Characterizing honey bee exposure and effects from pesticides for chemical prioritization and life cycle assessment

Sublethal acetamiprid exposure induces immunity, suppresses pathways linked to juvenile hormone synthesis in queens and affects cycle-related signaling in emerging bees

Acetamiprid is the only neonicotinoid registered in the European Union because the risks of neonicotinoids to honey bees and other pollinators are strictly regulated. Herein, we orally exposed honey bee colonies to sublethal concentrations of acetamiprid (20 μg/L) under isolated conditions. After one month of continuous exposure, the emerging bees and queens were collected and analyzed via high-throughput label-free quantitative proteomics using a data-independent acquisition strategy. Six and 34 significantly differentially expressed proteins (DEPs) were identified in the emerging bees and queens, respectively. Mrjp3 was the only DEP found in both sample types/castes, and its opposite regulation illustrated a differential response. The DEPs in the emerging bees (H/ACA RNP, Rap1GAP, Mrjp3, and JHE) suggested that sublethal exposure to acetamiprid affected cell cycle-related signaling, which may affect the life history of workers in the colony. The DEPs with increased levels in queens, such as Mrjps 1-4 and 6-7, hymenoptaecin, and apidaecin 22, indicated an activated immune response. Additionally, the level of farnesyl pyrophosphate synthase (FPPS), which is essential for the mevalonate pathway and juvenile hormone biosynthesis, was significantly decreased in queens. The impaired utilization of juvenile hormone in queens supported the identification of additional DEPs. Furthermore, the proteome changes suggested the existence of increased neonicotinoid detoxification by UDP-glucuronosyltransferase and increased amino acid metabolism. The results suggest that the continuous exposure of bee colonies to acetamiprid at low doses (nanograms per gram in feed) may pose a threat to the colonies. The different exposure routes and durations for the emerging bees and queens in our experiment must be considered, i.e., the emerging bees were exposed as larvae via feeding royal jelly and beebread provided by workers (nurse bees), whereas the queens were fed royal jelly throughout the experiment. The biological consequences of the proteomic changes resulting from sublethal/chronic exposure require future determination.

Determination of pesticide residue in marginal lagoons of natural parks in Brazil using an improved calibrate passive sampler

Passive sampling is a sensitive and efficient method for analyzing pesticides in water. This article describes a hollow fiber liquid-phase microextraction (HF-LPME) device that was improved using polypropylene membranes grafted with nanocellulose for the passive sampling of pesticides in water. A comprehensive gas chromatography time-of-flight mass spectrometry (GCxGC/Q-TOFMS) system was used to separate, identify, and quantify pesticides. The sampling rates of 38 moderately hydrophobic to hydrophobic agricultural pesticides (2.18 < log Kow < 6.89) from different chemical classes, including the main triazine, organochlorine and organophosphate compounds, were calculated. A calibration process was applied to evaluate the role of flow velocity and select potential candidates for a possible performance reference compound (PRC). Sampling rates varied between 0.17 mL d-1 and 23.15 mL d-1. The accumulation curves identified linear periods ranging from 3 to 18 days. The new passive sampler device was applied for 8 days in rivers and marginal lagoons of natural parks of the São Francisco basin in Minas Gerais, Brazil and identified 10 target pesticides. Furthermore, 10 non-targeted pesticides were detected by the GCxGC/Q-TOFMS method.

Pesticide mixtures detected in crop and non-target wild plant pollen and nectar

Cultivation of mass flowering entomophilous crops benefits from the presence of managed and wild pollinators, who visit flowers to forage on pollen and nectar. However, management of these crops typically includes application of pesticides, the presence of which may pose a hazard for pollinators foraging in an agricultural environment. To determine the levels of potential exposure to pesticides, their presence and concentration in pollen and nectar need assessing, both within and beyond the target crop plants. We selected ten pesticide compounds and one metabolite and analysed their occurrence in a crop (Brassica napus) and a wild plant (Rubus fruticosus agg.), which was flowering in field edges. Nectar and pollen from both plants were collected from five spring and five winter sown B. napus fields in Ireland, and were tested for pesticide residues, using QuEChERS and Liquid Chromatography tandem mass spectrometry (LC-MS/MS). Pesticide residues were detected in plant pollen and nectar of both plants. Most detections were from fields with no recorded application of the respective compounds in that year, but higher concentrations were observed in recently treated fields. Overall, more residues were detected in B. napus pollen and nectar than in the wild plant, and B. napus pollen had the highest mean concentration of residues. All matrices were contaminated with at least three compounds, and the most frequently detected compounds were fungicides. The most common compound mixture was comprised of the fungicides azoxystrobin, boscalid, and the neonicotinoid insecticide clothianidin, which was not recently applied on the fields. Our results indicate that persistent compounds like the neonicotinoids, should be continuously monitored for their presence and fate in the field environment. The toxicological evaluation of the compound mixtures identified in the present study should be performed, to determine their impacts on foraging insects that may be exposed to them.

