Correlation between lead speciation and inhalation bioaccessibility using two different simulated lung fluids

The relationship between the inhalation bioaccessibility of potentially toxic elements in road dust from a heavily polluted industrial area and the source of their pollution

One of the sources of chronic exposure to potentially toxic elements (PTE), especially in polluted environments, is the inhalation of resuspended road dust (RD). The aim of this study is to assess the inhalation bioaccessibility of PTE in RD from highly polluted environments from mining/smelting industries and traffic, and to identify any correlations between the bioaccessibility fraction of PTE and the physicochemical characteristics of the particles. RD from the studied area contains extremely high total concentrations of Cr, V, and Mn, which are likely due to pollution from the smelting industry. Additionally, elevated total concentrations of other elements associated with traffic emissions including Zn, Cu, Pb, Sb, and Sn were also measured. The bioaccessibility of PTE was assessed using two synthetic extraction solutions - Gamble's solution (GS) and Artificial Lysosomal Fluid (ALF). The majority of elements showed negligible bioaccessibility in GS. However, quite high inhalation bioaccessibility was observed for Zn, Pb, Sb, Cd, and Mn in the ALF solution, with a mean bioaccessible fraction of 49, 51.5, 41, 50, and 40% respectively. The highest bioavailable fraction was measured for Cd (97%) in a sample collected near a steel production facility and for Pb (95%) in a sample collected near the highway. These results indicate that increased mobility of the elements in inhaled particles occurs only in the case of phagocytosis. The lowest inhalation bioavailability was measured for Cr (mean is 3%). Differential individual particle analysis revealed that about 60% of phases, mostly major (Cr,Ti,V)-bearing metallic alloys, silicates, oxides and sulphides, are stable in ALF solution, while 40% of phases, mostly (Fe,Ca,Mn)-bearing oxides, silicates, sulphides, metals and metallic alloys originating from steel production, ferrochrome, ferrosilicon and vanadium production and from traffic emissions have been heavily corroded or completely dissolved. The study provides valuable information to further assess health hazards from various emission sources.

Sources, bioaccessibility and health risk of heavy metal(loid)s in the particulate matter of urban areas

Exposure to heavy metal(loid)s in airborne particulate matter (PM) could lead to various adverse health effects. The study investigated the total contents and the bioaccessibility of PM-bound heavy metal(loid)s (Cr, Mn, Co, Ni, Cu, Zn, As, Cd, and Pb), identified their potential sources, and evaluated the associated health risk via inhalation in eight typical cities in China (Nanjing, Mianyang, Huangshi, Nanchang, Kunming, Xiamen, Guangzhou, and Wuzhishan). The results showed that PM-bound Cr (VI) and As of all eight cities exceeded the limits of World Health Organization. The bioaccessibility of PM-bound heavy metal(loid)s exhibited large variations, with their means following the order of Cd > Mn > Co > Ni > Cu > Cr > As > Zn > Pb. Traffic and industrial emissions were identified as primary sources in most urban areas. The emission sources have important effects on the bioaccessibility of PM-bound heavy metal(loid)s. In particular, atmospheric Cu has its bioaccessibility significantly correlated with the contributions from traffic emissions. The bioaccessibility-based health risk assessment obtained different results from those using total contents, showing that the non-carcinogenic risks posed by most metal(loid)s were acceptable except for As in Huangshi and Nanchang. These findings highlight the source dependence of bioaccessibility of heavy metal(loid)s in airborne PM, facilitate the identification of priority pollution sources and enhance effective risk-oriented source regulatory strategies in urban areas.

