Variability of microplastic loading and retention in four inland lakes in Minnesota, USA

Microplastic pollution in Taihu Lake: Spatial distribution from the lake inlet to the lake centre and vertical stratification in the water column

The aim of this study was to analyse the distribution characteristics of microplastics in lakes, assess their potential impacts on ecosystems, and explore effective management and control strategies. Despite a wealth of research focused on lake water, the variations in microplastics with offshore distance and their vertical distribution within the water column are not well understood. Here, we investigated the freshwater continuum from the inlet of Taihu Lake to the centre, and vertically from the surface to the bottom water. The results revealed that the distribution of microplastics (<5 mm in size) exhibited a clear spatial gradient. The microplastic abundance at the lake entrance was 2.12 times greater than that at the centre, and on the lake surface, the microplastic abundance was 1.36-1.69 times higher than that estimated from the water column. Notably, the proportion of small-sized microplastics (<0.1 mm) in the bottom water was 1.72 times higher than that in the surface water. The main types of polymers identified were polyamide (PA) and polyvinyl chloride (PVC), and their main sources may be from clothes washing and industrial activities. The Monte Carlo simulation results indicated that the overall risk of microplastics in surface water was higher than that in the water column, and the contributions of PVC and polyurethane (PU) to the ecological risk were 90.10% and 9.57%, respectively. Therefore, PVC and PU should be the priority of microplastic pollution control. This study provides the first comprehensive evaluation of the spatial ecological risk of microplastics in Taihu Lake, which improves our understanding of the distribution and environmental risks of microplastics in lake systems.

Global patterns of lake microplastic pollution: Insights from regional human development levels

Microplastics have emerged as a pervasive pollutant across various environmental media. Nevertheless, our understanding of their occurrence, sources, and drivers in global lakes still needs to be completed due to limited data. This study compiled data from 117 studies (2016-May 2024) on microplastic contamination in lake surface water and sediment, encompassing surface water samples in 351 lakes and lake sediment samples in 200 lakes across 43 countries. Using meta-analysis and statistical methods, the study reveals significant regional variability in microplastic pollution, with concentrations ranging from 0.09 to 207,500 items/m3 in surface water and from 5.41 to 18,100 items/kg in sediment. Most microplastics were under 1 mm in particle size, accounting for approximately 79 % of lake surface water and 76 % of sediment. Transparent and blue microplastics were the most common, constituting 34 % and 21 % of lake surface water and 28 % and 18 % of sediment, respectively. Fibers were the dominant shape, representing 47 % of lake surface water and 48 % of sediment. The primary identified polymer types were polyethylene (PE), polypropylene (PP), and polyethylene terephthalate (PET). Countries like India, Pakistan, and China had higher contamination levels. Positive correlations were found between microplastic abundance in surface water and factors like human footprint index (r = 0.29, p < 0.01), precipitation (r = 0.21, p < 0.05), and net surface solar radiation (r = 0.43, p < 0.001). In contrast, negative correlations were observed with the human development index (r = -0.61, p < 0.01) and wind speed (r = -0.42, p < 0.001). In sediment, microplastics abundance correlated positively with the human footprint index (r = 0.45, p < 0.001). This study underscores the variability in microplastic pollution in global lakes and the role of human activities and environmental factors, offering a valuable reference for future research.

Occurrence and migration patterns of microplastics in different tidal zones of tourist beaches: A case study in the Bohai Bay, North China

Coastal areas are acknowledged to be significant reservoirs of microplastics, while limited research on their presence and migration in the intertidal zones. This study investigated in a tourist beach in northern China, to reveal the occurrence of microplastics at different intertidal heights, elucidates their migration patterns, and discusses the impact of tourist activities on microplastics. Results showed that the mean microplastic abundance was 2114.8 ± 933.2 items/kg in sediments and 30,670.8 ± 15,094.9 items/m3 in seawater. Fibers were the most common shape; transparent, blue, green and black prevailed in color; and cellulose and PET were the most common components. Microplastic abundances decreased from high tide zone to low tide zone, and the abundances of microplastics in seawater were positively correlated with those in the high tide zone and negatively correlated with those in the low tide zone. Compared to wave disturbance, human activities have a relatively limited impact on microplastic abundance. However, intensive tourist activities contribute to a higher diversity of microplastic types on tourist beaches. This study enhances the understanding of the occurrence and migration patterns of microplastics in tourist beaches, and provides a valuable dataset and theoretical basis for subsequent research on microplastic pollution in coastal areas.

