Development of stable agar/carrageenan-Fe3O4-Klebsiella pneumoniae composite beads for efficient phenol degradation

Investigating the effect of electrosprayed alginate/PVA beads size on the microbial growth kinetics: Phenol biodegradation through immobilized activated sludge

The presence of cyclic organic compounds, including phenol, in the wastewater of many industries has made phenol removal an important issue. Meanwhile, the biological methods of removing phenol have attracted the attention of researchers in recent years. Recently, the use of immobilized microbial cells is proposed as a new approach in industrial wastewater treatment. In this research, the aim is to study the effect of immobilized beads size on the phenol biodegradation efficiency and specific microbial growth rate. For this purpose, electrospray technique was used to immobilize activated sludge in hybrid matrix of alginate and polyvinyl alcohol (PVA). The fabricated alginate/PVA beads were characterized using Fourier transform infrared spectroscopy (FTIR). Evaluation of the results related to the free and immobilized cell systems in the shake flask experiments showed that at low phenol concentrations the immobilized cell system had the same performance as the free cell system, while the immobilized cell system at higher concentrations had a better performance in removing phenol so that at a concentration of 2000 mg/L, removal percentage has increased from 15% to 25-34%. On the other hand, in this survey, the kinetic behavior of activated sludge was in good agreement with Haldane's equation. Moreover, the maximum specific growth rate was measured 0.033 and 0.041 (h^-1) beside 544 and 636 mg/L substrate inhibition constant, for free and immobilized cell systems, respectively. This result shows that the phenol biodegradation has been improved by using the cell immobilization technique especially with applying the smaller beads, which is due to improved mass transfer and microbial cell protection from harsh environments.

Recent advances in exploiting carrageenans as a versatile functional material for promising biomedical applications

Carrageenans are a group of biopolymers widely found in red seaweeds. Commercial carrageenans have been traditionally used as emulsifiers, stabilizers, and thickening and gelling agents in food products. Carrageenans are regarded as bioactive polysaccharides with disease-modifying and microbiota-modulating activities. Novel biomedical applications of carrageenans as biocompatible functional materials for fabricating hydrogels and nanostructures, including carbon dots, nanoparticles, and nanofibers, have been increasingly exploited. In this review, we describe the unique structural characteristics of carrageenans and their functional relevance. We summarize salient physicochemical features, including thixotropic and shear-thinning properties, of carrageenans. Recent results from clinical trials in which carrageenans were applied as both antiviral and antitumor agents and functional materials are discussed. We also highlight the most recent advances in the development of carrageenan-based targeted drug delivery systems with various pharmaceutical formulations. Promising applications of carrageenans as a bioink material for 3D printing in tissue engineering and regenerative medicine are systematically evaluated. We envisage some key hurdles and challenges in the commercialization of carrageenans as a versatile material for clinical practice. This comprehensive review of the intimate relationships among the structural features, unique rheological properties, and biofunctionality of carrageenans will provide novel insights into their biomedicine application potential.

Immobilization of bacterial mixture of Klebsiella variicola FH-1 and Arthrobacter sp. NJ-1 enhances the bioremediation of atrazine-polluted soil environments

