The preparation of bifunctional electrospun air filtration membranes by introducing attapulgite for the efficient capturing of ultrafine PMs and hazardous heavy metal ions

Effect of humic acid-modified attapulgite on polycyclic aromatic hydrocarbon adsorption and release from paddy soil into the overlying water in a rice-crab coculture paddy ecosystem and the underlying process

Phenanthrene (Phe), a typical polycyclic aromatic hydrocarbon (PAH) pollutant, poses an enormous safety risk to rice-crab coculture (RC) paddy ecosystems. In this study, humic acid-modified purified attapulgite (HA-ATP) with a composite structure was successfully fabricated to adsorb PAHs released from paddy soil to overlying water in RC paddy ecosystems in Northeast China. The maximum crab bioturbation intensities for dissolved Phe and particulate Phe were 64.83nullng/L·(cm²·d) and 214.29nullng/L·(cm²·d), respectively. The highest concentration of dissolved Phe released from paddy soil to overlying water due to crab bioturbation reached 80.89nullng/L, while the corresponding concentration of particulate Phe reached 267.36nullng/L. The dissolved organic carbon (DOC) and total suspended solid (TSS) concentrations in overlying water increased correspondingly and were strongly correlated with dissolved Phe and particulate Phe concentrations, respectively (P < 0.05). When 6% HA-ATP was added to the surface layer of paddy soil, the efficiency of the adsorption of Phe release was 24.00%-36.38% for particulate Phe and 89.99%-91.91% for dissolved Phe. Because HA-ATP has a large adsorption pore size (11.33 nm) and surface area (82.41nullm²/g) as well as many HA functional groups, it provided multiple hydrophobic adsorption sites for dissolved Phe, which was conducive to competitive adsorption with DOC in the overlying water. In contrast to that adsorbed by DOC, the average proportion of dissolved Phe adsorbed by HA-ATP reached 90.55%, which reduced the dissolved Phe concentration in the overlying water. Furthermore, even though the particulate Phe was resuspended by crab bioturbation, HA-ATP immobilized particulate Phe due to its capacity to inhibit desorption, which achieved the goal of reducing the Phe concentration in the overlying water. This result was confirmed by research on the adsorption-desorption characteristics of HA-ATP. This research provides an environmentally friendly in situ remediation method for reducing agricultural environmental risks and improving rice crop quality.

Sugarcane leave-derived cellulose nanocrystal/graphene oxide filter membrane for efficient removal of particulate matter

The goal of this study is to isolate cellulose nanocrystals (CNC) from sugarcane leaves (SCL) and fabricate filter membranes. Filter membranes consisting of the CNC and varying amount graphene oxide (GO) were fabricated using vacuum filtration technique. The α-cellulose content increased from 53.56 ± 0.49 % in untreated SCL to 78.44 ± 0.56 % and 84.99 ± 0.44 % in steam-exploded and bleached fibers, respectively. Atomic force microscopy (AFM) and transmission electron microscope (TEM) of CNC isolated from SCL indicated nanosized particles in the range of 7.3 nm and 150 nm for diameter and length, respectively. Morphologies of the fiber and CNC/GO membranes were determined by scanning electron microscopy (SEM) and crystallinity by X-ray diffraction (XRD) analysis of crystal lattice. The crystallinity index of CNC decreased with the addition of GO into the membranes. The CNC/GO-2 recorded the highest tensile index of 3.001 MPa. The removal efficiency increases with increasing GO content. The highest removal efficiency of 98.08 % was recorded for CNC/GO-2. CNC/GO-2 membrane reduced growth of Escherichia coli to 65 CFU compared to >300 CFU of control sample. SCL is a potential bioresource for isolation of cellulose nanocrystals and fabrication of high-efficiency filter membrane for particulate matter removal and inhibition of bacteria.

Nude and Modified Electrospun Nanofibers, Application to Air Purification

Air transports several pollutants, including particulate matter (PM), which can produce cardiovascular and respiratory diseases. Thus, it is a challenge to control pollutant emissions before releasing them to the environment. Until now, filtration has been the most efficient processes for removing PM. Therefore, the electrospinning procedure has been applied to obtain membranes with a high filtration efficiency and low pressure drop. This review addressed the synthesis of polymers that are used for fabricating high-performance membranes by electrospinning to remove air pollutants. Then, the most influential parameters to produce electrospun membranes are indicated. The main results show that electrospun membranes are an excellent alternative to having air filters due to the versatility of the process, the capacity for controlling the fiber diameter, porosity, high filtration efficiency and low-pressure drop.

