Highly efficient metal-organic frameworks adsorbent for Pd(II) and Au(III) recovery from solutions: Experiment and mechanism

Controllable integration of nano zero-valent iron into MOFs with different structures for the purification of hexavalent chromium-contaminated water: Combined insights of scavenging performance and potential mechanism investigations

This work combined the stability of the porous structure of metal-organic frameworks with the strong reducibility of nano zero-valent iron, for the controllable integration of NZVI into MOFs to utilize the advantages of each component with enhancing the rapid decontamination and scavenging of Cr(VI) from wastewater. Hence, four kinds of MOFs/NZVI composites namely ZIF67/NZVI, MOF74/NZVI, MIL101(Fe)/NZVI, CuBTC/NZVI, were prepared for Cr(VI) capture. The results indicated that the stable structure of ZIF67, MOF74, MIL101(Fe), CuBTC, was beneficial for the dispersion of NZVI that could help more close contact between MOFs/NZVI reactive sites and Cr(VI), subsequently, MOFs/NZVI was proved to be better scavengers for Cr(VI) scavenging than NZVI alone. The Cr(VI) capture achieved the maximum adsorption capacity at pH ~ 4.0, which might be due to the participation of more H+ in the reaction and better corrosion of NZVI at lower pH. Mechanism investigation demonstrated synergy of adsorption, reduction and surface precipitation resulted in enhanced Cr(VI) scavenging, and Fe(0), dissolved and surface-bound Fe(II) were the primary reducing species. The findings of this investigation indicated that the as-prepared composites of ZIF67/NZVI, MOF74/NZVI, MIL101(Fe)/NZVI, CuBTC/NZVI, with high oxidation resistance and excellent reactivity, could provide reference for the decontamination and purification of actual Cr(VI)-containing wastewater.

Separation of Palladium by an Imine-Linked Cu(I)-Organic Framework

Selective capture of palladium (Pd) is one of the important works in science due to its high application and low content in the Earth's crust. To this end, we present herein a new Cu(I)-organic framework (ECUT-MOF-1) by introducing pyridine N active sites to chelate Pd(II). ECUT-MOF-1 demonstrated that the maximal adsorption capacity of Pd(II) was 350 mg/g in pH = 3 solution. In addition, kinetic analysis, cycle performance, selectivity, and adsorption mechanisms were also investigated. All of the results suggested its superior application in the recovery of Pd(II).

Multifunctional self-assembled adsorption microspheres based on waste bamboo shoot shells for multi-pollutant water purification

In this study, multilayer self-assembled multifunctional bamboo shoot shell biochar microspheres (BSSBM) were prepared, in which bamboo shoot shell biochar was used as the carrier, titanium dioxide as the intermediate medium, and chitosan as the adhesion layer. The adsorption behavior of BSSBM on heavy metals Ag(I) and Pd(II), antibiotics, and dye wastewater was systematically analyzed. BSSBM shows a wide range of adsorption capacity. BSSBM is a promising candidate for the purification of real polluted water, not only for metal ions, but also for Tetracycline (TC) and Methylene Blue (MB). The maximum adsorption amounts of BSSBM on Pd(II), Ag(I), TC and MB were 417.3 mg/g, 222.5 mg/g, 97.2 mg/g and 42.9 mg/g, respectively.The adsorption of BSSBM on Pd(II), MB and TC conformed to the quasi-first kinetic model, and the adsorption on Ag(I) conformed to the quasi-second kinetic model. BSSBM showed remarkable selective adsorption capacity for Ag(I) and Pd(II) in a multi-ion coexistence system. BSSBM not only realized the high value-added utilization of waste, but also had the advantages of low cost, renewable and selective adsorption. BSSBM demonstrated its potential as a new generation of multifunctional adsorbent, contributing to the recovery of rare/precious metals and the treatment of multi-polluted water.

Application of a magnetically separable Zr-MOF for fast extraction of palladium before its spectrophotometric detection

In this research, a novel magnetic zirconium-based metal-organic framework (Fe3O4@SiO2@MIP-202, MMOF), was fabricated, fully characterized, and applied for the batch-mode solid phase extraction of trace amounts of Pd2+ ions from water and wastewater samples before its spectrophotometric detection. Pd2+ ions were desorbed from MMOF by nitric acid and were complexed by treating with KI solution to have a maximum absorbance at 410 nm. The synthesized MMOF composite showed a very large surface area (65 m2.g- 1), good magnetization (1.7 emu.g- 1) and a large pore volume (0.059 cm3.g- 1) with adsorption capacity of 194.5 mg of Pd2+ ions/g of the adsorbent. This nanosorbent boasts chemo-mechanical stability, high adsorption capacity due to its vast active sites, and facile recovery facilitated by its magnetic properties. Parameters affecting the extraction efficiency of the method were optimized as pH of the sample 7.4, volume of the sample 25 mL, 15 mg adsorbent, 1 mL of 0.1 M HNO3 eluent, with 10 and 15 min as the extraction and desorption times, respectively. The calibration curve was found to be linear across the 10.0-1500.0 µg.L- 1 range with a limit of detection of 1.05 µg.L- 1. The obtained extraction efficiency and enrichment were 98% and 245, respectively. The total analysis time was less than 30 min. This MMOF has never been used for the extraction of Pd2+ ions before.

