Understanding effect of interaction of nanoparticles and antibiotics on bacteria survival under aquatic conditions: Knowns and unknowns

Effects of Mixtures of Engineered Nanoparticles and Cocontaminants on Anaerobic Digestion

The widespread application of nanotechnology inevitably leads to an increased release of engineered nanoparticles (ENPs) into the environment. Due to their specific physicochemical properties, ENPs may interact with other contaminants and exert combined effects on the microbial community and metabolism of anaerobic digestion (AD), an important process for organic waste reduction, stabilization, and bioenergy recovery. However, the complicated interactions between ENPs and other contaminants as well as their combined effects on AD are often overlooked. This review therefore focuses on the co-occurrence of ENPs and cocontaminants in the AD process. The key interactions between ENPs and cocontaminants and their combined influences on AD are summarized from the available literature, including the critical mechanisms and influencing factors. Some sulfides, coagulants, and chelating agents have a dramatic "detoxification" effect on the inhibition effect of ENPs on AD. However, some antibiotics and surfactants increase the inhibition of ENPs on AD. The reasons for these differences may be related to the interactive effects between ENPs and cocontaminants, changes of key enzyme activities, adenosine triphosphate (ATP) levels, reactive oxygen species (ROS) production, and microbial communities. New scientific opportunities for a better understanding of the coexistence in real world situations are converging on the scale of nanoparticles.

Differential toxicity of various mineral nanoparticles to Synechocystis sp.: With and without ciprofloxacin

Mineral nanoparticles (M-NPs) are ubiquitous in aquatic environments, but their potential harms to primary producers and impacts on the toxicity of coexisting pollutants are largely unknown. Herein, the toxicity mechanisms of various M-NPs (i.e., SiO2, Fe2O3, Al2O3, and TiO2 NPs) to Synechocystis sp. in absence and presence of ciprofloxacin (CIP) were comprehensively investigated. The heteroaggregation of cells and M-NPs can hinder substrate transfer or light acquisition. The attraction between Synechocystis sp. and M-NPs increased in the order of SiO2 < Fe2O3 < Al2O3 ≈ TiO2 NPs. Therefore, SiO2 and Fe2O3 NPs exerted slight effects on physiology and proteome of Synechocystis sp.. Al2O3 NPs with the rod-like shape caused physical damage to cells. Differently, TiO2 NPs with photocatalytic activities provided photogenerated electrons for Synechocystis sp., promoting photosynthesis and the Calvin cycle for CO2 fixation. SiO2, Fe2O3, and Al2O3 NPs alleviated the toxicity of CIP in an adsorption-depended manner. Conversely, the combination of CIP and TiO2 NPs exerted more pronounced toxic effects compared to their individuals, and CIP disturbed the extracellular electron transfer from TiO2 NPs to cells. The findings highlight the different effects of TiO2 NPs from other M-NPs on cyanobacteria, either alone or in combination with CIP, and improve the understanding of toxic mechanisms of M-NPs.

Undesirable consequences of the metallic nanoparticles action on the properties and functioning of Escherichia coli, Bacillus cereus and Staphylococcus epidermidis membranes

Controversial and inconsistent findings on the toxicity of metallic nanoparticles (NPs) against many bacteria are common in recorded studies; therefore, further advanced experimental work is needed to elucidate the mechanisms underlying nanotoxicity. This study deciphered the direct effects of Ag-NPs, Cu-NPs, ZnO-NPs and TiO₂-NPs on membrane permeability, cytoplasmic leakage, ATP level, ATPase activity and fatty acid profiling of Escherichia coli, Bacillus cereus and Staphylococcus epidermidis as model microorganisms. A multifaceted analysis of all collected results indicated the different influences of individual NPs on the measured parameters depending on their type and concentration. Predominantly, membrane permeability was correlated with increased cytoplasmic leakage, reduced total ATP levels and ATPase activity. The established fatty acid profiles were unique and concerned various changes in the percentages of hydroxyl, cyclopropane, branched and unsaturated fatty acids. Decisively, E. coli was more susceptible to changes in measured parameters than B. cereus and S. epidermidis. Also, it was established that ZnO-NPs and Cu-NPs had a major differentiating impact on studied parameters. Additionally, bacterial cell imaging using scanning electron microscopy elucidated different NPs distributions on the cell surface. The presented results are believed to provide novel, valuable and accumulated knowledge in the understanding of NPs action on bacterial membranes.

