Characteristics, correlations and health risks of PCDD/Fs and heavy metals in surface soil near municipal solid waste incineration plants in Southwest China

Heavy metals in roadside soil along an expressway connecting two megacities in China: Accumulation characteristics, sources and influencing factors

Transportation is widely recognized as a significant contributor to heavy metal (HM) pollution in roadside soils. A better understanding of HM pollution in soils near expressways is crucial, particularly given the rapid expansion of expressway transportation in China in recent years. In this study, 329 roadside topsoil samples were collected along the Beijing-Tianjin Expressway, which connects two megacities in China. Chemical analysis showed that HM concentrations in the soil samples were generally below national limits. The mean pollution index (Pi) values for As, Cr, Cu, Ni, Pb, and Zn ranged from 0.94 to 1.01, while Cd and Hg exhibited slightly higher mean Pi values of 1.19 and 1.13, respectively. The Nemerow integrated pollution index values for all samples ranged from 0.71 to 4.97, with a mean of 1.26. This suggests a slight enrichment of HM above natural background levels, especially for Cd and Hg. Source apportionment using positive matrix factorization revealed that natural sources contributed the most to soil HMs (64.51 %), followed by agricultural sources (19.15 %), traffic sources (9.77 %), and industrial sources (6.57 %). The Shapley additive explanation analysis, based on the random forest model, identified soil organic carbon, deep soil HM content, altitude, total soil K2O, urbanization composite impact index, and total soil P as primary influencing factors. This indicates that the impact of transportation on roadside soils along the Beijing-Tianjin Expressway is currently relatively limited. The prominent influence of soil properties and altitude underscored the importance of "transport" and "receptor" in the soil HMs accumulation process at the local scale. These findings provide critical data and a scientific basis for decision-makers to develop policies for expressway design and roadside soil protection.

Health risk assessment of municipal solid waste incineration emissions based on regression analysis

This study examined the potential health risks posed by the operation of 96 waste-to-energy (WtE) plants in 30 cities in the Bohai Rim of China. Utilizing a sophisticated simulation approach, the Weather Research and Forecasting (WRF) model coupled with the California Puff (CALPUFF) model, we obtained the spatial distribution of pollutants emitted by WtE plants in the atmosphere. Hazard indices (HI) and cancer risks (CR) were calculated for each plant using the United States Environmental Protection Agency's recommended methodologies. The results indicated that both HIs and CRs were generally low, with values below the accepted threshold of 1.0 and 1.0 × 10-6, respectively. Specifically, the average HI and CR values for the entire study area were 2.95 × 10-3 and 3.43 × 10-7, respectively. However, some variability in these values was observed depending on the location and type of WtE plant. A thorough analysis of various parameters, such as waste composition, moisture content, and operating conditions, was conducted to identify the factors that influence the health risks associated with incineration. The findings suggest that proper waste sorting and categorization, increased cost of construction, and elevated height of chimneys are effective strategies for reducing the health risks associated with incineration. Overall, this study provides valuable insights into the potential health risks associated with WtE plants in the Bohai Rim region of China. The findings can serve as useful guidelines for law enforcement wings and industry professionals seeking to minimize the risks associated with municipal solid waste (MSW) management and promote sustainable development.

Urban air PCDD/Fs: Atmospheric concentrations, temporal changes, gas/particle partitioning, possible sources and cancer risks

Polychlorinated dibenzo-p-dioxins/furans (PCDD/Fs) are pollutants of concern due to their toxic effects. No active sampling study on PCDD/Fs has been conducted in Bursa. This study aimed to fill this gap by measuring PCDD/F levels in the region. Accordingly, the samples were collected from an urban area in Bursa, covering four seasons between June 2022 and April 2023. The total (gas+particulate) ambient air concentrations were between 312.23 and 829.80 fg/m3 (mean: 555.05 ± 173.62 fg/m3). In terms of toxic equivalents (TEQ), the average concentration was 43.29 ± 9.18 fg WHOTEQ/m3. Based on the concentration values obtained, cancer and non-carcinogenic risk values of PCDD/Fs were calculated for three different age groups. The results indicated negligible health risks for all age groups. In addition, a seasonal assessment was also made and it was observed that PCDD/F concentration values varied with the ambient air temperatures. In general, higher values were measured in colder months compared to warmer months. This was probably due to the additional sources and adverse meteorological conditions. Moreover, the gas/particle partitioning of PCDD/Fs was investigated in detail. The average gas and particulate phase concentrations for PCDD/Fs were 101.81 ± 20.77 and 453.24 ± 172.50, respectively. It was found that an equilibrium state was not reached in the gas/particle partitioning. Two different gas/particle partition models based on adsorption and absorption mechanisms were compared, and the absorption model gave more consistent predictions. The Principal Component Analysis (PCA) was employed to identify the possible PCDD/F sources. The results indicated that the region was influenced by vehicle emissions, residential heating, organized industrial zones and metal recycling facilities. In addition, 72-hour backward air mass trajectory analyses were performed to understand the long-range transported air masses. However, it was found that the transported air masses did not significantly affect the concentration values measured in the sampling site.

