A novel ultrasensitive sandwich-type photoelectrochemical immunoassay for PSA detection based on dual inhibition effect of Au/MWCNTs nanohybrids on N-GQDs/CdS QDs dual sensitized urchin-like TiO2

Carbon-based photoelectrochemical sensors: recent developments and future prospects

Owing to the considerable potential of photoelectrochemical (PEC) sensors, they have gained significant attention in the analysis of biological, environmental, and food markers. However, the limited charge mass transfer efficiency and rapid recombination of electron hole pairs have become obstacles in the development of PEC sensors. In this case, considering the unique advantages of carbon-based materials, they can be used as photosensitizers, supporting materials and conductive substrates and coupled with semiconductors to prepare composite materials, solving the above problems. In addition, there are many types of carbon materials, which can have semiconductor properties and form heterojunctions after coupling with semiconductors, effectively promoting the separation of electron hole pairs. Herein, we aimed to provide a comprehensive analysis of reports on carbon-based PEC sensors by introducing their research and application status and discussing future development trends in this field. In particular, the types and performance improvement strategies of carbon-based electrodes and the working principles of carbon-based PEC sensors are explained. Furthermore, the applications of carbon-based photoelectric sensors in environmental monitoring, biomedicine, and food detection are highlighted. Finally, the current limitations in the research on carbon-based PEC sensors are emphasized and the need to enhance the sensitivity and selectivity through material modification, structural design, improved device performance, and other strategies are emphasized.

A sensitive label-free biosensor based on Ag2S-sensitived Bi2WO6/BiOBr heterojunction for photoelectrochemical immunoassay of prostate specific antigen

Prostate cancer is one of the most common cancers in the world, and its early diagnosis can effectively reduce mortality. A new label-free photoelectrochemical (PEC) immunosensor on the basis of Bi₂WO₆/BiOBr nanocomposite materials has been successfully prepared for the test of prostate-specific antigen (PSA) in human serum in this work. The Ag₂S-sensitized Bi₂WO₆/BiOBr heterojunction was used as a photosensitive material, which effectively improved the photocurrent response. On Bi₂WO₆/BiOBr surface, dopamine immobilized PSA antibody by self-polymerizing to form polydopamine membrane. Antigen and antibody are specifically combined to achieve quantitative detection of PSA according to the current changes at different concentrations of antigen. Under the optimal experimental conditions, the PEC immunosensor has an ideal linear relationship between 1 pg/mL - 50 ng/mL, and the detection limit is 0.084 pg/mL. In addition, the prepared immunosensor has good stability, reproducibility and selectivity, providing a new method for the detection of PSA in actual sample analysis.

Ultrathin Covalent Organic Framework Nanosheets/Ti3C2Tx-Based Photoelectrochemical Biosensor for Efficient Detection of Prostate-Specific Antigen

Designable and ultrathin covalent organic framework nanosheets (CONs) with good photoelectric activity are promising candidates for the construction of photoelectrochemical (PEC) biosensors for the detection of low-abundance biological substrates. However, achieving highly sensitive PEC properties by using emerging covalent organic framework nanosheets (CONs) remains a great challenge due to the polymeric nature and poor photoelectric activity of CONs. Herein, we report for the first time the preparation of novel composites and their PEC sensing properties by electrostatic self-assembly of ultrathin CONs (called TTPA-CONs) with Ti₃C₂T_x. The prepared TTPA-CONs/Ti₃C₂T_x composites can be used as photocathodes for PEC detection of prostate-specific antigen (PSA) with high sensitivity, low detection limit, and good stability. This work not only expands the application of CONs but also opens new avenues for the development of efficient PEC sensing platforms.

