Enhanced kinetics and super selectivity toward Cs+ in multicomponent aqueous solutions: A robust Prussian blue analogue/polyvinyl chloride composite membrane

Amino modified nanofibers anchored to Prussian blue nanoparticles selectively remove Cs+ from water

To improve the selective separation performance of silica nanofibers (SiO2 NFs) for cesium ions (Cs+) and overcome the defects of Prussian blue nanoparticles (PB NPs), PB/SiO2-NH2 NFs were prepared to remove Cs+ from water. Among them, 3-aminopropyltriethoxysilane (APTES) underwent an alkylation reaction with SiO2, resulting in the formation of a dense Si-O-Si network structure that decorated the surface of SiO2 NFs. Meanwhile, the amino functional groups in APTES combined with Fe3+ and then reacted with Fe2+ to form PB NPs, which anchored firmly on the aminoated SiO2 NFs surface. In our experiment, the maximum adsorption capacity of PB/SiO2-NH2 NFs was 111.38 mg/g, which was 31.5 mg/g higher than that of SiO2 NFs. At the same time, after the fifth cycle, the removal rate of Cs+ by PB/SiO2-NH2 NFs adsorbent was 75.36% ± 3.69%. In addition, the adsorption isotherms and adsorption kinetics of PB/SiO2-NH2 NFs were combined with the Freundlich model and the quasi-two-stage fitting model, respectively. Further mechanism analysis showed that the bond between PB/SiO2-NH2 NFs and Cs+ was mainly a synergistic action of ion exchange, electrostatic adsorption and membrane separation.

Constructing porous ZnFC-PA/PSF composite spheres for highly efficient Cs+ removal

Radioisotope leaking from nuclear waste has become an intractable problem due to its gamma radiation and strong water solubility. In this work, a novel porous ZnFC-PA/PSF composite sphere was fabricated by immobilization of ferrocyanides modified zinc phytate into polysulfone (PSF) substrate for the treatment of Cs-contaminated water. The maximum adsorption capacity of ZnFC-PA/PSF was 305.38 mg/g, and the removal efficiency of Cs+ was reached 94.27% within 2 hr. The ZnFC-PA/PSF presented favorable stability with negligible dissolution loss of Zn2+ and Fe2+ (< 2%). The ZnFC-PA/PSF achieved high-selectivity towards Cs+ (Kd = 2.24×104 mL/g) even in actual geothermal water. The adsorption mechanism was inferred to be the ion-exchange between Cs+ and K+. What's more, ZnFC-PA/PSF worked well in the fixed-bed adsorption (E = 91.92%), indicating the application potential for the hazardous Cs+ removal from wastewater.

Fabrication of cobalt-iron Prussian blue analogues functionalized hybrid membranes for efficiently capturing Tl from water: Performance and mechanism

As trace levels of thallium (Tl) in water are lethal to humans and ecosystems, it is essential to exploit advanced technologies for efficient Tl removal. In response to this concern, an innovative composite membrane was developed, incorporating polytetrafluoroethylene (PTFE) and featuring a dual-support system with polydopamine (PDA) and polyethyleneimine (PEI), along with bimetallic Prussian blue analogues (Co@Fe-PBAs) as co-supports. The composite membrane exhibited an exceptional Tl+-adsorption capacity (qm) of 186.1 mg g-1 when utilized for the treatment of water containing low concentration of Tl+ (0.5 mg⋅L-1). Transmission electron microscopy displayed the obvious Tl+ mapping inside the special hollow Co@Fe-PBAs crystals, demonstrating the deep intercalation of Tl+ via ion exchange and diffusion. The Tl+-adsorption capability of the composite membrane was not greatly affected by coexisting Na+, Ca2+ and Mg2+ as well as the tricky K+, indicating the excellent anti-interference. Co-doped PBAs enhanced ion exchange and intercalation of the composite membrane with Tl+ leading to excellent Tl+ removal efficiency. The composite membrane could efficiently remove Tl+ from thallium-contaminated river water to meet the USEPA standard. This study provides a cost-effective membrane-based solution for efficient Tl+ removal from Tl+-containing wastewater.