Remediation options to reduce bioaccessible and bioavailable lead and arsenic at a smelter impacted site - consideration of treatment efficacy

In this study, smelter contaminated soil was treated with various soil amendments (ferric sulfate [Fe2(SO4)3], triple superphosphate [TSP] and biochar) to determine their efficacy in immobilizing soil lead (Pb) and arsenic (As). In soils incubated with ferric sulfate (0.6M), gastric phase Pb bioaccessibility was reduced from 1939 ± 17 mg kg-1 to 245 ± 4.7 mg kg-1, while intestinal phase bioaccessibility was reduced from 194 ± 25 mg kg-1 to 11.9 ± 3.5 mg kg-1, driven by the formation of plumbojarosite. In TSP treated soils, there were minor reductions in gastric phase Pb bioaccessibility (to 1631 ± 14 mg kg-1) at the highest TSP concentration (6000 mg kg-1) although greater reductions were observed in the intestinal phase, with bioaccessibility reduced to 9.3 ± 2.2 mg kg-1. Speciation analysis showed that this was primarily driven by the formation of chloropyromorphite in the intestinal phase following Pb and phosphate solubilization in the low pH gastric fluid. At the highest concentration (10% w/w), biochar treated soils showed negligible decreases in Pb bioaccessibility in both gastric and intestinal phases. Validation of bioaccessibility outcomes using an in vivo mouse assay led to similar results, with treatment effect ratios (TER) of 0.20 ± 0.01, 0.76 ± 0.11 and 1.03 ± 0.10 for ferric sulfate (0.6M), TSP (6000 mg kg-1) and biochar (10% w/w) treatments. Results of in vitro and in vivo assays showed that only ferric sulfate treatments were able to significantly reduce As bioaccessibility and bioavailability with TER at the highest application of 0.06 ± 0.00 and 0.14 ± 0.04 respectively. This study highlights the potential application of ferric sulfate treatment for the immobilization of Pb and As in co-contaminated soils.

Inhalation bioaccessibility of inhaled triazole fungicides and health risk assessment during spraying

BACKGROUND

Ambient air pollution caused by pesticide drift has received great attention. To accurately evaluate the health risk of inhaled pesticides, bioaccessibility should be considered. However, methods to reliably assess pesticide residues remain limited, hindering the precise estimation of exposure assessment. We aimed to optimize an in vitro method for the inhalation bioaccessibility (IBA) measurement of triazole fungicides and to incorporate this into inhalation exposure assessment during pesticide spraying.

RESULTS

The IBA of triazole fungicides increased logarithmically with extraction duration, plateauing after 6 h. The frequency of agitation displayed a similar pattern, whereas the ratio of solid to liquid between 1/1500 and 1/250 was considerably negatively associated. The predicted values (35.9-53.5%) for IBA based on optimized methodological parameters determined using a response surface methodology showed an acceptable deviation from experimental values (30.7-50.8%), suggesting feasibility for in vitro IBA measurement. Incorporating IBA into calculations of inhalation exposure amount (IE) yielded a value of 8.5 × 10^-7 -2.1 × 10^-5  mg kg^-1  day^-1 , a 50-68% reduction compared to IE based on total amount. Additionally, the safety exposure threshold was determined for triazole fungicides using benchmark dose modelling of data from lung A549 cell proliferation toxicity assays, and in this context, margin of exposure (MOE) values were calculated to be within an acceptable level.

CONCLUSION

This in vitro method supplements bioaccessibility evaluation based on pesticide inhalation exposure, along with the risk to human health. © 2023 Society of Chemical Industry.

In vitro and in silico bioaccessibility of urban dusts contaminated by multiple legacy sources of lead (Pb)

