Physicochemical properties and ecotoxicological effects of yttrium oxide nanoparticles in aquatic media: Role of low molecular weight natural organic acids

Factors affecting the toxicity and oxidative stress of layered double hydroxide-based nanomaterials in freshwater algae

Layered double hydroxide (LDH) nanomaterials are utilized extensively in numerous fields because of their distinctive structural properties. It is critical to understand the environmental behavior and toxicological effects of LDHs to address potential concerns caused by their release into the environment. In this work, the toxicological effects of two typical LDHs (Mg-Al-LDH and Zn-Al-LDH) on freshwater green algae (Scenedesmus obliquus) and the main affecting factors were examined. The Zn-Al-LDH exhibited a stronger growth inhibition toxicity than the Mg-Al-LDH in terms of median effect concentration. This toxicity difference was connected to the stability of particle dispersion in water and the metallic composition of LDHs. The contribution of the dissolved metal ions to the overall toxicity of the LDHs was lower than that of their particulate forms. Moreover, the joint toxic action of different dissolved metal ions in each LDH belonged to additive effects. The Mg-Al-LDH induced a stronger oxidative stress effect in algal cells than the Zn-Al-LDH, and mitochondrion was the main site of LDH-induced production of reactive oxygen species. Scanning electron microscope observation indicated that both LDHs caused severe damage to the algal cell surface. At environmentally relevant concentrations, the LDHs exhibited joint toxic actions with two co-occurring contaminants (oxytetracycline and nano-titanium dioxide) on S. obliquus in an additive manner mainly. These findings emphasize the impacts of the intrinsic nature of LDHs, the aqueous stability of LDHs, and other environmental contaminants on their ecotoxicological effects.

Modulation mechanism of phytotoxicity on Ipomoea aquatica Forssk. by surface coating-modified copper oxide nanoparticles and its health risk assessment

To evaluate the influence of surface coatings on nano-fertilizers uptake and their phytotoxicity to crops and its health risk to Chinese adults, trisodium citrate (TC) and polyethylene glycol (PEG) coatings were prepared on the surface of copper oxide nanoparticles (CuO NPs), respectively, with 100 and 500 mg/L of bare CuO NPs, TC-CuO NPs, and PEG-CuO NPs were exposed to soil-grown Ipomoea aquatica Forssk. Combined bio-transmission electron microscopy and micro-CT observed cellular migration of coated CuO NPs in symplastic and apoplastic pathways, as well as nanoparticles transported through vascular tissues to the above-ground parts. Since TC-CuO NPs had less inhibition on vascular phylogeny of I. aquatica roots which was determined by RT-qPCR, their migration in plants was more efficient, thus exhibiting greater phytotoxicity to shoots. Meanwhile, coatings significantly reduced the phytotoxicity of CuO NPs by stimulating plant antioxidant defense. The risk of CuO nano-fertilizers on human dietary safety was evaluated, the HQ > 1 in the 500 mg/L CuO NPs treatment indicated a potential health risk to Chinese adults, which was reduced by the coatings. This work explored for the first time the mechanism of coating effects on nanoparticles migration efficiency and phytotoxicity at the molecular level and demonstrated that the migration of nanoparticles between tissues could have an impact on phytotoxicity. It implied that coating can be tailored to target nanoparticles to specific regions of the plant. In addition, this study highlights the potential health risks associated with the consumption of I. aquatica fertilized with CuO NPs and provides valuable insights into the environmental applications of nano-fertilizers.

