Bamboo-biochar and hydrothermally treated-coal mediated geochemical speciation, transformation and uptake of Cd, Cr, and Pb in a polymetal(iod)s-contaminated mine soil

Chicken manure-derived biochar enhanced the potential of Comamonas testosteroni ZG2 to remediate Cd contaminated soil

The combined remediation of Cd-contaminated soil using biochar and microorganisms has a good application value. In this study, the effect of chicken manure-derived biochar on CdCO3 precipitation induced by Comamonas testosteroni ZG2 was investigated. The results showed that biochar could be used as the carrier of strain ZG2, enhance the resistance of strain ZG2 to Cd, and reduce the toxicity of Cd to bacterial cells. Cd adsorbed by biochar could be induced by strain ZG2 to form CdCO3 precipitation. Strain ZG2 could also induce CdCO3 precipitation when biochar was added during precipitation formation and fermentation broth formation. The CdCO3 precipitation could enter the pores of the biochar and attach to the surface of the biochar. The single and combined effects of strain ZG2 and biochar could realize the remediation of Cd-contaminated soil to a certain extent. The overall effect was in the order of strain ZG2 with biochar > biochar > strain ZG2. The combination of strain ZG2 and biochar reduced soil available Cd by 48.2%, the aboveground biomass of pakchoi increased by 72.1%, and the aboveground Cd content decreased by 73.3%. At the same time, it promoted the growth and development of the root system and improved the microbial community structure of the rhizosphere soil. The results indicated that chicken manure-derived biochar could enhance the stability of CdCO3 precipitation induced by strain ZG2, and strain ZG2 combined with biochar could achieve a more stable remediation effect on Cd-contaminated soil.

As(V) adsorption by FeOOH@coal gangue composite from aqueous solution: performance and mechanisms

Arsenic (As) pollution in water poses a significant threat to the ecological environment and human health. Meanwhile, the resource utilisation of coal gangue is of utmost importance in ecologically sustainable development. Thus, the FeOOH@coal gangue composite (FeOOH@CG) was synthesised for As(V) adsorption in this study. The results showed that α-FeOOH, β-FeOOH and Schwertmannite loaded on the surface of FeOOH@CG. Moreover, the adsorption behaviour of As(V) by FeOOH@CG was investigated under different reaction conditions, such as pH, contact time, initial concentration and co-existing anions. The optimum adsorption conditions were as follows: initial As(V) concentration of 60 mg/L, pH of 3.0 and adsorption time of 180-240 h. The adsorption capacity of FeOOH@CG for As(V) was pH-dependent and the maximum adsorption capacity was 185.94 mg/g. The presence of anions (H 2 PO 4 - , HCO 3 - and C l - ) decreased the adsorption efficiency of FeOOH@CG for As(V). The adsorption process of FeOOH@CG for As(V) could be well-described by the pseudo-second-order model and Langmuir model, indicating that the adsorption process mainly depended on chemical adsorption. The thermodynamic analysis suggested that the adsorption was a spontaneous and endothermic process. In addition, according to the analyses of XRD, FTIR and XPS, the dominant mechanisms of As(V) adsorption by FeOOH@CG were electrostatic attraction, complexation and precipitation. In conclusion, FeOOH@CG has great potential as an efficient and environmentally friendly adsorbent for As(V) adsorption from aqueous solution.

Unraveling the critical role of iron-enriched sludge hydrochar in mediating the Fenton-like oxidation of triclosan

The traditional Fenton system is subject to the low efficiency of the Fe(III)/Fe(II) conversion cycle, with significant attempts made to improve the oxidation efficiency by overcoming this hurdle. In support of this goal, iron-enriched sludge-derived hydrochar was prepared as a high-efficiency catalyst by one-step hydrothermal carbonization and its performance and mechanisms in mediating the oxidation of triclosan were explored in the present study. The hydrochar prepared at 240 °C for 4 h (HC_240-4) had the highest removal of triclosan (97.0%). The removal of triclosan in the HC_240-4/H₂O₂ system was greater than 90% in both acidic and near-neutral environments and remained as high as 83.5% after three cycles, indicating the broad pH applicability and great recycling stability of sludge-derived hydrochar in Fenton-like systems. H₂O₂ was activated by both persistent free radicals (PFRs; 19.7%) and iron (80.3%). The binding of Fe(III) to carboxyl decreased the electron transfer energy from H₂O₂ to Fe(III), making its degradation efficiency 2.6 times greater than that of the conventional Fenton reaction. The study provides a way for iron-enriched sludge utilization and reveals a role for hydrochar in promoting iron cycling and electron transfer in the Fenton reaction.

