Science-society-policy interface for microplastic and nanoplastic: Environmental and biomedical aspects

Forecasting municipal solid plastic waste generation and management policy using system dynamics: a case study of Khulna City in Bangladesh

A comprehensive analysis of municipal solid plastic waste (MSPW) management while emphasizing plastic pollution severity in coastal cities around the world is mandatory to alleviate the augmenting plastic waste footprint in nature. Thus, decision-makers' persuasion for numerous management solutions of MSPW flow-control can be met through meditative systematic strategies at the regional level. To forecast solutions focused on systematic policies, an agent-based system dynamics (ASD) model has been developed and simulated from 2023 to 2040 while considering significant knit parameters for MSPW management of Khulna City in Bangladesh. Baseline simulation results show that per-capita plastic waste generation will increase to 11.6 kg by 2040 from 8.92 kg in 2023. Eventually, the landfilled quantity of plastic waste has accumulated to 70,000 tons within 18 years. Moreover, the riverine discharge has increased to 834 tons in 2040 from a baseline quantity of 512 tons in 2023. So the plastic waste footprint index (PWFI) value rises to 24 by 2040. Furthermore, the absence of technological initiatives is responsible for the logarithmic rise of non-recyclable plastic waste to 1.35*1000=1350 tons. Finally, two consecutive policy scenarios with baseline factors such as controlled riverine discharge, increased collection and separation of plastic waste, expansion of recycle business, and locally achievable plastic conversion technologies have been simulated. Therefore, policy 2, with 69% conversion, 80% source separation, and 50% riverine discharge reduction of MSPW, has been found adequate from a sustainability perspective with the lowest PWFI ranges of 3.97 to 1.07 alongside a per-capita MSPW generation of 7.63 to 10 kg from 2023 till 2040.

Understanding the impact of nanoplastics on reproductive health: Exposure pathways, mechanisms, and implications

Microplastic pollution is a pressing global environmental concern with particular urgency surrounding the issue of nanoplastic particles. Plastic products exhibit a remarkable persistence in natural ecosystems, resisting easy degradation. Nanoplastics, characterized by their diminutive size, possess distinct properties when compared to their larger counterparts, which could potentially render them more ecologically detrimental. Microplastics themselves serve as carriers for toxic and hazardous substances, such as plastic additives, that enter and persist in the environmental cycle. Importantly, nanoplastics exhibit enhanced bioavailability upon entering the food chain. Notably, studies have demonstrated the adverse effects of nanoplastics on the reproductive function of aquatic organisms, and evidence of micro- and nanoplastics have emerged within human reproductive organs, including the placenta. However, a knowledge gap persists regarding the impacts of nanoplastics on the reproductive systems of mammals and, indeed, humans. This paper aims to elucidate the less frequently discussed sources and distribution of nanoplastics in the environment, along with the pathways of human exposure. We also emphasize the extent to which nanoplastics accumulate within the reproductive systems of organisms. Subsequently, we present an in-depth analysis of the effects of nanoplastics and their associated contaminants on mammalian and human reproductive health. The mechanisms through which nanoplastics contribute to reproductive disorders are comprehensively explored, highlighting their potential to disrupt endocrine levels in mammals and humans. Additionally, we scrutinize and discuss studies on biotoxicity of nanoplastics, offering insights into potential areas for future research.

Internalization and toxicity of polystyrene nanoplastics on inmortalized human neural stem cells

Global plastic production has increased exponentially in recent decades, and a significant part of it persists in the environment, where it degrades into microplastics and nanoplastics (MPs and NPs). These can enter in humans by ingestion, inhalation, and dermal routes, and there is scientific evidence that they are able to reach the systemic circulation and penetrate and accumulate in various tissues and organs. Neurodevelopmental toxicity of NPs is one of the most worrying effects, as they can cross the blood-brain barrier. In the following study, we analyzed, by transmission electron microscopy, the in vitro uptake of 30-nm polystyrene nanoplastics (PS-NPs) into human neural stem cells (NSCs), their accumulation and subcellular localization within the cell. Furthermore, we studied the effects of different concentrations of PS-NPs on cell death, proliferation, and cell differentiation using immunocytochemistry and quantitative real time PCR for specific markers. This study demonstrated that PS-NPs were able to enter the cell, probably by endocytosis, accumulate, and aggregated in human NSCs, without being detected in the nucleus, causing cell death by apoptosis and decreased cell proliferation. This study provides new insights into the interaction and effects of PS-NPs in human NSC and supports the scientific evidence for the involvement of nanoplastic in neurodevelopmental disorders.