Geochemical fractionation of iron in paper industry and municipal landfill soils: Ecological and health risks insights

Industrial processes and municipal wastes largely contribute to the fluctuations in iron (Fe) content in soils. Fe, when present in unfavorable amount, causes harmful effects on human, flora, and fauna. The present study is an attempt to evaluate the composition of Fe in surface soils from paper mill and municipal landfill sites and assess their potential ecological and human health risks. Geochemical fractionation was conducted to explore the chemical bonding of Fe across different fractions, i.e., water-soluble (F1) to residual (F6). Different contamination factors and pollution indices were evaluated to comprehend Fe contamination extent across the study area. Results indicated the preference for less mobile forms in the paper mill and landfill, with 26.66% and 43.46% of Fe associated with the Fe-Mn oxide bound fraction (F4), and 57.22% and 24.78% in the residual fraction (F6). Maximum mobility factor (MF) of 30.65% was observed in the paper mill, and 80.37% in the landfill. The enrichment factor (EF) varied within the range of 20 < EF < 40, signifying a high level of enrichment in the soil. The individual contamination factor (ICF) ranged from 0 to >6, highlighting low to high contamination. Adults were found to be more vulnerable towards Fe associated health risks compared to children. The Hazard Quotient (HQ) index showed the highest risk potential pathways as dermal contact > ingestion > inhalation. The study offers insights into potential Fe contamination risks in comparable environments, underscoring the crucial role of thorough soil assessments in shaping land use and waste management policies.

Precision co-composting of multi-source organic solid wastes provide a sustainable waste management strategy with high eco-efficiency: a life cycle assessment

With the increase of organic solid wastes (OSWs), current waste management practices, such as landfill, incineration, and windrow composting, have shown weaknesses in both resource recycling and environmental protection. Co-composting has been used to achieve nutrient and carbon recycling but is accused of high ammonia emission and low degradation efficiency. Therefore, this study developed a precision co-composting strategy (S3, which adds functional bacteria generated from food processing waste to a co-composting system) and compared it with the current OSW treatment strategy (S1) and traditional co-composting strategy (S2) from a life cycle assessment (LCA) perspective. The results showed that compared with S1, the eco-efficiency increased by 31.3% due to the higher economic profit of S2 but did not directly reduce the environmental cost. The addition of bacterial agents reduced ammonia emissions and shortened composting time, so compared with S1 and S2, the environmental cost of S3 was reduced by 37.9 and 43.6%, while the economic profit increased by 79.8 and 24.4%, respectively. The changes in environmental costs and economic benefits resulted in a huge improvement of S3's eco-efficiency, which was 189.6 and 121.7% higher than S1 and S2. Meanwhile, the adoption of S3 at a national scale in China could reduce the emission of 1,4-dichlorobenzene by 99.9% compared with S1 and increase profits by 6.58 billion USD per year. This study proposes a novel approach that exhibits high eco-efficiency in the treatment of OSWs.

Insight into the formation of polychlorinated dibenzo-p-dioxins and dibenzofurans in hazardous waste incineration and incinerators: Formation process and reduction strategy

Incineration technology has been widely adopted to safely dispose of hazardous waste (HW). While the incineration process causes the formation of polychlorinated dibenzo-p-dioxins and dibenzofurans (PCDD/Fs). Due to its extreme toxicity, many scholars have been committed to determining the PCDD/F formation process and reducing emissions in incinerators. Previous studies ignored the impact of incineration and fluctuation of feeding materials on PCDD/F formation in hazardous waste incinerators (HWIs). In this study, differences in PCDD/F formation between HWIs and municipal solid waste incinerators (MSWIs) were pointed out. The incineration section in HWIs should be carefully considered. Laboratory experiments, conventional analysis and thermogravimetry experiments were conducted. An obvious disparity of PCDD/F formation between 12 kinds of HWs was found. Distillation residue was found with remarkably higher PCDD/F concentrations (11.57 ng/g). Except for the Cl content, aromatic rings and C-O bond organics were also found with high correlation coefficients with PCDD/F concentrations (>0.92). And PCDD/Fs were formed through a chlorination process and structure formation process. All of these are helpful to further understand the PCDD/F formation process during HW incineration, optimize the operation conditions in HWIs and reduce the emission pressure of PCDD/Fs in the future.