High-performance multifunctional electrospun fibrous air filter for personal protection: A review

With the increasingly serious air pollution and the rampant coronavirus disease 2019 (COVID–19), preparing high–performance air filter to achieve the effective personal protection has become a research hotspot. Electrospun nanofibrous membrane has become the first choice of air filter because of its small diameter, high specific surface area and porosity. However, improving the filtration performance of the filter only cannot meet the personal needs: it should be given more functions based on high filtration performance to maximize the personal benefits, called, multifunctional, which can also be easily realized by electrospinning technology, and has attracted much attention. In this review, the filtration mechanism of high–performance electrospun air filter is innovatively summarized from the perspective of membrane. On this basis, the specific preparation process, advantages and disadvantages are analyzed in detail. Furthermore, other functions required for achieving maximum personal protection benefits are introduced specifically, and the existing high–performance electrospun air filter with multiple functions are summarized. Finally, the challenges, limitations, and development trends of manufacturing high–performance air filter with multiple functions for personal protection are presented.

Polycaprolactone/Gelatin/Hydroxyapatite Electrospun Nanomembrane Materials Incorporated with Different Proportions of Attapulgite Synergistically Promote Bone Formation

Purpose

To enhance the osteoinductive effect of Hydroxyapatite (HA) in bone tissue engineering, this study manufactured polycaprolactone (PCL)/gelatin (GEL)/HA nanofibrous scaffolds incorporated with different ratios of attapulgite (ATP): HA (0:3, 0:0, 1:1, 2:1 and 3:0) by high-voltage electrospinning. The synergistic effect exerted by ATP and HA on bone formation was explored both in vivo and in vitro.

Methods and Results

First, we determined the group composition and crystal structure of the nanosheets by Fourier transform infrared (FTIR) and X-ray diffraction (XRD) analyses. Then, the physical properties of the scaffolds, including the modulus of elasticity, porosity and water absorption were evaluated. Moreover, the surface microstructure of the nanofibrous scaffolds was captured by Scanning electron microscopy (SEM) and Transmission Electron Microscope (TEM). The biocompatibility of the fabricated scaffolds represented by cell counting kit 8 (CCK-8) and phalloidin staining was also assessed. Next, in vitro osteogenesis was evaluated. Real-time PCR, alkaline phosphatase (ALP) staining and Alizarin red S (ARS) staining results showed that the materials incorporated with HA and ATP at a ratio of 2:1 synergistically promoted more osteoblastic differentiation and extracellular mineralization than scaffolds doped with HA and ATP alone. Last, in vivo, Hematoxylin-Eosin staining (HE staining) and Masson staining showed that groups treated with HA and ATP acquired optimal patterns of bone regeneration.

Conclusion

This study clarified for the first time that the combination of HA and ATP orchestrated biomaterial-induced osseointegration, and the synergistic effect was more significant when the ratio of ATP/HA was 2:1. This conclusion also provides new ideas and a scientific basis for the development of functionalized nanomaterials in bone tissue engineering.

Application of Electrospinning in Antibacterial Field

In recent years, electrospun nanofibers have attracted extensive attention due to their large specific surface area, high porosity, and controllable shape. Among the many applications of electrospinning, electrospun nanofibers used in fields such as tissue engineering, food packaging, and air purification often require some antibacterial properties. This paper expounds the development potential of electrospinning in the antibacterial field from four aspects: fiber morphology, antibacterial materials, antibacterial mechanism, and application fields. The effects of fiber morphology and antibacterial materials on the antibacterial activity and characteristics are first presented, then followed by a discussion of the antibacterial mechanisms and influencing factors of these materials. Typical application examples of antibacterial nanofibers are presented, which show the good prospects of electrospinning in the antibacterial field.

