Determination of non-extractable residues in soils: Towards a standardised approach

Dissipation of pesticides and responses of bacterial, fungal and protistan communities in a multi-contaminated vineyard soil

The effect of pesticide residues on non-target microorganisms in multi-contaminated soils remains poorly understood. In this study, we examined the dissipation of commonly used pesticides in a multi-contaminated vineyard soil and its effect on bacterial, fungal, and protistan communities. We conducted laboratory soil microcosm experiments under varying temperature (20°C and 30°C) and water content (20 % and 40 %) conditions. Pesticide dissipation half-lives ranged from 27 to over 300 days, depending on the physicochemical properties of the pesticides and the soil conditions. In both autoclaved and non-autoclaved soil experiments, over 50 % of hydrophobic pesticides (dimethomorph > isoxaben > simazine = atrazine = carbendazim) dissipated within 200 days at 20°C and 30°C. However, the contribution of biodegradation to the overall dissipation of soluble pesticides (rac-metalaxyl > isoproturon = pyrimethanil > S-metolachlor) increased to over 75 % at 30°C and 40 % water content. This suggests that soluble pesticides became more bioavailable, with degradation activity increasing with higher temperature and soil water content. In contrast, the primary process contributing to the dissipation of hydrophobic pesticides was sequestration to soil. High-throughput amplicon sequencing analysis indicated that water content, temperature, and pesticides had domain-specific effects on the diversity and taxonomic composition of bacterial, fungal, and protistan communities. Soil physicochemical properties had a more significant effect than pesticides on the various microbial domains in the vineyard soil. However, pesticide exposure emerged as a secondary factor explaining the variations in microbial communities, with a more substantial effect on protists compared to bacterial and fungal communities. Overall, our results highlight the variability in the dissipation kinetics and processes of pesticides in a multi-contaminated vineyard soil, as well as their effects on bacterial, fungal, and protistan communities.

Bioremediation experiments and dynamic model of petroleum hydrocarbon contaminated soil

Clarifying the occurrence and morphological characteristics of petroleum hydrocarbons (PHs) in soil can facilitate a comprehensive understanding of their migration and transformation patterns in soil/sediment. Additionally, by establishing the dynamic transformation process of each occurrence state, the ecological impact and environmental risk associated with PHs in soil/sediment can be assessed more precisely. The adsorption experiments and closed static incubation experiments was carried out to explore the PHs degradation and fraction distribution in aged contaminated soil under two remediation scenarios of natural attenuation (NA) and bioaugmentation (BA) by exogenous bacteria through a new sequential extraction method based on Tenax-TA, Hydroxypropyl-β-cyclodextrin and Rhamnolipid (HPCD/RL), accelerated solvent extractor (ASE) unit and alkaline hydrolysis extraction. The adsorption experiment results illustrated that bioaugmentation could promote the desorption of PHs in the adsorption phase, and the soil-water partition coefficient Kd decreased from 0.153 L/g to 0.092 L/g. The incubation experiment results showed that compared with natural attenuation, bioaugmentation could improve the utilization of PHs in aged soil and promote the generation of non-extractable hydrocarbons. On the 90th day of the experiment, the concentrations of weakly adsorbed hydrocarbons in the natural attenuation and bioaugmentation experimental groups decreased by 46.44% and 87.07%, respectively, while the concentrations of strongly adsorbed hydrocarbons and non-extractable hydrocarbons increased by 77.93%, 182.14%, and 80.91%, and 501.19%, respectively, compared their initial values. We developed a novel dynamic model and inverted the kinetic parameters of the model by the parameter scanning function and the Markov Chain Monte Carlo (MCMC) method based on the Bayesian approach in COMSOL Multiphysics® finite element software combined with experimental data. There was a good linear relationship between experimental interpolation data and model prediction data. The R2 for the concentrations of weakly adsorbed hydrocarbons ranged from 0.9953 to 0.9974, for strongly adsorbed hydrocarbons from 0.9063 to 0.9756, and for non-extractable hydrocarbons from 0.9931 to 0.9982. These extremely high correlation coefficients demonstrate the high accuracy of the parameters calculated using the Bayesian inversion method.