A mechanistic study of ciprofloxacin adsorption by goethite in the presence of silver and titanium dioxide nanoparticles

The adsorption behaviors of ciprofloxacin (CIP), a fluoroquinolone antibiotic, onto goethite (Gt) in the presence of silver and titanium dioxide nanoparticles (AgNPs and TiO₂NPs) were investigated. Results showed that CIP adsorption kinetics in Gt with or without NPs both followed the pseudo-second-order kinetic model. The presence of AgNPs or TiO₂NPs inhibited the adsorption of CIP by Gt. The amount of inhibition of CIP sorption due to AgNPs was decreased with an increase of solution pH from 5.0 to 9.0. In contrast, in the presence of TiO₂NPs, CIP adsorption by Gt was almost unchanged at pHs of 5.0∼6.5 but was decreased with an increase of pH from 6.5 to 9.0. The mechanisms of AgNPs and TiO₂NPs in inhibiting CIP adsorption by Gt were different, which was attributed to citrate coating of AgNPs resulting in competition with CIP for adsorption sites on Gt, while TiO₂NPs could compete with Gt for CIP adsorption. Additionally, CIP was adsorbed by Gt or TiO₂NPs through a tridentate complex involving the bidentate inner-sphere coordination of the deprotonated carboxylic group and hydrogen bonding through the adjacent carbonyl group on the quinoline ring. These findings advance our understanding of the environmental behavior and fate of fluoroquinolone antibiotics in the presence of NPs.

Enhanced Plasmon Based Ag and Au Nanosystems and Their Improved Biomedical Impacts

Numerous specialists and academics have backed the improved physicochemical characteristics of metal substrate (Ag, Au) based composite nanoparticles for a number of applications, including pharmaceuticals, optoelectronics, and environmental impact. Insights of Ag and Au NPs-based nanomaterials will be discussed, as well as important production, physicochemical, and biotechnological characteristics. The plasmon capacities of Ag and Au NPs, along with their customisable form, scale, and surface modification could be described by specified geometries and constituent contents. It was revealed that interaction dynamics of Ag and Au implanted nanomaterials with dopants/defects ratios seem to be more effective in stimulating pathogens by interrupting biochemical reactions. As a result, we focus on defect science in Ag and Au-based nanoscale materials, taking into account surface morphology, ionic packing, and chemical phase assessment. This chapter will cover the important optical, geometrical, and physicochemical features of Ag and Au nanomaterials, and their pharmacological significance.

Removal of amoxicillin from wastewater in the presence of H2O2 using modified zeolite Y- MgO catalyst: An optimization study

In this paper, Zeolite-MgO was generated using alkali-thermal method and was utilized as a catalyst to decrease amoxicillin (AMX) concentration in the presence of H₂O₂ from wastewater. Different tests like Fourier-transform infrared (FTIR), Brunauer-Emmett-Teller (BET), field emission scanning electron microscopy-energy dispersive X-ray analysis (FESEM-EDX), thermogravimetric analysis (TGA), and X-ray diffraction (XRD) were done to determine catalyst properties. Active groups of C-S-C, CO, CC, C-N, C-O, N-O, and N-H were identified in catalyst frame. According to XRD results, lower crystallinity of nanoparticles after modification of zeolite by MgO can lead to improvement of AMX removal. Active surface of zeolite (2.32 m²/g) was increased after optimization by MgO to 2.96 m²/g, indicating an increase in the catalyst capacity for activation of H₂O₂. In addition, furnace temperature (200-500 °C), residence time in the furnace (1-4 h), and Mg(NO₃)₂: zeolite ratio (0.25: 2, 0.5:2, 1:2 w/w) were studied to achieve the optimized catalyst for AMX removal. Different parameters like pH (5-9), H₂O₂ concentration (0-6 mL/100 mL), dose of catalyst (0-10 g/L), AMX concentration (50-300 mg/L), and reaction time (10-130 min) were also studied. The best efficiency (97.9%) of AMX removal was achieved at acidic pH with the lowest amount of H₂O₂ (0.1 mL/100 mL) and 7 g/L of catalyst. AMX removal using the developed process followed pseudo-first-order kinetics. Reclaimable Zeolite-MgO catalyst can be effectively utilized in wastewater works.

