The release inhibition of organic substances from microplastics in the presence of algal derived organic matters: Influence of the molecular weight-dependent inhibition heterogeneities

Application of FTIR two-dimensional correlation spectroscopy (2D-COS) analysis in characterizing environmental behaviors of microplastics: A systematic review

Microplastics (MPs) are ubiquitous in the environment, continuously undergo aging processes and release toxic chemical substances. Understanding the environmental behaviors of MPs is critical to accurately evaluate their long-term ecological risk. Generalized two-dimensional correlation spectroscopy (2D-COS) is a powerful tool for MPs studies, which can dig more comprehensive information hiding in the conventional one-dimensional spectra, such as infrared (IR) and Raman spectra. The recent applications of 2D-COS in analyzing the behaviors and fates of MPs in the environment, including their aging processes, and interactions with natural organic matter (NOM) or other chemical substances, were summarized systematically. The main requirements and limitations of current approaches for exploring these processes are discussed, and the corresponding strategies to address these limitations and drawbacks are proposed as well. Finally, new trends of 2D-COS are prospected for analyzing the properties and behaviors of MPs in both natural and artificial environmental processes.

Mechanism of microplastics effects on the purification of heavy metals in piggery effluents by microalgae

Microalgae is an effective bioremediation technique employed for treating piggery effluent. However, there is insufficient study on how the presence of microplastics (MPs) in wastewater affects the ability of microalgae to remove heavy metals from piggery effluent. This study aims to investigate the influence of two prevalent heavy metals found in piggery wastewater, Cu2+ (2 mg/L) and Zn2+ (2 mg/L), on their removal by microalgae (Desmodesmus sp. CHX1) in the presence of four types of MPs: polyethylene (PE), polyvinyl chloride (PVC), polypropylene (PP), and polyethylene terephthalate (PET). The results revealed that smaller particle size MPs promoted chlorophyll accumulation, while larger particles inhibits it. Additionally, higher concentrations of MPs promoted chlorophyll accumulation, while lower concentrations inhibited it. As for heavy metals, the presence of microplastics reduced the removal efficiency of Cu2+ and Zn2+ by Desmodesmus sp. CHX1. The highest inhibition of Cu2+ was 30%, 10%, 19%, and 16% of the control (CK), and the inhibition of Zn2+ was 7%, 4%, 4%, and 13%, respectively, under the treatments of PE, PVC, PP and PET MPs. Furthermore, Desmodesmus sp. CHX1 can secrete more extracellular polymeric substances (EPS) and form heterogeneous aggregates with MPs to counteract their pressure. These findings elucidate the impact of MPs on microalgae in bioremediation settings and offer useful insights into the complex relationships between microalgae, MPs, and heavy metals in the environment.

The adsorption of biogenetic odorants onto activated carbon: Adsorption characteristics and impacts of algal organic matter

Powdered activated carbon (PAC) adsorption is regarded as an efficient method for removing odorants from drinking water. However, in eutrophic aquatic environments, the presence of algal organic matter (AOM) produced by cyanobacteria considerably impedes the adsorption of odorous compounds by activated carbon. This study focused on investigating the adsorption characteristics of three representative odorants: 2-methylisoborneol (2-MIB), β-cyclocitral (β-cyclo), and butyl sulfide (BS) by PAC and the effects of AOM on the PAC adsorption of odorants. The removal of the three odorants reached 83.5-97.5% at a PAC dosage of 10 mg/L after 12 h of exposure in a competition-free scenario. The adsorption kinetics demonstrated higher conformity (R2 > 0.9) with the pseudo-second-order model, whereas the adsorption capacity exhibited stronger conformity (R2 > 0.9) with the Freundlich model. The presence of AOM resulted in varying levels of competition for PAC for the adsorption of the three odorants. As the concentration of AOM increased from 0 to 5 mg C/L, the removal of 2-MIB was the most affected (from 83.5% to 10.0%), followed by β-cyclo (from 86.6% to 55.0%), and BS (from 97.5% to 92.0%). The competitive adsorption of AOM at the molecular level was studied using density functional theory (DFT). The DFT results suggested that odorants with higher and more uniformly distributed electrostatic potentials exhibited a heightened affinity for PAC adsorption and a diminished susceptibility to disruption caused by AOM. This study provides valuable insights into the mitigation of odorous compounds during drinking water purification.

