Microbial bioelectrosynthesis of hydrogen: Current challenges and scale-up

Towards rapid formation of electroactive biofilm: insights from thermodynamics and electric field manipulation

Electroactive biofilm (EAB) has garnered significant attention due to its effectiveness in pollutant remediation, electricity generation, and chemical synthesis. However, achieving precise control over the rapid formation of EAB presents challenges for the practical implementation of bioelectrochemical technology. In this study, we investigated the regulation of EAB formation by manipulating applied electric potential. We developed a modified XDLVO model for the applied electric field and quantitatively assessed the feasibility of existing rapid formation strategies for EAB. Our results revealed that electrostatic (EL) force significantly influenced EAB formation in the presence of the applied electric field, with the potential difference between the electrode and the microbial solution being the primary determinant of EL force. Compared to -0.2 V and 0 V vs.Ag/AgCl, EAB exhibited the highest electrochemical performance at 0.2 V vs.Ag/AgCl, with a maximum current density of 6.044 ± 0.10 A/m2, surpassing that at -0.2 V vs.Ag/AgCl and 0 V vs.Ag/AgCl by 1.73 times and 1.31 times, respectively. Furthermore, EAB demonstrated the highest biomass accumulation, measuring a thickness of 25 ± 2 μm at 0.2 V vs. Ag/AgCl, representing increases of 1.67 and 1.25 times compared to -0.2 V vs.Ag/AgCl and 0 V vs.Ag/AgCl, respectively. The strong electrostatic attraction under the anodic potential promoted the formation of a monolayer of biofilm. Additionally, the hydrophilicity and hydrophobicity of the biofilm were altered following inversion culture. The Lewis acid-base (AB) attraction offset the electrostatic repulsion caused by negative charges, it is beneficial for the formation of biofilms. This study, for the first time, elucidated the difference in the formation of cathode and anode biofilm from a thermodynamic perspective in the context of electric field introduction, laying the theoretical foundation for the directional regulation of the rapid formation of typical electroactive biofilms.

Comparative environmental sustainability assessment of biohydrogen production methods

As energy crisis is recognized as an increasingly serious concern, the topic on biohydrogen (bioH2) production, which is renewable and eco-friendly, appears to be a highly-demanding subject. Although bioH2 production technologies are still at the developmental stage, there are many reported works available on lab- and pilot-scale systems with a promising future. This paper presents various potential methods of bioH2 production using biomass resources and comparatively assesses them for environmental impacts with a special emphasis on the specific biological processes. The environmental impact factors are then normalized with the feature scaling and normalization methods to evaluate the environmental sustainability dimensions of each bioH2 production method. The results reveals that the photofermentation (PF) process is more environmentally sustainable than the other investigated biological and thermochemical processes, in terms of emissions, water-fossil-mineral uses, and health issues. The global warming potential (GWP) and acidification potential (AP) for the PF process are then found to be 1.88 kg-CO2 eq. and 3.61 g-SO2 eq., which become the lowest among all processes, including renewable energy-based H2 production processes. However, the dark fermentation-microbial electrolysis cell (DF-MEC) hybrid process is considered the most environmentally harmful technique, with the highest GWP value of 14.6 kg-CO2 eq. due to their superior electricity and heat requirements. The water conception potential (WCP) of 84.5 m3 and water scarcity footprint (WSF) of 3632.9 m3 for the DF-MEC process is also the highest compared to all other processes due to the huge amount of wastewater formation potential of the system. Finally, the overall rankings confirm that biological processes are primarily promising candidates to produce bioH2 from an environmentally friendly point of view.

Construction of an Acetate Metabolic Pathway to Enhance Electron Generation of Engineered Shewanella oneidensis