Long-term and stable antimicrobial properties of immobilized Ni/TiO2 nanocomposites against Escherichia coli, Legionella thermalis, and MS2 bacteriophage

Nickel has been extensively used as a high work function metal because of its abundance, low cost, relatively non-toxic nature, and environmentally benign characteristics. However, it has rarely been extended in a form of immobilized composite, which is a practical strategy applicable for photocatalytic antimicrobial activities. In this study, a composite of nickel and TiO₂ (Ni/TiO₂) was prepared using a photodeposition method, and its antibacterial properties were investigated using Escherichia coli (E. coli). To optimize Ni/TiO₂ synthesis, the effect of various photodeposition conditions on antibacterial performance were investigated, such as the light irradiation time, metal content, TiO₂ crystalline structure, and presence or absence of electron donors (i.e., methanol). The optimized 2 wt% Ni/TiO₂ exhibited an antibacterial efficiency of 3.74 log within 7 min, which is more than 10-fold higher than that of pristine TiO₂ (2.54 log). Based on this optimized weight ratio, Ni/TiO₂ was immobilized on a steel mesh using an electrospray/thermal compression method, and its antibacterial performance was further assessed against E. coli, MS2 bacteriophage virus (MS2 phage), and a common pulmonary pathogen (Legionella thermalis, L. thermalis). Within 70 min, all target microorganisms achieved an inactivation that exceeded 4 log. Furthermore, the long-term stability and sustainable usability of the Ni/TiO₂ mesh were confirmed by performing more than 50 antibacterial evaluation cycles using E. coli. The results of this study facilitate the successful utilization of immobilized Ni/TiO₂ mesh in water disinfection applications.

Evaluation of recreational risks due to exposure of antibiotic-resistance bacteria from environmental water: A proposed framework

This research provides a framework for the human health risk assessment due to exposure of AR (antibiotic resistance) E. coli from recreational water (swimming activity). Literature-based epidemiological studies were used for f-value formulation (i.e., AR E. coli/total number of E. coli isolates) and the theoretical calculation of AR and non-AR E. coli concentrations. Risk was estimated using calculated values by considering four different dose-response (D-R) scenarios with known characteristics due to current lack of availability of D-R for AR bacteria. f-values ranged between 0.14 and 0.59 and the order of calculated theoretical values of maximum AR E. coli are as follows: ampicillin or amoxicillin (38 CFU/dip) > co-trimoxazole (19 CFU/dip) ~ tetracycline (18 CFU/dip) > ceftriaxone or cefotaxime or ceftazidime (10 CFU/dip) ~ ciprofloxacin or ofloxacin (9 CFU/dip). The risk of infection was considerably high for theoretical calculated concentration values regardless of the chosen D-R model (annual risk of infection (95th percentile) = 1, Spearman's rank correlation coefficient = -0.06 to 0.94), under the conditions studied. Further, AR levels of human gastrointestinal-tract were determined using literature-reported data in stool samples and indicated that the resistance level was very high in healthy human (range: 3.7 × 10⁷-8.4 × 10⁷ CFU/g of wet lumen content). The maximum allowable concentration values for AR E. coli and non-ARB (0.0075 CFU/dip and 2.56 CFU/dip) were found to be smaller than the USEPA recreational water quality guidelines (≤126 CFU/100 mL), which can help the USEPA and other regulatory bodies in revisiting the current guidelines. So based on the noted results, we can conclude that the maintenance of inventory of actual measured concentration of ARB in the recreational water sites is needed to prevent unwanted complication related to the treatment of infectious sustained by resistant microbes.