Effects of polystyrene microplastics on copper toxicity to the protozoan Euglena gracilis: emphasis on different evaluation methods, photosynthesis, and metal accumulation

Microplastics (MPs) released into aquatic environment interact with other pollutants that already exist in water, potentially altering their toxicity, which poses a new problem for aquatic ecosystems. In the present study, we first evaluated the effects of polystyrene MPs (mPS) on copper (Cu) toxicity to the protozoan Euglena gracilis using three methods based on 96-h acute toxicity, orthogonal test and 12-d sub-acute toxicity data. Thereafter, the 12-d sub-acute exposure was employed to investigate protozoan growth, photosynthetic parameters and pigments, soluble protein, total antioxidant capacity and trace metal accumulation in E. gracilis after exposure to either 1.5 mg/L of Cu, 75-nm mPS (1 and 5 mg/L) or a combination therein, with the objective to understand the underlined mechanisms. The results show that the concentration and exposure time are key factors influencing the effects of the mPS on Cu toxicity. A mPS concentration of 5 mg/L caused significantly more dissipation energy, which is used for photosynthesis and thus decreased photosynthetic efficiency, but this effect weakened after 12 d of exposure. Exposure to Cu alone resulted in significantly high Cu accumulation in the cells and inhibited uptake of manganese and zinc. The presence of mPS did not influence the effects of Cu on trace metal accumulation. Our result suggests that application of multiple methods and indices could provide more information for a comprehensive understanding of the effects of mPS on toxicity of other pollutants. In addition, long-term exposure seems necessary for evaluating mPS toxicity.

Influence of natural organic matter on the transformation of metal and metal oxide nanoparticles and their ecotoxic potency in vitro

Increased use and production of engineered nanoparticles (NPs) lead to an elevated risk of their diffuse dispersion into the aquatic environment and increased concern on unknown effects induced by their release into the aquatic ecosystem. An improved understanding of the environmental transformation processes of NPs of various surface characteristics is hence imperative for risk assessment and management. This study presents results on effects of natural organic matter (NOM) on the environmental transformation and dissolution of metal and metal oxide NPs of different surface and solubility properties in synthetic freshwater (FW) with and without NOM. Adsorption of NOM was evident on most of the studied NPs, except Sb and Sb₂O₃, which resulted in the formation of negatively charged colloids of higher stability and smaller size distribution compared with the same NPs in FW only. The dissolution rate of the NPs in the presence of NOM correlated with the strength of interactions between the carboxylate group of NOM and the particle surface, and resulted in either no (Mn, Sb, ZnO NPs), increased (Co, Sn NPs) and decreased (Ni, NiO, Sb₂O₃, Y₂O₃ NPs) levels of dissolution. One type of metal NP from each group (Mn, Ni, Sn) were investigated to assess whether observed differences in adsorption of NOM and dissolution would influence their ecotoxic potency. The results showed Mn, Ni, and Sn NPs to generate intracellular reactive oxygen species (ROS) in a time and dose-dependent manner. The extent of ROS generation in FW was similar for both Mn and Ni NPs but higher for Sn NPs. These findings are possibly related to interactions and infiltration of the NPs with the cells, which lead to redox imbalances which could induce oxidative stress and cell damage. At the same time, the presence of NOM generally reduced the intracellular ROS generation by 20-40% for the investigated NPs and also reduced cytotoxicity of Sn NPs, which can be attributed to the stronger interaction of carboxylate groups of NOM with the surface of the NPs.

Cell Walls Are Remodeled to Alleviate nY2O3 Cytotoxicity by Elaborate Regulation of de Novo Synthesis and Vesicular Transport