Remediation of emerging environmental pollutants: A review based on advances in the uses of eco-friendly biofabricated nanomaterials

The increased environmental pollutants due to anthropogenic activities are posing an adverse effects and threat on various biotic forms on the planet. Heavy metals and certain organic pollutants by their toxic persistence in the environment are regarded as significant pollutants worldwide. In recent years, pollutants exist in various forms in the environment are difficult to eliminate by traditional technologies due to various drawbacks. This has lead to shifting of research for the development of cost-effective and efficient technologies for the remediation of environmental pollutants. The adaption of adsorption phenomenon from the traditional technologies with the modification of adsorbents at nanoscale is the trended research for mitigating the environmental pollutants with petite environmental concerns. Over the past decade, the hidden potentials of biological sources for the biofabrication of nanomaterials as bequeathed rapid research for remediating the environmental pollution in a sustainable manner. The biofabricated nanomaterials possess an inimitable phenomenon such as photo and enzymatic catalysis, electrostatic interaction, surface active site interactions, etc., contributing for the detoxification of various pollutants. With this background, the current review highlights the emerging biofabricated nano-based adsorbent materials and their underlying mechanisms addressing the environmental remediation of persistent organic pollutants, heavy metal (loid)s, phytopathogens, special attention to the reduction of pathogen-derived toxins and air pollutants. Each category is illustrated with suitable examples, fundamental mechanism, and graphical representations, along with societal applications. Finally, the future and sustainable development of eco-friendly biofabricated nanomaterial-based adsorbents is discussed.

Electrospun Aspirin/Eudragit/Lipid Hybrid Nanofibers for Colon-targeted Delivery Using an Energy-saving Process

Both electrospinning apparatus and their commercial products are extending their applications in a wide variety of fields. However, very limited reports can be found about how to implement an energy-saving process and in turn to reduce the production cost. In this paper, a brand-new type of coaxial spinneret with a solid core and its electrospinning methods are developed. A novel sort of medicated Eudragit/lipid hybrid nanofibers are generated for providing a colon-targeted sustained release of aspirin. A series of characterizations demonstrates that the as-prepared hybrid nanofibers have a fine linear morphology with the aspirin/lipid separated from the matrix Eudragit to form many tiny islands. In vitro dissolution tests exhibit that the hybrid nanofibers are able to effectively prevent the release of aspirin under an acid condition (8.7%±3.4% for the first two hours), whereas prolong the drug release time period under a neutral condition(99.7±4.2% at the seventh hour). The energy-saving mechanism is discussed in detail. The prepared aspirin-loaded hybrid nanofibers can be further transferred into an oral dosage form for potential application in countering COVID-19 in the future.

Utilization of rice husk and waste aluminum cans for the synthesis of some nanosized zeolite, zeolite/zeolite, and geopolymer/zeolite products for the efficient removal of Co(II), Cu(II), and Zn(II) ions from aqueous media

In this paper, rice husk and waste aluminum cans were exploited as silicon and aluminum sources, respectively for the low-cost synthesis of some nanosized zeolite, zeolite/zeolite, and geopolymer/zeolite products. XRD confirmed that the synthesized geopolymer/zeolite products are geopolymer/zeolite A (has a crystallite size of 58.44 nm & abbreviated as G1) and geopolymer/faujasite (has a crystallite size of 25.58 and 20.26 nm & abbreviated as G2 and G3, respectively). Also, the synthesized zeolite products are sodium aluminum silicate hydrate (has a crystallite size of 27.65 and 41.85 nm & abbreviated as H1 and H2, respectively). Besides, the synthesized zeolite/zeolite product is sodium aluminum silicate hydrate/zeolite A (has a crystallite size of 66.01 nm and abbreviated as H3). Moreover, the synthesized products were characterized using other tools such as HR-TEM, FE-SEM, EDX, and FT-IR. The synthesized products were efficiently applied for removing Co(II), Cu(II), and Zn(II) ions from aqueous media and wastewater which was taken from Abuzaabal- Qalyubiyah-Egypt. The maximum uptake capacity of G3 sample toward Co(II), Cu(II), and Zn(II) ions is 134.24 ± 1.26, 126.26 ± 0.32, and 131.93 ± 0.87 mg/g, respectively. The uptake of the studied metal ions is spontaneous, chemical, exothermic, and fitted well with the Langmuir isotherm and pseudo-2nd-order kinetic model.

Recent Advances in Electrospun Sustainable Composites for Biomedical, Environmental, Energy, and Packaging Applications

Electrospinning has gained constant enthusiasm and wide interest as a novel sustainable material processing technique due to its ease of operation and wide adaptability for fabricating eco-friendly fibers on a nanoscale. In addition, the device working parameters, spinning solution properties, and the environmental factors can have a significant effect on the fibers' morphology during electrospinning. This review summarizes the newly developed principles and influence factors for electrospinning technology in the past five years, including these factors' interactions with the electrospinning mechanism as well as its most recent applications of electrospun natural or sustainable composite materials in biology, environmental protection, energy, and food packaging materials.

