Self-cleaning isotype g-C3N4 heterojunction for efficient photocatalytic reduction of hexavalent uranium under visible light

π-electron injection activated dormant ligands in graphitic carbon nitride for efficient and stable uranium extraction

Graphitic carbon nitride (CN) as an adsorbent exhibit promising potential for the removal of uranium in water. However, the lack of active sites seriously restricts its practical application. In contrast to the traditional method of introducing new ligands, we propose a strategy to activate original ligands on CN by injecting π electrons, which can be realized by grafting 4-phenoxyphenol (PP) on CN (PCN). Compared with CN, the maximum adsorption capacity of PCN for uranium increased from 150.9 mg/g to 380.6 mg/g. Furthermore, PCN maintains good adsorption properties over a wide range of uranium concentrations (1 ∼ 60 mg/L) and pH (4 ∼ 8). After 5 consecutive cycles, PCN exhibited sustained uranium removal performance with a little of losses. The experimental and theoretical results show that the enhancement of adsorption performance is mainly due to the ligands activation of CN by delocalization of π electrons from PP. Furthermore, this activation can be enhanced by irradiation, as the CN can be photoexcited to provide additional photoelectrons for PP. As a result, dormant ligands such as N-CN, C-O-C, C-N-H and N-(C)3 can be activated to participate in coordination with uranium. This work provides theoretical guidance for the design and preparation of high efficiency uranium adsorbent.

Synthesis and Characterization of Composite WO3 Fibers/g-C3N4 Photocatalysts for the Removal of the Insecticide Clothianidin in Aquatic Media

Photocatalysis is a prominent alternative wastewater treatment technique that has the potential to completely degrade pesticides as well as other persistent organic pollutants, leading to detoxification of wastewater and thus paving the way for its efficient reuse. In addition to the more conventional photocatalysts (e.g., TiO2, ZnO, etc.) that utilize only UV light for activation, the interest of the scientific community has recently focused on the development and application of visible light-activated photocatalysts like g-C3N4. However, some disadvantages of g-C3N4, such as the high recombination rate of photogenerated charges, limit its utility. In this light, the present study focuses on the synthesis of WO3 fibers/g-C3N4 Z-scheme heterojunctions to improve the efficiency of g-C3N4 towards the photocatalytic removal of the widely used insecticide clothianidin. The effect of two different g-C3N4 precursors (urea and thiourea) and of WO3 fiber content on the properties of the synthesized composite materials was also investigated. All aforementioned materials were characterized by a number of techniques (XRD, SEM-EDS, ATR-FTIR, Raman spectroscopy, DRS, etc.). According to the results, mixing 6.5% W/W WO3 fibers with either urea or thiourea derived g-C3N4 significantly increased the photocatalytic activity of the resulting composites compared to the precursor materials. In order to further elucidate the effect of the most efficient composite photocatalyst in the degradation of clothianidin, the generated transformation products were tentatively identified through UHPLC tandem high-resolution mass spectroscopy. Finally, the detoxification effect of the most efficient process was also assessed by combining the results of an in-vitro methodology and the predictions of two in-silico tools.

Hollow S-Doped ZnFe2O4 Microcubes with Magnetic Separability for Photocatalytic Removal of Uranium(VI) under Different Light Intensity

Under xenon lamps, ZnFe2O4 (ZFO) has been shown to be effective in removing uranium through photocatalysis. However, its performance is still inadequate in low-light environments due to low photon utilization and high electron-hole complexation. Herein, S-doped hollow ZnFe2O4 microcubes (Sx-H-ZFO, x = 1, 3, 6, 9) were synthesized using the MOF precursor template method. The hollow morphology improves the utilization of visible light by refracting and reflecting the incident light multiple times within the confined domain. S doping narrows the band gap and shifts the conduction band position negatively, which enhances the separation, migration, and accumulation of photogenerated charges. Additionally, S doping increases the number of adsorption sites, ultimately promoting efficient surface reactions. Consequently, Sx-H-ZFO is capable of removing U(VI) in low-light environments. Under cloudy and rainy weather conditions, the photocatalytic rate of S3-H-ZFO was 100.31 μmol/(g·h), while under LED lamps (5000 Lux) it was 72.70 μmol/(g·h). More interestingly, a systematic mechanistic investigation has revealed that S doping replaces some of the oxygen atoms to enhance electron transfers and adsorption of O2. This process initiates the formation of hydrogen peroxide, which reacts directly with UO22+ to form solid studtite (UO2)O2·2H2O. Additionally, the promising magnetic separation capability of Sx-H-ZFO facilitates the recycling and reusability of the material. This work demonstrates the potential of ZnFe2O4 extraction uranium from nuclear wastewater.

