Achieving high-energy-density and ultra-stable zinc-ion hybrid supercapacitors by engineering hierarchical porous carbon architecture

Sub-nanopores enabling optimized ion storage performance of carbon cathodes for Zn-ion hybrid supercapacitors

Aqueous Zn-ion hybrid supercapacitors (ZHSs) are attracting significant attention as a promising electrochemical energy storage system. However, carbon cathodes of ZHSs exhibit unsatisfactory ion storage performance due to the large size of hydrated Zn-ions (e.g., [Zn(H2O)6]2+), which encumbers compact ion arrangement and rapid ion transport at the carbon-electrolyte interfaces. Herein, a porous carbon material (HMFC) with abundant sub-nanopores is synthesized to optimize the ion storage performance of the carbon cathode in ZHSs, in which the sub-nanopores effectively promote the dehydration of hydrated Zn-ions and thus optimize the ion storage performance of the carbon cathode in ZHSs. A novel strategy is proposed to study the dehydration behaviors of hydrated Zn-ions in carbon cathodes, including quantitatively determining the desolvation activation energy of hydrated Zn-ions and in-situ monitoring active water content at the carbon-electrolyte interface. The sub-nanopores-induced desolvation effect is verified, and its coupling with large specific surface area and hierarchically porous structure endows the HMFC cathode with improved electrochemical performance, including a 53 % capacity increase compared to the carbon cathode counterpart without sub-nanopores, fast charge/discharge ability that can output 46.0 Wh/kg energy within only 4.4 s, and 98.2 % capacity retention over 20,000 charge/discharge cycles. This work provides new insights into the rational design of porous carbon cathode materials toward high-performance ZHSs.

Unravelling the role of pore structure of biomass-derived porous carbon in charge storage mechanisms for supercapacitors

This study presents findings on the production and analysis of activated carbon (AC), which exhibits a significantly expansive surface area derived from readily available and inexpensive agroforestry waste, specifically coconut shells. The carbon materials displayed encouraging features for electrochemical energy storage applications with a high specific surface area (2920 m2 g-1), an ordered mesoporous structure (∼2.5 nm), and substantial electronic conductivity. By altering the surface properties of AC materials, they exhibited different energy storage responses while using an ionic liquid as an electrolyte. Electrodes composed of AC sourced from coconut shells demonstrated notably high specific capacitance (78 F g-1) and retained capacitance when assessed within symmetric electrical double-layer capacitors (EDLCs) employing organic electrolytes. Interestingly, the AC cell in an organic electrolyte delivered a specific energy (Es) of 67 W h kg-1 at a specific power (Ps) of 1237 W kg-1 at the current density of 1 A g-1 and still provided Es of 64, 60, 58, 57, and 52 W h kg-1 at Ps of 2477, 3724, 4971, 6218 and 12 480 W kg-1 at the current density of 2, 3, 4, 5 and 10 A g-1. This work demonstrates the effect of different pore volumes on the electrocatalytic activity of AC derived from natural product waste. Our results indicate the feasibility of employing these electrodes for lab-scale applications. Thus, the AC material emerges as a highly promising substance, poised to advance the creation of cost-efficient, environmentally sustainable, high-performance, high-power devices.

Recent Advances in Functionalized Biomass-Derived Porous Carbons and their Composites for Hybrid Ion Capacitors

Hybrid ion capacitors (HICs) have aroused extreme interest due to their combined characteristics of energy and power densities. The performance of HICs lies hidden in the electrode materials used for the construction of battery and supercapacitor components. The hunt is always on to locate the best material in terms of cost-effectiveness and overall optimized performance characteristics. Functionalized biomass-derived porous carbons (FBPCs) possess exquisite features including easy synthesis, wide availability, high surface area, large pore volume, tunable pore size, surface functional groups, a wide range of morphologies, and high thermal and chemical stability. FBPCs have found immense use as cathode, anode and dual electrode materials for HICs in the recent literature. The current review is designed around two main concepts which include the synthesis and properties of FBPCs followed by their utilization in various types of HICs. Among monovalent HICs, lithium, sodium, and potassium, are given comprehensive attention, whereas zinc is the only multivalent HIC that is focused upon due to corresponding literature availability. Special attention is also provided to the critical factors that govern the performance of HICs. The review concludes by providing feasible directions for future research in various aspects of FBPCs and their utilization in HICs.