In situ stabilization of heavy metals in a tailing pond with a new method for the addition of mineral stabilizers-high-pressure rotary jet technology

As the demand for metal minerals grows, the number of mine tailings increases dramatically worldwide. Toxic heavy metals (HMs) in tailings tend to migrate into the environment and cause serious damage to the surroundings. Possible eco-friendly solutions for the in situ stabilization of HMs in tailing ponds are required to reduce their mobility. Leaching tests were performed with attapulgite, zeolite, and bentonite to determine which stabilizer is more efficient. As a result, attapulgite has more significant effect with certain dose on metal mine tailings than zeolite or bentonite, especially in a strongly acidic environment. In addition, an in situ stabilization experiment was performed by adding a stabilizer to a lead-zinc mine tailing pond with high-pressure rotary jet technology. The field experiment indicated that the concentrations of HMs in the leachate substantially decreased (30.5% for Cr, 43.1% for Cu, 87.8% for Zn, 82.9% for Cd, and 42.4% for Pb) after the HMs were stabilized by high-pressure rotary jet technology. A set of parameters for the rotary jet process was obtained when the in situ stabilization experiment was carried out.

Risk assessment and biophysiochemical responses of spinach to foliar application of lead oxide nanoparticles: A multivariate analysis

Despite extensive research progress in the recent past, the data regarding foliar uptake of heavy metals, associated biophysiochemical changes inside plants and possible health hazards are limited. This study determined the effect of foliar application of lead oxide nanoparticles (PbO-NPs) on lead (Pb) accumulation, physiological and biochemical changes inside spinach plants and associated health risks. A green method was used to prepare PbO-NPs using coconut water. Scanning electron microscopy (SEM) showed the preparation of smooth, unwrinkled, granular and spherical PbO-NPs. Spinach leaves were exposed via foliar application to three concentrations of PbO-NPs (0, 10 and 50 mg/plant). Foliar PbO-NPs application resulted in a significant accumulation of Pb in leaves (42.25 μg g^-1), with limited translocation towards root tissues (4.46 μg g^-1). This revealed that spinach can accumulate considerable amount of Pb via foliar uptake. Lead accumulation inside spinach caused a significant decrease in pigment contents (38%) and dry weight (67%). After foliar uptake, Pb caused several-fold increase in the activities of catalase and peroxidase. However, foliar PbO-NPs did not induce significant changes in H₂O₂ production, lipid peroxidation and superoxide dismutase activity. Application of PbO-NPs (50 mg/plant) showed possible health risks (non-carcinogenic) due to ingesting Pb-contaminated leaves of spinach. It is proposed that atmospheric contamination and foliar deposition of metal-PM can seriously affect vegetable growth and can provoke health issues due to ingestion of metal-enriched vegetables. Therefore, atmospheric levels of heavy metals need to be monitored on a regular basis to avoid their food chain contamination and possible human exposure.

Electrospun Environment Remediation Nanofibers Using Unspinnable Liquids as the Sheath Fluids: A Review

Electrospinning, as a promising platform in multidisciplinary engineering over the past two decades, has overcome major challenges and has achieved remarkable breakthroughs in a wide variety of fields such as energy, environmental, and pharmaceutics. However, as a facile and cost-effective approach, its capability of creating nanofibers is still strongly limited by the numbers of treatable fluids. Most recently, more and more efforts have been spent on the treatments of liquids without electrospinnability using multifluid working processes. These unspinnable liquids, although have no electrospinnability themselves, can be converted into nanofibers when they are electrospun with an electrospinnable fluid. Among all sorts of multifluid electrospinning methods, coaxial electrospinning is the most fundamental one. In this review, the principle of modified coaxial electrospinning, in which unspinnable liquids are explored as the sheath working fluids, is introduced. Meanwhile, several typical examples are summarized, in which electrospun nanofibers aimed for the environment remediation were prepared using the modified coaxial electrospinning. Based on the exploration of unspinnable liquids, the present review opens a way for generating complex functional nanostructures from other kinds of multifluid electrospinning methods.