Magnetic Prussian blue nanoshells are controllable anchored on the surface of molybdenum disulfide nanosheets for efficient separation of radioactive cesium from water

The rapid development of nuclear energy in China has led to increased attention to the treatment of radioactive wastewaters. Herein, a novel magnetic adsorbent, magnetic Prussian blue‑molybdenum disulfide (PB/Fe3O4/MoS2) nanocomposite, was prepared by a simple in-situ fixation of ferric oxide nanoparticles (Fe3O4 NPs) and Prussian Blue (PB) shell layers on the surface of molybdenum disulfide (MoS2) nanosheets carrier. The prepared PB/Fe3O4/MoS2 nanocomposites adsorbent displayed excellent fast magnetic separation and adsorption capacity of Cs+ (Qm = 80.51 mg/g) from water. The adsorption behavior of Cs+ by PB/Fe3O4/MoS2 conformed to Langmuir isothermal and second-order kinetic model, which belonged to chemical adsorption and endothermic reaction. The equilibrium adsorption capacity of PB/Fe3O4/MoS2 to Cs+ has reached 90 % in less than 110 min. Moreover, the adsorption properties of PB/Fe3O4/MoS2 remained good in the pH range of 2-7. Based on this, PB/Fe3O4/MoS2 complex was a fast and high selectivity adsorption material for Cs+, which was expected to be used in the practical treatment of cesium-containing radioactive wastewater.

Zein-enhanced sodium alginate/thiostannate microsphere adsorbent Zein@SA/KBS for efficient removal of cesium from wastewater

Although efficient removal of Cs from wastewater is of great importance because of the nuclear energy sustainable development and public health, removing cesium is challenging for the high concentrations of sodium and potassium ions coexist. In this work, we synthesized the first novel bismuth-doped layered tin sulfide (KBS) and applied it to the efficient green adsorption of liquid cesium resources. KBS could reach the adsorption equilibrium for Cs+ within only 2 min with a theoretical adsorption capacity of 425.55 mg/g. Furthermore, the adsorption performance remained reliable after 10 cycles of use. The structure and properties of KBS were explained at the molecular level by DFT calculations, and the calculated results were in sound agreement with the experimental data. Meanwhile, in this study, the material was reinforced and shaped by the electrostatic interaction of Zein and sodium alginate hydrogel, and finally, Zein@SA/KBS spherical composite adsorbent was obtained. The problem of the difficult recovery of adsorbent and the secondary contamination was solved. The adsorption performance of Zein@SA/KBS on Cs+ was better than most composite adsorbents and showed reliable stability. Therefore, the new microspherical adsorbent (Zein@SA/KBS) has great potential for industrial application in removing radioactive cesium from wastewater.

A Prussian blue analog-based copper-aluminum layered double hydroxide for cesium removal from water: fabrication, density functional theory-based molecular modeling, and the adsorption mechanism

A new type of adsorbent, a Prussian blue analog-based copper-aluminum layered double hydroxide (PBA@CuAl-LDH), was successfully synthesized using a one-step method for the removal of radioactive Cs+ from wastewater. The adsorption performance, characteristics and the underlying adsorption mechanism of PBA@CuAl-LDH were systematically examined. The results showed that PBA@CuAl-LDH exhibited excellent adsorption performance, with a maximum adsorption capacity of 109.2 mg g-1. Over 85% of PBA@CuAl-LDH can be recycled, and the material exhibited only a 6.6% loss in adsorption performance. The adsorption process was well-fitted using the pseudo-second-order kinetic model and the Freundlich isotherm model, revealing the surface heterogeneity of the composite adsorbent. A molecular model of PBA@CuAl-LDH was constructed by combining density functional theory and multiple instrumental characterization techniques. Our results indicate that PBA crystals can be generated between layers and on the surface. Ion exchange was revealed as the main adsorption mechanism of Cs+ by PBA@CuAl-LDH. Specifically, the interstitial spaces of the PBA crystals generated between the layers and on the surface played an important role in ion exchange. These findings provide concrete theoretical support for radioactive pollution control and have significant value in directing the fabrication of cesium removal materials and their future engineering application.