Sandwich-type electrochemical immunosensor based on nitrogen-doped porous carbon and nanoporous trimetallic nanozyme (PdAgCu) for determination of prostate specific antigen

A sandwich-type electrochemical immunosensor was designed for the ultrasensitive detection of prostate-specific antigen (PSA), using Au nanoparticles (Au NPs) modified nitrogen-doped porous carbon (NPC) as sensor platform and trimetallic PdAgCu mesoporous nanospheres (PdAgCu MNSs) as enzyme-mimicking labels. NPC was prepared by a facile one-step pyrolysis strategy of biomimetic phylloid zeolite imidazole framework (ZIF-L) nanosheets. Through this strategy, the graphitization of the microcrystalline structure enhanced the electrical conductivity, while its enlarged specific surface area and abundant pore volume can enrich H₂O₂ to improve the catalytic efficiency. Moreover, Au NPs were used to modify NPC without cross-linking agents to further optimize electron transport while capturing primary antibodies, improving stability and sensitivity of the immunosensor. PdAgCu MNSs with uniform size, cylindrical open mesoporous channels, and continuous crystal frame structure were self-assembling synthesized by electrostatic adsorption and ascorbic acid (AA) co-reduction with amphiphilic dioctadecyldimethylammonium chloride (DODAC) as surfactant-cum-micelle, whose unique structure maximizes the use of polyatoms to expose catalytic sites, exhibiting good biocompatibility and electrocatalytic ability. Under the optimal conditions, the immunosensor showed superior sensitivity, a wide dynamic detection range (10 fg mL^-1 ~ 100 ng mL^-1) and a low limit of detection (LOD, 3.29 fg mL^-1). This work provides a convenient strategy for the clinical detection of PSA.

Multiwalled Carbon Nanotubes as Nanomaterial Tool in the Management of Prostate Cancer: A Possible Nanoformulation Approach

Prostate cancer (PCa) is one of the leading diseases in men all over the world caused due to over-expression of prostate-specific membrane antigen (PSMA). Currently, the detection and targeting of PCa is one of the major challenges in the prostate gland. Therefore, Bruton tyrosine kinase inhibitor molecules like ibrutinib (Ibr) loaded with nanomaterials like multi-walled carbon nanotubes (MWCNTs), which has good physico-chemical properties may be the best regimen to treat PCa. In this strategy, the chemically modified MWCNTs have excellent 'Biosensing' properties makes it easy for detecting PCa without fluorescent agent and thus targets particular site of PCa. In the present study, Ibr/MWCNTs conjugated with T30 oligonucleotide may selectively target and inhibit PSMA thereby reduce the over-expression in PCa. Hence, the proposed formulation design can extensively reduce the dosage regimen without any toxic effect. Additionally, the present hypothesis also revealed the binding mode of Ibr in the catalytic pocket of PSMA by in silico method. Therefore, we presume that if this hypothesis proves correct, it becomes an additional novel tool and one of the conceivable therapeutic options in treating PCa.

Recent advances in nanomaterials for prostate cancer detection and diagnosis

Despite the significant progress in the discovery of biomarkers and the exploitation of technologies for prostate cancer (PCa) detection and diagnosis, the initial screening of these PCa-related biomarkers using current...

Biosensing strategies for diagnosis of prostate specific antigen

Almost from the time of its discovery, the prostate specific antigen (PSA) has been one of the most accurate and most extensively studied indicators of prostate cancer (PC). Because of advancements in biosensing systems and technology, PSA analysis methods have been substantially updated and enhanced as compared to their first instances. With the development of techniques in biosensor technology, the number of PSA biosensors that can be used in the biomedical sector is increasing year by year. Many different recognition elements and transducers have been used in the development of biosensor systems that exhibit high sensitivity, selectivity, and specificity. Here in this review, we provide a current overview of the different approaches to PSA detection.

Carbon-based aerogels for biomedical sensing: Advances toward designing the ideal sensor

Carbon based aerogels are special solid-state materials comprised of interconnected networks of 3D nanostructures with high amount of air-filled nanoporous. They expand the structural properties along with physicochemical characteristics of nanoscale construction blocks to macroscale, and incorporate distinctive attributes of aerogels, like large surface area, high porosity, and low density, with particular features of the different constituents. These features impart aerogels with rapid response signal, high selectivity, and ultra-sensitivity for sensing diverse targets in biomedical media. This has prompted researchers to develop a variety of aerogel-based sensors with encouraging achievements. Hence, this work outlines sensing applications of aerogel-based sensors with a comprehensive overview on the carbon aerogel hybrid materials and their analytical performances. Authors tried to list advantages and limitations of the developed approach and introduced more potent research for possible devices designing. We also point out some challenges and future perspectives related to the improvement of high-efficiency aerogel-based sensors.

