Resin-based dental sealants as a source of human exposure to bisphenol analogues, bisphenol A diglycidyl ether, and its derivatives

Bisphenol A release from CAD/CAM splint materials

This study aimed to investigate the bisphenol A (BPA) release from four CAD/CAM splint materials: three polycarbonate-based (DD BioSplint C, Splint Plus Biostar, Temp Premium Flexible) and one polymethylmethacrylate-based (Temp Basic) material. From each material, ten cylindrical samples (n = 40) were immersed in high-performance liquid chromatography (HPLC) grade water following ISO 10993-12 and incubated for 24 h in an incubation shaker at 37°C and 112 rpm. Following BPA derivatization, analysis was performed by high-performance liquid chromatography-tandem mass spectrometry (HPLC-MS/MS). After 24 h of incubation, all investigated materials released significant amounts of BPA compared to water blanks. The material-dependent elution increased in the following order: DD BioSplint C < Splint Plus Biostar < Temp Basic < Temp Premium Flexible. Subtracting extraneous BPA, the concentrations ranged between 2.27 ng/mL and 12.65 ng/mL. After extrapolating the concentrations in relation to the average surface area of occlusal splints, the amount of BPA per mL exceeded the Tolerable Daily Intake (TDI) set by the European Union for a person weighing 70 kg by 1.32-6.16 times. Contrary to the release from previously investigated materials, BPA elution from CAD/CAM splint materials was highly elevated. Considering the increasing adaptation of CAD/CAM techniques, elution from them may represent a relevant BPA source in daily dental practice.

Role of Silica on Clay-Catalyzed Ozonation for Total Mineralization of Bisphenol-A

Catalytic ozonation for the total mineralization of bisphenol-A (BPA) from aqueous solution was investigated in the presence of various silica-based catalysts such as mesoporous silica, acid-activated bentonite (HMt) and montmorillonite-rich materials (Mt) ion-exchanged with Na⁺ and Fe²⁺ cations (NaMt and Fe(II)Mt). The effects of the catalyst surface were studied by correlating the hydrophilic character and catalyst dispersion in the aqueous media to the silica content and BPA conversion. To the best of our knowledge, this approach has barely been tackled so far. Acid-activated and iron-free clay catalysts produced complete BPA degradation in short ozonation times. The catalytic activity was found to strongly depend on the hydrophilic character, which, in turn, depends on the Si content. Catalyst interactions with water and BPA appear to promote hydrophobic adsorption in high Si catalysts. These findings are of great importance because they allow tailoring silica-containing catalyst properties for specific features of the waters to be treated.

Placental transfer of bisphenol diglycidyl ethers (BDGEs) and its association with maternal health in a population in South of China

Despite high production and usage, little is known about exposure to bisphenol diglycidyl ethers (BDGEs) and their derivatives in pregnant women and fetuses. In this study, we determined nine BDGEs in 106 paired maternal and cord serum samples collected from e-waste dismantling sites in South of China. Bisphenol A bis (2,3-dihydroxypropyl) glycidyl ether (BADGE·2H2O), bisphenol A (3-chloro-2-hydroxypropyl) (2,3-dihydroxypropyl) glycidyl ether (BADGE·HCl·H2O), and bisphenol F diglycidyl ether (BFDGE) were the major BDGEs, with median concentrations of 0.57, 4.07, and 1.60 ng/mL, respectively, in maternal serum, and of 3.58, 5.61, and 0.61 ng/mL, respectively, in cord serum. The transplacental transfer efficiencies (TTEs) were estimated for BDGEs found in samples, and median values were in the range of 0.98 (BFDGE) to 5.91 (BADGE·2H2O). Our results suggested that passive diffusion plays a role in the placental transfer of BADGE·HCl·H2O and BFDGE, whereas several mechanisms contribute to the high accumulation of BADGE·2H2O in cord serum. Multiple linear regression analysis indicated significant associations between maternal serum concentrations of BDGEs and blood clinical biomarkers, especially those related to liver injuries, such as alanine aminotransferase (ALT), aspartate aminotransferase (AST), alkaline phosphatase (ALP), and adenosine deaminase (ADA) (P < 0.05). To our knowledge, this is the first study to report the occurrence of BDGEs in paired maternal-fetal serum samples and provide new insights into prenatal and fetal exposures. The newly discovered TTEs in maternal-fetal pairs contribute to a fuller inventory of the transmission activity of pollutants in the human body, ultimately adding to a more significant comprehensive risk evaluation.