PCDD/Fs in indoor environments of residential communities around a municipal solid waste incineration plant in East China: Occurrence, sources, and cancer risks

Prolonged exposure to polychlorinated dibenzo-p-dioxins and dibenzofurans (PCDD/Fs) can pose several adverse outcomes on human health. However, there is limited information on public health associated with indoor PCDD/F exposure in residential environments. Here, we examined PCDD/F concentrations in indoor air and indoor dust samples obtained from households near a municipal solid waste incineration (MSWI) plant. Our measurements revealed that the toxic equivalent (TEQ) concentrations of PCDD/Fs in indoor air ranged from 0.01 to 0.05 pg TEQ/m³, which were below intervention thresholds (0.6 pg TEQ/m³). Additionally, the TEQ concentrations of PCDD/Fs in indoor dust ranged from 0.30 to 11.56 ng TEQ/kg. Higher PCDD/F levels were found in household dust in the town of Taopu compared to those in the town of Changzheng. Principal component analysis (PCA) of PCDD/Fs suggested that waste incineration was the primary source of PCDD/Fs in indoor air, whereas PCDD/Fs in indoor dust came from multiple sources. The results of the health risk assessment showed the carcinogenic risk due to indoor PCDD/F exposure was higher for adults than for nursery children and primary school children. The carcinogenic risks of PCDD/Fs for age groups residing near the MSWI plant were all less than the risk threshold (10^-5). Our findings will help to better understand the levels of PCDD/F exposure among urban populations living in residential communities around the MSWI plant and to formulate corresponding control measures to reduce probabilistic risk implications.

Environmental and health impacts assessment of long-term naturally-weathered municipal solid waste incineration ashes deposited in soil-old burden in Bratislava city, Slovakia

Municipal solid waste incineration (MSWI) is an effective method for reducing the volume/mass of waste. However, MSWI ashes contain high concentrations of many substances, including trace metal (loid)s, that could be released into the environment and contaminate soils and groundwater. In this study, attention was focused on the site near the municipal solid waste incinerator where MSWI ashes are deposited on the surface without any control. Here, combined results (chemical and mineralogical analyses, leaching tests, speciation modelling, groundwater chemistry and human health risk assessment) are presented to assess the impact of MSWI ash on the surrounding environment. The mineralogy of ∼forty years old MSWI ash was diverse, and quartz, calcite, mullite, apatite, hematite, goethite, amorphous glasses and several Cu-bearing minerals (e.g. malachite, brochantite) were commonly detected. In general, the total concentrations of metal (loid)s in MSWI ashes were high, following the order: Zn (6731 mg/kg) > Ba (1969 mg/kg) ≈ Mn (1824 mg/kg) > Cu (1697 mg/kg) > Pb (1453 mg/kg) > Cr (247 mg/kg) > Ni (132 mg/kg) > Sb (59.4 mg/kg) > As (22.9 mg/kg) ≈ Cd (20.6 mg/kg). Cadmium, Cr, Cu, Pb, Sb and Zn exceeded the indication or even intervention criteria for industrial soils defined by the Slovak legislation. Batch leaching experiments with diluted citric and oxalic acids that simulate the leaching of chemical elements under rhizosphere conditions documented low dissolved fractions of metals (0.00-2.48%) in MSWI ash samples, showing their high geochemical stability. Non-carcinogenic and carcinogenic risks were below the threshold values of 1.0 and 1 × 10^-6, respectively, with soil ingestion being the most important exposure route for workers. The groundwater chemistry was unaffected by deposited MSWI ashes. This study may be useful in determining the environmental risks of trace metal (loid)s in weathered MSWI ashes that are loosely deposited on the soil surface.

Air pollutant emissions and reduction potentials from municipal solid waste incineration in China