Lead contamination from gasoline, paint, pesticides, and smelting have unique chemical structures. Recent investigations into Pb speciation in urban soils and dusts from multiple sources have revealed emerging forms which differ from the initial sources. This results from reactions with soil constituents leading to transformation to new forms for which the bioaccessibilities remain uninvestigated. We investigated the in vitro and in silico bioaccessibility of these emerging forms in three physiologically relevant milieux: artificial lysosomal fluid (ALF), simulated epithelial lung fluid (SELF), and simulated gastric fluid (SGF). Species were validated using extended X-ray absorption fine structure spectroscopy. Results highlight diverse bioaccessibilities which are form and compartmentally-dependent. In ALF the bioaccessibility trend was humate-bound Pb (86%) > hydrocerussite (79%) > Fe oxide-bound Pb (47%) > galena (10%) > pyromorphite (4%) > Mn oxide-bound Pb (2%). Humate-bound Pb, hydrocerussite, Fe and Mn oxide-bound Pb were 100% bioaccessible in SGF while pyromorphite and galena were 26%, and 8%, respectively. Bioaccessibility in SELF was very low (< 1%) and significantly lower than ALF and SGF (p < 0.001). In silico bioaccessibilities modeled using equilibrium solubilities in extraction solutions were in good agreement with empirical measurements. These emerging forms of Pb have a wide range of bioaccessibilities that can influence their toxicity and impact on human health.

Impact of smelter re-development on spatial and temporal airborne Pb concentrations

Total suspended particulate (TSP) and PM₁₀ filters collected from two ambient air monitoring stations in Port Pirie were analysed to determine the impact of a lead (Pb) smelter redevelopment on air quality parameters including total elemental concentration, Pb isotopic ratio, Pb bioaccessibility and Pb speciation. Filters from 2009 to 2020 were analysed with a focus on samples from 2017 (immediately prior to smelter redevelopment) and 2020 (post-smelter redevelopment). Lead concentration in 2009-2020 TSP was variable ranging up to 6.94 μg m^-3 (mean = 0.57 μg m^-3), however, no significant decrease in Pb concentration was observed at either Port Pirie West (p = 0.56, n = 34) or Oliver Street (p = 0.32, n = 28) monitoring stations when 2017 and 2020 TSP values were compared. Similarly, no significant difference (p = 0.42) in PM₁₀ Pb concentration was observed in 2017 (mean = 0.80 μg m^-3) and 2020 (0.60 μg m^-3) Oliver Street filters. Although no change in percentage Pb bioaccessibility was observed when 2017 and 2020 Port Pirie West TSP samples were compared (mean of 88.7% versus 88.0%), Pb bioaccessibility was lower (p < 0.005) in both 2020 TSP (mean of 83.9% versus 62.9%) and PM₁₀ (mean of 70.8% versus 58.3%) Oliver Street filters compared to 2017. While scanning electron microscopy, energy dispersive x-ray spectroscopy identified a number of Pb phases within filters (galena, anglesite, cerussite, conglomerates), differences in Pb speciation between 2017 and 2020 filters could not be identified although it was presumed that this influenced Pb bioaccessibility outcomes at Oliver Street. Data from this study suggests that recent smelter redevelopments have not significantly decreased the concentrations of airborne Pb in Port Pirie although re-entrainment of soil-Pb from historical impact may also be a contributing Pb source.

Bioaccessibility, source and human health risk of Pb, Cd, Cu and Zn in windowsill dusts from an area affected by long-term Pb smelting

Non-ferrous metal smelting results in heterogenous spatial distribution of potentially toxic metals (PTM) near smelters. In this work, windowsill dusts were collected from smelting (SA) and urban (UJ) sub-areas of Jiyuan (a city affected by >70 years of Pb smelting) to investigate PTM source and bioaccessibility. The <10 μm fraction of dusts were analyzed for total and bioaccessible Pb, Cd, Cu and Zn concentrations; bioaccessibility was analyzed by a three-stage assay (i.e., lung phase, gastric phase and gastrointestinal phase) using artificial lysosomal fluid (ALF, L phase) followed by simulated gastric and gastrointestinal fluids (G and GI phases). This assay mimicked the movement of particles phagocytosed by alveolar macrophages in the respiratory system, then transported up the oropharynx and subsequently swallowed and transported into the digestive system. Zinc had greater bioaccessible concentrations in L and GI phases than other metals, and the mean L phase bioaccessible PTM concentrations in SA were greater than in UJ. The mean L + GI phase bioaccessible concentrations of Pb, Cd, Cu and Zn in SA were 280, 79, 124 and 1458 mg kg^-1, while those in UJ were 215, 54, 116 and 598 mg kg^-1, respectively. The L phase extracted 87.7 to 98.8 % of PTM within the L + GI assay. Lead had a lower L + GI bioaccessibility than Cd, Cu and Zn (70-76 % vs. 82-92 %). Higher tolerable Cd carcinogenic risks based on bioaccessibility were found in SA sub-area than in UJ while no carcinogenic or non-carcinogenic risk was found for other metals. Lead isotopic ratios indicated that both Pb ore and smelting bottom ash contributed to dust Pb accumulation in SA, while coal burning, lead ore, Pb smelting bottom ash and diesel engine exhaust contributed to dust Pb accumulation in UJ. Overall, results indicated heterogenous distribution of PTM source and bioaccessibility in the vicinity of Pb smelters.

