Ball-milling-enhanced capacitive charge storage of activated graphene in aqueous, organic and ionic liquid electrolytes

Graphene Synthesis Techniques and Environmental Applications

Graphene is fundamentally a two-dimensional material with extraordinary optical, thermal, mechanical, and electrical characteristics. It has a versatile surface chemistry and large surface area. It is a carbon nanomaterial, which comprises sp² hybridized carbon atoms placed in a hexagonal lattice with one-atom thickness, giving it a two-dimensional structure. A large number of synthesis techniques including epitaxial growth, liquid phase exfoliation, electrochemical exfoliation, mechanical exfoliation, and chemical vapor deposition are used for the synthesis of graphene. Graphene prepared using different techniques can have a number of benefits and deficiencies depending on its application. This study provides a summary of graphene preparation techniques and critically assesses the use of graphene, its derivates, and composites in environmental applications. These applications include the use of graphene as membrane material for the detoxication and purification of water, active material for gas sensing, heavy metal ions detection, and CO₂ conversion. Furthermore, a trend analysis of both synthesis techniques and environmental applications of graphene has been performed by extracting and analyzing Scopus data from the past ten years. Finally, conclusions and outlook are provided to address the residual challenges related to the synthesis of the material and its use for environmental applications.

Graphene-Wine Waste Derived Carbon Composites for Advanced Supercapacitors

In this work, we investigate the potential of a novel carbon composite as an electrode for high-voltage electrochemical double-layer capacitors. The carbon composite was prepared following a sustainable synthetic approach that first involved the pyrolysis and then the activation of a precursor formed by winery wastes and graphene oxide. The composite prepared in this way shows a very high specific surface area (2467 m2·g−1) and an optimum pore size distribution for their use in supercapacitor electrodes. Graphene-biowaste-derived carbon composites are tested as active electrode materials in two different non-aqueous electrolytes, the ammonium salt-based conventional organic electrolyte and one imidazolium-based ionic liquid (1 M Et4NBF4/ACN and EMINTFSI). It was found that the presence of graphene oxide led to significant morphological and textural changes, which result in high-energy and power densities of ~27 W·h·kg−1 at 13,026 W·kg−1. Moreover, the devices assembled retain above 70% of the initial capacitance after 6000 cycles in the case of the organic electrolyte.

Sustainable Preparation of Nanoporous Carbons via Dry Ball Milling: Electrochemical Studies Using Nanocarbon Composite Electrodes and a Deep Eutectic Solvent as Electrolyte

The urgent need to reduce the consumption of fossil fuels drives the demand for renewable energy and has been attracting the interest of the scientific community to develop materials with improved energy storage properties. We propose a sustainable route to produce nanoporous carbon materials with a high-surface area from commercial graphite using a dry ball-milling procedure through a systematic study of the effects of dry ball-milling conditions on the properties of the modified carbons. The microstructure and morphology of the dry ball-milled graphite/carbon composites are characterized by BET (Brunauer-Emmett-Teller) analysis, SEM (scanning electron microscopy), ATR-FTIR (attenuated total reflectance-Fourier transform infrared spectroscopy) and Raman spectroscopy. As both the electrode and electrolyte play a significant role in any electrochemical energy storage device, the gravimetric capacitance was measured for ball-milled material/glassy carbon (GC) composite electrodes in contact with a deep eutectic solvent (DES) containing choline chloride and ethylene glycol as hydrogen bond donor (HBD) in a 1:2 molar ratio. Electrochemical stability was tracked by measuring charge/discharge curves. Carbons with different specific surface areas were tested and the relationship between the calculated capacitance and the surface treatment method was established. A five-fold increase in gravimetric capacitance, 25.27 F·g-1 (G40) against 5.45 F·g-1, was found for commercial graphene in contact with DES. Optimal milling time to achieve a higher surface area was also established.