Novel UV-LED-driven photocatalysis-chlorine activation for carbamazepine degradation by sulfur-doped NH2-MIL 53 (Fe) composites: Electronic modulation effect and the dual role of chlorine

Chlorine activation-inefficient and the generation of disinfection by-products (DBPs) has indeed limited the application of UV/chlorine process. In this study, the typical metal-organic frameworks (MOFs) NH2-MIL53(Fe) were successfully modified with organic ligands containing sulfur functional groups and applied to construct a novel UV-LED-driven heterogeneous chlorine activation system. The generation of intermediate energy levels and the charge redistribution effect on Fe-S bond facilitated the excitation of electrons and realized the effective separation of photohole (hvb+) and photoelectron (ecb-). The involvement of S-NH2-MIL53(Fe) improved the efficiency of UV-LED/chlorine process by 6 times. The effective activation of HOCl/OCl- by hvb+ and ecb- significantly enhanced the yield of HO· and Cl·. More importantly, HOCl/OCl- played a dual role in UV-LED/chlorine/S-NH2-MIL53(Fe) process as a precursor for the generation of free radicals and a catalyst for the enhancement of HO· yield, which could achieve efficient removal of the target pollutants at lower chlorine doses. In addition, the presence of low-valent sulfur species and ecb- accelerated the cycle of Fe(II)/Fe(III) and in-situ generation of HO· and Cl·. The known generation of DBPs in UV-LED/chlorine/S-NH2-MIL53(Fe) process decreased by 37.9% compared to UV-LED/chlorine process. Developing novel UV-LED/chlorine/S-NH2-MIL53(Fe) processes provided a reliable strategy to efficiently purify actual micro-polluted water bodies.

Advanced Photocatalytic Uranium Extraction Strategies: Progress, Challenges, and Prospects

Nuclear energy with low carbon emission and high-energy density is considered as one of the most promising future energy sources for human beings. However, the use of nuclear energy will inevitably lead to the discharge of nuclear waste and the consumption of uranium resources. Therefore, the development of simple, efficient, and economical uranium extraction methods is of great significance for the sustainable development of nuclear energy and the restoration of the ecological environment. Photocatalytic U(VI) extraction technology as a simple, highly efficient, and low-cost strategy, received increasing attention from researchers. In this review, the development background of photocatalytic U(VI) extraction and several photocatalytic U(VI) reduction mechanisms are briefly described and the identification methods of uranium species after photocatalytic reduction are addressed. Subsequently, the modification strategies of several catalysts used for U(VI) extraction are summarized and the advantages and disadvantages of photocatalytic U(VI) extraction are compared. Additionally, the research progress of photocatalytic technology for U(VI) extraction in actual uranium-containing wastewater and seawater are evaluated. Finally, the current challenges and the developments of photocatalytic U(VI) extraction technology in the future are prospected.

A harsh environment resistant robust Co(OH)2@stearic acid nanocellulose-based membrane for oil-water separation and wastewater purification

Traditional membranes are inefficient in treating highly toxic organic pollutants and oily wastewater in harsh environments, which is difficult to meet the growing demand for green development. Herein, the Co(OH)₂@stearic acid nanocellulose-based membrane was prepared by depositing Co(OH)₂ on the nanocellulose-based membrane (NBM) through chemical soaking method, which enables efficient oil/water mixtures separation and degradation of pollutants by photocatalysis in harsh environments. The Co(OH)₂@stearic acid nanocellulose-based membrane (Co(OH)₂@stearic acid NBM) shows good photocatalytic degradation performance for methylene blue pollutants in harsh environment, and has significant degradation rate (93.66%). At the same time, the Co(OH)₂@stearic acid NBM with superhydrophobicity and superoleophilicity also exhibits respectable oil/water mixtures separation performance (n-Hexane, dimethyl carbonate, chloroform and toluene) under harsh environment (strong acid/strong alkali), which has an excellent oil-water mixtures separation flux of 87 L·m^-2·h^-1 (n-Hexane/water) and oil-water mixture separation efficiency of over 93% (n-Hexane/water). In addition, this robust Co(OH)₂@stearic acid NBM shows good self-cleaning and recycling performance. Even though seven oil-water separation tests have been carried out under harsh environment, it can still maintain respectable oil-water mixture separation rate and flux. The multifunctional membrane has excellent resistance to harsh environments, oil-water separation and pollutant degradation can be performed even in harsh environments, which provides a convenient way to treat sewage under harsh conditions efficiently and has great potential in practical application.