π-Conjugated molecule mediated self-doped hierarchical porous carbons via self-stacking interaction for high-energy and ultra-stable zinc-ion hybrid capacitors

Understanding the self-stacking interactions in precursors can facilitate the preparation of high-performance carbon materials and promote the commercial application of zinc ion hybrid capacitors (ZIHCs). Here, a π-conjugated molecule mediated pyrolysis strategy is presented to prepare carbon materials. Taking intermolecular force simulation (reduced density gradient plots) as a guide, the relationship between the self-stacking interactions in π-conjugated molecules and the structural parameters of carbon materials can be extrapolated. The resultant self-doped hierarchical porous carbons (NHPCs) derived from 1, 8, 4, 5-naphthalenetetracarboxdiimide with suitable self-stacking interactions empower the highest specific surface areas (2038 m2/g) and surface opening macropores. The NHPCs-based ZIHCs deliver a high capacity of 220 mAh/g, a high energy density of 149.5 Wh kg-1 and a super-stable cycle lifespan with 93.2 % capacity retention after 200, 000 cycles. The excellent electrochemical performance roots in the superior hierarchical porous structure with surface opening macropores, which guarantees the structural stability of carbon cathodes upon repeated rounds. Meanwhile, the heteroatom doping further relieves the kinetics concern of Zn2+ uptake/removal to enhance O-Zn-N binding particularly at high discharge currents. Besides, the proton-assisted Zn2+ dual-ion storage mechanism plays an essential role in the energy storage process. This work demonstrates a facile synthesis method and advances the fundamental understanding of its dual-ion storage mechanism.

Hierarchical Porous Activated Carbon Derived from Coconut Shell for Ultrahigh-Performance Supercapacitors

In this research, we successfully produced hierarchical porous activated carbon from biowaste employing one-step KOH activation and applied as ultrahigh-performance supercapacitor electrode materials. The coconut shell-derived activated carbon (CSAC) features a hierarchical porous structure in a honeycomb-like morphology, leading to a high specific surface area (2228 m2 g-1) as well as a significant pore volume (1.07 cm3 g-1). The initial test with the CSAC electrode, conducted in a 6 M KOH loaded symmetric supercapacitor, demonstrated an ultrahigh capacitance of 367 F g-1 at a current density of 0.2 A g-1 together with 92.09% retention after 10,000 cycles at 10 A g-1. More impressively, the zinc-ion hybrid supercapacitor using CSAC as a cathode achieves a high-rate capability (153 mAh g-1 at 0.2 A g-1 and 75 mAh g-1 at 10 A g-1), high energy density (134.9 Wh kg-1 at 175 W kg-1), as well as exceptional cycling stability (93.81% capacity retention after 10,000 cycles at 10 A g-1). Such work thus illuminates a new pathway for converting biowaste-derived carbons into materials for ultrahigh-performance energy storge applications.

Homogeneous activation induced by bacterial cellulose nanofibers to construct interconnected microporous carbons for enhanced capacitive storage

Porous carbons have been widely applied for capacitive energy storage, yet usually suffer from insufficient rate performance because of the sluggish ion transport kinetics in deep and multi-branched pores. Herein, we fabricated an interconnected microporous capacitive carbon (IMCC) by growing D (+)-glucosamine on bacterial cellulose (BC) nanofibers scaffold, followed by carbonization and activation. The BC nanofibers acted as a sacrificial template during pre-carbonization, facilitating the subsequent KOH permeation and homogeneous activation. By taking advantage of the interconnected microporous structure, the IMCC delivers a high capacitance of 302 F g^-1 at 1 A g^-1 and an excellent rate capability of 165 F g^-1 at 100 A g^-1 for aqueous supercapacitor, demonstrating its fast ion transport capability. Impressively, it also shows a superior gravimetric capacity of 177 mAh g^-1 at 0.5 A g^-1 and remains a high value of 72 mAh g^-1 at 20 A g^-1 as a cathode material for Zn-ion hybrid capacitor. This facile and cost-effective design strategy exhibits a great potential to construct carbohydrates-derived interconnected microporous carbon materials for high-rate energy storage.