Background: Microbial fuel cells (MFCs) are a novel bioelectrochemical devices that can use exoelectrogens as biocatalyst to convert various organic wastes into electricity. Among them, acetate, a major component of industrial biological wastewater and by-product of lignocellulose degradation, could release eight electrons per mole when completely degraded into CO₂ and H₂O, which has been identified as a promising carbon source and electron donor. However, Shewanella oneidensis MR-1, a famous facultative anaerobic exoelectrogens, only preferentially uses lactate as carbon source and electron donor and could hardly metabolize acetate in MFCs, which greatly limited Coulombic efficiency of MFCs and the capacity of bio-catalysis. Results: Here, to enable acetate as the sole carbon source and electron donor for electricity production in S. oneidensis, we successfully constructed three engineered S. oneidensis (named AceU1, AceU2, and AceU3) by assembling the succinyl-CoA:acetate CoA-transferase (SCACT) metabolism pathways, including acetate coenzyme A transferase encoded by ato1 and ato2 gene from G. sulfurreducens and citrate synthase encoded by the gltA gene from S. oneidensis, which could successfully utilize acetate as carbon source under anaerobic and aerobic conditions. Then, biochemical characterizations showed the engineered strain AceU3 generated a maximum power density of 8.3 ± 1.2 mW/m² with acetate as the sole electron donor in MFCs. In addition, when further using lactate as the electron donor, the maximum power density obtained by AceU3 was 51.1 ± 3.1 mW/m², which approximately 2.4-fold higher than that of wild type (WT). Besides, the Coulombic efficiency of AceU3 strain could reach 12.4% increased by 2.0-fold compared that of WT, which demonstrated that the engineered strain AceU3 can further utilize acetate as an electron donor to continuously generate electricity. Conclusion: In the present study, we first rationally designed S. oneidensis for enhancing the electron generation by using acetate as sole carbon source and electron donor. Based on synthetic biology strategies, modular assembly of acetate metabolic pathways could be further extended to other exoelectrogens to improve the Coulombic efficiency and broaden the spectrum of available carbon sources in MFCs for bioelectricity production.

Recent Developments in Microbial Electrolysis Cell-Based Biohydrogen Production Utilizing Wastewater as a Feedstock

Carbon constraints, as well as the growing hazard of greenhouse gas emissions, have accelerated research into all possible renewable energy and fuel sources. Microbial electrolysis cells (MECs), a novel technology able to convert soluble organic matter into energy such as hydrogen gas, represent the most recent breakthrough. While research into energy recovery from wastewater using microbial electrolysis cells is fascinating and a carbon-neutral technology that is still mostly limited to lab-scale applications, much more work on improving the function of microbial electrolysis cells would be required to expand their use in many of these applications. The present limiting issues for effective scaling up of the manufacturing process include the high manufacturing costs of microbial electrolysis cells, their high internal resistance and methanogenesis, and membrane/cathode biofouling. This paper examines the evolution of microbial electrolysis cell technology in terms of hydrogen yield, operational aspects that impact total hydrogen output in optimization studies, and important information on the efficiency of the processes. Moreover, life-cycle assessment of MEC technology in comparison to other technologies has been discussed. According to the results, MEC is at technology readiness level (TRL) 5, which means that it is ready for industrial development, and, according to the techno-economics, it may be commercialized soon due to its carbon-neutral qualities.

Scaling-up up-flow microbial electrolysis cells with a compact electrode configuration for continuous hydrogen production

Maintaining high current densities is a key challenge in scaling-up microbial electrolysis cell (MEC) reactors. In this study, a novel 10 L MEC reactor with a total electrode surface area greater than 1 m² was designed and evaluated to maximize the current density and H₂ recovery. Performances of the reactor suggest that the longitudinal structure with parallel vertical orientation of the electrodes encouraged high fluid mixing and the sheet metal electrode frames provided distributed electrical connection. Results also demonstrated that the electrode pairs located next to reactor walls decreased current density, as did separating the electrodes with separators. High volumetric H₂ production rate of 5.9 L/L/d was achieved at a volumetric current density of 970 A/m³ (34 A/m²). Moreover, the observed current densities of the large reactor were accurately predicted based on the internal resistance analysis of small scale MECs (0.15 L), demonstrating the scalability of the single chamber MEC design.

Electro-fermentation for biofuels and biochemicals production: Current status and future directions

Electro-fermentation is an emerging bioporcess that could regulate the metabolism of electrochemically active microorganisms. The provision of electrodes for the fermentation process that functions as an electron acceptor and supports the formation and transportation of electrons and protons, consequently producing bioelectricity and value-added chemicals. The traditional method of fermentation has several limitations in usability and economic feasibility. Subsequently, a series of metabolic processes occurring in conventional fermentation processes are most often redox misaligned. In this regard, electro-fermentation emerged as a hybrid technology which can regulate a series of metabolic processes occurring in a bioreactor by regulating the redox instabilities and boosting the overall metabolic process towards high biomass yield and enhanced product formation. The present article deals with microorganisms-electrode interactions, various types of electro-fermentation systems, comparative evaluation of pure and mixed culture electro-fermentation application, and value-added fuels and chemical synthesis.