A novel and capable supported phenylazophenylenediamine-based nano-adsorbent for removal of the Pb, Cd, and Ni ions from aqueous solutions

Herein, we report the synthesis and characterization of chrysoidine (4-phenylazo-m-phenylenediamine) grafted on magnetic nanoparticles (Fe₃O₄@SiO₂@CPTMS@PhAzPhDA = FeSiPAPDA) as a novel and versatile adsorbent used for the satisfactory removal of Pb, Ni, and Cd ions from contaminated water via the formation of their complexes. The Freundlich, Langmuir, Temkin, and Redlich-Patterson isotherm models were studied to reveal the adsorption capability of the adsorbent and were found out that the Langmuir model is more compatible with the nano-adsorbent behavior. Moreover, according to the ICP tests as well as based on the Langmuir isotherm, the maximum adsorption capacity of the FeSiPAPDA-based adsorbent for the Pb ions (97.58) is more than that of Cd (78.59) and Ni ions (64.03).

The effective removal of Ni2+, Cd2+, and Pb2+ from aqueous solution by adenine-based nano-adsorbent

The presence of heavy metal ions in drinking and wastewater generates environmental and human health concerns as they are known as cumulative poisons. Therefore, the purification of contaminated waters is an important ecological issue. Various techniques have been developed to address this issue, where adsorption has received widespread attention. The facile synthesis of effective adenine-based nano-adsorbents is reported and adsorptive removal of Ni²⁺, Cd²⁺, and Pb²⁺ from aqueous media was investigated by inductively-coupled plasma analyses, adsorption isotherms, kinetics, and thermodynamic studies. The effects of pH, adsorbent dose, contact time, and temperature were optimized. The maximum adsorption capacity was achieved at pH = 7, an adsorbent dose of 25 mg, and an initial concentration of 50 mg L^-1 at 25 °C. A thermodynamic study showed that adsorption is an endothermic process, and the Langmuir model fitted well to the ion adsorption data to reveal that the maximum adsorption capacities for Ni²⁺, Cd²⁺, and Pb²⁺ were 273.7, 252.4, and 249.8 mg g^-1, respectively.

Inconsistent effects of a composite soil amendment on cadmium accumulation and consumption risk of 14 vegetables

Organic and inorganic mixtures can be developed as immobilizing agents that could reduce heavy metal accumulation in crops and contribute to food safety. Here, inorganic materials (lime, L; zeolite, Z; and sepiolite, S) and organic materials (biochar, B, and compost, C) were selectively mixed to produce six composite soil amendments (LZBC, LSBC, LZC, LZB, LSC, and LSB). Given the fact that LZBC showed the best performance in decreasing soil Cd availability in the incubation experiment, it was further applied in the field condition with 14 vegetables as the test crops to investigate its effects on crop safety production in polluted greenhouse. The results showed that LZBC addition elevated rhizosphere soil pH by 0.1-2.0 units and reduced soil Cd availability by 1.85-37.99%. Both the biomass and the yields of edible parts of all vegetables were improved by LZBC addition. However, LZBC addition differently affected Cd accumulation in edible parts of the experimental vegetables, with the observation that Cd contents were significantly reduced in Allium fistulosum L., Amaranthus tricolor L., and Coriandrum sativum Linn., but increased in the three species of Lactuca sativa. Further health risk assessment showed that LZBC application significantly decreased daily intake of metal (DIM), health risk index (HRI), and target hazard quotient (THQ) for Cd in Allium fistulosum L., Amaranthus tricolor L., and Coriandrum sativum Linn., whereas increased all the indexes in Lactuca sativa. Our results showed that the effect of a composite amendment on Cd accumulation in different vegetables could be divergent and species-dependent, which suggested that it is essential to conduct a pre-experiment to verify applicable species for a specific soil amendment designed for heavy metal immobilization.

