Performance of free Candida antarctica lipase B in the enantioselective esterification of (R)-ketoprofen

Immobilized Lipase in Resolution of Ketoprofen Enantiomers: Examination of Biocatalysts Properties and Process Characterization

In this study, lipase from Aspergillus niger immobilized by physical immobilization by the adsorption interactions and partially interfacial activation and mixed physical immobilization via interfacial activation and ion exchange was used in the kinetic resolution of the ketoprofen racemic mixture. The FTIR spectra of samples after immobilization of enzyme-characteristic signals can be seen, and an increase in particle size diameters upon immobilization is observed, indicating efficient immobilization. The immobilization yield was on the level of 93% and 86% for immobilization unmodified and modified support, respectively, whereas activity recovery reached around 90% for both systems. The highest activity of immobilized biocatalysts was observed at pH 7 and temperature 40 °C and pH 8 and 20 °C for lipase immobilized by physical immobilization by the adsorption interactions and partially interfacial activation and mixed physical immobilization via interfacial activation and ion exchange, respectively. It was also shown that over a wide range of pH (from 7 to 10) and temperature (from 20 to 60 °C) both immobilized lipases retained over 80% of their relative activity, indicating improvement of enzyme stability. The best solvent during kinetic resolution of enantiomers was found to be phosphate buffer at pH 7, which obtained the highest efficiency of racemic ketoprofen methyl ester resolution at the level of over 51%, followed by enantiomeric excess 99.85% in the presence of biocatalyst obtained by physical immobilization by the adsorption interactions and partially interfacial activation.

Xylitol as a Hydrophilization Moiety for a Biocatalytically Synthesized Ibuprofen Prodrug

Biocatalyzed synthesis can be exploited to produce high-value products, such as prodrugs. The replacement of chemical approaches with biocatalytic processes is advantageous in terms of environmental prevention, embracing the principles of green chemistry. In this work, we propose the covalent attachment of xylitol to ibuprofen to produce an IBU-xylitol ester prodrug. Xylitol was chosen as a hydrophilizer for the final prodrug, enhancing the water solubility of ibuprofen. Ibuprofen is a nonsteroidal anti-inflammatory drug (NSAID) extensively used as an analgesic, anti-inflammatory, and antipyretic. Despite being the third-most-prescribed medicine in the world, the aqueous solubility of ibuprofen is just 21 mg/L. This poor water solubility greatly limits the bioavailability of ibuprofen. We aimed to functionalize ibuprofen with xylitol using the reusable immobilized N435 biocatalyst. Instead of a biphasic media, we proposed a monophasic reaction environment. The characterization of the IBU-xylitol ester was performed by ¹H, ¹³C-NMR, DEPT, COSY, HMQC, HMBC, FTIR, and MS spectroscopy. Preliminary in vitro tests showed that this enzymatically synthesized prodrug of ibuprofen reduced the expression of the interleukin 8 genes in human bronchial epithelial cells (IB3-1) from cystic fibrosis (CF) patients.

Glyceric Prodrug of Ursodeoxycholic Acid (UDCA): Novozym 435-Catalyzed Synthesis of UDCA-Monoglyceride

Bile acids (BAs) are a family of steroids synthesized from cholesterol in the liver. Among bile acids, ursodeoxycholic acid (UDCA) is the drug of choice for treating primary biliary cirrhosis and dissolving cholesterol gallstones. The clinical effectiveness of UDCA includes its choleretic activity, the capability to inhibit hydrophobic bile acid absorption by the intestine under cholestatic conditions, reducing cholangiocyte injury, stimulation of impaired biliary output, and inhibition of hepatocyte apoptosis. Despite its clinical effectiveness, UDCA is poorly soluble in the gastro-duodeno-jejunal contents, and pharmacological doses of UDCA are not readily soluble in the stomach and intestine, resulting in incomplete absorption. Indeed, the solubility of 20 mg/L greatly limits the bioavailability of UDCA. Since the bioavailability of drug products plays a critical role in the design of oral administration dosages, we investigated the enzymatic esterification of UDCA as a strategy of hydrophilization. Therefore, we decided to enzymatically synthesize a glyceric ester of UDCA bile acid to produce a more water-soluble molecule. The esterification reactions between UDCA and glycerol were performed with an immobilized lipase B from Candida antarctica (Novozym 435) in solvent-free and solvent-assisted systems. The characterization of the UDCA-monoglyceride, enzymatically synthesized, has been performed by ¹H-NMR, ¹³C-NMR, COSY, HSQC, HMBC, IR, and MS spectroscopy.