Microbial Electrolysis Cells for Decentralised Wastewater Treatment: The Next Steps

Traditional wastewater treatment methods have become aged and inefficient, meaning alternative methods are essential to protect the environment and ensure water and energy security worldwide. The use of microbial electrolysis cells (MEC) for wastewater treatment provides an innovative alternative, working towards circular wastewater treatment for energy production. This study evaluates the factors hindering industrial adoption of this technology and proposes the next steps for further research and development. Existing pilot-scale investigations are studied to critically assess the main limitations, focusing on the electrode material, feedstock, system design and inoculation and what steps need to be taken for industrial adoption of the technology. It was found that high strength influents lead to an increase in energy production, improving economic viability; however, large variations in waste streams indicated that a homogenous solution to wastewater treatment is unlikely with changes to the MEC system specific to different waste streams. The current capital cost of implementing MECs is high and reducing the cost of the electrodes should be a priority. Previous pilot-scale studies have predominantly used carbon-based materials. Significant reductions in relative performance are observed when electrodes increase in size. Inoculation time was found to be a significant barrier to quick operational performance. Economic analysis of the technology indicated that MECs offer an attractive option for wastewater treatment, namely greater energy production and improved treatment efficiency. However, a significant reduction in capital cost is necessary to make this economically viable. MEC based systems should offer improvements in system reliability, reduced downtime, improved treatment rates and improved energy return. Discussion of the merits of H2 or CH4 production indicates that an initial focus on methane production could provide a stepping-stone in the adoption of this technology while the hydrogen market matures.

Influence of Nickel molybdate nanocatalyst for enhancing biohydrogen production in microbial electrolysis cell utilizing sugar industrial effluent

Biohydrogen production in Microbial Electrolysis Cell (MEC) had inspired the researchers to overcome the challenges associated towards sustainability. Despite microbial community and various substrates, economical cathode catalyst development is most significant factor for enhancing hydrogen production in the MEC. Hence, in this study, the performance of MEC was investigated with a sugar industry effluent (COD 4200 ± 20 mg/L) with graphite anode and modified Nickel foam (NF) cathode. Nickel molybdate (NiMoO₄) coated NF achieved a higher hydrogen production rate 0.12 ± 0.01 L.L^-1D^-1 as compared to control under favorable conditions. Electrochemical characterizations demonstrated that the improved catalytic activity of novel nanocatalyst with lower impedance favoring faster hydrogen evolution kinetics. The MEC with the novel catalyst performed with 58.2% coloumbic efficiency, 20.36% cathodic hydrogen recovery, 11.96% overall hydrogen recovery and 54.38% COD removal efficiency for a 250 mL substrate during 5 days' batch cycle. Hence, the potentiality of modified cathode was established with the real time industrial effluent highlighting the waste to wealth bio-electrochemical technology.

A review and perspective of recent research in biological treatment applied in removal of chlorinated volatile organic compounds from waste air

Chlorinated volatile organic compounds (Cl-VOCs) waste air is a kind of typical recalcitrant organic compounds, which poses a great threat to the ecological environment and human health. At present, the biotechnology is considered as a potential strategy for the Cl-VOCs removal due to the advantages of low energy consumption and less possibility of secondary pollution. This work summarizes the recent researches on strains, bioreactors and technology integration. The dominant pure strains for biodegradation of Cl-VOCs are first outlined with a special focus on the co-metabolism of multi-components. It then summarizes two bioreactors (optimized airlift reactor (ALR) and two-phase partitioning bioreactor (TPPB)) and strategy (addition of surfactant) for improvement of biotrickling filter (BTF), which are benefit to achieve the mass transfer enhancement in the removal of hydrophobic Cl-VOCs from waste air. After that, the integration technologies, such as magnetic field (MF)-BTF, non-thermal plasma (NTP)/ultraviolet light (UV)-BTF, and microbial electrolytic cells (MEC), are elucidated, which provide opportunities for complete mineralization of Cl-VOCs in a more efficient, energy-saving and economical way. Finally, current challenges and a perspective of future research on biotechnology for Cl-VOCs removal are thoroughly discussed.