Revealing carbon-iron interaction characteristics in sludge-derived hydrochars under different hydrothermal conditions

Hydrothermal conversion is seen as a potential sustainable solution for the disposal and utilization of sewage sludge. One-step hydrothermal carbonization was used to prepare iron-based sludge hydrochars, and the microstructure properties of hydrochars under different hydrothermal conditions were investigated, with emphasis on the inherent interaction mechanisms between carbon and iron. The aromaticity of hydrochars increased with increasing hydrothermal temperature and time, whereas the specific surface area and pore volume as well as magnetic characteristics of hydrochars were only contingent on temperature. Once the temperature reached 160 °C, Fe₂O₃ in sludge was completely transformed into Fe₃O₄ in hydrochars. Simulated experiments suggest that glucose is more advantageous than protein in the iron transformation and mesopore formation. The coexistence of glucose, protein, and FeCl₃ improved the aromaticity as well as specific surface area and pore volume of hydrochars. This study provides a basis for designing high performance iron-based sludge hydrochars.

Recent advances of carbon-based nano zero valent iron for heavy metals remediation in soil and water: A critical review

Heavy metal pollution in soil and water has presented a new challenge for the environmental remediation technology. Nano zero valent iron (nZVI) has excellent adsorbent properties for heavy metals, and thus, exhibits great potential in environmental remediation. Used as supporting materials for nZVI, carbon-based materials, such as activated carbon (AC), biochar (BC), carbon nanotubes (CNTs), and graphene (GNs) with aromatic rings formed by carbon atoms as the skeleton, have a large specific surface area and porous structure. This paper provides a comprehensive review on the advancement of carbon-based nano zero valent iron (C-nZVI) particles for heavy metal remediation in soil and water. First, different types of carbon-based materials and their combination with nZVI, as well as the synthesis methods and common characterization techniques of C-nZVI, are reviewed. Second, the mechanisms for the interactions between contaminants and C-nZVI, including adsorption, reduction, and oxidation reactions are detailed. Third, the environmental factors affecting the remediation efficiency, such as pH, coexisting constituents, oxygen, contact time, and temperature, are highlighted. Finally, perspectives on the challenges for utilization of C-nZVI in the actual contaminated soil and water and on the long-term efficacy and safety evaluation of C-nZVI have been proposed for further development.

A critical review of biochar-based materials for the remediation of heavy metal contaminated environment: Applications and practical evaluations

The contamination of heavy metals (HMs) in the environment has aroused a global concern. The valid remediation of HM contaminated environment is a highly significant issue. As alternative to carbon materials, biochar has been vastly documented for the remediation of HM contaminated environment. However, there are some possible imperfections to meet the actual remediation tasks as the finite properties of raw biochar, and the remediation process is complex and unexpectedly. This review focuses on the progress made on environmental HM remediation by biochar-based materials within the past six years. The property analysis and key modifications of biochar are summarized inspired by their applicability or necessity for HM decontamination, and the environmental remediation as well as the implicated mechanisms are thoroughly elaborated from multiple pivotal sides. The evaluations of practical application associated with biochar amendment are also presented. Finally, some pertinent improvements and research directions are proposed. To our knowledge, this article is the first time to make a systematic summary on the reliability and practicability of biochar-based materials for environmental HM remediation, and critically pointed out the existing issues to facilitate the judicious design of biochar-based materials and understanding the research trends. It is also aims to provide reference for subsequent research and propel the practical applications.

The sorption and short-term immobilization of lead and cadmium by nano-hydroxyapatite/biochar in aqueous solution and soil

