Effective removal of excessive fluoride from aqueous environment using activated pods of Bauhinia variegata: Batch and dynamic analysis

The model and mechanism of adsorptive technologies for wastewater containing fluoride: A review

With the continuous development of society, industrialization, and human activities have been producing more and more pollutants. Fluoride discharge is one of the main causes of water pollution. This review summarizes various commonly used and effective fluoride removal technologies, including ion exchange technology, electrochemical technology, coagulation technology, membrane treatment, and adsorption technology, and points out the outstanding advantages of adsorption technology. Various commonly used fluoride removal techniques as well as typical adsorbent materials have been discussed in published papers, however, the relationship between different adsorbent materials and adsorption models has rarely been explored, therefore, this paper categorizes and summarizes the various models involved in static adsorption, dynamic adsorption, and electrosorption fluoride removal processes, such as pseudo-first-order and pseudo-second-order kinetic models, Langmuir and Freundlich isotherm models, Thomas and Clark dynamic adsorption models, including the mathematical equations of the corresponding models and the significance of the models are also comprehensively summarized. Furthermore, this comprehensive discussion delves into the fundamental adsorption mechanisms, quantification of maximum adsorption capacity, evaluation of resistance to anion interference, and assessment of adsorption regeneration performance exhibited by diverse adsorption materials. The selection of the best adsorption model not only predicts the adsorption performance of the adsorbent but also provides a better description and understanding of the details of each part of the adsorption process, which facilitates the adjustment of experimental conditions to optimize the adsorption process. This review may provide some guidance for the development of more cost-effective adsorbent materials and adsorption processes in the future.

Preparation of aluminium-hydroxide-modified diatomite and its fluoride adsorption mechanism

As the current excessive accumulation of fluoride (F^-) in the environment can be hazardous to human health, it is essential to remove fluoride from wastewater. In this study, diatomite (DA) was used as a raw material and modified using aluminum hydroxide (Al-DA) for use in the adsorption of F^- from water bodies. SEM, EDS, XRD, FTIR, and Zeta potential characterization analyses were carried out; adsorption tests and kinetic fitting were performed, and the effects of pH, dosing quantity, and presence of interfering ions on the adsorption of F^- by the materials were investigated. The results show that the Freundlich model effectively describes the adsorption process of F^- on DA, which therefore involves adsorption-complexation interactions; however, the Langmuir model effectively describes the adsorption process of F^- on Al-DA, corresponding to unimolecular layer adsorption mainly via ion-exchange interactions, that is, adsorption is dominated by chemisorption. Aluminum hydroxide was shown to be the main species involved in F^- adsorption. The efficiency of F^- removal by DA and Al-DA was over 91% and 97% for 2 h, and the adsorption kinetics were effectively fit by the quasi-secondary model, suggesting that chemical interactions between the absorbents and F^- control the adsorption process. The adsorption of F^- was highly dependent on the pH of the system, and the maximum adsorption performance was obtained at pH 6 and 4. The optimal dosage of DA and Al-DA was 4 g/L. Even in the presence of interfering ions, the removal of F^- on Al-DA reached 89%, showing good selectivity. XRD and FTIR studies showed that the mechanism of F^- adsorption on Al-DA involved ion exchange and the formation of F-Al bonds.

Adsorptive Removal of Alizarin Red S onto Sulfuric Acid-Modified Avocado Seeds: Kinetics, Equilibrium, and Thermodynamic Studies

The present work evaluates the synthesis of a novel, inexpensive, and environmentally friendly chemically-treated avocado seed powder (CTASP) as an adsorbent in removing alizarin red S (ARS) from synthetic solution. By using a set of analytical techniques, including FTIR, XRD, EDX, RS, and SEM, the adsorbent was characterized for its physical and chemical properties. Batch study experiments were conducted to determine the effectiveness of the CTASP as an adsorbent. The maximum adsorption capacity of 67.08 mgg-1 was attained at optimum conditions of 3 gL-1 adsorbent dosage, pH 3, contact time of 30 min, and at temperature 303 K. After 30 minutes, the equilibrium was reached, and the experimental data was explained for isotherm, kinetic, and thermodynamic processes. The results indicated that pseudo-second-order kinetics and the Freundlich isotherm were the best fits for the data. The findings of the analysis of the thermodynamic parameters for the process showed that the system was an exothermic and spontaneous. According to the desorption studies, 0.1 M NaOH can be utilized as a separating reagent to desorb 90.53% of ARS that was adsorbed. Regeneration experiments were conducted to make the process more practical and affordable, and it was discovered that the CTASP adsorbent could be successfully regenerated up to four times. In comparison with other adsorbents, the current low-cost adsorbent had the exceptional regenerative capability and delivered multilayer adsorption capacity. Additionally, it has been demonstrated that the CTASP is an effective material for the detoxification of ARS dye from wastewater.

