Oxygen vacancies enriched Bi based catalysts for enhancing electrocatalytic CO2 reduction to formate

Bismuth-Based Electrocatalysts for Identical Value-Added Formic Acid Through Coupling CO2 Reduction and Methanol Oxidation

It is an effective way to reduce atmospheric CO2 via electrochemical CO2 reduction reaction (CO2RR), while the slow oxygen evolution reaction (OER) occurs at the anode with huge energy consumption. Herein, methanol oxidation reaction (MOR) is used to replace OER, coupling CO2RR to achieve co-production of formate. Through enhancing OCHO* adsorption by oxygen vacancies engineering and synergistic effect by heteroatom doping, Bi/Bi2O3 and Ni─Bi(OH)3 are synthesized for efficient production of formate via simultaneous CO2RR and methanol oxidation reaction (MOR), achieving that the coupling of CO2RR//MOR only required 7.26 kWh gformate -1 power input, much lower than that of CO2RR//OER (13.67 kWh gformate -1). Bi/Bi2O3 exhibits excellent electrocatalytic CO2RR performance, achieving FEformate >80% in a wide potential range from -0.7 to -1.2 V (vs RHE). For MOR, Ni─Bi(OH)3 exhibits efficient MOR catalytic performance with the FEformate >98% in the potential range of 1.35-1.6 V (vs RHE). Not only demonstrates the two-electrode systems exceptional stability, working continuously for over 250 h under a cell voltage of 3.0 V, but the cathode and anode can maintain a FE of over 80%. DFT calculation results reveal that the oxygen vacancies of Bi/Bi2O3 enhance the adsorption of OCHO* intermediate, and Ni─Bi(OH)3 reduce the energy barrier for the rate determining step, leading to high catalytic activity.

Favoring Product Desorption by a Tailored Electronic Environment of Oxygen Vacancies in SrTiO3 via Cr Doping for Enhanced and Selective Electrocatalytic CO2 to CO Conversion

The electrochemical CO₂ reduction reaction (ECO₂RR) into value-added products is crucial to address the herculean task of CO₂ mitigation. Several efforts are being made to develop active ECO₂RR catalysts, targeting enhanced CO₂ adsorption and activation. A rational design of ECO₂RR catalysts with a facile product desorption step is seldom reported. Herein, ensuing the Sabatier principle, we report a strategy for an enhanced ECO₂RR with a faradaic efficiency of 85% for CO production by targeting the product desorption step. The energy barrier for product desorption was lowered via a tailored electronic environment of oxygen vacancies (O_vac) in Cr-doped SrTiO₃. The substitutional doping of Cr³⁺ for Ti⁴⁺ into the SrTiO₃ lattice favors the generation of more O_vac and modifies the local electronic environment. Density functional theory analysis evinces the spontaneous dissociation of COOH^# intermediates over O_vac and lower CO intermediate binding on O_vac reducing the energy demand for CO release due to Cr doping.

Boosting CO2 Electroreduction on Bismuth Nanoplates with a Three-Dimensional Nitrogen-Doped Graphene Aerogel Matrix

Electrochemical CO₂ reduction reaction (CO₂RR), which uses renewable electricity to produce high-value-added chemicals, offers an alternative clean path to the carbon cycle. However, bismuth-based catalysts show great potential for the conversion of CO₂ and water to formate, but their overall efficiency is still hampered by the weak CO₂ adsorption, low electrical conductivity, and slow mass transfer of CO₂ molecules. Herein, we report that a rationally modulated nitrogen-doped graphene aerogel matrix (NGA) can significantly enhance the CO₂RR performance of bismuth nanoplates (BiNPs) by both modulating the electronic structure of bismuth and regulating the interface for chemical reaction and mass transfer environments. In particular, the NGA prepared by reducing graphene oxide (GO) with hydrazine hydrate (denoted as NGA_hdrz) exhibits significantly enhanced strong metal-support interaction (SMSI), increased specific surface area, strengthened CO₂ adsorption, and modulated wettability. As a result, the Bi/NGA_hdrz exhibits significantly boosted CO₂RR properties, with a Faradaic efficiency (FE) of 96.4% at a current density of 51.4 mA cm^-2 for formate evolution at a potential of -1.0 V versus reversible hydrogen electrode (vs RHE) in aqueous solution under ambient conditions.