In this study, the composite materials using different ratios of biochar (BC) to nano-hydroxyapatite (nHAP) were prepared for the remediation of lead (Pb) and cadmium (Cd) contaminated water and soil. The sorption and the immobilization experiments indicated a higher sorption capacity and immobilization efficiency of Pb compared to those of Cd. The characteristics of XRD, FTIR, SEM, and XPS manifested that dissolution-precipitation, cation exchange, complexation, and cation-π interaction were the main four mechanisms for the sorption of Pb²⁺ and Cd²⁺ using composite material PC1 (nHAP/BC = 1/1). From semi-quantitative analysis, the mineral effect accounted for the majority of the immobilization of Pb and Cd. Due to obvious Pb-precipitates in the sorbed material, dissolution-precipitation primarily affected the sorption of Pb using PC1, while the immobilization of Cd was mainly attributable to cation exchange. Such results corresponded to the stable Pb-precipitates and unstable Cd-compounds in soil, among which the latter was prone to be released into the environment. The sorption capacity in aqueous solutions and the immobilization efficiencies in the soil for both Pb and Cd increased with the addition of nHAP, which were linearly correlated to the nHAP proportion in the composite materials. In future practical applications, the percentages of composite materials can be designed according to the specific pollutant concentration. This study sheds light on the explicit immobilization mechanisms for Pb and Cd in aqueous solutions to better understand their behaviors in the soil remediated by relevant materials.

In‒situ immobilization remediation, soil aggregate distribution, and microbial community composition in weakly alkaline Cd‒contaminated soils: A field study

Biochar has advantages of a large specific surface area and micropore structure, which is beneficial for immobilization remediation of heavy metal‒contaminated soils. A field experiment was conducted to investigate the effects of rice husk biochar (BC) (7.5, 15, and 15 t hm^-2) on Cd availability in soils and accumulation in maize (Zea mays L), soil aggregate structure, and microbial community abundance. The results show that BC treatment promoted the formation of large aggregates (5-8 and 2-5 mm) and enhanced aggregate stability, whereas it decreased the proportion of ≤0.25 mm soil aggregates. The geometric mean diameter and mean weight diameter under BC‒treated soils increased by 9.9%-40.5% and 3.6%-32.7%, respectively, indicating that the stability of soil aggregates increased. Moreover, BC facilitated the migration of Cd from large particles (>0.5 mm aggregates) to small particles (<0.25 mm aggregates). The application of BC decreased diethylenetriamine pentaacetic acid ‒extractable Cd by 17.6%-32.12% in contrast with the control. The amount of Cd in maize was reduced by 56.7%-81.1% for zhengdan958, 52.4%-85.9% for Sanbei218, and 73.7%-90.4% for Liyu16. When compared with the control groups, BC addition significantly (P < 0.05) increased the number of Ace observed, Shannon diversity indices, and the relative abundances of Proteobacteria, Acidobacteria, and Bacteroidetes. Therefore, rice husk BC exhibited a certain feasibility in immobilizing remediation of weakly alkaline Cd‒contaminated soils.

The effects of a combined amendment on growth, cadmium adsorption by five fruit vegetables, and soil fertility in contaminated greenhouse under rotation system

Cadmium (Cd) exposure is related to a multitude of adverse health outcomes because food crops grown on Cd-polluted soil are widely consumed by the public. The present study investigates the different application techniques of a combined amendment (lime + zeolite + biochar + compost, LZBC) for soil Cd immobilization effect on growth performance, Cd uptake by the second season crops, and soil quality in greenhouse vegetable production (GVP) under a rotation system. Five fruit vegetables were cultivated as the second season crop in the same plots which have been used for pakchoi as the first season crop (with or without LZBC application). The results indicated that LZBC with the consecutive application (T3) promoted crops biomass and fruit yield the most, followed by LZBC with the second crop application (T2) and LZBC with the first crop application (T1). LZBC application showed increasing rhizosphere soil pH and improvement in soil fertility of all crops including available nitrogen, available phosphorus, available potassium, organic matter, and cation exchange capacity. LZBC had positive influences on soluble sugar, soluble protein, and vitamin C in edible parts of 5 vegetables. Cd contents in fruit, shoot, and root of eggplant, pimento, cowpea, and tomato except cucumber were reduced by adding LZBC. As for the economic performance, T3 had the highest output/input ratio in general. Overall, these results demonstrated that T3 was dramatically more effective for minimizing health risk, increasing production, and facilitating sustainable utilization of soil under the Cd-contaminated GVP system.