Evaluating the Impact of Commonly Used Pesticides on Honeybees (Apis mellifera) in North Gonder of Amhara Region, Ethiopia

Global honeybee losses and colony decline are becoming continuous threat to the apicultural industry, as well as, for food security and environmental stability. Although the putative causes are still unclear, extensive exposure of bees to pesticides could be the possible factor for worldwide colony losses. This study was aimed at evaluating the impact of nine commonly used pesticide incidents on adult worker honeybees (A. mellifera) under the laboratory condition, in North Gonder of Amhara region, Ethiopia. Feeding test, contact test, and fumigation tests were carried out for each pesticide following the standard procedures, and each pesticide toxicity was compared to the standard toxic chemical, dimethoate 40% EC (positive control), and to 50% honey solution (negative control). The results revealed that all the tested pesticides caused significant deaths of the experimental bees ( $P<0.05$ ) in all the tests when compared to the negative control. Diazinon 60% EC, endosulfan 35% EC, and malathion 50% EC were appeared highly toxic causing 100% mortality of bees, while chlorsulfuron 75% WG killed 90% of the experimental bees as tested via feeding. On the other hand, agro-2, 4-D and its mixture with glycel 41% EC are moderately toxic, and mancozeb 80% WP and glycel 41% EC were slightly toxic to honeybees as compared to the positive control (dimethoate 40% EC). Suddenly, diazinon 60% EC and malathion 50% EC triggered 100% mortality of bees, while endosulfan 35% EC and chlorsulfuron 75% WG caused 63.63% and 90.82% of bee mortality, respectively, when evaluated via contact test. The fumigation test also showed that chlorsulfuron 75% WG, diazinon 60% EC, and endosulfan 35% EC caused 100%, 86.7%, and 65.6% mortality rate of bees. Our result also highlighted that tested LD50 of all pesticide incidents were significantly lower than the manufacturer-based LD50. This shows that local honeybees A. m. jemenetica are extremely sensitive to commonly used agricultural pesticides, which may affect the colony level due to the intensive application of these pesticides in Ethiopia.

Greenhouse Gas (GHG) Emissions from Honey Production: Two-Year Survey in Italian Beekeeping Farms

The objective of this study was to quantify the climate change (CC) impact of the honey supply chain in different beekeeping systems and farms, over two consecutive years. The CC impact category is quantified as kg CO₂ equivalent and it evaluates the GHG emissions, mainly CO₂, N₂O, and CH₄. The results ranged from 0.44 to 3.18 (p = 0.039) kg CO₂e/kg honey with higher values in 2021 than 2020. The main contributors to climate change of the honey supply chain are represented by transport and supplemental feeding inputs. The beekeeping system (migratory or stationary) influenced CC: the contribution to CC for stationary farms was estimated at 0.58 kg CO₂e/kg honey and 2.48 for migratory ones (p < 0.001). Given the close connection between honey yield and LCA results due to the unit of measurement of impact, i.e., kg of honey produced, an index was developed (wildflower honey climate index) as a simple benchmark tool for prediction of honey yield in the survey context. Using the data from the present study, we found that the index is positively related to honey yield (r = 0.504; p < 0.05) but negatively related to supplemental feeding (r = -0.918; p < 0.01) and overall carbon footprint (r = -0.657; p < 0.05). Further studies are needed to better explain the effects of weather on honey production, as well as environmental impact.

The role of AccCDK20 and AccCDKN1 from Apis cerana cerana in development and response to pesticide and heavy metal toxicity

Apis cerana cerana is a native bee species in China and plays a key role in agricultural production and ecological balance. However, the growth and development of Apis cerana cerana has not been smooth, and pesticide and heavy metal stress are key factors that have forced a dramatic decline in population size. This study was performed with the objective of investigating the role of AccCDK20 and AccCDKN1 in honey bee resistance to pesticide and heavy metal stress. RT-qPCR analysis revealed that AccCDK20 transcript levels were highest in brown-eyed pupae and AccCDKN1 transcript levels were highest in 1-day-old worker bees. In different tissues and body parts of adult bees, AccCDK20 transcript levels were highest in the head, and AccCDKN1 transcript levels were highest in the thorax. It was further observed that environmental stress can affect the transcript levels of the AccCDK20 and AccCDKN1 genes. Silencing of the AccCDK20 and AccCDKN1 genes resulted in altered activities of antioxidant-related genes and antioxidant-related enzymes. AccCDK20 and AccCDKN1 transcript levels were upregulated under glyphosate stress, and silencing of the genes resulted in reduced resistance to glyphosate and greatly increased mortality in Apis cerana cerana. In addition, gene function was verified by in vitro repression assays. Overexpression of the AccCDK20 and AccCDKN1 proteins in E. coli cells increased the resistance to ROS damage induced by CHP. In conclusion, AccCDK20 and AccCDKN1 play an indispensable role in honey bee resistance to pesticide and heavy metal stress.