New Strategy for the Persistent Photocatalytic Reduction of U(VI): Utilization and Storage of Solar Energy in K+ and Cyano Co-Decorated Poly(Heptazine Imide)

The photocatalytic conversion of soluble U(VI) into insoluble U(IV) is a robust strategy to harvest aqueous uranium, but remains challenging owing to the intermittent availability of solar influx and reoxidation of U(IV) without illumination. Herein, a dual platform based on K⁺ and cyano group co-decorated poly(heptazine imide) (K-CN-PHI) is reported that can drive persistent U(VI) extraction upon/beyond light. K-CN-PHI achieves the photocatalytic reduction of U(VI) with a reaction rate of 0.89 min^-1 , being 47 times greater than that over pristine carbon nitride (PCN). This system can further be triggered by light to form long-living radicals, driving the reduction of U(VI) in the dark for over 3 d. The flexible structural K⁺ as counterions stabilize the electrons trapped by cyanamide groups, enabling the long lifetime of the generated radicals. The results collectively prove K-CN-PHI to be a novel and efficient photocatalyst enabling persistent U(VI) extraction around the clock, and broadening the practical applications of the photocatalytic extraction of U(VI).

Recent developments in photocatalysis of industrial effluents ։ A review and example of phenolic compounds degradation

Industrial expansion and increased water consumption have created water scarcity concerns. Meanwhile, conventional wastewater purification methods have failed to degrade recalcitrant pollutants efficiently. The present review paper discusses the recent advances and challenges in photocatalytic processes applied for industrial effluents treatment, with respect to phenolic compounds degradation. Key operational parameters including the catalyst loading, light intensity, initial pollutants concentration, pH, and type and concentrations of oxidants are evaluated and discussed. Compared to the other examined controlling parameters, pH has the highest effect on the photo-oxidation of contaminants by means of the photocatalyst ionization degree and surface charge. Furthermore, major phenolic compounds derived from industrial sources are comprehensively presented and the applicability of photocatalytic processes and the barriers in practical applications, including high energy demand, technical challenges, photocatalyst stability, and recyclability have been explored. The importance of energy consumption and operational costs for realistic large-scale processes are also discussed. Finally, research gaps in this area and the suggested direction for improving degradation efficiencies in industrial applications are presented. In the light of these premises, selective degradation processes in real water matrices such as untreated sewage are proposed.

Efficient Photocatalytic Extraction of Uranium over Ethylenediamine Capped Cadmium Sulfide Telluride Nanobelts

The photocatalysts for hexavalent uranium (U(VI)) reduction suffered from the low uranium uptake capacity and weak long-wavelength light absorption. Herein, we synthesized the CdS_xTe_1-x nanobelts capped by ethylenediamine (EDA), which provided amino groups as the adsorption sites. With the increase of the Te content, the amino groups on the CdS_xTe_1-x nanobelts decreased because of the variation of the electron density of Cd²⁺, whereas the light adsorption was enhanced due to the narrowed bandgap. In photocatalytic reduction of U(VI), the CdS_0.95Te_0.05-EDA nanobelts exhibited a considerable U(VI) removal ratio of 97.4% with a remarkable equilibrium U(VI) extraction amount on per weight unit of the adsorbent (q_e) of 836 mg/g. The bandgap structure and Fourier transform infrared spectroscopy (FT-IR) spectra analysis revealed that the optimum photocatalytic activity of CdS_xTe_1-x nanobelts was achieved at a 5% of Te^2- doping, which balanced the factors of amino groups and bandgap. This adsorption-photoreduction process offers an ultrahigh uranium extraction capacity over wide uranium concentrations.

Graphitic carbon nitride-based materials for photocatalytic reduction of U(vi)

This work reports the photocatalytic reduction of U(vi) using g-C₃N₄-based materials and discusses the factors affecting the photocatalytic reduction of U(vi).