 after 500 cycles).