Microplastics monitoring in freshwater systems: A review of global efforts, knowledge gaps, and research priorities

The escalating production of synthetic plastics and inadequate waste management have led to pervasive microplastic (MP) contamination in aquatic ecosystems. MPs, typically defined as particles smaller than 5 mm, have become an emerging pollutant in freshwater environments. While significant concern about MPs has risen since 2014, research has predominantly concentrated on marine settings, there is an urgent need for a more in-depth critical review to systematically summarize the current global efforts, knowledge gaps, and research priorities for MP monitoring in freshwater systems. This review evaluates the current understanding of MP monitoring in freshwater environments by examining the distribution, characteristics, and sources of MPs, alongside the progression of analytical methods with quantitative evidence. Our findings suggest that MPs are widely distributed in global freshwater systems, with higher abundances found in areas with intense human economic activities, such as the United States, Europe, and China. MP abundance distributions vary across different water bodies (e.g., rivers, lakes, estuaries, and wetlands), with sampling methods and size range selections significantly influencing reported MP abundances. Despite great global efforts, there is still a lack of harmonized analyzing framework and understanding of MP pollution in specific regions and facilities. Future research should prioritize the development of standardized analysis protocols and open-source MP datasets to facilitate data comparison. Additionally, exploring the potential of state-of-the-art artificial intelligence for rapid, accurate, and large-scale modeling and characterization of MPs is crucial to inform effective strategies for managing MP pollution in freshwater ecosystems.

Unveiling microplastics pollution in a subtropical rural recreational lake: A novel insight

While global attention has been primarily focused on the occurrence and persistence of microplastics (MP) in urban lakes, relatively little attention has been paid to the problem of MP pollution in rural recreational lakes. This pioneering study aims to shed light on MP size, composition, abundance, spatial distribution, and contributing factors in a rural recreational lake, 'Nikli Lake' in Kishoreganj, Bangladesh. Using density separation, MPs were extracted from 30 water and 30 sediment samples taken from ten different locations in the lake. Subsequent characterization was carried out using a combination of techniques, including a stereomicroscope, Fourier transform infrared spectroscopy (FTIR) and field emission scanning electron microscopy (FE-SEM). The results showed a significant prevalence of MPs in all samples, with an average amount of 109.667 ± 10.892 pieces/kg3 (dw) in the sediment and 98.167 ± 12.849 pieces/m3 in the water. Small MPs (<0.5 mm), fragments and transparent colored particles formed the majority, accounting for 80.2%, 64.5% and 55.3% in water and 78.9%, 66.4% and 64.3% in sediment, respectively. In line with global trends, polypropylene (PP) (53%) and polyethylene (PE) (43%) emerged as the predominant polymers within the MPs. MP contents in water and sediment showed positive correlations with outflow, while they correlated negatively with inflow and lake depth (p > 0.05). Local activities such as the discharge of domestic sewage, fishing waste and agricultural runoff significantly influence the distribution of polypropylene. Assessment of pollution factor, pollution risk index and pollution load index values at the sampling sites confirmed the presence of MPs, with values above 1. This study is a baseline database that provides a comprehensive understanding of MP pollution in the freshwater ecosystem of Bangladesh, particularly in a rural recreational lake. A crucial next step is to explore ecotoxicological mechanisms, legislative measures and future research challenges triggered by MP pollution.

Dynamics of microplastic abundance under tidal fluctuation in Musi estuary, Indonesia

Tidal dynamics contribute to fluctuations in microplastic abundance (MPs). This is the first study to characterize MPs under the influence of tidal fluctuations in the Musi River Estuary. MPs samples were collected during flood and ebb tides at 10 research stations representing the inner, middle and outer parts of the Musi River Estuary. MPs were extracted to identify the shape, color and size. MP abundances were 467.67 ± 127.84 particles/m3 during flood tide and 723.67 ± 112.05 particles/m3 during ebb tide. The concentration of MPs in the outer zone of the estuary (ocean) was detected to be higher than in the inner zone of the estuary (river). The MPs found were dominated by black color, film shape and size 101-250 μm. A greater abundance of MPs at ebb tide than at flood tide implies that the Musi Estuary's largest source of emissions is discharge from the river.