Joint toxic effects of thiamethoxam and flusilazole on the adult worker honey bees (Apis mellifera L.)

Insect pollinators are routinely exposed to a complex mixture of many pesticides. However, traditional environmental risk assessment is only carried out based on ecotoxicological data of single substances. In this context, we aimed to explore the potential effects when worker honey bees (Apis mellifera L.) were simultaneously challenged by thiamethoxam (TMX) and flusilazole (FSZ). Results displayed that TMX possessed higher toxicity to A. mellifera (96-h LC₅₀ value of 0.11 mg a. i. L^-1) than FSZ (96-h LC₅₀ value of 738 mg a. i. L^-1). Furthermore, the mixture of TMX and FSZ exhibited an acute synergistic impact on the pollinators. Meanwhile, the activities of SOD, caspase 3, caspase 9, and PPO, as well as the expressions of six genes (abaecin, dorsal-2, defensin-2, vtg, caspase-1, and CYP6AS14) associated with oxidative stress, immune response, lifespan, cell apoptosis, and detoxification metabolism were noteworthily varied in the individual and mixture challenges than at the baseline level. These data revealed that it is imminently essential to investigate the combined toxicity of pesticides since the toxicity evaluation from individual compounds toward honey bees may underestimate the toxicity in realistic conditions. Overall, the present results could help understand the potential contribution of pesticide mixtures to the decline of bee populations.

Pesticides in honey: bibliographic and bibliometric analysis towards matrix quality for consumption

Abstract Honey is a matrix noted for its wide consumption as a sweetener and its anti-inflammatory, antioxidant, and antimicrobial properties; however, its physicochemical quality can be compromised by the presence of toxicants such as pesticides. This review aims to gather recent information on pesticides in honey from the approach to their detection, understanding, and adverse effects on human health. A bibliographic and bibliometric analysis was carried out in academic databases limited to the last five and thirty years, respectively, comprising the keywords “honey”, “pesticides” and their types of pesticides or the agrochemical compound directly. It was found that there are about 30 pesticides detected in honey, in which organochlorine, organophosphate, and neonicotinoid compounds stood out for their concentrations concerning Maximum Residue Levels (MRL). Their physicochemical alteration was not well explored beyond slight variations in brightness and manganese concentration, and its consumption may have repercussions on human reproductive health. It was also determined that there was limited development on the scientific subject seeing that it is important to explore and investigate more on the issue due to the great impact of honey as a product of high consumption at a global level.

Ecotoxicity characterization of chemicals: Global recommendations and implementation in USEtox

Chemicals emitted to the environment affect ecosystem health from local to global scale, and reducing chemical impacts has become an important element of European and global sustainability efforts. The present work advances ecotoxicity characterization of chemicals in life cycle impact assessment by proposing recommendations resulting from international expert workshops and work conducted under the umbrella of the UNEP-SETAC Life Cycle Initiative in the GLAM project (Global guidance on environmental life cycle impact assessment indicators). We include specific recommendations for broadening the assessment scope through proposing to introduce additional environmental compartments beyond freshwater and related ecotoxicity indicators, as well as for adapting the ecotoxicity effect modelling approach to better reflect environmentally relevant exposure levels and including to a larger extent chronic test data. As result, we (1) propose a consistent mathematical framework for calculating freshwater ecotoxicity characterization factors and their underlying fate, exposure and effect parameters; (2) implement the framework into the USEtox scientific consensus model; (3) calculate characterization factors for chemicals reported in an inventory of a life cycle assessment case study on rice production and consumption; and (4) investigate the influence of effect data selection criteria on resulting indicator scores. Our results highlight the need for careful interpretation of life cycle assessment impact scores in light of robustness of underlying species sensitivity distributions. Next steps are to apply the recommended characterization framework in additional case studies, and to adapt it to soil, sediment and the marine environment. Our framework is applicable for evaluating chemicals in life cycle assessment, chemical and environmental footprinting, chemical substitution, risk screening, chemical prioritization, and comparison with environmental sustainability targets.