Complexation of copper algaecide and algal organic matter in algae-laden water: Insights into complex metal-organic interactions

Copper-based algicides have been widely used to suppress algae blooms; however, the release of algal organic matter (AOM) on account of cell lysis may cause significant changes in the mitigation, transformation, and bioavailability of Cu(II). In the present work, the binding characteristics of Cu(II) with AOM were explored via combinative characterization methods, such as high-performance size exclusion chromatography, differential absorption spectra analysis, and joint applications of two-dimensional correlation spectroscopy (2D-COS), as well as heterospectral 2D-COS and moving window 2D-COS analyses of UV, synchronous fluorescence, and FTIR spectra. Carboxyl groups displayed a preferential interaction to Cu(II) binding, followed by polysaccharides. The spectral changes of C]O stretching occur after the change of chromophores in complexation with Cu(II). The AOM chromophores exhibit obvious conformations at Cu(II) concentrations higher than 120 μM, while AOM fluorophores and functional groups exhibit the greatest changes at Cu(II) concentrations lower than 20 μM. All these observations have verified the presence of binding heterogeneity and indicate that AOM could interact with Cu(II) through diverse functional moieties. Therefore, our study contributes to the better understanding of the fate of Cu(II)-AOM complexes in aquatic systems.

Phototransformation of extracellular polymeric substances in activated sludge and their interaction with microplastics

Substantial amounts of extracellular polymeric substances (EPS) are present in sludge from wastewater treatment plants (WWTP), and EPS can significantly affect the fate, bioavailability, and toxicity of microplastics (MPs) that coexist in the effluent, however, the mechanism of action between EPS and microplastics remains unclear. In addition, ultraviolet (UV) disinfection is indispensable in the wastewater treatment process in WWTP, which can significantly affect the characteristics of EPS. Therefore, it is of great significance to study the photochemical characteristics of EPS and the effect on binding MPs. In this study, using multispectral technology and two-dimensional correlation spectroscopy analysis, indicates that the molecular weight and aromaticity of EPS after phototransformation were reduced. The results showed that the adsorption of EPS on PSMPs was in the order of TB-EPS > LB-EPS > S-EPS, which was positively correlated with the SUVA254, but negatively correlated with O/C of EPS. This indicates that the main adsorption mechanisms of PSMPs on EPS were π-π and hydrophobicity. The adsorption capacity of S-EPS, LB-EPS and TB-EPS to PSMPs decreased with the increasing of illumination time. After phototransformation, the adsorption sensitivity and reaction sequence of EPS and PSMPs did not change much. This research provides a theoretical basis for understanding the photochemical transformation of extracellular polymers and the morphology and migration of microplastics in sewage treatment, and evaluating the impact of microplastics on ecosystems.

A critical review on the interaction of polymer particles and co-existing contaminants: Adsorption mechanism, exposure factors, effects on plankton species

This review considers the interaction of microplastics (MPs)/nanoplastics (NPs) and co-existing contaminants, including organic contaminants, potentially toxic elements (PTEs), and metal/metal-oxide nanoparticles. Stronger adsorption between plastic particles and co-existing contaminants can either facilitate or prevent more contaminants to enter plankton. The characteristics of MPs/NPs, such as polymer type, size, functional groups, and weathering, affect combined effects. Mixture toxicity is affected by those factors simultaneously and also affected by the type of co-existing contaminants, their concentrations, exposure time, dissolved organic matter, and surfactant. For co-exposure involving organics and metal nanoparticles, marine Skeletonema costatum generally had antagonistic effects, while marine Chlorella pyrenoidosa, Platymonas subcordiformis, and Tetraselmis chuii, showed synergistic effects. For co-exposure involving organics and PTEs, both Chlorella sp. and Microcystis aeruginosa generally demonstrated antagonistic effects. Freshwater Chlorella reinhardtii and Scenedesmus obliquus had synergistic effects for co-exposure involving metal/metal oxide nanoparticles. Zooplankton shows more unpredicted sensitivity towards the complex system. Different co-existing contaminants have different metabolism pathways. Organic contaminants could be biodegraded, which may enhance or alleviate mixture toxicity. PTEs could be adsorbed and desorbed under changing environments, and further affect the combined effects. The presence of metal/metal-oxide nanoparticles is more complicated, since some may release ion metals, increasing contaminant composition.

Continuing progress in the field of two-dimensional correlation spectroscopy (2D-COS): Part III. Versatile applications

In this review, the comprehensive summary of two-dimensional correlation spectroscopy (2D-COS) for the last two years is covered. The remarkable applications of 2D-COS in diverse fields using many types of probes and perturbations for the last two years are highlighted. IR spectroscopy is still the most popular probe in 2D-COS during the last two years. Applications in fluorescence and Raman spectroscopy are also very popularly used. In the external perturbations applied in 2D-COS, variations in concentration, pH, and relative compositions are dramatically increased during the last two years. Temperature is still the most used effect, but it is slightly decreased compared to two years ago. 2D-COS has been applied to diverse systems, such as environments, natural products, polymers, food, proteins and peptides, solutions, mixtures, nano materials, pharmaceuticals, and others. Especially, biological and environmental applications have significantly emerged. This survey review paper shows that 2D-COS is an actively evolving and expanding field.