Increased gut serotonin production in response to bisphenol A structural analogs may contribute to their obesogenic effects

Obesogens are synthetic, environmental chemicals that can disrupt endocrine control of metabolism and contribute to the risk of obesity and metabolic disease. Bisphenol A (BPA) is one of the most studied obesogens. There is considerable evidence that BPA exposure is associated with weight gain, increased adiposity, poor blood glucose control, and nonalcoholic fatty liver disease in animal models and human populations. Increased usage of structural analogs of BPA has occurred in response to legislation banning their use in some commercial products. However, BPA analogs may also cause some of the same metabolic impairments because of common mechanisms of action. One key effector that is altered by BPA and its analogs is serotonin, however, it is unknown if BPA-induced changes in peripheral serotonin pathways underlie metabolic perturbations seen with BPA exposure. Upon ingestion, BPA and its analogs act as endocrine-disrupting chemicals in the gastrointestinal tract to influence serotonin production by the gut, where over 95% of serotonin is produced. The purpose of this review is to evaluate how BPA and its analogs alter gut serotonin regulation and then discuss how disruption of serotonergic networks influences host metabolism. We also provide evidence that BPA and its analogs enhance serotonin production in gut enterochromaffin cells. Taken together, we propose that BPA and many BPA analogs represent endocrine-disrupting chemicals that can influence host metabolism through the endogenous production of gut-derived factors, such as serotonin.

Single and combined toxicity effects of nanoplastics and bisphenol F on submerged the macrophyte Hydrilla verticillata

Nano- and microplastics pose severe risks to the ecological environment. Nanoplastics (NPs) not only directly affect aquatic organisms, but also adsorb to other pollutants, resulting in compound pollution. Bisphenol F (BPF), an endocrine-disrupting chemical, is increasingly replacing bisphenol A (BPA) and is therefore widely distributed in the environment. In this study, the toxic effects of polystyrene nanoplastics (PS-NPs) and BPF and their combined exposure on the submerged macrophytes Hydrilla verticillata (H. verticillata) and leaf biofilms, were investigated. Results showed that 10 mg/L PS-NPs and combined exposure to 10 mg/L PS-NPs and 10 mg/L BPF significantly decreased the relative growth rate and chlorophyll content of H. verticillata, whereas BPF exposure alone had no impact on the growth and the contents of photosynthetic pigments in H. verticillata. Individual and combined exposure to PS-NPs and BPF can trigger antioxidant responses such as increased activities of superoxide dismutase, peroxidase, and malondialdehyde, as well as higher levels of glutathione S-transferase and glutathione and decreased catalase activity. The results of the scanning electron microscopy (SEM) showed that the nanoplastics particles were adsorbed on the surface of plant leaves, explaining their toxic effects, whereas BPF increases the sorption of PS-NPs on the surface of H. verticillata, potentially leading to PS-NPs enrichment in the food chain. The diversity and richness of the microbial community were altered by exposure to PS-NPs and BPF individually and in combination. The current study is the first to assess the effects of PS-NPs and BPF exposure on the growth, physiological characteristics, and leaf biofilm properties of submerged macrophytes.

Influence of BPA exposure, measured in saliva, on childhood weight

INTRODUCTION

Endocrine disruptors such as bisphenol A (BPA), BPA glycidyl methacrylate, and other BPA acrylate-based derivatives have been related to type 2 diabetes, the metabolic syndrome, and obesity, among other metabolic disorders. The objective of this study is to examine the influence of BPA exposure by saliva analysis and daily physical activity on the risk of overweight/obesity in schoolchildren from southern Spain.