Size Distributions of Microplastics in the St Louis Estuary and Western Lake Superior

Identifying the sources and fate of microplastics in natural systems has garnered a great deal of attention because of their implications for ecosystem health. This work characterizes the size fraction, morphology, color, and polymer composition of microplastics in western Lake Superior and its adjacent harbor sampled in August and September 2021. The results reveal that the overall microplastic counts are similar, with the harbor stations ranging from 0.62 to 3.32 microplastics per liter and the lake stations ranged from 0.83 to 1.4 microplastics per liter. However, meaningful differences between the sample locations can be seen in the size fraction trends and polymer composition. Namely, the harbor samples had relatively larger amounts of the largest size fraction and more diversity of polymer types, which can be attributed to the urbanized activity and shorter water residence time. Power law size distribution modeling reveals deviations that help in the understanding of potential sources and removal mechanisms, although it significantly underpredicts microplastic counts for smaller-sized particles (5-45 μm), as determined by comparison with concurrently collected microplastic samples enumerated by Nile Red staining and flow cytometry.

Exploring correlations between microplastics, microorganisms, and water quality in an urban drinking water source

The microplastic pollution in freshwater system is gradually becoming more severe, which has led to increasing attention on the distribution and potential harmful effects of microplastics. Moreover, microplastics may have an impact on river ecology and pose risks to ecosystems. Therefore, it is important to reveal this process. This study aimed to explore correlations between microplastics and free-living microorganisms in an urban drinking water source of Xiangjiang River by using multivariate statistical analysis. The results indicated that the abundance of microplastics (size 50 μm to 5 mm) in surface water and sediments ranged from 0.72 to 18.6 (mean ± SD: 7.32 ± 2.36) items L-1 and 26.3-302 (150 ± 75.6) items kg-1 dry weight (dw), respectively, suggesting potential microplastic pollution despite the protected status as a drinking water source. Higher microplastic abundances were observed in urban areas and the downstream of wastewater plants, with mostly granular shape, transparent and black color as well as 50-100 μm in size. The multivariate statistical analysis presented that the abundance of microplastics is not significantly correlated with water indicators, due to the complexity of the abundance data. The water indicators showed an obvious correlation with microplastics in colors of transparent and black, and smaller sizes of 50-100 μm. This is also true for microplastics and microorganisms in water and sediment. Proteobacteria was the main prokaryote in water and sediments, being positively correlated with 50-100 μm microplastics; while Chloroplastida was the dominated eukaryotes, presenting a weak correlation with smaller-size microplastics. Overall, when considering the properties of microplastics such as shape, color and size, the potential correlations with water indicators and microorganisms were more evident than abundance. This study provides new insights into the multivariate statistical analysis, explaining the potential correlations among microplastic properties, microorganisms and environmental factors in a river system.

Environmental fate of microplastics in alpine and canyon-type river-cascade reservoir systems: Large-scale investigation of the Yalong River in the eastern Qinghai-Tibet Plateau

Reservoirs are regarded as potential collection sites for microplastics (MPs), and ample water resources in plateau regions provide favorable natural conditions for hydroelectric power generation. However, research on the impact of cascade reservoir construction in the plateau region on the fate of MPs within the watershed is limited. In this study, the Yalong River, an alpine canyon river in the eastern Qinghai-Tibet Plateau, was selected as the research area. This study explored the distribution of MPs at various depths in water, sediment, and riverbank soil as well as the formation of "MP communities" within the river-cascade reservoir system. Furthermore, the effects of dam construction on MPs' migration in different environments were analyzed. The results revealed that the abundance of MPs in the water and sediment within the cascade reservoir area (CRA) was significantly higher than that in the river area (RA) (P < 0.001). Additionally, the trend of increasing MPs in water with decreasing altitude was notably slower in CRA. Regarding shape, the proportion of fibers in the water within the CRA was significantly lower than that in the RA, with a smaller vertical migration rate in the water than in the sediment. The proportion of MPs < 500 μm in the water within the CRA was significantly higher than that in the RA. High-density MPs were notably deposited in the reservoir sediments. The analysis of the MP communities revealed that the construction of cascade dams led to relative geographical isolation between different sampling sites, reducing the similarity of MP communities in the CRA. This study established a theoretical foundation for understanding the impact of cascade dam construction on the fate characteristics of MPs and their potential risks in plateau areas.