Gold, Silver, and Palladium Nanoparticles: A Chemical Tool for Biomedical Applications

Herein, the role of metal-based nanoparticles (NPs) in biomedical analysis and the treatment of critical deceases been highlighted. In the world of nanotechnology, noble elements such as the gold/silver/palladium (Au/Ag/Pd) NPs are the most promising emerging trend to design bioengineering materials that could to be employed as modern diagnostic tools and devices to combat serious diseases. NPs are considered a powerful and advanced chemical tool to diagnose and to cure critical ailments such as HIV, cancer, and other types of infectious illnesses. The treatment of cancer is the most significant application of nanotechnology which is based on premature tumor detection and analysis of cancer cells through Nano-devices. The fascinating characteristic properties of NPs-such as high surface area, high surface Plasmon resonance, multi-functionalization, highly stable nature, and easy processing-make them more prolific for nanotechnology. In this review article, the multifunctional roles of Au/Ag/Pd NPs in the field of medical science, the physicochemical toxicity dependent properties, and the interaction mechanism is highlighted. Due to the cytotoxicity of Ag/Au/Pd NPs, the conclusion and future remarks emphasize the need for further research to minimize the toxicity of NPs in the bio-medicinal field.

Toxicity of Carbon, Silicon, and Metal-Based Nanoparticles to the Hemocytes of Three Marine Bivalves

Simple Summary

The growing nanotechnology industry disposes of a variety of nanoparticles with different physiochemical properties in everyday life. However, the dependence of the safety and toxicity of nanoparticles on their physicochemical properties remains unclear. Bivalve molluscs represent an efficient model for the investigation of nanoparticle toxicity owing to their filtrating ability and feeding on particles suspended in the water. Moreover, the blood cells of bivalve molluscs, the hemocytes, have been suggested as a good analog test-object to mammalian immune cells, phagocytes. In this study, we used hemocytes of three marine bivalve species, namely, Crenomytilus grayanus, Modiolus modiolus, and Arca boucardi, to evaluate and compare the toxic effects of 10 different types of nanoparticles. We gave short-term exposure of the nanoparticles to the hemocytes and registered viability and changes in their cell membrane polarization by employing flow cytometry. Metal-based nanoparticles were the most toxic to the cells of all three tested bivalve mollusc species. However, the sensitivity to different nanoparticle types varied between species. Moreover, the registered cell membrane depolarization indicated an early toxic response and raised concern that chronic long-term exposure of nanoparticles (even if they were previously declared as safe) is a serious threat for aquatic organisms.

Abstract

Nanoparticles (NPs) have broad applications in medicine, cosmetics, optics, catalysis, environmental purification, and other areas nowadays. With increasing annual production of NPs, the risks of their harmful influence on the environment and human health are also increasing. Currently, our knowledge about the mechanisms of the interaction between NPs and living organisms is limited. The marine species and their habitat environment are under continuous stress owing to the anthropogenic activities, which result in the release of NPs in the aquatic environment. We used a bioassay model with hemocytes of three bivalve mollusc species, namely, Crenomytilus grayanus, Modiolus modiolus, and Arca boucardi, to evaluate the toxicity of 10 different types of NPs. Specifically, we compared the cytotoxic effects and cell-membrane polarization changes in the hemocytes exposed to carbon nanotubes, carbon nanofibers, silicon nanotubes, cadmium and zinc sulfides, Au-NPs, and TiO₂ NPs. Viability and the changes in hemocyte membrane polarization were measured by the flow cytometry method. The highest aquatic toxicity was registered for metal-based NPs, which caused cytotoxicity to the hemocytes of all the studied bivalve species. Our results also highlighted different sensitivities of the used tested mollusc species to specific NPs.