Electronic effects promoted the catalytic activities of binuclear Co(II) complexes for visible-light-driven CO2 reduction in a water-containing system

Under the action of a catalyst, the photoinduced reduction of CO₂ to chemicals and fuels is one of the greenest and environment-friendly approaches for decreasing atmospheric CO₂ emissions. Since the environment was affected by the greenhouse effect, scientists have never stopped exploring efficient photoinduced CO₂ reduction systems, particularly the highly desired non-noble metal complexes. Most of the currently reported complexes based on non-noble metals exhibit low catalytic activity, selectivity, and stability in aqueous systems under the irradiation of visible light. Herein, we report a new binuclear cobalt complex [Co₂(L¹)(OAc)₂](OAc) (Co2L1, HL¹ = 2,6-bis((bis(pyridin-2-ylmethyl)amino)methyl)-4-methoxyphenol), which accelerates the visible-light-driven conversion of CO₂ to CO in acetonitrile/water (4/1, v/v) nearly 40% more than that for the previously reported [Co₂(L²)(OAc)₂](OAc) (Co2L2, HL² = 2, 6-bis((bis(pyridin-2-ylmethyl)amino)methyl)-4-(tert-butyl)phenol) by our research group. It has an excellent CO selectivity of 98%, and the TON_CO is as high as 5920. Experimental results and DFT calculations showed that the enhanced catalytic performance of Co2L1 is due to the electron-donating effect of a methoxy group (-OCH₃) in Co2L1 compared to a tertiary butyl group (-C(CH₃)₃) in Co2L2, which reduces the energy barrier of the rate-limiting CO₂ coordination step in the visible-light-driven CO₂ reduction process.

Defective Metal Oxides: Lessons from CO2 RR and Applications in NOx RR

Sluggish reaction kinetics and the undesired side reactions (hydrogen evolution reaction and self-reduction) are the main bottlenecks of electrochemical conversion reactions, such as the carbon dioxide and nitrate reduction reactions (CO₂ RR and NO₃ RR). To date, conventional strategies to overcome these challenges involve electronic structure modification and modulation of the charge-transfer behavior. Nonetheless, key aspects of surface modification, focused on boosting the intrinsic activity of active sites on the catalyst surface, are yet to be fully understood. Engingeering of oxygen vacancies (OVs) can tune surface/bulk electronic structure and improve surface active sites of electrocatalysts. The continuous breakthroughs and significant progress in the last decade position engineering of OVs as a potential technique for advancing electrocatalysis. Motivated by this, the state-of-the-art findings of the roles of OVs in both the CO₂ RR and the NO₃ RR are presented. The review starts with a description of approaches to constructing and techniques for characterizing OVs. This is followed by an overview of the mechanistic understanding of the CO₂ RR and a detailed discussion on the roles of OVs in the CO₂ RR. Then, insights into the NO₃ RR mechanism and the potential of OVs on NO₃ RR based on early findings are highlighted. Finally, the challenges in designing CO₂ RR/NO₃ RR electrocatalysts and perspectives in studying OV engineering are provided.

A rational design of functional porous frameworks for electrocatalytic CO2 reduction reaction

The electrocatalytic CO₂ reduction reaction (ECO₂RR) is considered one of the approaches with the most potential to achieve lower carbon emissions in the future, but a huge gap still exists between the current ECO₂RR technology and industrial applications. Therefore, the design and preparation of catalysts with satisfactory activity, selectivity and stability for the ECO₂RR have attracted extensive attention. As a classic type of functional porous framework, crystalline porous materials (e.g., metal organic frameworks (MOFs) and covalent organic frameworks (COFs)) and derived porous materials (e.g., MOF/COF composites and pyrolysates) have been regarded as superior catalysts for the ECO₂RR due to their advantages such as designable porosity, modifiable skeleton, flexible active site structure, regulable charge transfer pathway and controllable morphology. Meanwhile, with the rapid development of nano-characterization and theoretical calculation technologies, the structure-activity relationships of functional porous frameworks have been comprehensively considered, i.e., metallic element type, local coordination environment, and microstructure, corresponding to selectivity, activity and mass transfer efficiency for the ECO₂RR, respectively. In this review, the rational design strategy for functional porous frameworks is briefly but precisely generalized based on three key factors including metallic element type, local coordination environment, and microstructure. Then, details about the structure-activity relationships for functional porous frameworks are illustrated in the order of MOFs, COFs, composites and pyrolysates to analyze the effect of the above-mentioned three factors on their ECO₂RR performance. Finally, the challenges and perspectives of functional porous frameworks for the further development of the ECO₂RR are reasonably proposed, aiming to offer insights for future studies in this intriguing and significant research field.

Recent Progress in Surface-Defect Engineering Strategies for Electrocatalysts toward Electrochemical CO2 Reduction: A Review

Climate change, caused by greenhouse gas emissions, is one of the biggest threats to the world. As per the IEA report of 2021, global CO2 emissions amounted to around 31.5 Gt, which increased the atmospheric concentration of CO2 up to 412.5 ppm. Thus, there is an imperative demand for the development of new technologies to convert CO2 into value-added feedstock products such as alcohols, hydrocarbons, carbon monoxide, chemicals, and clean fuels. The intrinsic properties of the catalytic materials are the main factors influencing the efficiency of electrochemical CO2 reduction (CO2-RR) reactions. Additionally, the electroreduction of CO2 is mainly affected by poor selectivity and large overpotential requirements. However, these issues can be overcome by modifying heterogeneous electrocatalysts to control their morphology, size, crystal facets, grain boundaries, and surface defects/vacancies. This article reviews the recent progress in electrochemical CO2 reduction reactions accomplished by surface-defective electrocatalysts and identifies significant research gaps for designing highly efficient electrocatalytic materials.