Status and Opportunities of Zinc Ion Hybrid Capacitors: Focus on Carbon Materials, Current Collectors, and Separators

Zinc ion hybrid capacitors (ZIHCs), which integrate the features of the high power of supercapacitors and the high energy of zinc ion batteries, are promising competitors in future electrochemical energy storage applications. Carbon-based materials are deemed the competitive candidates for cathodes of ZIHC due to their cost-effectiveness, high electronic conductivity, chemical inertness, controllable surface states, and tunable pore architectures. In recent years, great research efforts have been devoted to further improving the energy density and cycling stability of ZIHCs. Reasonable modification and optimization of carbon-based materials offer a remedy for these challenges. In this review, the structural design, and electrochemical properties of carbon-based cathode materials with different dimensions, as well as the selection of compatible, robust current collectors and separators for ZIHCs are discussed. The challenges and prospects of ZIHCs are showcased to guide the innovative development of carbon-based cathode materials and the development of novel ZIHCs.

Synergistic effect of nitrogen and oxygen dopants in 3D hierarchical porous carbon cathodes for ultra-fast zinc ion hybrid supercapacitors

Zinc-ion hybrid supercapacitor is one of the most promising electrochemical energy storage devices for the applications needing both high energy densities and power densities. Nitrogen doping is an effective way to enhance the capacitive performance of porous carbon cathodes in zinc-ion hybrid supercapacitor. However, accurate evidence is yet needed to demonstrate how nitrogen dopants influence the charge storage of Zn²⁺ and H⁺ cations. Herein, we prepared 3D interconnected hierarchical porous carbon nanosheets by a one-step explosion method. The effect of nitrogen dopants on pseudocapacitance was analyzed by the electrochemical behaviors of as-prepared porous carbon samples with similar morphology and pore structure but different nitrogen and oxygen doping levels. Ex-situ XPS and DFT calculation demonstrate that nitrogen dopants promote the pseudocapacitive reactions by lowering the energy barrier for the change of oxidation states of carbonyl moieties. Owing to the improved pseudocapacitance by nitrogen/oxygen dopants and fast diffusion of Zn²⁺ ions in 3D interconnected hierarchical porous carbon matrix, the as-constructed ZIHCs show both high gravimetric capacitance (301 F g^-1 at 0.1 A g^-1) and excellent rate capability (a capacitance retention of 30% at 200 A g^-1).

Revealing the Self-Doping Defects in Carbon Materials for the Compact Capacitive Energy Storage of Zn-Ion Capacitors

Zn-ion capacitors are attracting great attention owing to the abundant and relatively stable Zn anodes but are impeded by the low capacitance of porous carbon cathodes with insufficient energy storage sites. Herein, using ball-milled graphene with different defect densities as the models, we reveal that the self-doping defects of carbon show a capacitive energy storage behavior with robust charge-transfer kinetics, providing a capacitance contribution of ca. 90 F g^-1 per unit of defect density (A_D/A_G value from Raman spectra) in both aqueous and organic electrolytes. Furthermore, a simple NaCl-assisted ball-milling method is developed to prepare novel graphene blocks (BSG) with abundant self-doping defect density, enriched pores, balanced electric conductivity, and high compact density (0.83 g cm^-3). The optimized ion and electron transfer paths promote efficient utilization of the self-doping defects in BSG, contributing to improved gravimetric and volumetric capacitance (224 F g^-1/186 F cm^-3 at 0.5 A g^-1) and remarkable rate performance (52.2% capacitance retention at 20 A g^-1). The defect engineering strategy may open up a new avenue to improve the capacitive performance of dense carbons for Zn-ion capacitors.