Mining wastewater treatment technologies and resource recovery techniques: A review

Mining wastewater can have adverse effects on the ecosystem; thus, treatment before discharging into the environment is of utmost importance. This manuscript reports on the effect of mining wastewater on the environment. Moreover, the currently used, effective and commercialised mine wastewater treatment technologies such as SAVMIN®, SPARRO®, Biogenic sulphide, and DESALX® are reported in this study. These technologies integrate two or more separation processes, which have been proven to be effective for the high recovery of salts and water for reuse. Some of the technologies reported can significantly recover salts and >95% of water. Modern pilot-stage and laboratory-scale treatment systems used for the recovery and removal of metals are also reported herein. Since some treatment technologies can generate highly toxic sludge and other waste products, the management of the generated waste was also considered. Some studies have focused on the treatment of wastewater at the laboratory level using the adsorption process. Most adsorbents exhibit promising results; however, there is insufficient research on reusability, toxic sludge management, and the economic analysis of the systems. Moreover, the implementation of adsorption systems in wastewater is necessary. Furthermore, the integration of treatment systems to recover precious metals at low concentrations is desirable in addition to water reclamation to achieve circular mine water.

Precise recognition and efficient recovery of Pd(II) from high-level liquid waste by a novel aminothiazole-functionalized silica-based adsorbent

Efficient recognition, separation and recovery of palladium from high-level liquid waste (HLLW) not only helps the safe, green and environmentally friendly disposal of nuclear waste, but also is an essential important supplement to overcome the growing shortage of natural palladium resources. Herein, a novel silica-based functional adsorbent named 2AT-SiAaC was prepared by a two-step method, i.e., grafting of 2-aminothiazole (2AT) via the amidated reaction after in-situ polymerization of acrylic monomers on porous silica. SEM, EDS, TG-DSC, BET and PXRD all proved the successful preparation of 2AT-SiAaC, and it exhibited ultrahigh adsorption selectivity for Pd(II) (Kd (distribution coefficient) ≥ 10,344.2 mL/g, SFPd/M (separation factor) ≥ 613.7), fast adsorption kinetics with short equilibrium time (t ≤ 1 h) and good adsorption capacity (Q ≥ 62.1 mg Pd/g). The dynamic column experiments shows that 2AT-SiAaC achieved efficiently separation of Pd(II) from simulated HLLW, and the enrichment coefficients (C/C0) of Pd(II) was as high as about 14 with the recovery rate nearly 99.9% and basically kept the same performance in three adsorption-desorption column cycle experiments. The adsorption mechanism was analyzed by FT-IR, XPS and DFT calculations, and the ultrahigh selectivity of 2AT-SiAaC was attributed to the preferred affinity of the soft N-donor atoms in 2AT for Pd(II). NO3- ions participated in the adsorption reaction to keep charge balance, and the frontier orbital electron density distribution diagram shows the charge transfer in the process of material preparation and adsorption. To sum up, 2AT-SiAaC adsorbent provided a new insight for precise recognition and efficient separation of Pd(II) from HLLW.

Adsorption of tetracycline from aqueous solution by ZIF-8: Isotherms, kinetics and thermodynamics

In this study, ZIF-8 nanoparticles were synthesized using a simple method at room temperature. The ZIF-8 nanoparticles were then characterized by scanning electron microscopy (SEM), transmission electron microscopy (TEM), BET (Brunauer-Emmett-Teller) specific surface area, X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FTIR), X-ray photoelectron spectroscopy (XPS), thermogravimetric analysis (TGA) and zeta potential. Subsequent batch adsorption experiments evaluated the adsorption performance of ZIF-8 on tetracycline, examining key pa-rameters like reaction time, pH, temperature, and adsorbent dosage. The results revealed a removal rate for TC of up to 90.59%. The adsorption data aligned with the Sips model, showcasing a maximum adsorption capacity of 359.61 mg/g at 303K. Further, the adsorption kinetics adhered to the pseudo-second-order kinetic model with an equilibrium adsorption capacity of 90 mg/g at 303K. The considerable specific surface area of ZIF-8, standing at 1674.169 m2/g, likely enhances the adsorption efficacy. Analysis using XRD and FTIR confirmed the adsorption of TC on the ma-terial's surface. Overall, the predominant driving forces behind the adsorption process were identified as electrostatic interactions and π-π stacking interactions.