Toxicological evaluation of different pesticides in Tetragonisca angustula Latreille (Hymenoptera, Apidae)

The stingless bee Tetragonisca angustula is an important pollinator of different agricultural and native crops. This study evaluated changes in the relative activity of esterases and critical electrolyte concentration in brain cells after exposure to pesticides malathion and thiamethoxam. Lethal concentration 50% showed greater toxicity of thiamethoxam in relation to malathion. Esterases EST-3 and EST-4 (carboxylesterase) were partially inhibited after contamination by contact and ingestion of malathion and contamination by contact with thiamethoxam, suggesting participation of these esterases in the metabolization of these compounds. The lowest critical electrolyte concentration (CEC) was found after contamination by malathion ingestion (0.15 M), indicating changes in gene expression. The alterations observed in the intensity of EST-3 and EST-4 and the chromatin structure indicate that pesticides can act in gene expression and be used as biomarkers of contaminant residues. Furthermore, knowing the susceptibility of T. angustula bees to pesticides, it would be possible to use this species for biomonitoring environmental quality in preserved areas and agroecosystems.

Monitoring the effects of field exposure of acetamiprid to honey bee colonies in Eucalyptus monoculture plantations

Eucalyptus plantations occupy 26 % of Portuguese forested areas. Its flowers constitute important sources for bees and beekeepers take advantage of this and keep their honey bee colonies within or near the plantations for honey production. Nonetheless, these plantations are susceptible to pests, such as the eucalyptus weevil Gonipterus platensis. To control this weevil, some plantations must be treated with pesticides, which might harm non-target organisms. This study aimed to perform a multifactorial assessment of the health status and development of Apis mellifera iberiensis colonies in two similar landscape windows dominated by Eucalyptus globulus plantations - one used as control and the other with insecticide treatment. In each of the two selected areas, an apiary with five hives was installed and monitored before and after a single application of the insecticide acetamiprid (40 g a.i./ha). Colony health and development, resources use, and pesticide residues accumulation were measured. The results showed that the application of acetamiprid in this area did not alter the health status and development of the colonies. This can be explained by the low levels of residues of acetamiprid detected only in pollen and bee bread samples, ~52 fold lower than the sublethal effect threshold. This could be attributed to the low offer of resources during and after the application event and within the application area, with the consequent foraging outside the sprayed area during that period. Since exposure to pesticides in such complex landscapes seems to be dependent on the spatial and temporal distribution of resources, we highlight some key monitoring parameters and tools that are able to provide reliable information on colony development and use of resources. These tools can be easily applied and can provide a better decision-taking of pesticide application in intensive production systems to decrease the risk of exposure for honey bees.

Integrating Dietary Impacts in Food Life Cycle Assessment

Food production and food consumption have been too long studied separately. This paper therefore reviews progresses in assessment methods and identifies how nutrition effects on human health and environmental impacts of the entire food production and consumption can and should be consistently and systematically assessed, on a life cycle-based and a health-based perspective. Main observations include: (a) The strong activity in the Life Cycle Assessment (LCA) of a large range of agriculture production, covering beyond carbon footprint the biodiversity and health impacts of land, water, fertilizers, and pesticide use. (b) The multi-functionality of all foods and the need to compare a wide range of possible alternative including comparing serving size, meal alternatives and diets. (c) The availability of epidemiological dietary risk factors expressed in DALYs, enabling the creation of an additional LCA nutritional impact category and providing much broader flexibility in the choice of the functional unit and the kind of valid comparison LCA can address. (d) The need to use Big Data and machine learning method to better understand interactions and propose healthy and sustainable food baskets. As illustrated by the fruit yogurt example, dietary impacts on human health often dominate the life cycle impacts on human health and it is strongly recommended to consider them in the life cycle inventory and impact assessment of all commodities and foods that will eventually be consumed.

A critical review of effect modeling for ecological risk assessment of plant protection products

A wide diversity of plant protection products (PPP) is used for crop protection leading to the contamination of soil, water, and air, which can have ecotoxicological impacts on living organisms. It is inconceivable to study the effects of each compound on each species from each compartment, experimental studies being time consuming and cost prohibitive, and animal testing having to be avoided. Therefore, numerous models are developed to assess PPP ecotoxicological effects. Our objective was to provide an overview of the modeling approaches enabling the assessment of PPP effects (including biopesticides) on the biota. Six categories of models were inventoried: (Q)SAR, DR and TKTD, population, multi-species, landscape, and mixture models. They were developed for various species (terrestrial and aquatic vertebrates and invertebrates, primary producers, micro-organisms) belonging to diverse environmental compartments, to address different goals (e.g., species sensitivity or PPP bioaccumulation assessment, ecosystem services protection). Among them, mechanistic models are increasingly recognized by EFSA for PPP regulatory risk assessment but, to date, remain not considered in notified guidance documents. The strengths and limits of the reviewed models are discussed together with improvement avenues (multigenerational effects, multiple biotic and abiotic stressors). This review also underlines a lack of model testing by means of field data and of sensitivity and uncertainty analyses. Accurate and robust modeling of PPP effects and other stressors on living organisms, from their application in the field to their functional consequences on the ecosystems at different scales of time and space, would help going toward a more sustainable management of the environment. Graphical Abstract Combination of the keyword lists composing the first bibliographic query. Columns were joined together with the logical operator AND. All keyword lists are available in Supplementary Information at https://doi.org/10.5281/zenodo.5775038 (Larras et al. 2021).