Bionic Construction of Helical Bi2 O3 Microfibers for Highly Efficient CO2 Electroreduction

Helical Bi₂ O₃ microfibers (HBM) were prepared with the assistance of cotton template through a simple heating treatment in air. This twisted structure induced the lattice strains, enriched the oxygen vacancies of Bi₂ O₃ , and promoted the sufficient exposure of active sites simultaneously, thus performing outstanding activity and selectivity as catalyst for CO₂ electroreduction to formate. The faradaic efficiency (FE) of formate reached 100.4±1.9 % at -0.90 V vs. reversible hydrogen electrode (RHE) in an H-cell, and the partial current density was boosted to 226 mA cm^-2 with FE_formate of 96 % at -1.08 V vs. RHE in a flow cell. This work may open a new era for construction of metal oxide fibers by bionic strategy as high-performance electrocatalysts.

Highly Efficient Visible-Light-Driven CO2-to-CO Conversion by Coordinatively Unsaturated Co-Salen Complexes in a Water-Containing System

The development of cost-effective catalysts for CO₂ reduction is highly desired but remains a significant challenge. The unsaturated coordination metal center in a catalyst is favorable for the process of catalytic CO₂ reduction. In this paper, two asymmetric salen ligands were used to synthesize two coordinatively unsaturated Co-salen complexes. The two Co-salen complexes exhibit an unsaturated coordination pattern and display high activity and CO selectivity for visible-light-driven CO₂ reduction in a water-containing system. The photocatalytic performance of 2 is higher than that of 1 because the reduction potential of the catalytic Co^II center and the energy barrier of the catalytic transition states of 2 are lower than those of 1, with turnover numbers (TON_CO), turnover frequencies (TOF), and CO selectivity values of 8640, 0.24 s^-1, and 97% for 2, respectively. The photocatalytic reduction of CO₂ to CO for 2 is well supported by control experiments and density functional theory (DFT) calculations.

Oxygen Vacancy-Mediated CuCoFe/Tartrate-LDH Catalyst Directly Activates Oxygen to Produce Superoxide Radicals: Transformation of Active Species and Implication for Nitrobenzene Degradation

Oxygen vacancies play a vital role in the catalytic activity of layered double hydroxide (LDH) catalysts in wastewater treatment. However, the mechanism of oxygen vacancy-mediated LDH-activated oxygen to produce reactive oxygen species (ROS) still lacks a reasonable explanation. In this work, a tartrate-modified CuCoFe-LDH (CuCoFe/Tar-LDH) with abundant oxygen vacancies was designed, which can efficiently degrade nitrobenzene (NB) under room conditions. The technical energy consumption is 0.011 kW h L^-1. According to the characterization and calculation results, it is proposed that oxygen vacancies are formed because of the oxygen deficiency which is caused by the reduction of the energy between the metal ion and oxygen, and the metal ion transitions to a lower state. Compared with CuCoFe-LDH, the oxygen vacancy formation energy of CuCoFe/Tar-LDH decreased from 1.98 to 1.13 eV. The O₂ bond length adsorbed on the oxygen vacancy is 1.27 Å, close to the theoretical length of superoxide radicals (^•O₂^-) (1.26 Å). Radical trapping experiments and electron spin-resonance spectroscopy spectrum prove that ^•O₂^- is an important precursor of ^•OH. This work is dedicated to the in-depth exploration of the oxygen vacancy-mediated CuCoFe/Tar-LDH catalyst activation mechanism for molecular oxygen and the conversion relationship between ROS.

The Controllable Reconstruction of Bi-MOFs for Electrochemical CO2 Reduction through Electrolyte and Potential Mediation

Monitoring and controlling the reconstruction of materials under working conditions is crucial for the precise identification of active sites, elucidation of reaction mechanisms, and rational design of advanced catalysts. Herein, a Bi-based metal-organic framework (Bi-MOF) for electrochemical CO₂ reduction is selected as a case study. In situ Raman spectra combined with ex situ electron microscopy reveal that the intricate reconstruction of the Bi-MOF can be controlled using two steps: 1) electrolyte-mediated dissociation and conversion of Bi-MOF to Bi₂ O₂ CO₃ , and 2) potential-mediated reduction of Bi₂ O₂ CO₃ to Bi. The intentionally reconstructed Bi catalyst exhibits excellent activity, selectivity, and durability for formate production, and the unsaturated surface Bi atoms formed during reconstruction become the active sites. This work emphasizes the significant impact of pre-catalyst reconstruction under working conditions and provides insight into the design of highly active and stable electrocatalysts through the regulation of these processes.