Science-based evidence on pathways and effects of human exposure to micro- and nanoplastics

Human exposure to plastic particles has raised great concern among all relevant stakeholders involved in the protection of human health due to the contamination of the food chain, surface waters, and even drinking water as well as due to their persistence and bioaccumulation. Now more than ever, it is critical that we understand the biological fate of plastics and their interaction with different biological systems. Because of the ubiquity of plastic materials in the environment and their toxic potential, it is imperative to gain reliable, regulatory-relevant, science-based data on the effects of plastic micro- and nanoparticles (PMNPs) on human health in order to implement reliable risk assessment and management strategies in the circular economy of plastics. This review presents current knowledge of human-relevant PMNP exposure doses, pathways, and toxic effects. It addresses difficulties in properly assessing plastic exposure and current knowledge gaps and proposes steps that can be taken to underpin health risk perception, assessment, and mitigation through rigorous science-based evidence. Based on the existing scientific data on PMNP adverse health effects, this review brings recommendations on the development of PMNP-specific adverse outcome pathways (AOPs) following the AOP Users' Handbook of the Organisation for Economic Cooperation and Development (OECD).

Microplastics as vectors of other contaminants: Analytical determination techniques and remediation methods

The ubiquitous and persistent presence of microplastics (MPs) in aquatic and terrestrial ecosystems has raised global concerns due to their detrimental effects on human health and the natural environment. These minuscule plastic fragments not only threaten biodiversity but also serve as vectors for contaminants, absorbing organic and inorganic pollutants, thereby causing a range of health and environmental issues. This review provides an overview of microplastics and their effects. This work highlights available analytical techniques for detecting and characterizing microplastics in different environmental matrices, assessing their advantages and limitations. Additionally, this review explores innovative remediation approaches, such as microbial degradation and other advanced methods, offering promising prospects for combatting microplastic accumulation in contaminated environments. The focus on environmentally-friendly technologies, such as the use of microorganisms and enzymes for microplastic degradation, underscores the importance of sustainable solutions in plastic pollution management. In conclusion, this article not only deepens our understanding of the microplastic issue and its impact but also advocates for the urgent need to develop and implement effective strategies to mitigate this critical environmental challenge. In this context, the crucial role of advanced technologies, like quantitative Nuclear Magnetic Resonance spectroscopy (qNMR), as promising tools for rapid and efficient microplastic detection, is emphasized. Furthermore, the potential of the enzyme PETase (polyethylene terephthalate esterase) in microplastic degradation is examined, aiming to address the growing plastic pollution, particularly in saline environments like oceanic ecosystems. These innovations offer hope for effectively addressing microplastic accumulation in contaminated environments and minimizing its adverse impacts.

Microplastic pollution in water environment of typical nature reserves and scenery districts in southern China

Microplastics were frequently detected in the ocean, freshwater environment and wastewater treatment plants. This study aims to fill up the knowledge gap of microplastic distribution in nature reserves and scenery districts. Microplastic samples were collected, the distribution characteristics were analyzed with a stereoscopic microscope and a Fourier transform infrared spectrometer, and the ecological risks of microplastic pollution were calculated. Microplastics were detected in all the collected water samples and the average abundances of microplastics in the surface water of eleven investigated nature reserves and scenery districts ranged from 542 to 5500 items/m3. The degrees of microplastic pollution of all the surveyed nature reserves and scenery districts were classified as hazard level I. Fiber microplastics represented the largest average proportion (67.4 %) and 91.7 % of the detected microplastics were smaller than 2 mm. Corresponding to the frequent detection of fiber microplastics, cotton was the most abundant (25.5 %) polymer type of the suspected microplastics, followed by polyamide (PA, 20.6 %), polyester (PET, 17.0 %), and cellulose (15.6 %). For the ecological risk of the microplastic polymers, six, two and three nature reserves and scenery districts were defined to be at hazard level I, II and III, respectively. In brief, microplastic pollution occurred in all the surveyed nature reserves/scenery districts and posed different degrees of ecological risks.