Lipase Assisted (S)-Ketoprofen Resolution from Commercially Available Racemic Mixture

Ketoprofen is a commercially available drug sold as a racemic mixture that belongs to the family of non-steroidal anti-inflammatory drugs known as profens. It has been demonstrated (in vitro) that (S)-ketoprofen is around 160 times more potent than its enantiomer (R)-ketoprofen, while accumulation of (R)-ketoprofen can cause serious side effects, such as dyspepsia, gastrointestinal ulceration/bleeding, pain, salt and fluid retention, and hypertension. In this work, four commercially available lipases were systematically assessed. Parameters such as conversion, enantiomeric excess, and enantioselectivity were considered. Among them, and by evaluating lipase load, temperature, solvent, and alcohol, Candida rugosa lipase exhibited the best results in terms of enantioselectivity E = 185 ((S)-enantiopreference) with esterification conversions of c = 47% (out of 50%) and enantiomeric excess of 99%. The unreacted (R)-enantiomer was recovered by liquid-liquid extraction and racemized under basic media, which was recycled as starting material. Finally, the (S)-alkyl ketoprofen ester was successfully enzymatically hydrolyzed to the desired (S)-ketoprofen with c = 98.5% and 99% ee. This work demonstrated the benefit and efficiency of using Candida rugosa lipase to kinetically resolve racemic ketoprofen by an environmentally friendly protocol and with the recycling of the undesired (R)-ketoprofen.

Biocatalytic Approach for Direct Esterification of Ibuprofen with Sorbitol in Biphasic Media

Ibuprofen is a nonsteroidal anti-inflammatory drug (NSAID) introduced in the 1960s and widely used as an analgesic, anti-inflammatory, and antipyretic. In its acid form, the solubility of 21 mg/L greatly limits its bioavailability. Since the bioavailability of a drug product plays a critical role in the design of oral administration dosage, this study investigated the enzymatic esterification of ibuprofen as a strategy for hydrophilization. This work proposes an enzymatic strategy for the covalent attack of highly hydrophilic molecules using acidic functions of commercially available bioactive compounds. The poorly water-soluble drug ibuprofen was esterified in a hexane/water biphasic system by direct esterification with sorbitol using the cheap biocatalyst porcine pancreas lipase (PPL), which demonstrated itself to be a suitable enzyme for the effective production of the IBU-sorbitol ester. This work reports the optimization of the esterification reaction.

Enzymatic Esterification as Potential Strategy to Enhance the Sorbic Acid Behavior as Food and Beverage Preservative

Sorbic acid is the most commonly used preservative in the food industry. The antimicrobial inhibition of sorbic acid could be influenced by its lipophilic nature, which reduces its use in hydrophilic food formulations. Reactions between sorbic acid and glycerol catalyzed by lipases were studied in order to develop a novel sorbic acid derivate with a promising hydrophilic profile. The esterification reaction between sorbic acid and glycerol in a solvent-free system were performed with an immobilized lipase B from Candida antarctica (CALB). The glycerol sorbate product has been tested against S. griseus bacterium and Saccharomyces cerevisiae yeast. Results indicate that the esterification of sorbic acid with glycerol does improve its antimicrobial properties against Saccharomyces cerevisie. The reported results demonstrate that esterification can be used as a strategy to improve the antimicrobial activity of sorbic acid.