Enhanced energy storage of aqueous zinc-carbon hybrid supercapacitors via employing alkaline medium and B, N dual doped carbon cathode

Zinc-based energy storage systems (zinc-air, zinc-nickel and zinc-ion batteries and zinc-ion hybrid supercapacitors (ZHSs) are considered as promising power sources for wide applications from personal electronic devices to electric vehicles. However, these systems, especially the Zn-based hybrid supercapacitors, display unsatisfying power density and energy density, which should be enhanced for their large-scale applications. In this work, aqueous alkaline zinc-carbon hybrid supercapacitors (A-ZCHS) were designed, consisting of B, N dual doped carbon cathode, Zn anode and KOH electrolyte. The B, N dual doped carbon was prepared via thermal treatment of metal-organic frameworks and boric acid, which exhibits abundant hierarchical pore structure (micropore, mesopore and macropore) and suitable defect construction, promoting ion diffusion/charge transfer and providing more rapid surface pseudocapacitance reaction. More obviously, when the optimized B, N dual doped carbon was used as cathode in A-ZCHS and ZHS, more capacitive charge storage and rapider electrochemical kinetics can be observed in A-ZCHS than in ZHS. Therefore, the optimized A-ZCHS displays a high energy density of 115.7 Wh kg^-1 at the power density of 711.6 W kg^-1 with excellent stability, which is much better than most of ZHSs reported previously. The A-ZCHS should be a promising candidate for energy storage applications.

Aqueous Rechargeable Zn-ion Batteries: Strategies for Improving the Energy Storage Performance

The growing demand for the renewable energy storage technologies stimulated the quest for efficient energy storage devices. In recent years, the rechargeable aqueous zinc-based battery technologies are emerging as a compelling alternative to the lithium-based batteries owing to safety, eco-friendliness, and cost-effectiveness. Among the zinc-based energy devices, rechargeable zinc-ion batteries (ZIBs) are drawing considerable attention. However, they are plagued with several issues, including cathode dissolution, dendrite formation, etc.. Despite several efforts in the recent past, ZIBs are still in their infant stages and have yet to reach the stage of large-scale production. Finding stable Zn²⁺ intercalation cathode material with high operating voltage and long cycling stability as well as dendrite-free Zn anode is the main challenge in the development of efficient zinc-ion storage devices. This Review discusses the various strategies, in terms of the engineering of cathode, anode and electrolyte, adopted for improving the charge storage performance of ZIBs and highlights the recent ZIB technological innovations. A brief account on the history of zinc-based devices and various cathode materials tested for ZIB fabrication in the last five years are also included. The main focus of this Review is to provide a detailed account on the rational engineering of the electrodes, electrolytes, and separators for improving the charge storage performance with a future perspective to achieving high energy density and long cycling stability and large-scale production for practical application.

Emerging trends in anion storage materials for the capacitive and hybrid energy storage and beyond

Electrochemical capacitors charge and discharge more rapidly than batteries over longer cycles, but their practical applications remain limited due to their significantly lower energy densities. Pseudocapacitors and hybrid capacitors have been developed to extend Ragone plots to higher energy density values, but they are also limited by the insufficient breadth of options for electrode materials, which require materials that store alkali metal cations such as Li⁺ and Na⁺. Herein, we report a comprehensive and systematic review of emerging anion storage materials for performance- and functionality-oriented applications in electrochemical and battery-capacitor hybrid devices. The operating principles and types of dual-ion and whole-anion storage in electrochemical and hybrid capacitors are addressed along with the classification, thermodynamic and kinetic aspects, and associated interfaces of anion storage materials in various aqueous and non-aqueous electrolytes. The charge storage mechanism, structure-property correlation, and electrochemical features of anion storage materials are comprehensively discussed. The recent progress in emerging anion storage materials is also discussed, focusing on high-performance applications, such as dual-ion- and whole-anion-storing electrochemical capacitors in a symmetric or hybrid manner, and functional applications including micro- and flexible capacitors, desalination, and salinity cells. Finally, we present our perspective on the current impediments and future directions in this field.