METHODS

The study included 300 children (53.5% girls) aged 7-10 years. Participants completed a questionnaire with four sections: participant data, including demographic information and life and family habits; semi-quantitative food frequency questionnaire; anthropometric variables; and physical activity variables. All participants underwent dental examination, when the presence of sealants/composites in each tooth and other dental alterations was recorded, and samples of whole saliva were collected for UHPLC-MS/MS analyses.

RESULTS

Risk of overweight/obesity was significantly influenced by body fat composition (OR = 10.77), not walking to and from school (OR = 1.38), lesser energy expenditure in sedentary activities (OR = 12.71), greater energy expenditure in sports (OR =1.62), and exposure to BPA from dental sealants/composites (OR = 1.38; p = 0.058).

DISCUSSION

Further research is warranted on this issue in children, who may be especially vulnerable to the negative health effects of endocrine disruption.

Profile and removal of bisphenol analogues in hospital wastewater, landfill leachate, and municipal wastewater in South China

The presence of bisphenol analogues (BPs) in wastewater can have adverse effects to organisms in the environment. However, knowledge of the wastewater sources, such as hospitals and landfills, as well as the removal of BPs are still limited. Fifteen BPs were investigated in hospital, landfills, and municipal wastewater treatment plants (WWTPs) in South China. Eleven BPs were detected in various source wastewaters, and bisphenol A (BPA) is generally the dominant pollutant. In 4 hospitals, the total concentrations of BPs (∑BPs) in hospital wastewater and treated wastewater ranged from 122 to 1040 ng/L. In the landfill, ∑BPs in leachate and treated leachates were 32,130 and 145 ng/L, respectively. In 5 municipal WWTPs, ∑BPs was up to 17,200 ng/L in influents, 502 ng/L in effluents, and 291 ng/g in sludges. The modified A²/O process exhibited best removal profile for BPs, while the UNITANK process had no advantages. The annual mass load estimates of hospital treated wastewater, landfill treated leachate, and WWTP effluents in Guangdong Province, South China, were 630, 9.46, and 4697 kg/y, respectively. The risk quotient values in source effluents revealed low to medium estrogenic risks to receiving rivers. Control measures should be applied to further remove BPs not only from WWTP effluents but also from other sources.

A comprehensive review on the analytical method, occurrence, transformation and toxicity of a reactive pollutant: BADGE

Bisphenol A diglycidyl ether (BADGE)-based epoxy resin is one of the most widely used epoxy resins with an annual production amount of several million tons. Compared with all other legacy or emerging organic compounds, BADGE is special due to its toxicity and high reactivity in the environment. More and more studies are available on its analytical methods, occurrence, transformation and toxicity. Here, we provided a comprehensive review of the current BADGE-related studies, with focus on its production, application, available analytical methods, occurrences in the environment and human specimen, abiotic and biotic transformation, as well as the in vitro and in vivo toxicities. The available data show that BADGE and its derivatives are ubiquitous environmental chemicals and often well detected in human specimens. For their analysis, a water-free sample pretreatment should be considered to avoid hydrolysis. Additionally, their complex reactions with endogenous metabolites are areas of great interest. To date, the monitoring and further understanding of their transport and fate in the environment are still quite lacking, comparing with its analogues bisphenol A (BPA) and bisphenol S (BPS). In terms of toxicity, the summary of its current studies and Environmental Protection Agency (EPA) ToxCast toxicity database suggests BADGE might be an endocrine disruptor, though more detailed evidence is still needed to confirm this hypothesis in in vivo animal models. Future study of BADGE should focus on its metabolic transformation, reaction with protein and validation of its role as an endocrine disruptor. We believe that the elucidation of BADGEs can greatly enhance our understandings of those reactive compounds in the environment and human.