Sodium alginate/magnetic hydrogel microspheres from sugarcane bagasse for removal of sulfamethoxazole from sewage water: Batch and column modeling

Magnetic carbon were synthesized from sugarcane bagasse using hydrothermal carbonization followed by thermal activation was converted to solid state as beads (hydrogels SACFe) using sodium alginate and applied as adsorbent in removal sulfamethoxazole in batch and column mode. From adsorption parameter analysis it was confirmed that 0.6 g L^-1 SACFe was effective in removing 50 mg L^-1 of SMX at pH 6.2. Sorption of SMX on SACFe beads followed Elovich kinetics and Freundlich isotherm. It was further confirmed that sorption occurred on heterogeneous surface of SACFe beads with chemisorption as rate limiting step. Maximum adsorption capacity was obtained as 58.439 mg g^-1 pH studies revealed that charged assisted hydrogen bonding, EDA interactions are some of the mechanism that favoured removal of SMX. From column studies it was found that bead height of 2 cm and flow rate of 1.5 mL min^-1 found to be best in removing pollutant. Thomas model fitted better the experimental data stating that improved interaction between adsorbent and adsorbate act as major driving force tool in obtaining maximum sorption capacity. Breakthrough curve was completely affected by varied flow rate and bed height. Column adsorption was effective in reducing COD and BOD levels of sewage which are affected by toxic pollutants and miscellaneous compounds. Feasibility analysis showed that SACFe beads could be employed for real-time applications as it is cost, energy effective and easy recovery.

Applications of biomass-based materials to remove fluoride from wastewater: A review

Fluoride is one of the essential trace elements for the human body, but excessive fluoride will cause serious environmental and health problems. This paper summarizes researches on the removal of fluoride from aqueous solutions using newly developed or improved biomass materials and biomass-like organic materials in recent years. These biomass materials are classified into chitosan, microorganisms, lignocellulose plant materials, animal attribute materials, biological carbonized materials and biomass-like organic materials, which are explained and analyzed. By comparing adsorption performance and mechanism of adsorbents for removing fluoride, it is found that carbonizing materials and modifying adsorbents with metal ions are more beneficial to improving adsorption efficiency and the adsorption mechanisms are various. The adsorption capacities are still considerable after regeneration. This paper not only reviews the properties of these materials for fluoride removal, but also focuses on the comparison of materials performance and fluoride removal mechanism. Herein, by discussing the improved adsorption performance and research technology development of biomass materials and biomass-like organic materials, various innovative ideas are provided for adsorbing and removing contaminants.

Nanocomposite of Ceria and Trititanate Nanotubes as an Efficient Defluoridating Material for Real-Time Groundwater: Synthesis, Regeneration, and Leached Metal Risk Assessment

Ceria-incorporated trititanate nanotube composite (CTNC) was synthesized via a simple two-step wet chemical route for efficient fluoride removal not only from synthetic water but also from groundwater. The synthesized nanomaterial was systematically characterized for its physical and chemical properties. CTNC was shown to be highly porous with a surface area of 267 m²/g. The high surface area exposed majority of its adsorption sites, that is, surface hydroxyl groups, for fluoride removal. The plausible adsorption mechanism deduced based on FTIR and XPS data showed that ion exchange between the surface hydroxyl groups and the fluoride ions in water played a vital role in defluoridation by CTNC. A novel approach was used to quantify the adsorption sites with the use of BET and thermogravimetric analysis. TEM images confirmed the morphology of CTNC to be nanotubes decorated with ceria particles. The analysis of treated water samples for the metal ion content was carried out by an ICP-MS technique. CTNC exhibited characteristics of an ideal adsorbent such as high adsorption capacity, faster kinetics, pH independent adsorption, good regeneration, and negligible leaching of metal ions into the effluent. These attractive characteristics enabled the applicability of CTNC for real-time use.