A robust magnesiothermic reduction combined self-activation strategy towards highly-curved carbon nanosheets for advanced zinc-ion hybrid supercapacitors applications

Aqueous zinc-ion hybrid supercapacitors are considered to be a newly emerging electrochemical energy storage devices. However, the exploration and design of advanced cathode materials remain a huge challenge. Herein, we developed a versatile one-step magnesiothermic reduction and self-activation process for the synthesis of highly-curved carbon nanosheets (HCCNs) with hierarchical pore structures. In this process, low-molecular weight organic potassium salts (e.g. potassium bitartrate, potassium acetate, potassium oxalate, potassium formate, potassium oleate, potassium sorbate), which usually used as the chemical activating reagents, serve as the carbon source whereas the Mg power acts as the reducing agent. The resulting HCCNs possess hierarchical porosity and unique HCCN geometry which can afford abundant active sites for charge accumulation as well as the highly efficient ions diffusion kinetics. Because of the high ratio of surface-controlled capacitive contribution and high ions diffusion coefficient, the optimized sample can exhibit excellent charge storage performance with an impressive reversible capacity (200.2 mAh g^-1), excellent rate capability, and good cyclic stability. The excellent capacitive behaviors combined with the feasible synthetic procedure make the present synthetic protocol a promising choice towards well-designed nanocarbons for electrochemical energy storage applications.

Investigation of Voltage Range and Self-Discharge in Aqueous Zinc-Ion Hybrid Supercapacitors

Aqueous zinc-ion hybrid supercapacitors are a promising energy storage technology, owing to their high safety, low cost, and long-term stability. At present, however, there is a lack of understanding of the potential window and self-discharge of this aqueous energy storage technology. This study concerns a systematic investigation of the potential window of this device by cyclic voltammetry and galvanostatic charge-discharge. Hybrid supercapacitors based on commercial activated carbon (AC) demonstrate a wide and stable potential window (0.2 V to 1.8 V), high specific capacitances (308 F g-1 at 0.5 A g-1 and 110 F g-1 at 30 A g-1 ), good cycling stability (10000 cycles with 95.1 % capacitance retention), and a high energy density (104.8 Wh kg-1 at 383.5 W kg-1 ), based on the active materials. The mechanism involves simultaneous adsorption-desorption of ions on the AC cathode and zinc ion plating/stripping on the Zn anode. This work leads to better understanding of such devices and will aid future development of practical high-performance aqueous zinc-ion hybrid supercapacitors based on commercial carbon materials, thus accelerating the deployment of these hybrid supercapacitors and filling the gap between supercapacitors and batteries.

Identifying Heteroatomic and Defective Sites in Carbon with Dual-Ion Adsorption Capability for High Energy and Power Zinc Ion Capacitor

Aqueous zinc-based batteries (AZBs) attract tremendous attention due to the abundant and rechargeable zinc anode. Nonetheless, the requirement of high energy and power densities raises great challenge for the cathode development. Herein we construct an aqueous zinc ion capacitor possessing an unrivaled combination of high energy and power characteristics by employing a unique dual-ion adsorption mechanism in the cathode side. Through a templating/activating co-assisted carbonization procedure, a routine protein-rich biomass transforms into defect-rich carbon with immense surface area of 3657.5 m² g^-1 and electrochemically active heteroatom content of 8.0 at%. Comprehensive characterization and DFT calculations reveal that the obtained carbon cathode exhibits capacitive charge adsorptions toward both the cations and anions, which regularly occur at the specific sites of heteroatom moieties and lattice defects upon different depths of discharge/charge. The dual-ion adsorption mechanism endows the assembled cells with maximum capacity of 257 mAh g^-1 and retention of 72 mAh g^-1 at ultrahigh current density of 100 A g^-1 (400 C), corresponding to the outstanding energy and power of 168 Wh kg^-1 and 61,700 W kg^-1. Furthermore, practical battery configurations of solid-state pouch and cable-type cells display excellent reliability in electrochemistry as flexible and knittable power sources.