Diuron, hexazinone, and sulfometuron-methyl applied alone and in mixture in soils: Distribution of extractable residue, bound residue, biodegradation, and mineralization

Biodegradation studies of herbicides applied to the soil alone and in a mixture are required since herbicides are often used in combinations to control weeds. When herbicides are applied in mixtures, interactions may affect their environmental fate. Thus, the objective of this study was to evaluate the distribution of extractable residue, bound residue, biodegradation, and mineralization of diuron, hexazinone, and sulfometuron-methyl when applied alone and in a mixture in two agricultural soils. Biometric flasks filled with two types of soil (clay and sandy) collected from an area cultivated with sugarcane and treated with ¹⁴C-radiolabeled solutions of the herbicides were incubated for 70 d. More ¹⁴C-CO₂ was released when sulfometuron-methyl and hexazinone were applied in a mixture compared to when applied alone. Being used in a combination did not affect the mineralization of diuron. The soil texture directly influenced the mineralization, bound residue, and extractable residue of the three herbicides. The percentage of extractable residue decreased over time for all herbicides. Hexazinone and sulfometuron-methyl had the highest residue extracted on sandy soil when applied alone. Diuron showed the highest percentage of bound residue. The degradation of the three herbicides was higher in the clay soil regardless of the mode of application, which is related to the higher potential of the bacterial community in the clay soil to mineralize the herbicides.

Mobility in the context of exposure-based assessment of chemicals for drinking water resource protection

In order to protect European Union (EU) drinking water resources from chemical contamination, criteria for identifying persistent, mobile, and toxic (PMT) chemicals and very persistent and very mobile (vPvM) chemicals under the EU REACH Regulation were proposed by the German Environment Agency (Umweltbundesamt-UBA). Additionally, new hazard classes for PMT and vPvM substances in the revised EU classification, labeling, and packaging (CLP Regulation) are intended. Therefore, a reliable approach in the identification of potential drinking water resource contaminants is needed. The scientific basis of the property-based PMT/vPvM criteria, focusing on mobility, which dictates the migration of chemical drinking water sources, was evaluated, and a critical analysis of the deviation of sorption metrics from simple behavior was carried out. Based on our evaluation, a K_oc may be used for nonionic substances on a screening level only, requiring a higher tier assessment. It is considered inappropriate for hydrophilic and ionizable chemicals, particularly for soils with low organic carbon contents. The nonextractable residue formation is complex and not well understood but remains significant in limiting the mobility of chemicals through soils and sediments. In order to inform the EU commission's work on the introduction of new hazard classes for PMT and vPvM substances into the European legislation, the derivation of a tiered approach is proposed, which utilizes the weight of evidence available, with adoption of appropriate higher tier models commensurate with the nature of the substance and the data available. Integr Environ Assess Manag 2023;19:775-791. © 2022 The Authors. Integrated Environmental Assessment and Management published by Wiley Periodicals LLC on behalf of Society of Environmental Toxicology & Chemistry (SETAC).

Chlorinated organic pollutants in global flooded soil and sediments: Pollution status and potential risk

Chlorinated organic pollutants (COPs) were widely detected in anaerobic environments while there is limited understanding of their pollution status and potential environmental risks. Here, we applied meta-analysis to identify the occurrence status, pollution sources, and environmental risk of COPs from 246 peer-published literature, including 25 kinds of COPs from 977 sites. The results showed that the median concentrations of COPs were at the ng g^-1 level. By the combination of principal component analysis (PCA) and positive matrix factorization (PMF), we established 7 pollution sources for COPs. Environmental risk assessment found 73.3% of selected sites were at a security level but the rest were not, especially for the wetlands. The environmental risk of COPs was usually underestimated by the existing evaluation methods, such as without the consideration of the non-extractable residues (NER) and the multi-process coupling effect. Especially, the synergetic coupling associations between dechlorination and methanogenesis might increase the risk of methane emission that has barely been previously considered in previous risk assessment approaches. Our results expanded the knowledge for the pollution control and remediation of COPs in anaerobic environments.