Development of Electrochemical Aptasensor for Lung Cancer Diagnostics in Human Blood

We describe the preparation and characterization of an aptamer-based electrochemical sensor to lung cancer tumor markers in human blood. The highly reproducible aptamer sensing layer with a high density (up to 70% coverage) on the gold electrode was made. Electrochemical methods and confocal laser scanning microscopy were used to study the stability of the aptamer layer structure and binding ability. A new blocking agent, a thiolated oligonucleotide with an unrelated sequence, was applied to fill the aptamer layer’s defects. Electrochemical aptasensor signal processing was enhanced using deep learning and computer simulation of the experimental data array. It was found that the combinations (coupled and tripled) of cyclic voltammogram features allowed for distinguishing between the samples from lung cancer patients and healthy candidates with a mean accuracy of 0.73. The capacitive component from the non-Faradic electrochemical impedance spectroscopy data indicated the tumor marker’s presence in a sample. These findings allowed for the creation of highly informative aptasensors for early lung cancer diagnostics.

A label-free photoelectrochemical immunosensor for prostate specific antigen detection based on Ag2S sensitized Ag/AgBr/BiOBr heterojunction by in-situ growth method

Prostate cancer is one of the most common cancers in the world, and its early detection is vital to saving the lives of patients. In this research, a novel label-free photoelectrochemical immunosensor was designed for sensitive detection of prostate specific antigen (PSA). Ag₂S sensitized on Ag/AgBr/BiOBr heterojunction could effectively inhibit photogenic holes recombination and improve photocurrent response and sensitivity. Ascorbic acid was an effective electron donor, which can effectively eliminate photo-generated holes. The photocurrent reduced linearly with the logarithm of PSA concentration ranged from 0.001 to 50 ng·mL^-1 and the limit of detection was 0.25 pg·mL^-1. The designed sensor had the advantages of wide linear range, good stability, high reproducibility, and good selectivity. This study not only provided a method for efficient and sensitive detection of PSA, but also provided valuable reference ideas for the detection of other tumor markers.

Metal Nanoparticle and Quantum Dot Tags for Signal Amplification in Electrochemical Immunosensors for Biomarker Detection

With the increasing importance of healthcare and clinical diagnosis, as well as the growing demand for highly sensitive analytical instruments, immunosensors have received considerable attention. In this review, electrochemical immunosensor signal amplification strategies using metal nanoparticles (MNPs) and quantum dots (Qdots) as tags are overviewed, focusing on recent developments in the ultrasensitive detection of biomarkers. MNPs and Qdots can be used separately or in combination with other nanostructures, while performing the function of nanocarriers, electroactive labels, or catalysts. Thus, different functions of MNPs and Qdots as well as recent advances in electrochemical signal amplification are discussed. Additionally, the methods most often used for antibody immobilization on nanoparticles, immunoassay formats, and electrochemical methods for indirect biomarker detection are overviewed.

TiO2-sensitized double-shell ZnCdS hollow nanospheres for photoelectrochemical immunoassay of carcinoembryonic antigen coupled with hybridization chain reaction-dependent Cu2+ quenching

A novel photoelectrochemical immunosensor was constructed to monitor carcinoembryonic antigen (CEA) based on hybridization chain reaction (HCR)-mediated in situ generation of copper nanoparticles (Cu NPs) and subsequent Cu²⁺-dependent quenching reaction, in which titanium dioxide nanoparticles-sensitized double-shell zinc cadmium sulfide hollow nanospheres (TiO₂/DS-ZnCdS)-modified ITO electrode and anti-CEA antibody-modified 96-well plate served as biological recognition and signal detection platforms, respectively. The synergistic effect of TiO₂ NPs and DS-ZnCdS hollow nanospheres contributed to the improvement of photoelectric conversion efficiency, and HCR-mediated signal cascade benefited the enhancement of detection sensitivity. In the presence of CEA, biotin-labelled anti-CEA antibodies were immobilized onto anti-CEA antibody-modified 96-well plate, and triggered HCR process to form long double stranded DNA, which could adsorb a large number of Cu²⁺ ions and then in situ form Cu NPs on double stranded DNA template by a facile reduction reaction. After acid treatment, the dissolved Cu²⁺ ions could significantly reduce the photocurrent response due to the generation of Cu_xS. Under optimal conditions, the immunosensor exhibited a desirable liner range of 1 pg mL^-1 - 50 ng mL^-1 and a low detection limit of 0.1 pg mL^-1, as well as excellent selectivity and stability. Meanwhile, the recoveries of human serum sample analysis ranged from 96.8% to 103.6%, and the relative standard deviation was less than 7.40%, showing a good feasibility in early clinical diagnosis.