(Im)mobilization of arsenic, chromium, and nickel in soils via biochar: A meta-analysis

Biochar is a promising immobilizing agent of trace elements (TEs) in contaminated soils. However, several contradictory results have been reported regarding the potential of biochar to immobilize arsenic (As), chromium (Cr), and nickel (Ni) in contaminated soils. We conducted a meta-analysis on the published papers since 2006 until 2019 to examine the effects of biochar on the chemical (im)mobilization of As, Cr, and Ni in contaminated soils and to elucidate the major factors that control their interactions with biochar in soil. We synthesized 48 individual papers comprised of a total of 9351 pairwise comparisons and used the statistical tool of Cohen's d as an appropriate effect size for the comparison between means. We found that the application of biochar often increased the As mobilization in soils. Important variables that modulated the biochar effects on As mobilization in soil were pyrolysis temperature and time (ranging between 8 and 16 times when T > 450 °C and t > 1hr), organic matter (7-16 times when SOM<3%) and further site conditions. In contrast to As, biochar efficiently immobilized Cr and Ni in contaminated soils. The extent of the Cr and Ni immobilization was determined by the feedstock (Cr: 7-18 times for agricultural residue-derived biochar; Ni: 13-32 times for woody biomass-derived biochar). Our meta-analysis provides a compilation on the potential of different types of biochar to reduce/increase the mobilization of As, Cr, and Ni in various soils and under different experimental conditions. This study provides important insights on factors that affect biochar's efficiency for the (im)mobilization of As, Cr, and Ni in contaminated soils. While biochar effectively immobilizes Cr and Ni, a proper management of As-polluted soils with pristine biochar is still challenging. This limitation might be overcome by modification of biochar surfaces to exhibit higher surface area and functionality and active sites for surface complexation with TEs.

Passivation and remediation of Pb and Cr in contaminated soil by sewage sludge biochar tubule

Currently, numerous studies have carried out to research the effect of biochars remediation soil heavy metals (HMs) contaminated, but there have been fewer explorations of the effect of biochars tubule on soil HMs remediation. This work aimed to study the effect of passivation and remediation of lead (Pb) and chromium (Cr) contaminated soil after insert sewage sludge biochar (SSB) tubule. The results showed that the high risky fractions of Pb and Cr could be transformed into more stable fractions; also, Pb and Cr total contents are significantly decreased by SSB tubule. The mechanisms include adsorption, ion exchange, complexation, and precipitation which are concluded from the characteristic analysis. Detailly, the passivation of Pb and Cr is better when the moisture is 25% and 35%, respectively [Pb: exchangeable (F1), carbonate bound (F2) decreased by 25.1%, 16.8%, Fe-Mn oxides bound (F3) increased by 18.5%; Cr: F1 decreased by 73.0%, F2, F3, organic matter bound (F4) increased by 13.2%, 23.9%, 30.8%), respectively]. The remediation of Pb and Cr is better when the moisture is 25% and 35%, respectively, (Pb: decreased by 23.3%; Cr: decreased by 38.4%, respectively). The findings showed that the SSB tubule is effective when used for soil HMs contaminated.

Interactive assessment of lignite and bamboo-biochar for geochemical speciation, modulation and uptake of Cu and other heavy metals in the copper mine tailing

This study was designed to examine the combined effect of bamboo-biochar (BC) and water-washed lignite (LGT) at copper mine tailings (CuMT) sites on the concentration of Cu and other metals in pore water (PW), their bioavailability, and change in geochemical speciation. Rapeseed (first cropping-season) and wheat (second cropping-season) were grown for 40-days each and the influence of applied-amendments on both cropping seasons was observed and compared. A significant increase in pH, water holding capacity (WHC), and soil organic carbon (SOC) was observed after the applied amendments in second cropping-seasons. The BC-LGT significantly reduced the concentration of Cu in PW after second cropping seasons; however, the concentration of Pb and Zn were increased with the individual application of biochar and LGT, respectively. BC-LGT and BC-2% significantly reduced the bioavailability of Cu and other HMs in both cropping seasons. The treated-CuMT was subjected to spectroscopic investigation through X-ray photoelectron spectroscopy (XPS), Fourier transform Infrared spectroscopy (FTIR), and X-ray powder diffraction (XRD). The results showed that Cu sorption mainly involved the coordination with hydroxyl and carboxyl functional groups, as well as the co-precipitation or complexation on mineral surfaces, which vary with the applied amendment and bulk amount of Mg, Mn, and Fe released during sorption-process. The co-application of BC-LGT exerted significant effectiveness in immobilizing Cu and other HMs in CuMT. The outcomes of the study indicated that co-application of BC-LGT is an efficacious combination of organic and inorganic materials for Cu adsorption which may provide some new information for the sustainable remediation of copper mine tailing.