Fate of glyphosate and its degradation products AMPA, glycine and sarcosine in an agricultural soil: Implications for environmental risk assessment

Glyphosate can be biodegraded via the aminomethylphosponic acid (AMPA) and the sarcosine/glycine pathway leading to the formation of three intermediate products AMPA, sarcosine or glycine. The fate of the three intermediate compounds of glyphosate biodegradation including nature of non-extractable residues (NERs; harmless biogenic [NERs_biogenic] versus hazardous xenobiotic [NERs_xenobiotic]) in soils has not been investigated yet. This information is crucial for an assessment of environmental risks related to the speciation of glyphosate-derived NERs which may stem from glyphosate intermediates. Therefore, we incubated ¹³C- and ¹⁵N-labeled glyphosate (2-¹³C,¹⁵N-glyphosate) and its degradation product AMPA (¹³C,¹⁵N-AMPA), sarcosine (¹³C₃,¹⁵N-sarcosine) or glycine (¹³C₂,¹⁵N-glycine) in an agricultural soil separately for a period of 75 days. ¹³C₂-glycine and ¹³C₃-sarcosine mineralized rapidly compared to 2-¹³C-glyphosate and ¹³C-AMPA. The mineralization of ¹³C-AMPA was lowest among all four compounds due to its persistent nature. Only 0.5% of the initially added 2-¹³C,¹⁵N-glyphosate and still about 30% of the initially added ¹³C,¹⁵N-AMPA was extracted from soil after 75 days. The NERs formed from ¹³C,¹⁵N-AMPA were mostly NERs_xenobiotic as compared to other three compounds for which significant amounts of NERs_biogenic were determined. We noticed 2-¹³C,¹⁵N-glyphosate was biodegraded via two biodegradation pathways simultaneously; however, the sarcosine/glycine pathway with the formation of harmless NERs_biogenic presumably dominated.

Validation of a method to determine transformation of chemicals in anaerobic liquid pig and cattle manure for the OECD test guideline programme

Manure is widely used as a fertilizer and applied to agricultural land. It may contain highly active chemicals like veterinary medicinal products or biocides, which enter into the environment by this pathway. This is recognized by several regulatory frameworks, however, a detailed method for examining the transformation of chemicals in manure was lacking. This article describes the validation of a method for studying the anaerobic transformation of chemicals in pig and cattle liquid manure. Different steps are covered with an emphasis on the validation ring test and the OECD (Organisation for Economic Cooperation and Development) process that led to the recent adoption of the method as OECD Test Guideline (TG) 320.

Assessing the Persistence and Mobility of Organic Substances to Protect Freshwater Resources

Persistent and mobile organic substances are those with the highest propensity to be widely distributed in groundwater and thereby, when emitted at low-levels, to contaminate drinking water extraction points and freshwater environments. To prevent such contamination, the European Commission is in the process of introducing new hazard classes for persistent, mobile, and toxic (PMT) and very persistent and very mobile (vPvM) substances within its key chemical regulations CLP and REACH. The assessment of persistence in these regulations will likely be based on simulated half-life, t _1/2, thresholds; the assessment of mobility will likely be based on organic carbon-water distribution coefficient, K _OC, thresholds. This study reviews the use of t _1/2 and K _OC to describe persistence and mobility, considering the theory, history, suitability, data limitations, estimation methods, and alternative parameters. For this purpose, t _1/2, K _OC, and alternative parameters were compiled for substances registered under REACH, known transformation products, and substances detected in wastewater treatment plant effluent, surface water, bank filtrate, groundwater, raw water, and drinking water. Experimental t _1/2 values were rare and only available for 2.2% of the 14 203 unique chemicals identified. K _OC data were only available for a fifth of the substances. Therefore, the usage of alternative screening parameters was investigated to predict t _1/2 and K _OC values, to assist weight-of-evidence based PMT/vPvM hazard assessments. Even when considering screening parameters, for 41% of substances, PMT/vPvM assessments could not be made due to data gaps; for 23% of substances, PMT/vPvM assessments were ambiguous. Further effort is needed to close these substantial data gaps. However, when data is available, the use of t _1/2 and K _OC is considered fit-for-purpose for defining PMT/vPvM thresholds. Using currently discussed threshold values, between 1.9 and 2.6% of REACH registered substances were identified as PMT/vPvM. Among the REACH registered substances detected in drinking water sources, 24-30% were PMT/vPvM substances.