Enzyme-Free Electrochemical Nano-Immunosensor Based on Graphene Quantum Dots and Gold Nanoparticles for Cardiac Biomarker Determination

An ultrasensitive enzyme-free electrochemical nano-immunosensor based on a screen-printed gold electrode (SPGE) modified with graphene quantum dots (GQDs) and gold nanoparticles (AuNPs) was engineered to detect cardiac troponin-I (cTnI) for the early diagnosis of acute myocardial infarction (AMI). The GQDs and in-house synthesized AuNPs were implanted onto the SPGE and allowed for anti-cTnI immobilization prior to quantifying cTnI. The biomarker could be determined in a wide concentration range using square-wave voltammetry (SWV), cyclic voltammetry (CV), electron impedance spectroscopy (EIS) and amperometry. The analyses were performed in buffer, as well as in human serum, in the investigation ranges of 1–1000 and 10–1000 pg mL⁻¹, respectively. The detection time ranged from 10.5–13 min, depending on the electrochemical method employed. The detection limit was calculated as 0.1 and 0.5 pg mL⁻¹ for buffer and serum, respectively. The sensitivity of the immunosensor was found to be 6.81 µA cm⁻² pg mL⁻¹, whereas the binding affinity was determined to be <0.89 pM. The sensor showed high specificity for cTnI with slight responses for nonspecific biomolecules. Each step of the sensor fabrication was characterized using CV, SWV, EIS and atomic force microscopy (AFM). Moreover, AuNPs, GQDs and their nanocomposites were characterized by transmission electron microscopy (TEM) and scanning electron microscopy (SEM). This is the first immunosensor that represents the successful determination of an analyte using four different electrochemical techniques. Such a sensor could demonstrate a promising future for on-site detection of AMI with its sensitivity, cost-effectiveness, rapidity and specificity.

A label-free photoelectrochemical immunosensor for detection of the milk allergen β-lactoglobulin based on Ag2S -sensitized spindle-shaped BiVO4/BiOBr heterojunction by an in situ growth method

Food allergies have become a nonnegligible food safety issue, and milk allergies are one of the most common food allergies, that has attracted large consumer attention. In this work, a novel label-free photoelectrochemical (PEC) immunosensor for the detection of the allergen β-lactoglobulin (β-LG) in dairy products was designed that used the specific recognition of allergen β-LG and antibodies in dairy products in combination with biosensing technology. Here, Ag₂S-sensitized spindle-shaped BiVO₄/BiOBr heterojunction was fixed on the surface of the ITO electrode as an excellent photoactive substrate and effectively improved the photocurrent responses and sensitivity. Thioglycolic acid (TGA) was used as a linker to immobilize the β-LG antibody on the surface of the electrode. The photocurrent was detected at different antigen concentrations, which realized the quantitative testing of β-LG. Under the optimal experimental conditions, the PEC immunosensor proved an ideal linear relationship ranging from 10 pg/mL to 100 ng/mL, with a low detection limit of 3.7 pg/mL. The designed immunosensor showed good stability, a wide linear range, high sensitivity and good reproducibility and could be used for the detection of actual samples. The PEC immunosensor had a strong ability to specifically recognize β-LG, which was not affected by other proteins in the milk without pretreatment. Meanwhile, the developed immunosensor provided a promising PEC detection platform and reference idea for the detection of other proteins in milk.