Impedimetric aptasensing using a symmetric Randles circuit model

Measurement of Neuropeptide Y in Aptamer-Modified Planar Electrodes

Electrochemical impedance spectroscopy (EIS) is a powerful technique for studying the interaction at electrode/solution interfaces. The adoption of EIS for obtaining analytical signals in biosensors based on aptamers is gaining popularity because of its advantageous characteristics for molecular recognition. Neuropeptide Y (NPY), the most abundant neuropeptide in the body, plays a crucial role with its stress-relieving properties. Quantitative measurement of NPY is imperative for understanding its role in these and other biological processes. Although aptamer-modified electrodes for NPY detection using EIS present a promising alternative, the correlation between the data obtained and the adsorption process on the electrodes is not fully understood. Various studies utilize the change in charge transfer resistance when employing an active redox label. In contrast, label-free measurement relies on changes in capacitance. To address these challenges, we focused on the interaction between aptamer-modified planar electrodes and their target, NPY. We proposed utilizing -ω*Zimag as the analytical signal, which facilitated the analysis of the adsorption process using an analogous Langmuir isotherm equation. This approach differs from implantable microelectrodes, which adhere to the Freundlich adsorption isotherm. Notably, our method obviates the need for a redox label and enables the detection of NPY at concentrations as low as 20 pg/mL. This methodology demonstrated exceptional selectivity, exhibiting a signal difference of over 20-to-1 against potential interfering molecules.

Investigation of synthesized ethyl-(2-(5-arylidine-2,4-dioxothiazolidin-3-yl) acetyl) butanoate as an effective corrosion inhibitor for mild steel in 1 M HCl: A gravimetric, electrochemical, and spectroscopic study

The corrosion inhibition effects of five concentrations (5E-5 M to 9E-5 M) of ethyl-(2-(5-arylidine-2,4-dioxothiazolidin-3-yl) acetyl) butanoate, a novel thiazolidinedione derivative code named B1, were investigated on mild steel in 1 M HCl using gravimetric analysis, electrochemical analysis and Fourier transform infrared spectroscopy. After synthesis and purification, B1 was characterized using nuclear magnetic resonance spectroscopy. All gravimetric analysis experiments were carried out at four different temperatures: 303.15 K, 313.15 K, 323.15 K and 333.15 K, achieving a maximum percentage inhibition efficiency of 92% at 303.15 K. The maximum percentage inhibition efficiency obtained from electrochemical analysis, conducted at 303.15 K, was 83%. Thermodynamic parameters such as ΔG°_ads showed that B1 adsorbs onto the MS surface via a mixed type of action at lower temperatures, transitioning to exclusively chemisorption at higher temperatures.

Effect of Recombinant Antibodies and MIP Nanoparticles on the Electrical Behavior of Impedimetric Biorecognition Surfaces for SARS-CoV-2 Spike Glycoprotein: A Short Report

Electrochemical immunosensors are often described as innovative strategies to tackle urgent epidemiological needs, such as the detection of SARS-CoV-2 main biomarker, the spike glycoprotein. Nevertheless, there is a great variety of receptors, especially recombinant antibodies, that can be used to develop these biosensing platforms, and very few reports compare their suitability in analytical device design and their sensing performances. Therefore, this short report targeted a brief and straightforward investigation of the performance of different impedimetric biorecognition surfaces (BioS) for SARS-CoV-2, which were crafted from three commonly reported recombinant antibodies and molecularly-imprinted polymer (MIP) nanoparticles (nanoMIP). The selected NanoMIP were chosen due to their reported selectivity to the receptor binding domain (RBD) of SARS-CoV-2 spike glycoprotein. Results showed that the surface modification protocol based on MUDA and crosslinking with EDC/NHS was successful for the anchoring of each tested receptor, as the semicircle diameter of the Nyquist plots of EIS increased upon each modification, which suggests the increase of Rct due to the binding of dielectric materials on the conductive surface. Furthermore, the type of monoclonal antibody used to craft the BioS and the artificial receptors led to very distinct responses, being the RBD5305 and the NanoMIP-based BioS the ones that showcased the highest increment of signal in the conditions herein reported, which suggests their adequacy in the development of impedimetric immunosensors for SARS-CoV-2 spike glycoprotein.

Monitoring of Aflatoxin M1 in milk using a novel electrochemicalaptasensorbased on reduced graphene oxide and gold nanoparticles

Accurate and rapid detection of Aflatoxins as one of the most hazardous compounds in foodstuffs is very important. In this study, a label-free electrochemical aptasensor was developed to identify aflatoxin M1 using a reduced graphene oxide (rGO) and gold nanoparticles (AuNPs)-based pencil graphite electrode (PGE). The morphological characteristics of the electrode surface were investigated using SEM and rGO functional groups were confirmed by FTIR. Cyclic voltammetry (CV) and electrochemical impedance spectroscopy (EIS) techniques were used to characterize various stages of electrode modification. In order to optimize the impedimetric response of the aptasensor, aptamer immobilization time, aptamer concentration, and binding aflatoxin M1 with aptamer time were optimized. Under optimal conditions, the linear concentration range of 0.5-800 ng/L and limit of detection (LOD) of 0.3 ng/L were obtained for aflatoxin M1 by measuring the resistance charge transfer data. Finally, the fabricated aptasensor was successfully used to measure AFM1 compared to HPLC method.