Synthesis of Ibuprofen Monoglyceride in Solventless Medium with Novozym®435: Kinetic Analysis

This study investigates the enzymatic esterification of glycerol and ibuprofen in a solventless medium catalyzed by immobilized lipase B from Candida antarctica (Novozym®435). Fixing the concentration of this enzymatic solid preparation at 30 g·L−1, and operating at a constant stirring speed of 720 rpm, the temperature was changed between 50 and 80 °C, while the initial concentration of ibuprofen was studied from 20 to 100 g·L−1. Under these conditions, the resistance of external mass transport can be neglected, as confirmed by the Mears criterion (Me < 0.15). However, the mass transfer limitation inside the pores of the support has been evidenced. The values of the effectiveness factor (η) vary between 0.08 and 0.16 for the particle size range considered according to the Weisz–Prater criteria. Preliminary runs permit us to conclude that the enzyme was deactivated at medium to high temperatures and initial concentration values of ibuprofen. Several phenomenological kinetic models were proposed and fitted to all data available, using physical and statistical criteria to select the most adequate model. The best kinetic model was a reversible sigmoidal model with pseudo-first order with respect to dissolved ibuprofen and order 2 with respect to monoester ibuprofen, assuming the total first-order one-step deactivation of the enzyme, with partial first order for ibuprofen and enzyme activity.

Directly covalent immobilization of Candida antarctica lipase B on oxidized aspen powder by introducing poly‑lysines: An economical approach to improve enzyme performance

In our previous study, we could achieve high soluble expression of Candida antarctica lipase B (CalB) in E. coli by fusion poly‑amino acid tags on CalB (pCalB). Herein, we are surprised to find that pCalB can be easily and directly covalent binding on a simply oxidized aspen powder (OAP) by the aid of poly‑lysine tags. Under the optimal conditions, 72.9 ± 3.6% of the total protein could be immobilized, and the activity recovery of immobilized pCalB (pCalB-OAP) was 98.9 ± 3.8%. The analysis of scanning electron microscopy (SEM) and Fourier transform infrared spectroscopy (FTIR) indicated that OAP was a suitable carrier for enzyme immobilization. The immobilized pCalB-OAP could exhibit excellent thermal stabilities, and it retained a residual activity of 58.4 ± 2.8% at 55 °C, whereas only 21.2 ± 2.2% of its initial activity for free pCalB was observed. And it could also display a nice tolerance for the changes of pH environment, compared with that of free pCalB. The results that pCalB-OAP could retained 73.6 ± 2.9% of their initial activity in (R, S)-NEMPAME hydrolysis after the tenth cycles, suggested that pCalB-OAP could be effectively recycled. The immobilization strategies established here were simple and inexpensive.

In Silico insights on enhancing thermostability and activity of a plant Fructosyltransferase from Pachysandra terminalis via introduction of disulfide bridges

Drawbacks of industrially-used fructosyltransferases (FTs) such as low optimum temperature and low fructooligosaccharides (FOS) yield necessitates the search for engineered FTs that are highly thermostable and active. With the availability of the first plant FT crystal structure from Pachysandra terminalis (PDB ID: 3UGH), computer-aided protein engineering of plant FT is now feasible. To obtain insights on the effect of specific mutations i.e. disulfide bridge introduction, wild-type and mutant FTs were subjected to a 15 μs Martini Coarse-grained Molecular Dynamics (CGMD) simulations at 303 K and 334 K. We report here the five mutants, M31C-Q49C, L144C-S193C, P34C-W300C, S219C-L226C and V470C-S498C with enhanced thermostabilities and/or activities relative to the wild type. Interestingly, M31C-Q49C, which is located within the catalytic-carrying blade of the catalytic domain, has an activity enhancement at both temperatures. At 334 K, three mutations, L144C-S193C, P34C-W300C and V470C-S498C, achieved thermostability relative to the wild type. Intriguingly, both activity and stability enhancement exhibited only at 334 K can be achieved provided that the mutation is located either on the catalytic-carrying residue blade of the catalytic domain or on the non-catalytic domain. Our results suggest that V470C-S498C and L144C-S193C are promising mutants and that domain-specific approach may be exploited to customize enzyme properties.