Occurrence and Fate of Bisphenol A and its Congeners in Two Wastewater Treatment Plants and Receiving Surface Waters in Romania

The present study investigated the distribution and environmental fate of Bisphenol A (BPA), the 4-hydroxyacetophenone (4-HAP) metabolite, and 5 other bisphenol congeners in 2 municipal wastewater treatment plants (WWTPs) and their receiving rivers in Romania. Accordingly, a new, highly sensitive and accurate solid-phase extraction-liquid chromatography-electrospray ionization-tandem mass spectrometry method was developed and validated. This technique generated low limit of quantitation values: below 2.3 ng/L for surface water and less than 2.4 and 2.7 ng/L for WWTP effluent and influent water. The sum of detected analytes in wastewater was between 1337 and 16 118 ng/L for influent samples and between 15 and 96 ng/L for effluent samples. In surface water, the total of all compounds was somewhere between 34 and 240 ng/L. The highest concentration observed was for BPA in all 3 types of analyzed water (up to 9140 ng/L for influent, as high as 75 ng/L for effluent, and a maximum of 135 ng/L in surface waters). All analyzed samples were free of bisphenols B, C, and F. For all analytes detected in surface water, the concentration values were higher than those determined in the effluent samples, which may be caused by intrinsic contamination of the 2 rivers (Danube and Jiu Rivers). Values of environmental risk coefficients, calculated for both effluents and surface waters, indicated a low ecological risk or no ecological risk for 3 types of organisms (algae, daphnia, and fish). Human risk assessment calculation suggests no risk to human health as a result of the presence of BPA in either of the 2 rivers. Environ Toxicol Chem 2021;40:435-446. © 2020 SETAC.

Deposition, depletion, and potential bioaccumulation of bisphenol F in eggs of laying hens after consumption of contaminated feed

Increasing concerns over bisphenol A (BPA) as an endocrine disrupting chemical (EDC) and its adverse effects on both humans and animals have led to the substitution by structural analogs, such as bisphenol F (BPF), in many application areas. Information regarding to the carry-over of this emerging chemical in farm animals is essential for legislation and risk assessment purposes. In this study, a large-scale number of animal experiments were designed to investigate the transfer of BPF from feed to eggs. One control and three experimental groups of laying hens (72 hens per group) were fed with basal diets and BPF-contaminated feed at concentration levels of 0.1, 0.5 and 2.5 mg kg^-1, respectively, for two weeks. The hens were then fed with BPF-free diets for a further four weeks. Eggs were collected daily, and separated into egg yolk and white for BPF analysis. The effects of different levels of BPF exposure on laying performance followed a non-monotonic dose-response curve, since low level BPF (0.1 mg kg^-1) exposure did increase the laying rate, mean egg weight and daily feed intake, while high level BPF (2.5 mg kg^-1) exposure showed a decreasing trend. BPF residues were detected in both egg yolks and whole eggs after two days of administration, and plateau phase was achieved within 9-18 days. There are clear linear dose-response relationships between the plateau BPF concentrations in feed and eggs. The residue of BPF was found mainly in egg yolks with conjugated form and depleted slowly (still detected 21 days after feeding the BPF-free diet of the high level group). Mean carry-over rate of 0.59% BPF from feed to eggs was obtained. Compared with the carry-over rates of PCBs and dioxins, BPF showed a relatively minor trend of bioaccumulation in eggs. To the best of our knowledge, this is the first report on the deposition, depletion, and bioaccumulation study of bisphenols in farm animals. The quantity of data can therefore be helpful in the frame of risk assessment, especially for a comprehensive estimation of consumer exposure to the residues of bisphenols.