China fully implemented the new emission standards in 2016 to further reduce the emissions of air pollutants from the municipal solid waste (MSW) incineration industry; however, the implementation effect of the new standards remains unknown. This study developed the first nationwide air pollutant emission inventory of MSW incineration plants in China based on the measured concentration data from China's continuous emissions monitoring systems (CEMS) network, and activity level data from the China Urban Construction Statistical Yearbook, to evaluate the effectiveness of implementing the new emission standards and estimate the future reduction potentials. Our results demonstrated that the overall standard-reaching proportions of particulate matter (PM), sulfur dioxide (SO₂), nitrogen oxide (NO_X), hydrogen chloride (HCl) and carbon monoxide (CO) were 98.8%, 99.3%, 99.4%, 99.4% and 97.6%, respectively, by comparing with the corresponding concentration limits of new emission standards. The total emissions of PM, SO₂, NO_X, HCl and CO from 412 MSW incineration plants in 2019 were 1.9, 6.2, 50.8, 4.3 and 6.6 kt yr^-1, respectively, which is 33.6-75.8% lower than those in 2015, mainly due to the sharp decrease in emission factors. Pollutant emission hotspots were mainly concentrated in eastern and central and southern regions with large populations and well-developed economies. The analysis of future scenario results shows that despite the continuous increase of MSW incineration amount in the future, if the government strengthens pollutant emission standards and comprehensively implements waste sorting, total emissions and emission factors of air pollutants could be further reduced by 25.8-72.7% and 59.8-81.2%, respectively, by 2050. These findings provide helpful insights into future policymaking and technology selection for China and other countries seeking to reduce pollutant emissions from the MSW incineration industry.

Inhibition of PCDD/Fs in a full-scale hazardous waste incinerator by the quench tower coupled with inhibitors injection

The control of polychlorinated dibenzo-p-dioxins and dibenzofurans (PCDD/Fs) from the flue gas in hazardous waste incinerators (HWIs) is an intractable problem. To figure out the formation mechanism of PCDD/Fs and reduce the emission, a field study was carried out in a full-scale HWI. Ca(OH)₂ & (NH₄)H₂PO₄ or CH₄N₂S & (NH₄)H₂PO₄ were injected into the quench tower, and the detailed inhibition effect on PCDD/Fs formation by the inhibitors coupled with quench tower was studied. Gas and ash samples were collected to analyze PCDD/Fs. XPS, EDS characterization and Principal component analysis were adopted to further analyze the de novo and precursors synthesis. The PCDD/Fs emissions reduced from 0.135 ng I-TEQ/Nm³ to 0.062 or 0.025 ng I-TEQ/Nm³ after the injection of Ca(OH)₂ & (NH₄)H₂PO₄ or CH₄N₂S & (NH₄)H₂PO₄, respectively. The quench tower was found mainly hindering de novo synthesis by reducing reaction time. CP-route was the dominant formation pathway of PCDD/Fs in quench tower ash. Ca(OH)₂ & (NH₄)H₂PO₄ effectively inhibit precursors synthesis and reduce proportions of organic chlorine from 4.11% to 2.86%. CH₄N₂S & (NH₄)H₂PO₄ show good control effects on both de novo and precursors synthesis by reducing chlorine content and inhibiting metal-catalysts. Sulfur-containing inhibitors can cooperate well with the quench tower to inhibit PCDD/Fs formation and will be effective to reduce dioxins formation in high chlorine flue gas. The results pave the way for further industrial application of inhibition to reduce PCDD/Fs emissions in the HWIs flue gas.

Impact of Pandemic COVID-19 on Air Quality at a Combustion Plant and Adjacent Areas

Following the emergence of the infectious disease COVID-19, caused by the coronavirus SARS-Cov-2, the WHO (World Health Organization) declared a pandemic in March 2020. The pandemic has affected people’s health, social behaviour, and the economy around the world. It has also had an indirect impact on the environment, including atmospheric air quality, related to changes in the levels of pollutant emissions and the amounts of greenhouse gases released into the atmosphere. The observed changes have, in part, been a consequence of restrictions on human movement, which has translated into an increase in water consumption, and consequently into an increase in the volume of wastewater. As a result, a new type of incoming load has appeared in sewage treatment plants. Municipal sewage sludge (MSS) is a waste product from the wastewater treatment process, containing substances that are hazardous to both the environment and humans (bacteria, pathogens, viruses). To dispose of these contaminants, MSS is thermally processed in specially designed installations. Thermal recycling technology is based on a fluidized bed, in which MSS is rapidly transformed at a temperature of at least 750 °C. Organic compounds are oxidized, gasified, and combusted. The exhaust fumes are emitted into the atmosphere. They also carry a load of pollutants, which can affect the air quality both on site and in the surroundings of the treatment plant. This paper presents measurements of air pollutant emissions and pollutant concentrations provided by the Group Sewage Treatment Plant in Łódź Itd. Łódź is a city located in Poland, in central Eastern Europe. The research covers the area of the wastewater treatment plant and its immediate surroundings within a radius of about 1.5 km. The data show the influence of the pandemic restrictions on the concentrations of gaseous substances, bacteria, fungi, and particulate matter on the state of air quality. Increased emissions of NOx (by 86%), PM10 (by 50%), HCl (by 37%), and SO2 (by 16%) were observed compared to the pre-COVID-19 period.