Adsorption of Pd(II) ions by electrospun fibers with effective adsorption sites constructed by N, O atoms with a particular spatial configuration: Mechanism and practical applications

The separation and recovery of palladium from electronic waste (e-waste) are of great significance as they can alleviate environmental pollution and avoid resource loss. Herein, a novel nanofiber modified by 8-hydroxyquinoline (8-HQ-Nanofiber) with adsorption sites co-constructed by N and O atoms of hard bases was fabricated, which has good affinity properties for the Pd(II) ions belonging to soft acid in the leachate of e-waste. The adsorption mechanism of 8-HQ-Nanofiber for Pd(II) ions was revealed from the perspective of molecular level relied on a series of characterizations, such as FT-IR, ss-NMR, Zeta potential, XPS, BET, SEM and DFT. The adsorption of Pd(II) ions on 8-HQ-Nanofiber reached equilibrium within 30 min and the maximum uptake capacity was 281 mg/g at 318.15 K. The adsorption behavior of Pd(II) ions by 8-HQ-Nanofiber was described by the pseudo-second-order and Langmuir isotherm models. The 8-HQ-Nanofiber exhibited relatively good adsorption performance after 15 times of column adsorption. Finally, based on hard and soft acids and bases (HSAB) theory, a strategy to regulate the Lewis alkalinity of adsorption sites by specific spatial structures is proposed, which provides a new direction for the design of adsorption sites.

A novel S,N-rich MOF for efficient recovery of Au(III): Performance and mechanism

A novel S,N-rich MOF with adenine and 4,4'-thiodiphenol as organic ligands was synthesized via the one-step solvothermal method, and used for gold recovery. The pH impact, adsorption kinetics, isotherms, thermodynamics, selectivity, and reusability were investigated accordingly. The adsorption and desorption mechanism were also explored comprehensively. The electronic attraction, coordination, and in situ redox account for the Au(III) adsorption. The Au(III) adsorption is affected strongly by the pH of solutions, and best at pH of 2.57. The MOF exhibits exceptional adsorption capacity as high as 3680 mg/g at 55 °C, fast kinetics with 8 min for 9.6 mg/L Au(III), and excellent selectivity for gold ion in real e-waste leachates. The adsorption process of gold on the adsorbent is endothermic and spontaneous, and influenced visibly by temperature. The adsorption ratio still maintained 99% after seven adsorption-desorption cycles. The column adsorption experiments show that the MOF has outstanding selectivity for Au(III) with 100% of removal efficiency in a complex solution containing Au, Ni, Cu, Cd, Co, and Zn ions. A glorious adsorption with a breakthrough time of 532 mins was obtained for the breakthrough curve. This study not only provides an efficient adsorbent for gold recovery, but also guidance for designing new materials.

Design of Zr-MOFs by Introducing Multiple Ligands for Efficient and Selective Capturing of Pb(II) from Aqueous Solutions

The existence of lead ions seriously affects the quality of many metal products in metallurgical enterprises. Currently, the various methods of lead-ion removal tried by researchers will affect valuable metals in the removal process, thus resulting in low economic efficiency. In this study, a novel metal-organic framework adsorbent (UiO-FHD) which efficiently and selectively captures lead ions is developed by introducing multiple ligands. The maximum adsorption capacity of lead ions is 433.15 mg/g at pH 5. The adsorption process accords with the pseudo-second-order kinetic and the Langmuir isotherm models at room temperature. Thermodynamic experiments indicate that the removal of Pb(II) is facilitated by appropriate temperature reduction. The performance tests indicate that UiO-FHD maintains a high removal rate of 90.35% for Pb(II) after four consecutive adsorption-desorption cycles. The distribution coefficient of lead ions (26.7 L/g) shows that UiO-FHD has excellent selective adsorption for lead ions. It is revealed that the chelation of the sulfhydryl groups and the electrostatic interaction of the hydroxyl groups are the dominant factors to improve the removal rate of Pb(II) by density functional theory calculations. This study clarifies the value of self-designed novel organic ligands in metal-organic framework materials that selectively capture heavy-metal ions.

Sustainable and Selective Modern Methods of Noble Metal Recycling

Noble metals exhibit broad arrange of applications in industry and several aspects of human life which are becoming more and more prevalent in modern times. Due to their limited sources and constantly and consistently expanding demand, recycling of secondary and waste materials must accompany the traditional mineral extractions. This Minireview covers the most recent solvometallurgical developments in regeneration of Pd, Pt, Rh, Ru, Ir, Os, Ag and Au with emphasis on sustainability and selectivity. Processing-by selective oxidative dissolution, reductive precipitation, solvent extraction, co-precipitation, membrane transfer and trapping to solid media-of eligible multi-metal substrates for recycling from waste printed circuit boards to end-of-life automotive catalysts are discussed. Outlook for possible future direction for noble metal recycling is proposed with emphasis on sustainable approaches.