Bioelectrochemical approach for enhancing lignocellulose degradation and biofilm formation in Geobacillus strain WSUCF1

Investigations on microbial electrocatalysis as a strategy for enhancing the rates of substrate utilization leading to enhanced yield of biomass and enhanced biofilm formation are reported. A thermophilic Geobacillus sp. strain WSUCF1 (60 °C), a potential lignocellulose degrading microorganism was used as the electrocatalyst. Glucose, cellulose, and corn stover were used as the feedstocks. The results of this investigation showed that applying the oxidation potential of -0.383 mV (vs PRE) increased the glucose utilization and COD removal by 25.5% and 29.7% respectively. The bioelectrocatalysis strategy also increased the biomass yield by 81.2, 42.1, and 49.5% in the case of systems fed with glucose, cellulose, and corn stover, respectively, when compared with the systems without applied oxidation potential. This is the first work reporting the effects of applied oxidation potential on increasing the rates of degradation of lignocellulosic biomass and enhanced biofilm formation.

Enzyme-electrolytic degradation of dichloromethane: Efficiency, kinetics and mechanism

Enzymatic electrolysis cell (EEC) has advantages over microbial electrolysis cell (MEC) due to the needless of microbe inoculation and high-efficiency of enzymatic reaction. In this study, an EEC was first applied to achieve the effective degradation of halogenated organic pollutants and dichloromethane (CH₂Cl₂) was utilized as a model pollutant. The results indicate that the degradation efficiency of CH₂Cl₂ after 2 hr reaction in the EEC was almost 100%, which was significantly higher than that with enzyme (51.1%) or current (19.0%). The current induced the continuous regeneration of reduced glutathione (GSH), thus CH₂Cl₂ was degraded under the catalysis of GSH-dependent dehalogenase through stepwise dechlorination, and successively formed monochloromethane (CH₃Cl) and methane (CH₄). The kinetic result shows that with a current of 15 mA, the maximum specific degradation rate of CH₂Cl₂ (3.77 × 10^-3hr^-1) was increased by 5.7 times. The optimum condition for CH₂Cl₂ dechlorination was also obtained with pH, current and temperature of 7.0, 15 mA and 35°C, respectively. Importantly, this study helps to understand the behavior of enzymes and the fate of halogenated organic pollutants with EEC, providing a possible treatment technology for halogenated organic pollutants.

Electrochemical biotechnologies minimizing the required electrode assemblies

Microbial electrochemical systems (MESs) are expected to be put into practical use as an environmental technology that can support a future environmentally friendly society. However, conventional MESs present a challenge of inevitably increasing initial investment, mainly due to requirements for a large numbers of electrode assemblies. In this review, we introduce electrochemical biotechnologies that are under development and can minimize the required electrode assemblies. The novel biotechnologies, called electro-fermentation and indirect electro-stimulation, can drive specific microbial metabolism by electrochemically controlling intercellular and extracellular redox states, respectively. Other technologies, namely electric syntrophy and microbial photo-electrosynthesis, obviate the need for electrode assemblies, instead stimulating targeted reactions by using conductive particles to create new metabolic electron flows.

A review on bio-electrochemical systems (BESs) for the syngas and value added biochemicals production

Bio-electrochemical systems (BESs) are the microbial systems which are employed to produce electricity directly from organic wastes along with some valuable chemicals production such as medium chain fatty acids; acetate, butyrate and alcohols. In this review, recent updates about value-added chemicals production concomitantly with the production of gaseous fuels like hydrogen and methane which are considered as cleaner for the environment have been addressed. Additionally, the bottlenecks associated with the conversion rates, lower yields and other aspects have been mentioned. In spite of its infant stage development, this would be the future trend of energy, biochemicals and electricity production in greener and cleaner pathway with the win-win situation of organic waste remediation. Henceforth, this review intends to summarise and foster the progress made in the BESs and discusses its challenges and outlook on future research advances.

Microbiome involved in microbial electrochemical systems (MESs): A review

Microbial electrochemical systems (MESs) are an attracting technology for the disposal of wastewater treatment and simultaneous energy production. In MESs, at the anode microorganisms through the catalytic activity generates electrons that can be converted into electricity or other valuable chemical compounds. Microorganisms those having ability to donate and accept electrons to and from anode and cathode electrodes, respectively are recognized as 'exoelectrogens'. In the MESs, it renders an important function for its performance. In the present mini-review, we have discussed the role of microbiome including pure culture, enriched culture and mixed culture in different BESs application. The effects of operational and biological factors on microbiome development have been discussed. Further discussion about the molecular techniques for the evaluation of microbial community analysis is addressed. In addition different electrochemical techniques for extracellular electron transfer (EET) mechanism of electroactive biofilms have been discussed. This review highlights the importance of microbiome in the development of MESs, effective operational factors for exo-electrogens activities as well their key challenges and future technological aspects are also briefly discussed.