Yttrium oxide nanoparticles (nY2O3), one of the broadly used rare earth nanoparticles, can interact with plants and possibly cause plant health and environmental impacts, but the plant defense response particularly at the nanoparticle-cell interface is largely unknown. To elucidate this, Bright Yellow 2 (BY-2) tobacco (Nicotiana tabacum L.) suspension-cultured cells were exposed to 50 mg L-1 nY2O3 (30 nm) for 12 h. Although 42.2% of the nY2O3 remained outside of protoplasts, nY2O3 could still traverse the cell wall and was partially deposited inside the vacuole. In addition to growth inhibition, morphological and compositional changes in cell walls occurred. Together with a locally thickened (7-13-fold) cell wall, increased content (up to 58%) of pectin and reduction in (up to 29%) hemicellulose were observed. Transcriptome analysis revealed that genes involved in cell wall metabolism and remodeling were highly regulated in response to nY2O3 stress. Expression of genes for pectin synthesis and degradation was up- and down-regulated by 31-78% and 13-42%, respectively, and genes for xyloglucan and pectin modifications were up- and down-regulated by 82% and 81-92%, respectively. Interestingly, vesicle trafficking seemed to be activated, enabling the repair and defense against nY2O3 disturbance. Our findings indicate that, although nY2O3 generated toxicity on BY-2 cells, it is very likely that during the recovery process cell wall remodeling was initiated to gain resistance to nY2O3 stress, demonstrating the plant's cellular regulatory machinery regarding repair and adaptation to nanoparticles like nY2O3.

Antioxidant and Anti-inflammatory Properties of Yttrium Oxide Nanoparticles: New Insights into Alleviating Diabetes

BACKGROUND

Diabetes mellitus is a metabolic disease that requires immediate attention. Oxidative stress that leads to the generation of reactive oxygen species is a contributing factor to the disease progression. Yttrium oxide nanoparticles (Y₂O₃ NPs) have a profound effect on alleviating oxidative damage.

METHODS

The literature related to Y₂O₃ NPs and oxidative stress has been thoroughly searched using PubMed and Scopus databases and relevant studies from inception until August 2020 were included in this scoping review.

RESULTS

Y₂O₃ NPs altered oxidative stress-related biochemical parameters in different disease models including diabetes.

CONCLUSION

Although Y₂O₃ NPs are a promising antidiabetic agent due to their antioxidant and anti- inflammatory properties, more studies are required to further elucidate the pharmacological and toxicological properties of these nanoparticles.

The mechanisms and environmental implications of engineered nanoparticles dispersion

Dispersion of engineered nanoparticles (ENPs) has drawn special research attentions because the environmental behavior, risks, and applications of ENPs are greatly dependent on their dispersing status. This review summarizes the latest research progress of dispersion mechanisms, environmental applications in contaminants adsorption, and toxicity of ENPs dispersed in liquid and in solid matrix (3D-ENPs). Dispersion mechanisms of ENPs, including steric hindrance, electrostatic repulsion and "micelle wrapping" are well understood in single dispersing agent, however, the prediction of ENPs dispersion in real environments is not straightforward because of the diversity of structures, components, and properties of natural organic molecule mixtures. The adsorption characteristics, depending on the exposed surface areas in liquid, are significantly different between dispersed and aggregated ENPs. Comparing with the aggregated ENPs, the toxicity of dispersed ENPs is generally enhanced due to the increased uptake, released metal ions, carried contaminants, and induced ROS. 3D-ENPs not only inherit the excellent adsorption performance of ENPs dispersed in liquid, but also are beneficial to the separation and recycle from aqueous solutions due to their 3D rigid structures. However, the adsorption mechanisms as affected by environmental conditions are still unclear. Additionally, the potential risks of 3D-ENPs should be paid more attentions, with an emphasis on free radicals and stability of 3D structure.

Global Deletome Profile of Saccharomyces cerevisiae Exposed to the Technology-Critical Element Yttrium

The emergence of the technology-critical-element yttrium as a contaminant in the environment raises concern regarding its toxicological impact on living organisms. The molecular mechanisms underlying yttrium toxicity must be delineated. We considered the genomic phenotyping of a mutant collection of Saccharomyces cerevisiae to be of particular interest to decipher key cellular pathways involved either in yttrium toxicity or detoxification mechanisms. Among the 4733 mutants exposed to yttrium, 333 exhibited modified growth, of which 56 were sensitive and 277 were resistant. Several functions involved in yttrium toxicity mitigation emerged, primarily vacuolar acidification and retrograde transport. Conversely, functional categories overrepresented in the yttrium toxicity response included cytoskeleton organization and endocytosis, protein transport and vesicle trafficking, lipid metabolism, as well as signaling pathways. Comparison with similar studies carried out using other metals and stressors showed a response pattern similar to nickel stress. One third of the identified mutants highlighted peculiar cellular effects triggered by yttrium, specifically those affecting the pheromone-dependent signaling pathway or sphingolipid metabolic processes. Taken together, these data emphasize the role of the plasma membrane as a hotspot for yttrium toxicity. The up-to-now lack of data concerning yttrium toxicity at the cellular and molecular levels makes this pioneer study using the model S. cerevisiae an excellent first basis for the assessment of yttrium toxicity toward eukaryotes.