Overcoming Water Insolubility in Flow: Enantioselective Hydrolysis of Naproxen Ester

Hydrolytic enantioselective cleavage of different racemic non-steroidal anti-inflammatory drugs (NSAIDs) ester derivatives has been studied. An engineered esterase form Bacillus subtilis (BS2m) significantly outperformed homologous enzymes from Halomonas elongata (HeE) and Bacillus coagulants (BCE) in the enantioselective hydrolysis of naproxen esters. Structural analysis of the three active sites highlighted key differences which explained the substrate preference. Immobilization of a chimeric BS2m-T4 lysozyme fusion (BS2mT4L1) was improved by resin screening achieving twice the recovered activity (22.1 ± 5 U/g) with respect to what had been previously reported, and was utilized in a packed bed reactor. Continuous hydrolysis of α-methyl benzene acetic acid butyl ester as a model substrate was easily achieved, albeit at low concentration (1 mM). However, the high degree of insolubility of the naproxen butyl ester resulted in a slurry which could not be efficiently bioconverted, despite the addition of co-solvents and lower substrate concentration (1 mM). Addition of Triton® X-100 to the substrate mix yielded 24% molar conversion and 80% e.e. at a 5 mM scale with 5 min residence time and sufficient retention of catalytic efficiency after 6 h of use.

Relevance and bio-catalytic strategies for the kinetic resolution of ketoprofen towards dexketoprofen

This review presents the most relevant investigations concerning the biocatalytic kinetic resolution of racemic ketoprofen to dexketoprofen for the last 22 years. The advantages related to the administration of the dex-enantiomer in terms of human health, the so called "chiral switch" in the pharmaceutical industry and the sustainability of biotransformations have been the driving forces to develop innovative technology to obtain dexketoprofen. In particular, the kinetic resolution of racemic ketoprofen through enantiomeric esterification and hydrolysis using lipases as biocatalysts are thoroughly revised and commented upon. In this context, the biocatalysts, acyl-acceptors (alcohols), reaction conditions, conversion, enantiomeric excess, and enantiomeric ratio among others are discussed. Moreover, the investigations concerning scaling up processes in order to obtain an optically pure enantiomer of the profen are presented. Finally, some guidelines about perspectives of the technology and research opportunities are given.

Sugar ester surfactants: enzymatic synthesis and applications in food industry

Sugar esters are non-ionic surfactants that can be synthesized in a single enzymatic reaction step using lipases. The stability and efficiency of lipases under unusual conditions and using non-conventional media can be significantly improved through immobilization and protein engineering. Also, the development of de novo enzymes has seen a significant increase lately under the scope of the new field of synthetic biology. Depending on the esterification degree and the nature of fatty acid and/or sugar, a range of sugar esters can be synthesized. Due to their surface activity and emulsifying capacity, sugar esters are promising for applications in food industry.

Enantio-conversion and -selectivity of racemic atenolol kinetic resolution using free Pseudomonas fluorescens lipase (Amano) conducted via transesterification reaction

Effects of reaction parameters on kinetic resolution of racemic atenolol usingPseudomonas fluorescenslipase were investigatedviatransesterification for production of pharmacologically active eutomer (S)-atenolol with high enantiomeric purity.

Enzymatic synthesis of ibuprofen monoglycerides catalyzed by free Candida antarctica lipase B in a toluene–glycerol biphasic medium

Reactive distillation in the presence of toluene permits the intensification of ibuprofen monoglyceride synthesis by means of aCandida antarcticaindustrial solution, attaining total conversion.

