One-pot microwave-assisted synthesis of porous reduced graphene oxide as an electrode material for high capacitance supercapacitor

Agricultural and industrial wastes applied on the high performance energy storage devices

Driven by population growth, the destruction of the environment and the energy demand continue to increase dramatically. This study uses garlic skin and carbon fiber from agricultural and industrial wastes to prepare energy storage devices. Carbon quantum dots (CQDs) were obtained from garlic skin using high-temperature pyrolysis. The specific capacitance of the gel electrolyte could be effectively increased with a small number of CQDs doping. A methylcellulose-based carbon fiber-electrode was prepared by grinding and depositing the industrial recycled carbon fiber onto a biodegradable methylcellulose substrate. The methylcellulose-based recycled carbon fiber-electrode has the highest specific capacitance, energy density, and power density, which are 155 F/g, 10 Wh/kg, and 4047 W/kg, respectively, at a scan rate of 0.02 V/s, and demonstrates excellent performance, such like high specific capacitance, low internal resistance as well as rapid charge and discharge characteristics, which may have potential to replace the expensive carbon nanotubes and graphenes. The electrodes were made from recycled carbon fiber, the gel electrolyte with garlic CQDs, and a separator assembled into a sandwich structure to form supercapacitors. The capacity retention rate of the supercapacitor still retained 96 % of its initial value after 2000 cycles of charge and discharge testing at a constant current of 0.20 mA. This demonstrates the supercapacitor prepared in this study with competitive power density, energy density, high rate capability, and excellent life cycle stability by combining the garlic skin and carbon fiber from agricultural and industrial wastes, highlighting the enormous potential of agricultural and industrial wastes for energy storage applications.

Microwave-Assisted Synthesis as a Promising Tool for the Preparation of Materials Containing Defective Carbon Nanostructures: Implications on Properties and Applications

In this review, we focus on a small section of the literature that deals with the materials containing pristine defective carbon nanostructures (CNs) and those incorporated into the larger systems containing carbon atoms, heteroatoms, and inorganic components.. Briefly, we discuss only those topics that focus on structural defects related to introducing perturbation into the surface topology of the ideal lattice structure. The disorder in the crystal structure may vary in character, size, and location, which significantly modifies the physical and chemical properties of CNs or their hybrid combination. We focus mainly on the method using microwave (MW) irradiation, which is a powerful tool for synthesizing and modifying carbon-based solid materials due to its simplicity, the possibility of conducting the reaction in solvents and solid phases, and the presence of components of different chemical natures. Herein, we will emphasize the advantages of synthesis using MW-assisted heating and indicate the influence of the structure of the obtained materials on their physical and chemical properties. It is the first review paper that comprehensively summarizes research in the context of using MW-assisted heating to modify the structure of CNs, paying attention to its remarkable universality and simplicity. In the final part, we emphasize the role of MW-assisted heating in creating defects in CNs and the implications in designing their properties and applications. The presented review is a valuable source summarizing the achievements of scientists in this area of research.

One-Step Synthesis of Fragment-Reduced Graphene Oxide as an Electrode Material for Supercapacitors

We herein report for the first time a simple environmentally friendly hydrothermal method for one-step synthesis of fragment-reduced graphene oxide (FrGO) under mild conditions without the addition of reducing agents, and we applied it as an electrode material for a supercapacitor. The characterization results show that the introduction of Al2O3 as a spacer and HCl as an etchant results in a macroporous/mesoporous structure, increases the fragmentation of the FrGO microtopography, shortens the electron/ion transport path, and increases the contact between the electrode material and the electrolyte. Compared to the traditional hydrothermal reduced graphene materials, FrGO shows a larger specific capacitance. The results indicate that suitable hydrothermal temperature and time can effectively promote the retention of more oxygen-containing functional groups on the graphene surface. The first-principles density functional theory (DFT) calculation results show that the electrostatic potential in carbonyl group graphene is more negative, favored by the H+ adsorption, and provides the system with a pseudocapacitive effect. Under optimized conditions, FrGO (1:4, 180 °C, 3 h) exhibits 417 F/g at 1 A/g with an outstanding capacitance retention of 78.51% at 50 A/g and exhibits remarkable stability over 20 000 charge/discharge cycles. The proposed FrGO-based synthesis method can be used to guide the development of electrode materials for various supercapacitor devices.