High-performance lanthanum-based metal-organic framework with ligand tuning of the microstructures for removal of fluoride from water

Excess fluoride in water poses a threat to ecology and human health, which has attracted global attention. In this study, a series of lanthanum-based metal-organic frameworks (La-MOFs) were synthesized by varying the organic ligands (i.e., terephthalic acid (BDC), trimesic acid (BTC), biphenyl-4,4-dicarboxylic acid (BPDC), 2,5-dihydroxyterephthalic acid (BHTA), and 1,2,4,5-benzenetetracarboxylic acid (PMA)) to control the microscopic structure of the MOFs and subsequently apply them for the removal of fluoride in water. The maximum capture capacities of La-BTC, La-BPDC, La-BHTA, La-PMA, and La-BDC at 298 K are 105.2, 125.9, 145.5, 158.9, and 171.7 mg g^-1, respectively. The adsorption capacity is greater than most reported adsorbents. The adsorption isotherms of La-MOFs for fluoride are well fit to the Langmuir isotherm model. In addition, the adsorption kinetics of La-BTC, La-BPDC, La-BHTA, La-PMA, and La-BDC follows the pseudo-second-order kinetic model, and the kinetic rate-limiting step of adsorption is chemical adsorption. Thermodynamics revealed that temperature is favorable for the adsorption of fluoride. Meanwhile, La-BTC, La-BPDC, La-BHTA, La-PMA, and La-BDC are suitable for the removal of fluoride in a relatively wide pH range (4.0-9.0). Simultaneously, from X-ray photoelectron spectroscopy (XPS) and Fourier transform infrared spectroscopy (FTIR) analysis, electrostatic attraction and ligand exchange are identified as the main action mechanisms for the adsorption of fluoride of La-MOFs. The prepared La-MOFs are used as efficient adsorbents for removal of fluoride in actual water, indicating that they have great potential in removing fluoride in real and complex environmental water. This work provides a new strategy for designing adsorbents with adjustable microstructure and expected function to effectively recover fluorosis in water.

Comprehensive and critical appraisal of plant-based defluoridation from environmental matrices

Fluoride is recognized as one of the global environmental threats because of its non-biodegradable nature and long-term persistence in the environment. This has created the dire need to explore various defluoridation techniques (membrane process, adsorption, precipitation, reverse osmosis, ion exchange, and electrocoagulation). Owing to their cost ineffectiveness and high operational costs, these technologies failed to find any practical utility in fluoride remediation. Comparatively, defluoridation techniques involving the use of low-cost plant-derived adsorbents and fluoride phytoremediators are considered better alternatives. Through this review, an attempt has been made to critically synthesize information about various plant-based bioadsorbents and hyperaccumulators from existing literature. Moreover, mechanisms underlying the fluoride adsorption and accumulation by plants have been thoroughly discussed that will invigorate the researchers to develop novel ideas about process/product modifications to further enhance the removal potential of the adsorbents and plants. Literature survey unravels that various low-cost plant-derived adsorbents have shown their efficacy in defluoridation, yet there is an urgent need to explore their pragmatic application on a commercial scale.

Sorbent-based devices for the removal of spilled oil from water: a review

Always, oil spills do cause serious and dire consequences for the environment, nature, and society that it consumes much time and socio-economic resources to overcome such consequences. Oil spills, hence, posed a big challenge in searching the advanced technologies and devices to recover spilled oil rapidly and efficiently. Indeed, sorbents have been found to play an extremely critical role in the spilled-oil remediation processes. Recently, a large number of various advanced sorbents and sorbent-based oil-collecting devices/technologies have been developed to enhance the oil-recovery capacity. Therefore, it is necessary to have a comprehensive assessment of the application of sorbent-based oil-collecting devices/technologies in recovering spilled oil. Due to this reason, this paper aims to provide a comprehensive review of the advanced technologies of the combination of sorbents and oil-collecting devices in the oil cleanup strategies. Two main oil-collecting devices such as booms and skimmers that could conjunct with sorbents were critically evaluated on the basis of the applicability and technological features, indicating that the capacity of oil spill recovery could achieve 90%. Moreover, oil-storage and oil-collecting devices were also completely mentioned. Last but not least, technical directions, concerns over the application of sorbents in oil recovery, and existing challenges relating to storage, transport, and disposal of used sorbents were discussed in detail. In the future, the automatic process of spilled oil recovery with the conjunction between advanced devices and environmentally friendly high-efficiency sorbents should be further investigated to minimize the environmental impacts, reduce the cost, as well as maximize the collected oil spill.