Current State and Future Prospects for Electrochemical Energy Storage and Conversion Systems

Electrochemical energy storage and conversion systems such as electrochemical capacitors, batteries and fuel cells are considered as the most important technologies proposing environmentally friendly and sustainable solutions to address rapidly growing global energy demands and environmental concerns. Their commercial applications individually or in combination of two or more devices are based on their distinguishing properties e.g., energy/power densities, cyclability and efficiencies. In this review article, we have discussed some of the major electrochemical energy storage and conversion systems and encapsulated their technological advancement in recent years. Fundamental working principles and material compositions of various components such as electrodes and electrolytes have also been discussed. Furthermore, future challenges and perspectives for the applications of these technologies are discussed.

Hollow Mesoporous Carbon Spheres for High Performance Symmetrical and Aqueous Zinc-Ion Hybrid Supercapacitor

Zinc-ion hybrid supercapacitors are a promising energy storage device as they simultaneously combine the high capacity of batteries and the high power of supercapacitors. However, the practical application of Zinc-ion hybrid supercapacitors is hindered by insufficient energy density and poor rate performance. In this study, a symmetrical zinc-ion hybrid supercapacitor device was constructed with hollow mesoporous-carbon nanospheres as electrode materials, and aqueous ZnSO₄ adopted as an electrolyte. Benefiting from the mesoporous structure and high specific area (800 m²/g) of the hollow carbon nanospheres, fast capacitor-type ion adsorption/de-adsorption on both the cathode and the anode can be achieved, as well as additional battery-type Zn/Zn²⁺ electroplating/stripping on the anode. This device thus demonstrates outstanding electrochemical performance, with high capacity (212.1 F/g at 0.2 A/g), a high energy density (75.4 Wh/kg at 0.16 kW/kg), a good rate performance (34.2 Wh/kg energy density maintained at a high power density of 16.0 kW/kg) and excellent cycling stability with 99.4% capacitance retention after 2,500 cycles at 2 A/g. The engineering of this new configuration provides an extremely safe, high-rate, and durable energy-storage device.

In Situ Two-Step Activation Strategy Boosting Hierarchical Porous Carbon Cathode for an Aqueous Zn-Based Hybrid Energy Storage Device with High Capacity and Ultra-Long Cycling Life

Aqueous Zn-based hybrid energy storage devices (HESDs) exhibit great potential for large-scale energy storage applications for the merits of environmental friendliness, low redox potential, and high theoretical capacity of Zn anode. However, they are still subjected to low specific capacities since adsorption-type cathodes (i.e., activated carbon, hard carbon) have limited capability to accommodate active ions. Herein, a hierarchical porous activated carbon cathode (HPAC) is prepared via an in situ two-step activation strategy, different from the typical one-step/postmortem activation of fully carbonized precursors. The strategy endows the HPAC with a high specific surface area and a large mesoporous volume, and thus provides abundant active sites and fast kinetics for accommodating active ions. Consequently, pairing the HPAC with Zn anode yields an aqueous Zn-based HESD, which delivers a high specific capacity of 231 mAh g^-1 at 0.5 A g^-1 and excellent rate performance with a retained capacity of 119 mAh g^-1 at 20 A g^-1 , the best result among previously reported lithium-free HESDs based on carbon cathodes. Further, the aqueous Zn-based HESD shows ultra-long cycling stability with a capacity retention of ≈70% after 18 000 cycles at 10 A g^-1 , indicating great potential for environmentally friendly, low-cost, and high-safety energy storage applications.