Anchored growth of highly dispersed LDHs nanosheets on expanded graphite for fluoride adsorption properties and mechanism

In this study, a new composite with layered double hydroxides (LDHs) anchored grown on expanded graphite (EG) interlayers was prepared by vacuum-assisted intercalation and hydrothermal method. Both sides of EG were completely covered by highly dispersed LDHs nanosheets and formed a sandwich-like structure. The unique structure made expanded graphite/layered double hydroxides (EG/LDHs) composites which had excellent F^- adsorption performance. The adsorption performance of F^- on EG/LDHs was evaluated, and the results indicated that the adsorption process was consistent with the pseudo-second-order kinetic model and the Langmuir model. Pseudo-second-order kinetic model indicated that the adsorption sites were the main factor in the adsorption process. Moreover, the maximum adsorption capacity (Q_m) reached 63.21 mg·g^-1 at 30 min at room temperature, which was better than most of the same type of adsorbents. The highly dispersed of LDHs anchored growth on EG overcame the disadvantage of aggregation, which exposed more adsorption sites and improved the removal efficiency of F^-. In addition, the effects of pH, anion interference, different water quality, and regeneration tests on the EG/LDHs composites were also analyzed, showing that the composites have good stability.

Bioinspired construction of magnetic nano stirring rods with radially aligned dual mesopores and intrinsic rapid adsorption of palladium

Quick and precise recovery of palladium (Pd) from electronic waste remains a serious task, owing to the strong acid and complexity of chemical compounds in leachate. Here, bioinspired construction of magnetic nano stirring rod with radially aligned dual mesopores and abundant 8-aminoquinoline (MNSR-DM-AQ) is proposed for selective and rapid extraction of Pd(II) from highly acidic sample solutions. Benefit from the unique dual mesoporous (12.4 nm and 3.6 nm) and the stirring motion under an external magnetic field, MNSR-DM-AQ possesses enhanced adsorption capacity and kinetics, achieving 11.62 mg g^-1 (97.2 % of the maximum adsorption capacity) in 15 min. Distribution coefficient (K_D = 299.0 mL g^-1), separation factor (α above 25.54) and concentration factor (CF = 230.2 mL g^-1) reveal the excellent selectivity of MNSR-DM-AQ towards Pd(II) when comparing with the coexisting ions (Ca(II), Co(II), Cu(II), Fe(II), Mg(II), Ni(II), Pb(II), Zn(II)). The adsorption mechanisms of MNSR-DM-AQ are ion exchange and chelation due to a strong affinity between Pd(II) and N. Meanwhile, 96.82 % of the captured Pd(II) can be easily eluted within 15 min, and the adsorption capacity remains stable after five adsorption-desorption cycles. It is worthwhile to mention that MNSR-DM-AQ exhibits a high adsorption capacity of 8.39 mg g^-1 from leachate of abandoned high-voltage patch capacitor, which is greatly desired in Pd(II) extraction from electronic waste.

Potential application of carbohydrate biomass in hydrometallurgy: one-pot reduction of metal oxides/salts under mild hydrothermal conditions

Carbohydrate biomass can be employed as a reductant for metallic material preparation due to it possessing diverse reducing functional groups. The reported studies focused on reduction of metal ions in acidic solution with the aid of biomass. However, we found alkali hydrothermal conditions are favorable to metal compound reduction, even direct conversion of metal oxides to metals. Based on our previous research on direct reduction of CuO and NiO into the corresponding metals, herein, conversion of other metal oxides (Fe₂O₃, MnO₂, Co₃O₄, PbO₂) with glucose was investigated to illustrate the universal applicability of direct reduction of metal oxides with carbohydrates under alkali hydrothermal conditions. Furthermore, metal salt reduction by carbohydrates was studied and the reduction performance of glucose and cellulose with and without alkali was compared. The results showed an alkaline hydrothermal environment is more conducive to metal reduction. Unlike the complete reduction of CuO and NiO, oxides of Fe(iii), Mn(iv), Co(iii) and Pb(iv) can only be partially reduced under the experimental conditions. Not only carbohydrates but also decomposed intermediates can reduce metal oxides or salts. In addition, due to the formation of stable complexes between the anions of salts and the decomposition products of carbohydrates, the reduction effects of various copper salts are significantly different. This study may provide an alternative approach to metal preparation in hydrometallurgy.

Carbohydrate biomass can be employed as a reductant for metallic material preparation due to it possessing diverse reducing functional groups.