Short-term variability of bisphenols in spot, morning void and 24-hour urine samples

Due to worldwide regulations on the application of the high production volume industrial chemical bisphenol A (BPA) in various consumer products, alternative bisphenols such as bisphenol F (BPF) and bisphenol S (BPS) are increasingly used. To assess human exposure to these chemicals, biomonitoring of urinary concentrations is frequently used. However, the short-term variability of alternative bisphenols has not been evaluated thoroughly yet, which is essential to achieve a correct estimation of exposure. In this study, we collected all spot urine samples from ten healthy adults for five consecutive days, and an additional 24 h pooled sample. We measured the concentrations of seven bisphenols (BPAF, BPF, BPA, BPB, BPZ, BPS and BPAP) in these samples using gas chromatography coupled to tandem mass spectrometry. BPA, BPF and BPS were frequently found in spot samples (>80%), while bisphenol AP (BPAP) was detected in 43% of spot samples. Calculations of intra-class correlation coefficients (ICCs) showed that reproducibility of these four bisphenols was relatively poor (<0.01-0.200) but improved when concentrations were corrected for urine dilution using creatinine levels (0.128-0.401). Of these four bisphenols, BPF showed the best reproducibility (ICC 0.200-0.439) and BPS the most variability (ICC <0.01-0.128). In general, the within-participant variability of bisphenol levels was the largest contributor to the total variance (47-100%). We compared repeated first morning voids to 24 h pooled urine and found no significantly different concentrations for BPA, BPF, BPS, or BPAP. Levels of BPA and BPF differed significantly depending on the sampling time throughout the day. The findings in this study suggest that collecting multiple samples per participant over a few days, in predefined time windows throughout the day, could result in a more reliable estimation of internal exposure to bisphenols.

BPA interferes with StAR-mediated mitochondrial cholesterol transport to induce germline dysfunctions

Bisphenol A is an endocrine disruptor associated with hormone synthesis and reproduction alterations. However, the initiating events underpinning these dysfunctions are still unclear. Here, we address the hypothesis that BPA interferes with the highly evolutionary conserved process of mitochondrial cholesterol transport, a crucial step in steroid hormone biosynthesis, by using the model organism C. elegans. We observed that embryonic lethality and germline apoptosis, hallmarks of BPA's reproductive toxicity in C. elegans, are fully rescued by low exogenous cholesterol supplementation. We also observed that increasing BPA concentrations proportionally reduced mitochondrial cholesterol levels. Mutants for strl-1 (ortholog of StAR), but not C41G7.9 (ortholog of TSPO), show reproductive defects similar to BPA's while BPA exposure in a strl-1 background did not worsen these effects. Finally, cholesterol supplementation rescued these defects for all strl-1 genotype/BPA combinations assessed. Together, these results uncover a novel mechanism underlying BPA's germline toxicity through the alteration of cholesterol transport.

Stabilities of bisphenol A diglycidyl ether, bisphenol F diglycidyl ether, and their derivatives under controlled conditions analyzed using liquid chromatography coupled with tandem mass spectrometry

Bisphenol A diglycidyl ether (BADGE), bisphenol F diglycydyl ether (BFDGE), and their related compounds are widely used as precursors in production of epoxy resins. The high reactivity of these compounds makes the development of analytical methodologies that ensure appropriate metrological accuracy crucial. Consequently, we aimed to determine whether and to what extent the composition of the solution and storage conditions affect the stability of selected BADGE and BFDGE derivatives. The stabilities of these compounds were studied using liquid chromatography–tandem mass spectrometry with electrospray ionization (HPLC-ESI–MS/MS). The chromatographic method elaborated here has allowed for separation of the analytes in time shorter than 6 min, for both methanol and acetonitrile-based mobile phases. The obtained calibration curves for all analytes were linear in the range tested. The values of limit of detection (LODs) were in the range of 0.91–2.7 ng/mL, while values of limit of quantitation (LOQs) were in the range of 2.7–5.7 ng/mL. The chosen experimental conditions were compared in terms of the content of organic solvent in solution, storage temperature, and time. Our results show that the content of BADGE, BADGE·HCl, BFDGE, three-ring NOGE decreased with increasing water content (> 40% v/v). For BADGE and three-ring NOGE, significant changes in concentration were noted as early as 24 h after the test solutions had been prepared. In addition, a reduction in the storage temperature (4 to − 20 °C) reduced the rate of transformation of the monitored analytes. Our study will increase quality control in future research and may increase the reliability of the obtained results.

