Reduction of nitrate using biochar synthesized by Co-Pyrolyzing sawdust and iron oxide

Effects of adding corn steep liquor on bacterial community composition and carbon and nitrogen transformation during spent mushroom substrate composting

BACKGROUND

Carbon and nitrogen are essential energy and nutrient substances in the composting process. Corn steep liquor (CSL) is rich in soluble carbon and nitrogen nutrients and active substances and is widely used in the biological industry. Nonetheless, limited research has been done on the effect of CSL on composting. This work firstly reveals the effect of adding CSL to bacterial community composition and carbon and nitrogen conversion during composting. This study provides the choice of auxiliary materials for the spent mushroom substrate compost (SMS) and some novel knowledge about the effect of bacterial community on C and N cycling during composting of SMS and CSL. Two treatments were set up in the experiment: 100% spent mushroom substrate (SMS) as CK and SMS + 0.5% CSL (v/v) as CP.

RESULTS

The results showed that the addition of CSL enhanced the initial carbon and nitrogen content of the compost, altered the bacterial community structure, and increased the bacterial diversity and relative abundance, which might be beneficial to the conversion and retention of carbon and nitrogen in the composting process. In this paper, network analysis was used to screen the core bacteria involved in carbon and nitrogen conversion. In the CP network, the core bacteria were divided into two categories, synthesizing and degrading bacteria, and there were more synthesizing bacteria than degrading bacteria, so the degradation and synthesis of organic matter were carried out simultaneously, while only degrading bacteria were found in the CK network. Functional prediction by Faprotax identified 53 groups of functional bacteria, among which 20 (76.68% abundance) and 14 (13.15% abundance) groups of functional bacteria were related to carbon and nitrogen conversion, respectively. Adding CSL stimulated the compensatory effect of core and functional bacteria, enhanced the carbon and nitrogen transformation ability, stimulated the activity of low-abundance bacteria, and reduced the competitive relationship between the bacterial groups. This may be why the addition of CSL accelerated the organic matter degradation and increased carbon and nitrogen preservation.

CONCLUSIONS

These findings indicate that the addition of CSL promoted the cycling and preservation of carbon and nitrogen in the SMS composts, and the addition of CSL to the compost may be an effective way to dispose of agricultural waste.

Advances in iron-based electrocatalysts for nitrate reduction

Excessive nitrate has been a critical issue in the water environment, originating from the burning of fossil fuels, inefficient use of nitrogen fertilizers, and discharge of domestic and industrial wastewater. Among the effective treatments for nitrate reduction, electrocatalysis has become an advanced technique because it uses electrons as green reducing agents and can achieve high selectivity through cathode potential control. The effectiveness of electrocatalytic nitrate reduction (NO₃RR) mainly lies in the electrocatalyst. Iron-based catalysts have the advantages of high activity and low cost, which are well-used in the field of electrocatalytic nitrates. A comprehensive overview of the electrocatalytic mechanism and the iron-based materials for NO₃RR are given in terms of monometallic iron-based materials as well as bimetallic and oxide iron-based materials. A detailed introduction to NO₃RR on zero valent iron, single-atom iron catalysts, and Cu/Fe-based bimetallic electrocatalysts are provided, as they are essential for the improvement of NO₃RR performance. Finally, the advantages of iron-based materials for NO₃RR and the problems in current applications are summarized, and the development prospects of efficient iron-based catalysts are proposed.