What can we learn from commercial insecticides? Efficacy, toxicity, environmental impacts, and future developments

Worldwide pesticide usage was estimated in up to 3.5 million tons in 2020. The number of approved products varies among different countries, however, in Brazil, there are nearly 5000 of such products available. Among them, insecticides correspond to a group of mounting importance for controlling crop pests and disease-associated vectors in public health. Unfortunately, resistance to commercially approved insecticides is commonly observed, limiting the use of these products. Thus, the search for more effective and environmentally friendly products is both a challenge and a necessity since several insecticides are no longer allowed in many countries. In this review, we discuss the historical strategies used in the development of modern insecticides, including chemical structure alterations, mechanism of action and their impact on insecticidal activity. The environmental impact of each pesticide class is also discussed, with persistence data and activity on non-target organisms, along with the human toxicological effect. By tracing the historical route of discovery and development of blockbuster pesticides like DDT, pyrethroids and organophosphates, we also aim to categorize and relate the successful chemical alterations and novel pesticide development strategies that resulted in safer alternatives. A brief discussion on the Brazilian registration procedure and a perspective of insecticides currently approved in the country was also included.

Global Warming and Toxicity Impacts: Peanuts in Georgia, USA Using Life Cycle Assessment

Fertilizers and pesticides have been widely used in agriculture production, causing polluted soil, water, and atmosphere. This study aims to quantify air emissions from pesticides and fertilizers applied for peanut production in Georgia during selected years (1991, 1999, 2004, 2013, and 2018). Specifically, the oral and dermal potential impacts from pesticide emissions and the global warming potential (GWP) impact from fertilizers to air were investigated. This study followed the ISO 14040 series standards for life cycle assessment (LCA) methodology to assess six active ingredients (AIs) (2,4-DB, Bentazon, Chlorothalonil, Ethalfluralin, Paraquat, and Pendimethalin) and one greenhouse gas (nitrous oxide N2O). Their physical and chemical characteristics and the temporal scales greatly influenced the oral and dermal toxicity impacts. According to the low values obtained for Henry’s law (KH) and vapor pressure (VP), 2,4-dichlorophenoxy butanoic (DB), Pendimethalin, and Chlorothalonil have a higher impact on the continental air scale. The effect factor (EF) from oral exposure was higher in 2,4-DB, Bentazon, and Pendimethalin than dermal exposure, according to the relatively low lethal dose (LD50) for oral exposure, while the EF of Ethalfluralin and Chlorothalonil was the same for oral and dermal exposure according to their similar LD50.

Towards a comprehensive sustainability methodology to assess anthropogenic impacts on ecosystems: Review of the integration of Life Cycle Assessment, Environmental Risk Assessment and Ecosystem Services Assessment

Nowadays, a variety of methodologies are available to assess local, regional and global impacts of human activities on ecosystems, which include Life Cycle Assessment (LCA), Environmental Risk Assessment (ERA) and Ecosystem Services Assessment (ESA). However, none can individually assess both the positive and negative impacts of human activities at different geographical scales in a comprehensive manner. In order to overcome the shortcomings of each methodology and develop more holistic assessments, the integration of these methodologies is essential. Several studies have attempted to integrate these methodologies either conceptually or through applied case studies. To understand why, how and to what extent these methodologies have been integrated, a total of 110 relevant publications were reviewed. The analysis of the case studies showed that the integration can occur at different positions along the cause-effect chain and from this, a classification scheme was proposed to characterize the different integration approaches. Three categories of integration are distinguished: post-analysis, integration through the combination of results, and integration through the complementation of a driving method. The literature review highlights that the most recurrent type of integration is the latter. While the integration through the complementation of a driving method is more realistic and accurate compared to the other two categories, its development is more complex and a higher data requirement could be needed. In addition to this, there is always the risk of double-counting for all the approaches. None of the integration approaches can be categorized as a full integration, but this is not necessarily needed to have a comprehensive assessment. The most essential aspect is to select the appropriate components from each methodology that can cover both the environmental and socioeconomic costs and benefits of human activities on the ecosystems.