Terahertz spectroscopy of Bisphenol "A", "AF", "S", "E" and the interrelationship between their molecular vibrations

Bisphenol "A" is a widespread environmental hormone. After the prohibition on the use of BPA in some applications, it is progressively replaced by its variants. However, these variants of Bisphenol "A" are also noxious. It is therefore of the utmost importance to find the similarity among these materials and put all of them under restriction to avoid harmful effects. Therefore, Bisphenol "A", "AF", "E", and "S" are studied by Terahertz spectroscopy (0.5-2.5 THz). Various molecular vibrations are found and assigned based on density-functional-theory calculations. Refractive Indices are calculated as well. The principal component analysis reveals the critical vibrational frequencies for their detection and shows the correlation between them.

Mass flows and removal of eight bisphenol analogs, bisphenol A diglycidyl ether and its derivatives in two wastewater treatment plants in New York State, USA

Despite high production and usage of bisphenols including bisphenol A (BPA) as well as bisphenol A diglycidyl ether and its derivatives (BADGEs), little is known about the occurrence and fate of these substances in wastewater treatment plants (WWTPs) in the U.S. In this study, we investigated the occurrence, removal, mass flows, and fate of eight bisphenol analogues and six BADGEs based on the concentrations measured in influent, primary effluent, final effluent, and sludge from two WWTPs (WWTP_A and WWTP_B) in the Albany area of New York State, USA. BPA, bisphenol F, bisphenol S, and BADGE·2H₂O were the predominant compounds found in influents of both WWTPs, at respective geometric mean (GM) concentrations of 90.0, 90.2, 31.2, and 6.48 ng/L in WWTP_A, and 53.3, <MLOQ, 27.6, 2.25 ng/L in WWTP_B. Incomplete removal of these compounds was observed in both WWTPs with the highest removal rate (52%) was found for BPA after the secondary treatment in WWTP_A. The fraction of BPA sorbed to suspended particulate matter (SPM) was 6.83%. Mean daily mass loadings of total bisphenols and BADGEs ranged from 9.2 [∑(BADGEs) in WWTP_B] to 226 mg/d/1000 inhabitants [∑(BPs) in WWTP_A]. The environmental emission rates of total bisphenols and BADGEs through effluent discharges from WWTPs ranged from 13.7 [∑(BADGEs) in WWTP_B] to 246 mg/d/1000 inhabitants [∑(BPs) in WWTP_A]. Overall, bisphenols and BADGEs were not removed completely by activated sludge treatment. Furthermore, formation of bisphenols from the degradation of microplastics or other precursors such as alkylated bisphenols, in WWTPs is suggested.

Binary Mixtures of Selected Bisphenols in the Environment: Their Toxicity in Relationship to Individual Constituents

Bisphenol A (BPA) is one of the most popular and commonly used plasticizer in the industry. Over the past decade, new chemicals that belong to the bisphenol group have increasingly been used in industrial applications as alternatives to BPA. Nevertheless, information on the combined effects of bisphenol (BP) analogues is insufficient. Therefore, our current study aimed to find the biological response modulations induced by the binary mixtures of BP compounds. We determined the toxicity levels in Microtox and XenoScreen YES/YAS assays for several BP analogs alone, and for their binary mixtures. The results obtained constituted the database for chemometric intelligent data analysis to evaluate the possible interactions occurring in the mixtures. Several chemometric/biophysical models have been used (concentration addition—CA, independent action—IA and polynomial regression calculations) to realize this aim. The best fitting was found for the IA model and even in this description strong evidence for synergistic behaviors (modes of action) of some bisphenol analogue mixtures was demonstrated. Bisphenols A, S, F and FL were proven to be of significant endocrine threat (with respect to XenoScreen YES/YAS assay); thus, their presence in mixtures (including presence in tissues of living organisms) should be most strictly monitored and reported.