In this study, the effects of the immobilized bacterial mixture (IM-FN) of Arthrobacter sp. NJ-1 and Klebsiella variicola strain FH-1 using sodium alginate-CaCl2 on the degradation of atrazine were investigated. The results showed that the optimal ratio of three types of carrier materials (i.e., rice straw powder, rice husk, and wheat bran) was 1:1:1 with the highest adsorption capacity for atrazine (i.e., 3774.47 mg/kg) obtained at 30°C. On day 9, the degradation efficiency of atrazine (50 mg/L) reached 98.23% with cell concentration of 1.6 × 108  cfu/ml at pH 9 and 30°C. The Box-Behnken method was used to further optimize the culture conditions for the degradation of atrazine by the immobilized bacterial mixture. The IM-FN could be reused for 2-3 times with the degradation efficiency of atrazine maintained at 73.0% after being stored for 80 days at 25°C. The population dynamics of IM-FN was explored with the total soil DNA samples specifically analyzed by real-time PCR. In 7 days, the copy numbers of both PydC and estD genes in the IM-FN were significantly higher than those of bacterial suspensions in the soil. Compared with bacterial suspensions, the IM-FN significantly accelerated the degradation of atrazine (20 mg/kg) in soil with the half-life shortened from 19.80 to 7.96 days. The plant heights of two atrazine-sensitive crops (wheat and soybean) were increased by 14.99 and 64.74%, respectively, in the soil restored by immobilized bacterial mixture, indicating that the IM-FN significantly reduced the phytotoxicity of atrazine on the plants. Our study evidently demonstrated that the IM-FN could significantly increase the degradation of atrazine, providing a potentially effective bioremediation technique for the treatment of atrazine-polluted soil environment and providing experimental support for the wide application of immobilized microorganism technology in agriculture.

Development of multifarious carrier materials and impact conditions of immobilised microbial technology for environmental remediation: A review

Microbial technology is the most sustainable and eco-friendly method of environmental remediation. Immobilised microorganisms were introduced to further advance microbial technology. In immobilisation technology, carrier materials distribute a large number of microorganisms evenly on their surface or inside and protect them from external interference to better treat the targets, thus effectively improving their bioavailability. Although many carrier materials have been developed, there have been relatively few comprehensive reviews. Therefore, this paper summarises the types of carrier materials explored in the last ten years from the perspective of structure, microbial activity, and cost. Among these, carbon materials and biofilms, as environmentally friendly functional materials, have been widely applied for immobilisation because of their abundant sources and favorable growth conditions for microorganisms. The novel covalent organic framework (COF) could also be a new immobilisation material, due to its easy preparation and high performance. Different immobilisation methods were used to determine the relationship between carriers and microorganisms. Co-immobilisation is particularly important because it can compensate for the deficiencies of a single immobilisation method. This paper emphasises that impact conditions also affect the immobilisation effect and function. In addition to temperature and pH, the media conditions during the preparation and reaction of materials also play a role. Additionally, this study mainly reviews the applications and mechanisms of immobilised microorganisms in environmental remediation. Future development of immobilisation technology should focus on the discovery of novel and environmentally friendly carrier materials, as well as the establishment of optimal immobilisation conditions for microorganisms. This review intends to provide references for the development of immobilisation technology in environmental applications and to further the improve understanding of immobilisation technology.

Construction of Magnetic Composite Bacterial Carrier and Application in 17β-Estradiol Degradation

Estrogen contamination is widespread and microbial degradation is a promising removal method; however, unfavorable environments can hinder microbial function. In this study, a natural estrogen 17β-estradiol (E2) was introduced as a degradation target, and a new combination of bacterial carrier was investigated. We found the best combination of polyvinyl alcohol (PVA) and sodium alginate (SA) was 4% total concentration, PVA:SA = 5:5, with nano-Fe3O4 at 2%, and maltose and glycine added to promote degradation, for which the optimal concentrations were 5 g·L−1 and 10 g·L−1, respectively. Based on the above exploration, the bacterial carrier was made, and the degradation efficiency of the immobilized bacteria reached 92.3% in 5 days. The immobilized bacteria were reused for three cycles, and the degradation efficiency of each round could exceed 94%. Immobilization showed advantages at pH 5, pH 11, 10 °C, 40 °C, and 40 g·L−1 NaCl, and the degradation efficiency of the immobilized bacteria was higher than 90%. In the wastewater, the immobilized bacteria could degrade E2 to about 1 mg·L−1 on the 5th day. This study constructed a bacterial immobilization carrier using a new combination, explored the application potential of the carrier, and provided a new choice of bacterial immobilization carrier.