Combined ecotoxicity of binary zinc oxide and copper oxide nanoparticles to Scenedesmus obliquus

A combined ecotoxicity study was carried out with nano-zinc oxide (nZnO) and nano-copper oxide (nCuO) to freshwater algae Scenedesmus obliquus. Concentration-response analysis indicated that the dissolved metal fraction was not the major source of individual and combined toxicity of the metal-oxide nanoparticles (MONPs). Moreover, the contribution of the nCuO (based on metallic mass) to the combined toxicity was greater than that of the nZnO. The observed combined toxicity can be predicted by the pharmacological concepts of concentration addition (CA) and independent action (IA). Combined toxicity prediction (in terms of median effect concentration) based on both concepts tends to overestimate the overall observed toxicity of the MONP mixtures. CA was more accurate for predicting the combined toxicity than IA. It may be concluded that CA gives a valid estimation of the overall ecotoxicity for mixtures comprising of similar acting MONPs.

Impacts of dissolved organic matter on aqueous behavior of nano/micron-titanium nitride and their induced enzymatic/non-enzymatic antioxidant activities in Scenedesmus obliquus

Freshwater dispersion stability and ecotoxicological effects of titanium nitride (TiN) with particle size of 20 nm, 50 nm, and 2-10 μm in the presence of dissolved organic matter (DOM) at various concentrations were studied. The TiN particles that had a more negative zeta potential and smaller hydrodynamic size showed more stable dispersion in an aqueous medium when DOM was present than when DOM was absent. Biochemical assays indicated that relative to the control, the TiN particles in the presence of DOM alleviated to some extent the antioxidative stress enzyme activity in Scenedesmus obliquus. In addition, it was found that the TiN with a primary size of 50 nm at a high concentration presented a significant impact on non-enzymatic antioxidant defense in algal cells.

Prediction of joint algal toxicity of nano-CeO2/nano-TiO2 and florfenicol: Independent action surpasses concentration addition

Co-exposure of aquatic organisms to engineered nanoparticles (ENPs) and antibiotics is likely to take place in the environment. However, the impacts of co-exposure on aquatic organisms are virtually unknown and understanding the joint toxicity of ENPs and antibiotics is a topic of importance. The independent action (IA) model and the concentration addition (CA) model are two of the most common approaches to mixture toxicity assessment. In this study, the joint toxicity of two ENPs (nCeO2 and nTiO2) and one antibiotic (florfenicol, FLO) to Chlorella pyrenoidosa was determined to compare the applicability of the IA and the CA model. Concentration-response analyses were performed for single toxicants and for binary mixtures containing FLO and one of the ENPs at two suspended particle concentrations. The effect concentrations and the observed effects of the binary mixtures were compared to the predictions of the joint toxicity. The observed toxicity associated with the nCeO2 or nTiO2 exposure was enhanced by the concomitant FLO exposure. The joint toxicity of nCeO2 and FLO was significantly higher than that of nTiO2 and FLO. Predictions based on the IA and CA models tend to underestimate the overall toxicity (in terms of median effect concentration) of the binary mixtures, but IA performs better than CA, irrespective of the effect level under consideration and the types of mixtures studied. This result underpins the need to consider the effects of mixtures of ENPs and organic chemicals on aquatic organisms, and the practicability of the IA and CA methods in toxicity assessment of ENPs.