Plumbojarosite formation in contaminated soil to mitigate childhood exposure to lead, arsenic and antimony

In this study, a novel method for lead (Pb) immobilization was developed in contaminated soils using iron (III) (Fe³⁺) in conjunction with 0.05 M H₂SO₄. During method optimization, a range of microwave treatment times, solid to solution ratios, and Fe₂(SO₄)₃/H₂SO₄ concentrations were assessed using a mining/smelting impacted soil (BHK2, Pb: 3031 mg/kg), followed by treatment of additional Pb contaminated soils (PP, Pb: 1506 mg/kg, G10, Pb: 2454 mg/kg and SoFC-1, Pb: 6340 mg/kg) using the optimized method. Pb bioaccessibility was assessed using USEPA Method 1340, with Pb speciation determined by X-ray Absorption (XAS) spectroscopy. Treatment efficacy was also validated using an in vivo mouse assay, where Pb accumulation in femur, kidney and liver was assessed to confirm in vitro bioaccessibility outcomes. Results showed that Pb bioaccessibility could be reduced by 77.4-97.0% following treatment of soil with Fe₂(SO₄)₃ (0.4-1.0 M), H₂SO₄ (0.05 M) at 150 °C for 60 min in a closed microwave system. Results of bioavailability assessment demonstrated treatment effect ratio of 0.06-0.07 in femur, 0.06-0.27 in kidney and 0.06-0.11 in liver (bioavailability reduction between 73% and 93%). Formation of plumbojarosite in treated soils was confirmed by XAS analysis.

Comparison of Synthetic Sweat and Influence of Sebum in the Permeation of Bioaccessible Metal(loid)s from Contaminated Soils through a Synthetic Skin Membrane

Dermal exposure to metal(loid)s from contaminated soils has received less attention than oral and inhalation exposure. Still, it can be a relevant pathway for some contaminants. Comparison of synthetic sweats (donor solutions), the influence of sebum, and the characterization of diffusion parameters through a synthetic membrane (acting as skin surrogate) in the permeation of metal(loid)s (As, Cr, Cu, Ni, Pb, and, Zn) from polluted soils is missing. The dermal bioaccessibility tests were performed using two sweat compositions [EN 1811, pH 6.5 (sweat A) and NIHS 96-10, pH 4.7 (sweat B)]. Diffusion parameters of soluble metal(loid)s using the Franz cell methodology were calculated using the Strat-M membrane. The influence of synthetic sebum in the permeation of metal(loid)s was also investigated. The metal(loid) bioaccessibility percentage was higher for sweat B (pH 4.7) compared to sweat A (pH 6.5), attributed to lower pH of sweat B. Among the six elements tested, only chromium and copper permeated the membrane. Permeation coefficient (K_p) was higher for chromium in sweat A (0.05-0.11 cm h^-1) than sweat B (0.0007-0.0037 cm h^-1) likely due to a higher pH and thus more permeable Cr species. The presence of sebum increased lag times for copper permeation. Additional studies regarding speciation of metal(loid)s following extractions in synthetic sweat and comparison of synthetic membrane Strat-M and human skin in the permeation of metal(loid)s are recommended.