Synergistic Cr(VI) reduction and adsorption of Cu(II), Co(II) and Ni(II) by zerovalent iron-loaded hydroxyapatite

Multi-metal contaminated soil, such as Cr(VI), Cu(II), and Co(II), still challenge the environmental remediation. In this work, zerovalent iron-loaded hydroxyapatite (ZVI/HAP) was first applied to simultaneously adsorb multi-metal in contaminated soil. During the remediation, the co-existing Cu(II), Ni(II), and Co(II) were adsorbed and precipitated onto ZVI/HAP. This "spontaneous deposition" simultaneously achieved the adsorption of the cationic metals and improved the isoelectric point of ZVI/HAP to 4.83 from 1.59, thus significantly alleviating the electronegativity to enhance the capture and reduction efficiency of Cr(VI). The application of ZVI/HAP resulted in the reduction of more than 99% of total Cr(VI) in contaminated soil, and the almost complete adsorption of water-soluble and DTPA-extractable Cu, Ni and Co within 20 d. Based on the sequential extraction and risk reduction assessment, soil Cr, Cu, Ni, and Co speciation was transformed from an unstable state (exchangeable and carbonate-bound fractions) to a relatively stable state, reducing the risk of heavy metals in contaminated soil significantly. This study developed an efficient strategy for the remediation of multi-metal contaminated soil.

Phosphate Removal Mechanisms in Aqueous Solutions by Three Different Fe-Modified Biochars

Iron-modified biochar can be used as an environmentally friendly adsorbent to remove the phosphate in wastewater because of its low cost. In this study, Fe-containing materials, such as zero-valent iron (ZVI), goethite, and magnetite, were successfully loaded on biochar. The phosphate adsorption mechanisms of the three Fe-modified biochars were studied and compared. Different characterization methods, including scanning electron microscopy/energy-dispersive spectrometry (SEM-EDS), Fourier transform infrared spectroscopy (FTIR), and X-ray photoelectron spectroscopy (XPS), were used to study the physicochemical properties of the biochars. The dosage, adsorption time, pH, ionic strength, solution concentration of phosphate, and regeneration evaluations were carried out. Among the three Fe-modified biochars, biochar modified by goethite (GBC) is more suitable for phosphate removal in acidic conditions, especially when the pH = 2, while biochar modified by ZVI (ZBC) exhibits the fastest adsorption rate. The maximum phosphate adsorption capacities, calculated by the Langmuir-Freundlich isothermal model, are 19.66 mg g^-1, 12.33 mg g^-1, and 2.88 mg g^-1 for ZBC, GBC, and CSBC (biochar modified by magnetite), respectively. However, ZBC has a poor capacity for reuse. The dominant mechanism for ZBC is surface precipitation, while for GBC and CSBC, the major mechanisms are ligand exchange and electrostatic attraction. The results of our study can enhance the understanding of phosphate removal mechanisms by Fe-modified biochar and can contribute to the application of Fe-modified biochar for phosphate removal in water.

Boosting photocatalytic reduction of nitrate to ammonia enabled by perovskite/biochar nanocomposites with oxygen defects and O-containing functional groups

Photocatalytic ammonia synthesis from waste nitrate has emerged as a promising strategy in water treatment; however, the conversion and selectivity still remain a great challenge. Herein, recyclable magnetic perovskite (LaFeO₃)/biochar nanocomposites were successfully synthesized by the co-pyrolysis of the lotus biomass and Fe/La salts without extra organic complexants. Results showed that the lotus interacted with the iron ions (Fe³⁺) and the lanthanum ions (La³⁺) changing the surface and structural characteristics of catalysts. Oxygen defects of LaFeO₃ were enhanced due to biomass introduction, which accelerated the separation of electron-hole pairs. On the other hand, Fe/La salts participated in the modification process of the biochar surface during the carbonization, which promoted the exposure of oxygen-containing functional groups and aromatic structures facilitating the nitrate adsorption. Notably, the redox-active quinone/phenol groups on the biochar surface contributed to the photogenerated electrons exchange favoring the ammonium ion (NH₄⁺) selectivity as direct electron donor. Nitrate conversion reached 98% and ammonia selectivity reached 97% over the LaFeO₃/biochar photocatalyst under visible light irradiation, when the mass ratio of lotus and Fe/La salts was optimized. Our findings may potentially provide a green and cost-effective way for ammonia recovery from nitrate contaminants.