Changes of the physicochemical properties of extracellular polymeric substances (EPS) from Microcystis aeruginosa in response to microplastics

Microplastics (MPs) are ubiquitous in aquatic ecosystems and can significantly influence the growth, aggregation and functions of phytoplankton biomass. However, variations in the extracellular polymeric substances (EPS) of phytoplankton in terms of compositions and structures in response to MPs were still not reported. In this study, EPS matrix of Microsystis aeruginosa was applied and fractionated into loosely bound EPS (LB-EPS) and tightly bound EPS (TB-EPS) fractions, with the time-dependent changes in response to different concentrations (10, 100 and 500 mg/L) of MPs being explored via using the fluorescence excitation emission matrix coupled with parallel factor (EEM-PARAFAC) and two-dimensional Fourier transform infrared correlation spectroscopy (2D-FTIR-COS) analysis. Results showed that 500 mg/L of MP concentration significantly inhibited Microcystis growth by 30.5% but enhanced EPS secretion. In addition, organic composition in LB-EPS and TB-EPS varied differently in response to increased MP exposure, as the ratio of polysaccharide/protein increased in the TB-EPS but decreased in LB-EPS. Further analysis revealed obvious heterogeneities in organic component variations in response to MPs, as the C-O functional groups and glycosidic bonds in the TB-EPS preferentially responded, which lead to the domination of polysaccharides and humus substances; while the carbonyl, carboxyl and amino functional groups in the LB-EPS exhibited a preferential response, which caused the enhanced percentage of the tryptophan-like proteins. In addition to organic compositions, the aromaticity, hydrophobicity and humification in the LB-EPS fraction increased with enhanced MP exposure, which, as a result, may influence the ecotoxicological risk of MPs. Therefore, Microcystis can dynamically adjust not only the EPS contents but also the compositions in response to MPs exposure. The results can improve our understanding on the eco-physiological impact of phytoplankton-MP interaction in aquatic environment, and indicate that the dose-dependent and long-term effects of MPs on phytoplankton should be considered in future study.

The Inhibition of Microcystin Adsorption by Microplastics in the Presence of Algal Organic Matters

Microplastics (MPs) could act as vectors of synthetic chemicals; however, their influence on the adsorption of chemicals of natural origin (for example, MC-LR and intracellular organic matter (IOM), which could be concomitantly released by toxic Microcystis in water) is less understood. Here, we explored the adsorption of MC-LR by polyethylene (PE), polystyrene (PS), and polymethyl methacrylate (PMMA). The results showed that the MPs could adsorb both MC-LR and IOM, with the adsorption capability uniformly following the order of PS, PE, and PMMA. However, in the presence of IOM, the adsorption of MC-LR by PE, PS, and PMMA was reduced by 22.3%, 22.7% and 5.4%, respectively. This is because the benzene structure and the specific surface area of PS facilitate the adsorption of MC-LR and IOM, while the formation of Π-Π bonds favor its interaction with IOM. Consequently, the competition for binding sites between MC-LR and IOM hindered MC-LR adsorption. The C=O in PMMA benefits its conjunction with hydroxyl and carboxyl in the IOM through hydrogen bonding; thus, the adsorption of MC-LR is also inhibited. These findings highlight that the adsorption of chemicals of natural origin by MPs is likely overestimated in the presence of metabolites from the same biota.

Component structure and characteristic analysis of cyanobacterial organic matters

The characteristic analysis of cyanobacterial organic matters is an important premise of cyanobacterial organic pollution control. This paper investigated the component structure characteristics of algal organic matters (AOM) secreted and released by cyanobacteria in laboratory culture and actual Taihu Lake environment by spectroscopic quantitative and qualitative methods. Results showed that the secretion amount of AOM was mainly 4-6 μg COD/10⁶ cells during the growth period of Microcystis aeruginosa, and the content ratio of extracellular organic matters (EOM) to intracellular organic matters (IOM) gradually increased from 0.83 in adaptation and logarithmic period to 3.33 in stable and decay period. The secretion of IOM showed a decrease trend, which indicated the decrease of its synthesis or the gradual infiltration and loss caused by cell membrane damage. From the component characteristics, the EOM had lower SUVA value and higher proportion of small molecular substances with molecular weight <3 kDa, indicating its more difficult to separate from water than IOM. Compared with the laboratory culture environment, the actual Taihu Lake resulted in more obvious characteristic heterogeneity of cyanobacteria EOM and IOM.