Analysis of honey bee exposure to multiple pesticide residues in the hive environment

Since the loss of honeybees in hives could have a greater impact on colony health than those of their foraging bees, it is imperative to know beehives' pesticide exposure via oral ingestion of contaminated in-hive matrices. Here, a 4-year monitoring survey of 64 pesticide residues in pollen, nectar and related beehive matrices (beebread and honey) from China's main honey producing areas was carried out using a modified version of the QuEChERS multi-residue method. The results showed that 93.6% of pollen, 81.5% of nectar, 96.6% of beebread, and 49.3% of honey containing at least one target pesticide were detected either at or above the method detection limits (MDLs), respectively, with up to 19 pesticides found per sample. Carbendazim was the most frequently detected pesticide (present in >85% of the samples), and pyrethroids were also abundant (median concentration = 134.3-279.0 μg/kg). The transfer of pesticides from the environment into the beehive was shown, but the pesticide transference ratio may be affected by complex factors. Although the overall risk to colony health from pesticides appears to be at an acceptable level, the hazard quotient/hazard index (HQ/HI) value revealed that pyrethroids were clearly the most influential contributor, accounting for up to 45% of HI. Collectively, these empirical findings provide further insights into the extent of contamination caused by agricultural pesticide use on honeybee colonies.

Binary and ternary toxicological interactions of clothianidin and eight commonly used pesticides on honey bees (Apis mellifera)

Although many toxicological evaluations have been conducted for honey bees (Apis mellifera), most of these studies have only focused on the effects of individual chemicals. However, honey bees are usually exposed to pesticide mixtures under field conditions. In this study, we examined the effects of individual pesticides and mixtures of clothianidin (CLO) with eight other pesticides [carbaryl (CAR), thiodicarb (THI), chlorpyrifos (CHL), beta-cyfluthrin (BCY), gamma-cyhalothrin (GCY), tetraconazole (TET), spinosad (SPI) and indoxacarb (IND)] on honey bees using a feeding method. Toxicity tests of a 4-day exposure to individual pesticides revealed that CLO had the highest toxicity to A. mellifera, with an LC₅₀ value of 0.24 μg a.i. mL^-1, followed by IND and CHL with LC₅₀ values of 3.40 and 3.56 μg a.i. mL^-1, respectively. SPI and CAR had relatively low toxicities, with LC₅₀ values of 7.19 and 8.42 μg a.i. mL^-1, respectively. In contrast, TET exhibited the least toxicity, with an LC₅₀ value of 258.7 μg a.i. mL^-1. Most binary mixtures of CLO with other pesticides exerted additive and antagonistic effects. However, all the ternary mixtures containing CLO and TET (except for CLO+TET+THD) elicited synergistic responses to bees. Either increased numbers of components in the mixture or/and a unique mode of action appeared to be responsible for the higher toxicity of mixtures. Our findings emphasized the need for risk assessment of pesticide mixtures rather than the individual chemicals. Our data also provided information that might help growers avoid increased toxicity and unnecessary injury to pollinators.

Microplastic Polystyrene Ingestion Promotes the Susceptibility of Honeybee to Viral Infection

Microplastics (MPs) are an emerging threat to ecological conservation and biodiversity; however, little is known of the types and possible impacts of MPs in pollinators. To examine whether MPs were present in honeybees, we analyzed the honeybee samples collected in fields from six provinces in China. Four types MPs were identified in honeybee including polystyrene (PS) by Raman spectroscopic analysis, and these plastic polymers were detected in 66.7% bee samples. Then, we assessed the physical and biological impacts of PS of three sizes (0.5, 5, and 50 μm) on bees for 21 days. Next, we measured how the presence of PS affected the Israeli acute paralysis virus proliferation, a small RNA virus associated with bee colony decline. Experimental evidence showed that a large mass of PS was ingested and accumulated within the midgut and enhanced the susceptibility of bees to viral infection. Not only histological analysis showed that PS, especially 0.5 μm PS, damaged the midgut tissue and was subsequently transferred to the hemolymph, trachea, and Malpighian tubules, but also qPCR and transcriptomic results indicated that genes correlated with membrane lipid metabolism, immune response, detoxification, and the respiratory system were significantly regulated after PS ingestion. Our results highlight neglected MP contamination to the bees, a pollination ecosystem stressed by the anthropogenic pollution, and have implications for human health via ingestion of bee products.

Pesticides: Behavior in Agricultural Soil and Plants

This review considers potential approaches to solve an important problem concerning the impact of applied pesticides of various classes on living organisms, mainly agricultural crops used as food. We used the method of multi-residual determination of several pesticides in agricultural food products with its practical application for estimating pesticides in real products and in model experiments. The distribution of the pesticide between the components of the soil-plant system was studied with a pesticide of the sulfonylureas class, i.e., rimsulfuron. Autoradiography showed that rimsulfuron inhibits the development of plants considered as weeds. Cereals are less susceptible to the effects of pesticides such as acetamiprid, flumetsulam and florasulam, while the development of legume shoots was inhibited with subsequent plant death.