Scientific concepts and methods for moving persistence assessments into the 21st century

The evaluation of a chemical substance's persistence is key to understanding its environmental fate, exposure concentration, and, ultimately, environmental risk. Traditional biodegradation test methods were developed many years ago for soluble, nonvolatile, single-constituent test substances, which do not represent the wide range of manufactured chemical substances. In addition, the Organisation for Economic Co-operation and Development (OECD) screening and simulation test methods do not fully reflect the environmental conditions into which substances are released and, therefore, estimates of chemical degradation half-lives can be very uncertain and may misrepresent real environmental processes. In this paper, we address the challenges and limitations facing current test methods and the scientific advances that are helping to both understand and provide solutions to them. Some of these advancements include the following: (1) robust methods that provide a deeper understanding of microbial composition, diversity, and abundance to ensure consistency and/or interpret variability between tests; (2) benchmarking tools and reference substances that aid in persistence evaluations through comparison against substances with well-quantified degradation profiles; (3) analytical methods that allow quantification for parent and metabolites at environmentally relevant concentrations, and inform on test substance bioavailability, biochemical pathways, rates of primary versus overall degradation, and rates of metabolite formation and decay; (4) modeling tools that predict the likelihood of microbial biotransformation, as well as biochemical pathways; and (5) modeling approaches that allow for derivation of more generally applicable biotransformation rate constants, by accounting for physical and/or chemical processes and test system design when evaluating test data. We also identify that, while such advancements could improve the certainty and accuracy of persistence assessments, the mechanisms and processes by which they are translated into regulatory practice and development of new OECD test guidelines need improving and accelerating. Where uncertainty remains, holistic weight of evidence approaches may be required to accurately assess the persistence of chemicals. Integr Environ Assess Manag 2022;18:1454-1487. © 2022 The Authors. Integrated Environmental Assessment and Management published by Wiley Periodicals LLC on behalf of Society of Environmental Toxicology & Chemistry (SETAC).

Persistent, mobile, and toxic plastic additives in Canada: properties and prioritization

The hazards of many plastic additives on human and environmental health are well documented. However, little emphasis has been put on plastic additives that are persistent, mobile, and toxic (PMT) rather than persistent, bioaccumulative, and toxic. Due to their high mobility and stability, it is unlikely that wastewater treatment plants will effectively remove PMT plastic additives. Herein, an in silico analysis was performed to (1) assess the retention of PMT plastic additives registered for use in Canada in wastewater treatment plants; and (2) determine whether their physical-chemical properties and structural features can be used as identifiers for PMT plastic additives with particularly low retention. We identified 124 PMT plastic additives of which 52% had less than 20% removal from wastewater treatment based on predictions using the model SimpleTreat. Log K_aw, log K_ow/D_ow, and log K_oc/D_oc ranges were defined that are indicative of low retention PMT plastic additives. Furthermore, it was found that non-halogenated PMT plastic additives that contain nitrogen are most likely to be poorly retained in wastewater treatment plants. The results of this study provide screening and prioritization criteria, as well as a suspect list for PMT plastic additives.