Construction of a novel ursolic acid-based supramolecular gel for efficient removal of iodine from solution

Pentacyclic triterpenes is a natural amphipathic product which possess a rigid backbone and several polar functional groups such as hydroxyl, carbonyl and carboxyl groups. The amphipathic character makes it easy to realize self-assemble into complex nano structure and therefore attract extensive attention due to the simple synthetic processes and renewable raw materials. Hence, a novel Ursolic acid-based hydrogel was prepared successfully via a simple self-assembly of triterpenoid derivative in methanol by capture water molecule in air. The resulting hydrogel show a porous morphology and good elasticity including strong heat resistance. Based on the characteristic above, the hydrogel showed a good iodine adsorption capacity and can removal 75.0% of the iodine from cyclohexane solution and 66.3% from aqueous solution within 36 h. Data analysis indicate that all the iodine adsorption process are dominated by chemisorption and belongs to the multi-site adsorption on heterogenous surfaces. In addition, the obtained hydrogel also possesses a good recyclability which can maintain more than 82% of its capacity after 5 cycles. The simple preparation method and easily available raw materials endow it a great potential in future pollutant treatment.

Highly selective and easily regenerated porous fibrous composite of PSF-Na2.1Ni0.05Sn2.95S7 for the sustainable removal of cesium from wastewater

The removal of ¹³⁷Cs from radioactive wastewater remains a huge challenge due to the interference of many coexisting ions. Several tin chalcogenides (X₂Sn₃Y₇, XNa, K; YTe, Se, S) were synthesized and screened for highly selective cesium removal from radioactive wastewater. It was found that Na₂Sn₃S₇ showed the best adsorption performance for low cesium concentrations. Especially after nickel doping, the adsorption capacity and thermal stability of the adsorbent were significantly enhanced. Its maximum adsorption capacity reached 436.72 mg·g^-1 within only 5 min and adsorption performance kept active in the pH range of 2-12. After being coated with a porous polysulfone (PSF) fiber, the developed PSF-Na_2.1Ni_0.05Sn_2.95S₇ was applied to natural complex water with cesium concentration of 17.58 mg·L^-1. The separation factors between Cs⁺ and competitive ions ranged from 625.21 to 13123.21. It is noteworthy that NaNO₃ was an efficient regenerating agent and can be easily separated from the CsNO₃ mixture for cyclic utilization. Remarkably, only 45 min in each cycle of adsorption and desorption toward cesium was realized, and the adsorption properties hardly decreased even after 50 consecutive cycles. The above advantages make the proposed material an excellent candidate for efficient Cs⁺ removal and enrichment from wastewater.

Prussian blue analogs-based layered double hydroxides for highly efficient Cs+ removal from wastewater

In this work, novel Prussian blue analogs-based layered double hydroxide (PBA@ZnTi-LDH) was in situ synthesized and used for radioactive Cs⁺ removal from wastewater. The results suggested that this PBA@ZnTi-LDH prepared using LDH as skeleton and transition metal source showed higher adsorption capacity (243.9 mg/g) and water stability than conventional PBAs, and promising application in scale-up Cs⁺ removal. Thus, it was granulated by calcium alginate and the PBA@ZnTi-LDH/CaALG exhibited favorable post-separation and fixed-bed adsorption ability at different Cs⁺ concentrations and flow rates, highlighting its application perspective on Cs⁺ removal from various kinds of wastewater. Moreover, the real-world Cs⁺ removal was preliminarily explored using natural complex Cs⁺-containing water. As a result, this stable and easily separated PBA@ZnTi-LDH/CaALG showed high removal efficiency, selectivity and good reusability, which was promising in scale-up Cs⁺ removal from the real-world wastewater.