Synthesis and characterization of environmentally-friendly waterborne poly(urethane-urea)s

Thermally Treated Berberine-Loaded SA/PVA/PEO Electrospun Microfiber Membranes for Antibacterial Wound Dressings

This study aimed to develop a safe and advanced antibacterial material of electrospun microfiber membranes (MFMs) for wound dressings. Combinations of several materials were investigated; thermal treatment and electrospinning techniques were used to form the best quality of MFMs to suit its end applications. By comparing the fiber morphology, diameter changes, and fracture strength, the suitable ratio of raw materials and thermal treatment were obtained before and after adding Trition X-100 as a surfactant for MFMs of sodium alginate/polyvinyl alcohol/polyethylene oxide (SA/PVA/PEO). The electrospinning solution was mixed with berberine as an antibacterial substance; meanwhile, calcium chloride (CaCl₂) was used as the crosslinking agent. The antibacterial properties, water dissolution resistance, water content, and fracture strength were thoroughly investigated. The results showed that the antibacterial rates of MFMs with different mass fractions of berberine (0, 3, and 5 wt.%) to Escherichia coli (E. coli) were 14.7, 92.9, and 97.2%, respectively. The moisture content and fracture strength of MFMs containing 5 wt.% berberine were 72.0% and 7.8 MPa, respectively. In addition, the produced MFMs embodied great water dissolution resistance. Berberine-loaded SA/PVA/PEO MFMs could potentially serve as an antibacterial wound dressing substrate with low cost and small side effects.

Chitin Nanofiber-Reinforced Waterborne Polyurethane Nanocomposite Films with Enhanced Thermal and Mechanical Performance

To attain eco-friendly polyurethane composites with enhanced thermal and mechanical properties, in this study, a series of cationic waterborne polyurethane (cWPU) nanocomposite films reinforced with 1-50 wt% chitin nanofiber (ChNF) loadings was fabricated by a facile aqueous dispersion casting. The microstructure, thermal and mechanical properties of the nanocomposite films were investigated by considering the loading content and the interfacial interaction of ChNF in the cWPU matrix. For the purpose, a hard/soft segmented cWPU with an average particle size of ∼151 nm in aqueous dispersion was synthesized by using poly(tetramethylene glycol), isophorone diisocyanate, N-methyldiethanolamine, and 1,4-butanediol. The FT-IR spectra confirmed the existence of specific hydrogen-bonding interactions between hydroxyl/acetyl amine/ammonium groups of ChNFs and urethane/protonated amine groups of cWPU hard segments. Accordingly, the thermal decomposition temperatures of cWPU/ChNF nanocomposite films increased with increasing the ChNF content. In addition, the storage moduli of cWPU/ChNF nanocomposite films increased significantly with the increment of ChNF content up to ∼7 wt%, which stems from the restricted chain mobility of cWPU backbones composed of semicrystalline soft segments and hard segments interacting with ChNFs via multiple hydrogen-bonding interactions.

Influences of cellulose nanofibril on microstructures and physical properties of waterborne polyurethane-based nanocomposite films

We herein report the effects of carboxymethylated cellulose nanofibril (c-CNF) on the microstructure, thermal and mechanical properties of waterborne polyurethane (WPU)-based nanocomposite films. For the purpose, an aqueous dispersion of hard/soft segmented WPU with a mean particle size of ∼169 nm was manufactured by using poly(propylene glycol), isophorone diisocyanate, 2,2-dimethylolpropionic acid and 1,4-butanediol. WPU nanocomposite films with 1-50 wt% c-CNF loadings were then manufactured via an efficient casting method. The FT-IR spectra revealed the presence of hydrogen-bonding interactions between the urethane/urea groups of WPU hard segments and the carboxymethyl/hydroxyl groups of c-CNF. Accordingly, the thermal and thermo-oxidative stability of the nanocomposite films was noticeably enhanced by the introduction of c-CNF. In addition, the storage moduli of the nanocomposite films as well as the glass transition temperatures of WPU hard segments increased significantly with increasing the c-CNF content by ∼7 wt% owing to the specific interactions between c-CNF and WPU hard segments.

Improvement of Mechanical Properties and Self-Healing Efficiency by Ex-Situ Incorporation of TiO2 Nanoparticles to a Waterborne Poly(Urethane-Urea)

This research work was focused on the incorporation of TiO₂ nanoparticles into synthesized solvent-free waterborne poly(urethane-urea) (WPUU) based on hydrophilic poly(ethylene oxide) (PU0) in order to improve both the mechanical properties and self-healing effectiveness of a polymer matrix. The incorporation of TiO₂ nanoparticles resulted in a successful enhancement of the mechanical properties of nanocomposite films when compared to PU0. Simultaneously, the obtained nanocomposite films did not only maintain the self-healing ability of the PU0 film, measured by means of mechanical properties after successive cutting/recovery cycles, but they also showed a higher self-healing efficiency than the PU0 film. Moreover, the well-dispersed TiO₂ nanoparticles, visualized by atomic force microscopy (AFM), kept their conductive properties when embedded in the PU0 matrix, as was confirmed by electrostatic force microscopy (EFM). This research work described a simple and industrially appealing way to control the dispersion of commercially available TiO₂ nanoparticles in waterborne poly(urethane-urea) for the designing of inorganic/organic hybrid nanocomposites with enhanced mechanical properties and self-healing efficiency, in which TiO₂ nanoparticles preserved their conductive properties within the polymer matrix.