Computational study and optimization experiment of nZVI modified by anionic and cationic polymer for Cr(VI) stabilization in soil: Kinetics and response surface methodology (RSM)

Nanoscale zero-valent iron (nZVI) modified by cationic polyquaternium-7 (M550-nZVI) or anionic carboxymethyl cellulose (CMC-nZVI) were freshly synthesized, and followed by the successful applicability for the stabilization of Cr(VI) in soil. Scanning electron microscope (SEM) showed that the sizes of M550-nZVI and CMC-nZVI were 42-170 nm and 66-200 nm, respectively. X-ray diffraction (XRD) confirmed the presence of Fe⁰ and Fe₃C in the as-synthesized composites. The kinetics were well fitted with pseudo-second order model (R² > 0.99), indicating that the process was principally chemical reduction. Additionally, we observed that M550-nZVI had better resistance to oxidation than that of CMC-nZVI. Besides, RSM experiments showed that acetate ion (AA) could promote the Cr(VI) removal but humic acid ion (HA) and carbonate ion (CA) resulted in negative effects. Moreover, the modeling predication revealed that the optimum Cr(VI) removal of 92.44% by CMC-nZVI was available, being 22.52% higher than that of M550-nZVI. In conclusion, this work demonstrated that the inoxidizability of M550-nZVI had a dominant advantage, while CMC-nZVI had the more excellent reactivity than M550-nZVI. We believe that our conducted research work will open the new avenues for effective removal of heavy metals from the soil.

Development of a polymeric nanocomposite as a high performance adsorbent for Pb(II) removal from water medium: Equilibrium, kinetic and antimicrobial activity

In the present study, starch based ZnO nancomposite (CSt-ZnO) was synthesized for the efficient removal of Pb(II) ions from aqueous medium. The structure and morphology of CSt-ZnO nancomposite was characterized using SEM, FTIR, TGA, BET, XPS and zeta potential measurements. The effect of contact time, pH, temperature and initial concentration of Pb(II) on the adsorption was studied. The optimum parameters for maximum Pb(II) removal were time-120 min; pH-6; temperature-318 K and C_o-20 ppm. The maximum Langmuir adsorption capacity of CSt-ZnO nancomposite was 256.4 mg/g at 298 K. With increasing the temperature from 298 K to 318 K, the maximum adsorption quantity (q_m) was improved from 256.4 to 476 mg/g which showed the endothermic nature of Pb(II) adsorption on CSt-ZnO nanocomposite. The sorption isotherm and kinetics model fitting studies, confirmed that data fit well to Freundlich isotherm and pseudo-first-order kinetics models, respectively. Thermodynamic studies inferred a spontaneous and endothermic nature of adsorption. Moreover, the adsorption capacity was 68% even after four adsorption-desorption cycles which revealed the reusable performance of CSt-ZnO was well. The antimicrobial activity of CSt-ZnO nanocomposite was also examined against S. aureus and E. coli.

Study on the bio-oil characterization and heavy metals distribution during the aqueous phase recycling in the hydrothermal liquefaction of As-enriched Pteris vittata L

The hydrothermal liquefaction (HTL) of As enriched Pteris vittata L. (PVL, hyper-accumulator biomass) was performed with the recycled aqueous phase as reaction medium, aiming to dispose the biomass with high water content and produce high-quality bio-oil. After three times of aqueous phase recycling at 275 °C, 30 min, the bio-oil yield increased to 30.32% from 21.54% and the higher heating value (HHV, 28.51 MJ/kg) of the bio-oil was higher than that of the bio-oil from HTL with pure water (26.80 MJ/kg). The main compounds detected in bio-oils were phenols, ketones, hydrocarbons, and aldehydes. Acetic acid (17.21-24.77 mg/mL) was dominant in the aqueous phases, resulting in the low pH (4.31-4.89). The heavy metals (Cu, Pb, Zn, Cd) mainly remained in bio-char whereas As was transferred to aqueous phase. Thus, HTL by aqueous phase recycling could be a promising way for PVL treatment to obtain high-quality bio-oil and arsenic recovery.