Kinetics of microbial and photochemical degradation of aflatoxin B1 in a sandy loam and clay soil

In a 28-days experiment, we investigated the dissipation of aflatoxin B1 (AFB1) (0.5–500 \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$${\upmu }\text {g}\,\text {kg}^{-1}$$\end{document}μgkg-1) by microbial (MD) and photodegradation (PD) in two contrasting soils (sandy loam and clay). Sterile incubation in darkness served as control (C). AFB1 was degraded in all scenarios according to simple first-order kinetics with 50% dissipation times of 20–32 (PD), 19–48 (MD), and 56–65 days (C), respectively. Dissipation rates were significantly lower (\documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$\text {p}<0.001$$\end{document}p<0.001) in the clay soil than in the sandy loam soil, likely due to photoquenching and strong binding of AFB1 by clay minerals and humic substances. In the sandy loam, dissipation rate of MD decreased in function of initial AFB1 concentration, probably due to toxic effects on degrading microbes. In contrast, in the clay soil the dissipation rate increased with increasing concentration up to 250 \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$\upmu \text {g}\,\text {kg}^{-1}$$\end{document}μgkg-1, followed by a sharp decrease at 500 \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$\upmu \text {g}\,\text {kg}^{-1}$$\end{document}μgkg-1, indicating an effect of soil texture on the bioavailability of AFB1 to soil microbes. AFB2a was identified as a transformation product in all scenarios. These results confirm the function of soil for AFB1 degradation, which is modulated by abiotic and biotic processes, soil characteristics and initial AFB1 concentration.

Development of an online μ-matrix cartridge extraction method for fipronil extraction in contaminated soils

Nowadays, environment fate and behavior of pesticides in soil is still not fully understood due to the lack of standardized soil extraction method. In this work, a soil-filled micro-matrix cartridge was online combined with high performance liquid chromatography-mass spectrometry (HPLC-MS) through a six-way valve for the simultaneous extraction and determination of residual fipronil in soil. Compared with conventional extraction methods, such as hydroxypropyl-β-cyclodextrin (HPCD) extraction, shaking extraction, ultrasonic-assisted extraction (UAE), three-step extraction and matrix solid phase dispersion (MSPD), the novel, miniaturized, and integrated online micro-matrix cartridge extraction (online μ-MCE) method exhibited better performance in terms of desorption efficiency (99.4%), analysis time, solvent consumption, sensitivity, and automation. In sequential extraction, online μ-MCE could further desorb fipronil from the extracted soil with the percentage of 1.05%-58.55%. High recovery of 92.69% obtained for the ISO certificated test-soil verified the satisfactory accuracy of the method. Besides, its wide universality was also validated in three variables: 1) various pesticides-soil interactions, 2) four types of compounds (aromatic hydrocarbons, carboxylic acids, alcohols and aldehydes), and 3) three types of soils (sandy soil, silty loam and silty clay). The superior desorption capacity might be attributed to the instantaneously increased high-pressure, continuous flow dynamic desorption and short residence time. The present encouraging findings might shed light on new ways to develop a mild, highly efficient, reliable and one-fit-all extraction method toward pesticide contaminated soil.

Biotransformation of Chemicals at the Water–Sediment Interface─Toward a Robust Simulation Study Setup