Combination of oxyanion Gln114 mutation and medium engineering to influence the enantioselectivity of thermophilic lipase from Geobacillus zalihae

The substitution of the oxyanion Q114 with Met and Leu was carried out to investigate the role of Q114 in imparting enantioselectivity on T1 lipase. The mutation improved enantioselectivity in Q114M over the wild-type, while enantioselectivity in Q114L was reduced. The enantioselectivity of the thermophilic lipases, T1, Q114L and Q114M correlated better with log p as compared to the dielectric constant and dipole moment of the solvents. Enzyme activity was good in solvents with log p < 3.5, with the exception of hexane which deviated substantially. Isooctane was found to be the best solvent for the esterification of (R,S)-ibuprofen with oleyl alcohol for lipases Q114M and Q114L, to afford E values of 53.7 and 12.2, respectively. Selectivity of T1 was highest in tetradecane with E value 49.2. Solvents with low log p reduced overall lipase activity and dimethyl sulfoxide (DMSO) completely inhibited the lipases. Ester conversions, however, were still low. Molecular sieves employed as desiccant were found to adversely affect catalysis in the lipase variants, particularly in Q114M. The higher desiccant loading also increased viscosity in the reaction and further reduced the efficiency of the lipase-catalyzed esterifications.

Immobilization of Candida rugosa lipase on hydrophobic/strong cation-exchange functional silica particles for biocatalytic synthesis of phytosterol esters

In this work, mixed-mode silica particles functionalized with octyl and sulfonic acid groups was conveniently prepared by co-bonding a mixture of n-octyltriethoxysilane and 3-mercaptopropyltriethoxysilane and then oxidized with hydrogen peroxide. Candida rugosa lipase (CRL) was immobilized on the mixed-mode silica particles via hydrophobic and strong cation-exchange interaction. The resulting immobilized CRL increased remarkably its stability at high temperature in comparison to free CRL. The immobilized CRL was used as biocatalysts for enzymatic esterification of phytosterols with free fatty acids (FFAs) to produce phytosterol esters. The phytosterols linolenate esterification degree of 95.3% was obtained under the optimized condition. Phytosterols esters could also been converted in high yields to the corresponding long-chain acyl esters via transesterification with methyl esters of fatty acids (80.5%) or triacylglycerols (above 95.5%) using mixed-mode silica particles immobilized CRL as biocatalyst. Furthermore, the immobilized CRL by absorption retained 78.6% of their initial activity after 7 recycles.

Cold active microbial lipases: some hot issues and recent developments

Lipases are glycerol ester hydrolases that catalyze the hydrolysis of triglycerides to free fatty acids and glycerol. Lipases catalyze esterification, interesterification, acidolysis, alcoholysis and aminolysis in addition to the hydrolytic activity on triglycerides. The temperature stability of lipases has regarded as the most important characteristic for use in industry. Psychrophilic lipases have lately attracted attention because of their increasing use in the organic synthesis of chiral intermediates due to their low optimum temperature and high activity at very low temperatures, which are favorable properties for the production of relatively frail compounds. In addition, these enzymes have an advantage under low water conditions due to their inherent greater flexibility, wherein the activity of mesophilic and thermophilic enzymes are severely impaired by an excess of rigidity. Cold-adapted microorganisms are potential source of cold-active lipases and they have been isolated from cold regions and studied. Compared to other lipases, relatively smaller numbers of cold active bacterial lipases were well studied. Lipases isolated from different sources have a wide range of properties depending on their sources with respect to positional specificity, fatty acid specificity, thermostability, pH optimum, etc. Use of industrial enzymes allows the technologist to develop processes that closely approach the gentle, efficient processes in nature. Some of these processes using cold active lipase from C. antarctica have been patented by pharmaceutical, chemical and food industries. Cold active lipases cover a broad spectrum of biotechnological applications like additives in detergents, additives in food industries, environmental bioremediations, biotransformation, molecular biology applications and heterologous gene expression in psychrophilic hosts to prevent formation of inclusion bodies. Cold active enzymes from psychrotrophic microorganisms showing high catalytic activity at low temperatures can be highly expressed in such recombinant strains. Thus, cold active lipases are today the enzymes of choice for organic chemists, pharmacists, biophysicists, biochemical and process engineers, biotechnologists, microbiologists and biochemists.