Dynamics of reduced graphene oxide: synthesis and structural models

Technological advancements are leading to an upsurge in demand for functional materials that satisfy several of humankind's needs. In addition to this, the current global drive is to develop materials with high efficacy in intended applications whilst practising green chemistry principles to ensure sustainability. Carbon-based materials, such as reduced graphene oxide (RGO), in particular, can possibly meet this criterion because they can be derived from waste biomass (a renewable material), possibly synthesised at low temperatures without the use of hazardous chemicals, and are biodegradable (owing to their organic nature), among other characteristics. Additionally, RGO as a carbon-based material is gaining momentum in several applications due to its lightweight, nontoxicity, excellent flexibility, tuneable band gap (from reduction), higher electrical conductivity (relative to graphene oxide, GO), low cost (owing to the natural abundance of carbon), and potentially facile and scalable synthesis protocols. Despite these attributes, the possible structures of RGO are still numerous with notable critical variations and the synthesis procedures have been dynamic. Herein, we summarize the highlights from the historical breakthroughs in understanding the structure of RGO (from the perspective of GO) and the recent state-of-the-art synthesis protocols, covering the period from 2020 to 2023. These are key aspects in the realisation of the full potential of RGO materials through the tailoring of physicochemical properties and reproducibility. The reviewed work highlights the merits and prospects of the physicochemical properties of RGO toward achieving sustainable, environmentally friendly, low-cost, and high-performing materials at a large scale for use in functional devices/processes to pave the way for commercialisation. This can drive the sustainability and commercial viability aspects of RGO as a material.

Investigation on the role of graphene-based composites for in photocatalytic degradation of phenol-based compounds in wastewater: a review

The ineptitude of conventional water management systems to eradicate noxious compounds leads to the development of advanced treatment systems. The disclosure of graphene-based photocatalytic degradation for the eradication of phenolic compounds has become the "apple of the eye" for many researchers. This review article describes the advanced research progress during the period of 2008-2021 in graphene-based nanocomposites and discusses their different synthesis methods. We will also talk about the applications of nanocomposite in water splitting, dye degradation, solar fuel generations, and organic transformations. Multicomponent heterojunction structure, co-catalyst cohering, and noble metal coupling have been inspected to enhance the photocatalytic performance of graphene-based composite by increasing charge separation and stability. The photocatalytic system's remarkable stability has been described in terms of facile recyclability. The adsorption ability of phenolic compounds has been addressed in the form of Langmuir and Freundlich adsorption isotherm with various factors (pH, concentration, the intensity of light, the effect of catalyst, the effect of time, etc.). The purpose of this review is to survey mechanisms and processes that enlist graphene-based composite in terms of efficacy and dose of catalyst required to attain 99% degradation. Nanoparticles may cause toxicity and a pretext for their toxicity has been mentioned. Finally, it is anticipated that this article could allocate consequential knowledge to fabricating graphene-based composites that are in crucial demand of being discussed in future research.

SnS2nanosheet arrays anchoring on functionalized carbon cloth for quasi-solid-state flexible supercapacitor with satisfactory electrochemical performance and mechanical stability

Increasing requirements for wearable devices stimulate the development of flexible energy storage components. Herein, a flexible integrated electrode consisting of SnS₂nanosheet arraysin situanchored on the functionalized carbon cloth was prepared via a facile one-step hydrothermal method. Through pretreatment of carbon cloth, rough morphology is appeared on the surface of carbon fiber, which is conducive to optimizing the accessible load of SnS₂. The SnS₂nanosheet arrays and the carbon fiber as conductive skeleton cooperate with each other to provide a highly open surface, leading to the enhancement in capacitance (194.4 mF cm^-2) and the outstanding retention after long-term service (86.5% after 10 000 cycles). A quasi-solid-state asymmetric flexible supercapacitor was assembled to evaluate the practical application under various conditions, suggesting satisfactory electrochemical performance as a maximum energy density of 10.95μWh cm^-2at the power density of 4.75 mW cm^-2and mechanical stability under actual conditions.