Studying aquatic biotransformation of chemicals in laboratory experiments, i.e., OECD 308 and OECD 309 studies, is required by international regulatory frameworks to prevent the release of persistent chemicals into natural water bodies. Here, we aimed to address several previously described shortcomings of OECD 308/309 studies regarding their variable outcomes and questionable environmental relevance by broadly testing and characterizing a modified biotransformation test system in which an aerated water column covers a thin sediment layer. Compared to standard OECD 308/309 studies, the modified system showed little inter-replicate variability, improved observability of biotransformation, and consistency with first-order biotransformation kinetics for the majority of 43 test compounds, including pharmaceuticals, pesticides, and artificial sweeteners. To elucidate the factors underlying the decreased inter-replicate variability compared to OECD 309 outcomes, we used multidimensional flow cytometry data and a machine learning-based cell type assignment pipeline to study cell densities and cell type diversities in the sediment and water compartments. Our here presented data on cell type composition in both water and sediment allows, for the first time, to study the behavior of microbial test communities throughout different biotransformation simulation studies. We found that sediment-associated microbial communities were generally more stable throughout the experiments and exhibited higher cell type diversity than the water column-associated communities. Consistently, our data indicate that aquatic biotransformation of chemicals can be most robustly studied in test systems providing a sufficient amount of sediment-borne biomass. While these findings favor OECD 308-type systems over OECD 309-type systems to study biotransformation at the water-sediment interface, our results suggest that the former should be modified toward lower sediment-water ratios to improve observability and interpretability of biotransformation.

Assessment of pesticide inputs into surface waters by agricultural and urban sources - A case study in the Querne/Weida catchment, central Germany

Pesticide inputs into surface waters may cause harmful effects on aquatic life communities and substantially contribute to environmental pollution. The present study aimed at evaluating the input pathways in the Querne/Weida catchment (central Germany) to efficiently target mitigation measures of pesticide losses. Relevant pesticide substances were measured in surface waters in agricultural and urban surroundings and in soil samples within the catchment area. Pesticides application data from farmers were analyzed. Additionally, batch tests were performed to determine sorption and degradation of relevant pesticides for site specific soil properties. Frequency of detection, number of pesticides and maximum concentrations were much higher in the surface water samples in mainly urban surroundings compared to those in agricultural surrounding. The most frequently detected substances were glyphosate, AMPA, diflufenican and tebuconazole in surface water samples and diflufenican, boscalid, tebuconazole and epoxiconazole in the topsoil samples. Glyphosate and AMPA contributed to the highest concentrations in surface water samples (max. 58 μg L^-1) and soil samples (max. 0.19 mg kg^-1). In most cases, pesticide detections in surface water and soil were not consistent with application data from farmers, indicating that urban sources may affect water quality in the catchment area substantially. However, it was observed that pesticide substances remain in the soil over a long time supported by sorption on the soil matrix. Therefore, delayed inputs into surface waters could be suspected. For the implementation of reduction measures, both urban and agricultural sources should be considered. Novel findings of the study: pesticide detections were not consistent with application data from farmers, urban sources contributed substantially to pesticide pollution of surface waters.

New Data Set of Polychlorinated Dibenzo-p-dioxin and Dibenzofuran Half-Lives: Natural Attenuation and Rhizoremediation Using Several Common Plant Species in a Weathered Contaminated Soil

In this paper, a new data set of polychlorinated dibenzo-p-dioxin and dibenzofuran (PCDD/Fs) half-lives (HLs) in soil is presented. Data are derived from a greenhouse experiment performed with an aged contaminated soil under semi-field conditions, obtained from a National Relevance Site (SIN) located in Northern Italy (SIN Brescia-Caffaro). Ten different treatments (combination of seven plant species with different soil conditions) were considered together with the respective controls (soil without plants). The ability of the plants to stimulate the biodegradation of these compounds was evaluated by measuring the PCDD/F concentration reduction in soil over a period of 18 months. The formation of new bound residues was excluded by using roots as a passive sampler of bioaccessible concentrations. The best treatment which significantly reduced PCDD/F concentrations in soil was the one with Festuca arundinacea (about 11-24% reduction, depending on the congener). These decreases reflected in HLs ranging from 2.5 to 5.8 years. Simulations performed with a dynamic air-vegetation-soil model (SoilPlusVeg) confirmed that these HLs were substantially due to biodegradation rather than other loss processes. Because no coherent PCDD/F degradation HL data sets are currently available for soil, they could substantially improve the predictions of soil remediation time, long-range transport, and food chain transfer of these chemicals using multimedia fate models.