Metabolomics unveils the influence of dietary phytochemicals on residual pesticide concentrations in honey bees

The losses of honey bee colonies and declines of other insect pollinators have been associated with negative effects of pesticides. Honey bees as well as other pollinators are nectar and pollen foragers and thus are exposed to an extensive range of phytochemicals. Understanding the synergistic, additive, and antagonistic effects of plant secondary metabolites and pesticides in honey bees may help to protect honey bee colonies against agrochemicals. In this study, we used untargeted metabolomics to investigate the impact of dietary phytochemical composition on the residual concentration of three pesticides: imidacloprid, tau-fluvalinate and tebuconazole in exposed honey bees. Honey bees were given different diets based on pollen or nectar from four plants: Reseda odorata, Borago officinalis, Phacelia tanacetifolia, and Trifolium repens for two days. Thereafter, they were orally exposed to 10 ng/bee imidacloprid or contact-exposed to 0.9 μg/bee tau-fluvalinate or 5 μg/bee tebuconazole. After 1 h of oral exposure or 24 h of contact exposure, the honey bees were anaesthetised with CO₂, sacrificed by freezing, extracted with a validated QuEChERS method, and residual pesticide concentrations were determined by LC-QTRAP-MS/MS. The phytochemical composition in the given diets were profiled with an UHPLC-Q Exactive-MS/MS. The results revealed that the dietary phytochemical composition has a noteworthy influence on the concentration of residual pesticides in honey bees. The correlation coefficient analysis demonstrated that flavonoids have a reducing effect on the residual concentration of imidacloprid and tau-fluvalinate in honey bees. The results also highlighted that exposure to imidacloprid impaired the metabolism of sugars in honey bees. Exploiting flavonoid-rich plants may protect honey bees against pesticides and hold promise as forage plants in future beekeeping.

Biomonitoring for wide area surveying in landmine detection using honeybees and optical sensing

Humanitarian demining is a worldwide effort and the range of climates and environments prevent any one detection method being suitable for all sites, so more tools are required for safe and efficient explosives sensing. Landmines emit a chemical flux over time, and honeybees can collect the trace residues of explosives (as particles or as vapour) on their body hairs. This capability was exploited using a passive method allowing the honeybees to freely forage in a mined area, where trace explosives present in the environment stuck to the honeybee body, which were subsequently transferred onto an adsorbent material for analysis by a fluorescent polymer sensor. Potential false positive sources were investigated, namely common bee pheromones, the anti-varroa pesticide Amitraz, and the environment around a clean apiary, and no significant response was found to any from the sensor. The mined site gave a substantial response in the optical sensor films, with quenching efficiencies of up to 38%. A model was adapted to estimate the mass of explosives returned to the colony, which may be useful for estimating the number of mines in a given area.

The use of pesticides in Polish agriculture after integrated pest management (IPM) implementation

The aim of the conducted study was to characterize the attitudes and practices of Polish farmers in the area of performing chemical plant protection treatments. A particular attention was paid to identifying the relationship between the direction of changes in the volume of chemical plant protection product consumption and selected attributes of farms. The main time range of the analyses covered the period of 2013-2017. Statistical data and results of representative surveys carried out on a sample of 1101 farms in Poland were used in the research process. Due to the large number of variants of the analysed variables, a multiple correspondence analysis was used, which made it possible to determine the correlation between the examined features (direction of changes in pesticide use relative to the farm area, economic size of the farm and location of the farm). Statistical analysis showed the existence of strong relationships between the physical (1) and economic (2) size of farms and the direction of changes in pesticide consumption ((1) φ2 = 0.0907; (2) φ2 = 0.1141)). According to empirical studies, the reduction of pesticide consumption took place mainly on the smallest farms. The implementation of the integrated plant protection directive has not resulted in significant changes in the form of reduced pesticide use in large-scale field crops. This raises the need to modify the strategy and model of crop protection in large-scale field crops in Poland.

Exposure and Toxicity Characterization of Chemical Emissions and Chemicals in Products: Global Recommendations and Implementation in USEtox

PURPOSE

Reducing chemical pressure on human and environmental health is an integral part of the global sustainability agenda. Guidelines for deriving globally applicable, life cycle based indicators are required to consistently quantify toxicity impacts from chemical emissions as well as from chemicals in consumer products. In response, we elaborate the methodological framework and present recommendations for advancing near-field/far-field exposure and toxicity characterization, and for implementing these recommendations in the scientific consensus model USEtox.

METHODS

An expert taskforce was convened by the Life Cycle Initiative hosted by UN Environment to expand existing guidance for evaluating human toxicity impacts from exposure to chemical substances. This taskforce evaluated advances since the original release of USEtox. Based on these advances, the taskforce identified two major aspects that required refinement, namely integrating near-field and far-field exposure and improving human dose-response modeling. Dedicated efforts have led to a set of recommendations to address these aspects in an update of USEtox, while ensuring consistency with the boundary conditions for characterizing life cycle toxicity impacts and being aligned with recommendations from agencies that regulate chemical exposure. The proposed framework was finally tested in an illustrative rice production and consumption case study.