Teratogenic effects of environmental concentration of plastic particles on freshwater organisms

Given the widespread presence of plastics, especially in micro- and nanoscale sizes, in freshwater systems, it is crucial to identify a suitable model organism for assessing the potential toxic and teratogenic effects of exposure to plastic particles. Until now, the early life stage of freshwater organisms and the regeneration capacity in relation to plastic particles exposure is a still poorly investigated topic. In this study, we examine the teratogenic effect on diatom Cocconeis placentula and cnidarian Hydra vulgaris under controlled exposure conditions of poly(styrene-co-methyl methacrylate) (P(S-co-MMA)) particles. Significant effects were observed at the lowest concentrations (0.1 μg/L). A significant increase in the teratological frequency in C. placentula and a significant decrease in the regeneration rate in H. vulgaris were found at the lowest concentration. The delay in hydra regeneration impaired the feeding capacity and tentacles reactivity at 96 h of exposure. No effects on diatom growth were observed upon exposure to P(S-co-MMA) particles (0.1, 1, 100, 10,000 μg/L) for 28 days and these findings agree with other studies investigating algal growth. The application of the Teratogenic Risk Index, modified for diatoms, highlighted a moderate risk for the lowest concentration evaluating C. placentula and low risk at the lowest and the highest concentrations considering H. vulgaris. This study suggests the importance of testing organisms belonging to different trophic levels as diverse teratogenic effects can be found and the need to evaluate environmentally relevant concentrations of plastic particles.

Interactions between titanium dioxide nanoparticles and polyethylene microplastics: Adsorption kinetics, photocatalytic properties, and ecotoxicity

The present study investigated the adsorption mechanism of titanium dioxide nanoparticles (nTiO₂) on polyethylene microplastics (MPs) and the resulting photocatalytic properties. This effort was supported by ecotoxicological assessments of MPs with adsorbed nTiO₂ on the immobility and behaviour of Daphnia magna in presence and absence of UV irradiation. The results showed that nTiO₂ were rapidly adsorbed on the surface of MPs (72% of nTiO₂ in 9 h). The experimental data fit well with the pseudo-second order kinetic model. Both suspended nTiO₂ and nTiO₂ immobilized on MPs exhibited comparable photocatalytic properties, with the latter showing a lower effect on Daphnia mobility. A likely explanation is that the suspended nTiO₂ acted as a homogeneous catalyst under UV irradiation and generated hydroxyl radicals throughout the test vessel, whereas the nTiO₂ adsorbed on MPs acted as a heterogeneous catalyst and generated hydroxyl radicals only locally and thus near the air-water interface. Consequently, Daphnia, which were hiding at the bottom of the test vessel, actively avoided exposure to hydroxyl radicals. These results suggest that the presence of MPs can modulate the phototoxicity of nTiO₂ - at least the location at which it is active - under the studied conditions.

Effects of Micro(nano)plastics on the reproductive system: A review

Microplastics (100nm-5 mm) and nanoplastics (1-100 nm) are collectively referred to as micro(nano)plastics (MNPs), which are refractory to degradation, easy to migration, small in size, strong in adsorption, and can widely present in human living environment. A number of studies have confirmed that MNPs can be exposed to the human body through a variety of routes, and can penetrate various barriers to enter the reproductive system, suggesting that MNPs may pose potential harm to human reproductive health. Current studies most were limited to phenotypic studies and their subjects were basically lower marine organisms and mammals. Therefore, in order to provide theoretical base for further exploring the effects of MNPs on the human reproductive system, this paper searched the relevant literature at home and abroad, mainly analyzed rodent experiments, and concluded that the main exposure routes of MNPs are dietary intake, air inhalation, skin contact and medical plastics. After entering the reproductive system, MNPs produce reproductive toxicity mainly through oxidative stress, inflammation, metabolic disorders, cytotoxicity and other mechanisms. More work is required to comprehensively identify the exposure routes, improve the detection methods to evaluate the effective exposure and deeply study the specific mechanisms of toxic effects, withing the aim of conducting relevant studies at the population level in the next step.