Are algae a promising ecofriendly approach to micro/nanoplastic remediation?

How to reduce microplastic pollution in aquatic ecosystem has become the focus of the global attention. The re-removal of microplastics of wastewater treatment plant (WWTP) effluent is gradually being put on the agenda. Recently, algae have been used as an ecofriendly remediation strategy for microplastic removal. Microplastics in sewage can be removed by algae through interception, capture, and entanglement, and can also form heterogeneous aggregates with algae, thereby reducing their free suspensions. Algae can recover nitrogen and carbon from wastewater and can be made into biochar, biofertilizers, and biofuels. However, problematically, this technology has been in the laboratory research stage, and existing research results cannot provide effective basis for its application. Microplastic removal via algae is influenced by wastewater flow rate, microplastic types, and pollutants. Microplastics are only physically fixed by algae, and ensuring that microplastics do not re-enter the environment during resource and capacity recovery is also a key factor limiting the implementation of this technology. The topic of this paper is to discuss the performance of the current tertiary wastewater treatment process - algae process to remove microplastics. Algae can remove nitrogen and phosphorus pollutants in sewage and remove microplastics at the same time, which can realize energy recovery and reduce ecological risks of the effluent. Although algae combined tertiary sewage treatment is a green technology for microplastic removal, its application still needs to be explored. The key challenges that need to be addressed, from single laboratory conditions to complex conditions, from small-scale testing to large-scale simulations, lie ahead of the application of this friendly technology.

Constructed wetlands as neglected fixed source of microplastics and antibiotic resistance genes in natural water bodies?

The pollution status and the harm caused by microplastics and antibiotic resistance genes (ARGs) in aquatic ecosystems have been a growing concern. The presence of microplastics could accelerate the transfer and spread of ARGs. Before sewage reaches natural water bodies, microplastics and ARGs need to be eliminated through specific processes. Constructed wetlands are currently an effective and environmentally friendly wastewater treatment process. Research has shown significant effectiveness in removing microplastics and ARGs. Microplastics and ARGs can be removed through processes such as adsorption, capture, adhesion, and biodegradation. However, long-term continuous operation could lead to constructed wetlands becoming significant reservoirs of microplastics and ARGs. Inflow loads and seasonal variations in constructed wetlands may result in the reintroduction of persistent microplastics and ARGs into the receiving water body, establishing the constructed wetland as a continuous source of these pollutants in the receiving water body. The key to the widespread application of constructed wetlands lies in solving this challenging problem. Therefore, although constructed wetlands serve as a green strategy for removing microplastics and ARGs, there are still many gaps in our knowledge. Based on the current accumulation of microplastics and ARGs in constructed wetlands, this paper summarizes the removal of microplastics and ARGs in existing constructed wetlands and explores the interaction between them. Additionally, it proposes suggestions for optimizing the process and improving the reliability of monitoring microplastics and ARGs in sewage.

Characteristics and seasonal variation of microplastics in the wastewater treatment plant: The case of Bursa deep sea discharge

Microplastics (MPs) are an emerging pollutant that can be detected in all ecosystems, especially aquatic ecosystems. Wastewater treatment plants (WWTPs) are important point sources of MP release into the sea. In this study, the characteristics of MPs in wastewater and sludge samples taken from different units of WWTP in Bursa-Gemlik district for 12 months were investigated. Wastewater and sludge samples collected from 7 different points were classified as size, shape, color, and counted. The amount of MP in the influent and effluent of the WWTP, respectively; 107.1 ± 40.2 MP/L and 4.1 ± 1.1 MP/L. Although the MP removal efficiency of the WWTP is 96.17 %, approximately 74,825,000 MP is discharged into the Marmara Sea every day. The amount of MP in the sludge is 14.3 ± 7.1 MP/g. The amount of MP accumulated in 22tons of waste sludge formed daily in WWTP was calculated as 314,600,000 MP, and the annual accumulated amount was calculated as approximately 1.15 × 1011 MP. The MPs in the WWTP were mainly 1-0.5 mm in size. Fibers were the dominant MP shape in both the wastewater and sludge samples. Black and transparent were the dominant MP colors. Seven different polymer types of MPs were detected, which were mainly types of polyethylene, polypropylene, and polyethylene terephthalate. Despite the high removal efficiency in the investigated WWTP, it has been shown that it acts as an important source of MPs to the sea ecosystem due to the high discharge rates.