New Insights into Health Risk Assessments for Inhalational Exposure to Metal(loid)s: The Application of Aqueous Chemistry Modelling in Understanding Bioaccessibility from Airborne Particulate Matter

Aqueous modelling of chemical speciation in simulated lung fluid (SLF) enables a better understanding of the underlying chemical factors that influence metal(loid) inhalation bioaccessibility from airborne particulate matter. Such an approach can be used to supplement experimental techniques that are integral to the health risk assessment of metal(loid) exposure by inhalational routes. In this paper, we modelled the aqueous chemistry of airborne particulate-bound metal(loid)s (As, Cu, Mn, Pb and Zn) in a SLF based on Gamble’s solution (neutral pH). The modelling was performed using two software packages (Geochemist’s Workbench 14 and OLI Studio 9.5) and a total of five thermochemical databases (GWB Thermo, MINTEQ, PHREEQC, WATEQ4F and the default database for OLI Studio). Modelled results were compared with experimentally determined bioaccessibilities for the NIST 2710a standard reference material (SRM) and with literature-reported bioaccessibilities for NIST 1648a and BCR 038 SRMs. Whilst the models correctly describe the observed increase in bioaccessibility for more dilute solid/liquid extraction ratios, the performance of the models against the fractional bias of the mean (FBmean) and the normalised mean square error (NMSE) statistical metrics was generally outside the acceptance criteria. Findings from an analysis of the main aqueous chemical species predicted to be present in SLF indicate that carbonate and chloride complexes of Cu, Mn, Pb and Zn predominate, whilst free cations (for Cu, Mn and Zn) and hydroxides (for Cu) also play a role in solubilisation. Arsenic is not predicted to form significant complexes with the SLF components and is present in solution mainly as the HAsO42− ion and its conjugate acid, H2AsO4−. For modelled runs where glycine and citrate were present, significant increases in the bioavailability of Cu and Zn were predicted as a result of complexation with these ligands. An additional finding from our experimental bioaccessibility results for NIST 2710a was that the inclusion of the lung fluid surfactant dipalmitoylphosphatidylcholine (DPPC) in the SLF did not significantly affect the bioaccessibility. Our study provides useful insights into the likely aqueous- and solid-phase speciation of metal(loid)s in SLF and highlights that future developments in this area should consider the role of mineralogy and surface interactions.

Plastic, nutrition and pollution; relationships between ingested plastic and metal concentrations in the livers of two Pachyptila seabirds

Naturally occurring metals and metalloids [metal(loid)s] are essential for the physiological functioning of wildlife; however, environmental contamination by metal(loid) and plastic pollutants is a health hazard. Metal(loid)s may interact with plastic in the environment and there is mixed evidence about whether plastic ingested by wildlife affects metal(loid) absorption/assimilation and concentration in the body. We examined ingested plastic and liver concentration of eleven metal(loid)s in two seabird species: fairy (Pachyptila turtur) and slender-billed prions (P. belcheri). We found significant relationships between ingested plastic and the concentrations of aluminium (Al), manganese (Mn), iron (Fe), cobalt (Co), copper (Cu) and zinc (Zn) in the liver of prions. We investigated whether the pattern of significant relationships reflected plastic-metal(loid) associations predicted in the scientific literature, including by transfer of metals from ingested plastics or malnutrition due to dietary dilution by plastics in the gut. We found some support for both associations, suggesting that ingested plastic may be connected with dietary dilution / lack of essential nutrients, especially iron, and potential transfer of zinc. We did not find a relationship between plastic and non-essential metal(loid)s, including lead. The effect of plastic was minor compared to that of dietary exposure to metal(oid)s, and small plastic loads (< 3 items) had no discernible link with metal(loid)s. This new evidence shows a relationship between plastic ingestion and liver metal(loid) concentrations in free-living wildlife.