Insights into Anthropogenic Micro- and Nanoplastic Accumulation in Drinking Water Sources and Their Potential Effects on Human Health

Anthropogenic microplastics (MPs) and nanoplastics (NPs) are ubiquitous pollutants found in aquatic, food, soil and air environments. Recently, drinking water for human consumption has been considered a significant pathway for ingestion of such plastic pollutants. Most of the analytical methods developed for detection and identification of MPs have been established for particles with sizes > 10 μm, but new analytical approaches are required to identify NPs below 1 μm. This review aims to evaluate the most recent information on the release of MPs and NPs in water sources intended for human consumption, specifically tap water and commercial bottled water. The potential effects on human health of dermal exposure, inhalation, and ingestion of these particles were examined. Emerging technologies used to remove MPs and/or NPs from drinking water sources and their advantages and limitations were also assessed. The main findings showed that the MPs with sizes > 10 μm were completely removed from drinking water treatment plants (DWTPs). The smallest NP identified using pyrolysis-gas chromatography-mass spectrometry (Pyr-GC/MS) had a diameter of 58 nm. Contamination with MPs/NPs can occur during the distribution of tap water to consumers, as well as when opening and closing screw caps of bottled water or when using recycled plastic or glass bottles for drinking water. In conclusion, this comprehensive study emphasizes the importance of a unified approach to detect MPs and NPs in drinking water, as well as raising the awareness of regulators, policymakers and the public about the impact of these pollutants, which pose a human health risk.

Long-term exposure to nanoplastics alters molecular and functional traits related to the carcinogenic process

Micro/nanoplastics (MNPLs) are considered emergent pollutants widely spread over all environmental compartments. Although their potential biological effects are being intensively evaluated, many doubts remain about their potential health effects in humans. One of the most underdeveloped fields is the determination of the potential tumorigenic risk of MNPLs exposure. To shed light on this topic, we have designed a wide battery of different hallmarks of cancer applied to prone-to-transformed progress MEF cells exposed to polystyrene nanoplastics (PSNPLs) in the long term (6 months). Interestingly, most of the evaluated hallmarks of cancer are exacerbated after exposure, independently if they are associated with an early tumoral phenotype (changes in stress-related genes, or microRNA deregulation), advanced tumoral phenotype (growing independently of anchorage ability, and migration capacity), or an aggressive tumoral phenotype (invasion potential, changes in pluripotency markers, and ability to grow to form tumorspheres). This set of obtained data constitutes a relevant warning on the potential carcinogenic risk associated with long-term exposures to MNPLs, specifically that induced by the PSNPLs evaluated in this study.

Advanced microplastic monitoring using Raman spectroscopy with a combination of nanostructure-based substrates

Micro(nano)plastic (MNP) pollutants have not only impacted human health directly, but are also associated with numerous chemical contaminants that increase toxicity in the natural environment. Most recent research about increasing plastic pollutants in natural environments have focused on the toxic effects of MNPs in water, the atmosphere, and soil. The methodologies of MNP identification have been extensively developed for actual applications, but they still require further study, including on-site detection. This review article provides a comprehensive update on the facile detection of MNPs by Raman spectroscopy, which aims at early diagnosis of potential risks and human health impacts. In particular, Raman imaging and nanostructure-enhanced Raman scattering have emerged as effective analytical technologies for identifying MNPs in an environment. Here, the authors give an update on the latest advances in plasmonic nanostructured materials-assisted SERS substrates utilized for the detection of MNP particles present in environmental samples. Moreover, this work describes different plasmonic materials-including pure noble metal nanostructured materials and hybrid nanomaterials-that have been used to fabricate and develop SERS platforms to obtain the identifying MNP particles at low concentrations. Plasmonic nanostructure-enhanced materials consisting of pure noble metals and hybrid nanomaterials can significantly enhance the surface-enhanced Raman scattering (SERS) spectra signals of pollutant analytes due to their localized hot spots. This concise topical review also provides updates on recent developments and trends in MNP detection by means of SERS using a variety of unique materials, along with three-dimensional (3D) SERS substrates, nanopipettes, and microfluidic chips. A novel material-assisted spectral Raman technique and its effective application are also introduced for selective monitoring and trace detection of MNPs in indoor and outdoor environments.