RESULTS AND DISCUSSION

On the exposure side, a matrix system is proposed and recommended to integrate far-field exposure from environmental emissions with near-field exposure from chemicals in various consumer product types. Consumer exposure is addressed via submodels for each product type to account for product characteristics and exposure settings. Case study results illustrate that product-use related exposure dominates overall life cycle exposure. On the effect side, a probabilistic dose-response approach combined with a decision tree for identifying reliable points of departure is proposed for non-cancer effects, following recent guidance from the World Health Organization. This approach allows for explicitly considering both uncertainty and human variability in effect factors. Factors reflecting disease severity are proposed to distinguish cancer from non-cancer effects, and within the latter discriminate reproductive/developmental and other non-cancer effects. All proposed aspects have been consistently implemented into the original USEtox framework.

CONCLUSIONS

The recommended methodological advancements address several key limitations in earlier approaches. Next steps are to test the new characterization framework in additional case studies and to close remaining research gaps. Our framework is applicable for evaluating chemical emissions and product-related exposure in life cycle assessment, chemical alternatives assessment and chemical substitution, consumer exposure and risk screening, and high-throughput chemical prioritization.

The investigation of honey bee pesticide poisoning incidents in Czechia

Honey bees are major pollinators of crops with high economic value. Thus, bees are considered to be the most important nontarget organisms exposed to adverse effects of plant protection product use. The side effects of pesticides are one of the major factors often linked to colony losses. Fewer studies have researched acute poisoning incidents in comparison to the study of the sublethal effects of pesticides. Here, we compared pesticides in dead/dying bees from suspected poisoning incidents and the suspected crop source according to government protocols. Additionally, we analyzed live bees and bee bread collected from the brood comb to determine recent in-hive contamination. We used sites with no reports of poisoning for reference. Our analysis confirmed that not all of the suspected poisonings correlated with the suspected crop. The most important pesticides related to the poisoning incidents were highly toxic chlorpyrifos, deltamethrin, cypermethrin and imidacloprid and slightly toxic prochloraz and thiacloprid. Importantly, poisoning was associated with pesticide cocktail application. Almost all poisoning incidents were investigated in relation to rapeseed. Some sites were found to be heavily contaminated with several pesticides, including a reference site. However, other sites were moderately contaminated despite agricultural use, including rapeseed cultivation sites, which can influence the extent of pesticide use, including tank mixes and other factors. We suggest that the analysis of pesticides in bee bread and in bees from the brood comb is a useful addition to dead bee and suspected crop analysis in poisoning incidents to inform the extent of recent in-hive contamination.

Next generation sequencing study on RNA viruses of Vespa velutina and Apis mellifera sharing the same foraging area

The predator Asian hornet (Vespa velutina) represents one of the major threats to honeybee survival. Viral spillover from bee to wasp has been supposed in several studies, and this work aims to identify and study the virome of both insect species living simultaneously in the same foraging area. Transcriptomic analysis was performed on V. velutina and Apis mellifera samples, and replicative form of detected viruses was carried out by strand-specific RT-PCR. Overall, 6 and 9 different viral types were reported in V. velutina and A. mellifera, respectively, and five of these viruses were recorded in both hosts. Varroa destructor virus-1 and Cripavirus NB-1/2011/HUN (now classified as Triato-like virus) were the most represented viruses detected in both hosts, also in replicative form. In this investigation, Triato-like virus, as well as Aphis gossypii virus and Nora virus, was detected for the first time in honeybees. Concerning V. velutina, we report for the first time the recently detected honeybee La Jolla virus. A general high homology rate between genomes of shared viruses between V. velutina and A. mellifera suggests the efficient transmission of the virus from bee to wasp. In conclusion, our findings highlight the presence of several known and newly reported RNA viruses infecting A. mellifera and V. velutina. This confirms the environment role as an important source of infection and indicates the possibility of spillover from prey to predator.

Science production of pesticide residues in honey research: A descriptive bibliometric study

This work aims to provide a comprehensive study of the available research information on pesticide residues in honey through literature analysis. The research advancements within this research field from 1948 to 2019 are addressed using the Web of Science database. The results from the 685 articles analyzed indicate that this research field is in the focus of interest nowadays (Price index: 47.5%). The yearly production increased steadily from 2001 on, and authors, journals, and institutions followed Lotka's law. On the other hand, Pico, Y (Spain) (2.5%), Journal of Chromatography A (5.8%), the USA (15.0%) and Agricultural Research Service (USA) (4.0%) were the most productive author, journal, country and institution, respectively. The research hotspots of this field, according to keyword analysis, are related to the chromatographic techniques for the determination of pesticides such as imidacloprid, neonicotinoids, or coumaphos in honey and derivate products such as propolis and wax.