Self-healable hyaluronic acid/chitosan polyelectrolyte complex hydrogels and multilayers

Polyelectrolyte complexes based on a novel and sustainable hemicellulose-rich lignosulphonate for drug delivery applications

Polyelectrolyte complexes (PECs) are polymeric structures formed by the self-assembly of oppositely charged polymers. Novel biomaterials based on PECs are currently under investigation as drug delivery systems, among other applications. This strategy leverages the ability of PECs to entrap drugs under mild conditions and control their release. In this study, we combined a novel and sustainably produced hemicellulose-rich lignosulphonate polymer (EH, negatively charged) with polyethyleneimine (PEI) or chitosan (CH, positively charged) and agar for the development of drug-releasing PECs. A preliminary screening demonstrated the effect of several parameters (polyelectrolyte ratio, temperature, and type of polycation) on PECs formation. From this, selected formulations were further characterized in terms of thermal properties, surface morphology at the microscale, stability, and ability to load and release methylene blue (MB) as a model drug. EH/PEI complexes had a more pronounced gel-like behaviour compared to the EH/CH complexes. Differential scanning calorimetry (DSC) results supported the establishment of polymeric interactions during complexation. Overall, PECs' stability was positively affected by low pH, ratios close to 1:1, and the addition of agar. PECs with higher EH content showed a higher MB loading, likely promoted by stronger electrostatic interactions. The EH/CH formulation enriched with agar showed the best sustained release profile of MB during the first 30 h in a pH-dependent environment simulating the gastrointestinal tract. Overall, we defined the conditions to formulate novel PECs based on a sustainable hemicellulose-rich lignosulphonate for potential applications in drug delivery, which promotes the valuable synergy between sustainability and the biomedical field.

Development of dual drug loaded-hydrogel scaffold combining microfluidics and coaxial 3D-printing for intravitreal implantation

Treating diabetic retinopathy (DR) effectively is challenging, aiming for high efficacy with minimal discomfort. While intravitreal injection is the current standard, it has several disadvantages. Implantable systems offer an alternative, less invasive, with long-lasting effects drug delivery system (DDS). The current study aims to develop a soft, minimally invasive, biodegradable, and bioadhesive material-based hydrogel scaffold to prevent common issues with implants. A grid-shaped scaffold was created using coaxial 3D printing (3DP) to extrude two bioinks in a single filament. The scaffold comprises an inner core of curcumin-loaded liposomes (CUR-LPs) that prepared by microfluidics (MFs) embedded in a hydrogel of hydroxyethyl cellulose (HEC), and an outer layer of hyaluronic acid-chitosan matrix with free resveratrol (RSV), delivering two Sirt1 agonists synergistically activating Sirt1 downregulated in DR. Optimized liposomes, prepared via MFs, exhibit suitable properties for retinal delivery in terms of size (<200 nm), polydispersity index (PDI) (<0.3), neutral zeta potential (ZP), encapsulation efficiency (∼97 %), and stability up to 4 weeks. Mechanical studies confirm scaffold elasticity for easy implantation. The release profiles show sustained release of both molecules, with different patterns related to different localization of the molecules. RSV released initially after 30 min with a total release more than 90 % at 336 h. CUR release starts after 24 h with only 4.78 % of CUR released before and gradually released thanks to its internal localization in the scaffold. Liposomes and hydrogels can generate dual drug-loaded 3D structures with sustained release. Microscopic analysis confirms optimal distribution of liposomes within the hydrogel scaffold. The latter resulted compatible in vitro with human retinal microvascular endothelial cells up to 72 h of exposition. The hydrogel scaffold, composed of hyaluronic acid and chitosan, shows promise for prolonged treatment and minimally invasive surgery.

Doxorubicin-loaded liposome-like particles embedded in chitosan/hyaluronic acid-based hydrogels as a controlled drug release model for local treatment of glioblastoma

Glioblastoma (GBM) resection and medication treatment are limited, and local drug therapies are required. This study aims to create a hybrid system comprising liposome-like particles (LLP-DOX) encapsulated in chitosan/hyaluronic acid/polyethyleneimine (CHI/HA/PEI) hydrogels, enabling controlled local delivery of doxorubicin (DOX) into the resection cavity for treating GBM. CHI/HA/PEI hydrogels were characterized morphologically, physically, chemically, mechanically, and thermally. Findings revealed a high network and compact micro-network structure, along with enhanced physical and thermal stability compared to CHI/HA hydrogels. Simultaneously, drug release from CHI/HA/PEI/LLP-DOX hydrogels was assessed, revealing continuous and controlled release up to the 148th hour, with no significant burst release. Cell studies showed that CHI/HA/PEI hydrogels are biocompatible with low genotoxicity. Additionally, LLP-DOX-loaded CHI/HA/PEI hydrogels significantly decreased cell viability and gene expression levels compared to LLP-DOX alone. It was also observed that the viability of GBM spheroids decreased over time when interacting with CHI/HA/PEI/LLP-DOX hydrogels, accompanied by a reduction in total surface area and an increase in apoptotic tendencies. In this study, we hypothesized that creating a hybrid drug delivery system by encapsulating DOX-loaded LLPs within a CHI/HA/PEI hydrogel matrix could achieve sustained drug release, improve anticancer efficacy via localized treatment, and effectively mitigate GBM progression for 3D microtissues.

Temperature-Regulated Synthesis of Hyaluronic Acid-Interpenetrated Polyacrylamide/Poly(Acrylic Acid Sodium Salt) Semi-Interpenetrated Polymer Network Gel for the Removal of Methyl Violet

An alternative synthetic pathway was proposed for the optimization of synthesis to find a better correlation between the swelling and elasticity of hyaluronic acid-interpenetrated gels via temperature regulation. An experimental design methodology was presented for the synthesis of polyacrylamide/poly(acrylic acid sodium salt)/hyaluronic acid, PAAm/PSA/HyA, gels by modifying the one-pot procedure using free radical crosslinking copolymerization of AAm with the addition of anionic linear PSA chains in the presence of various amount of HyA, ranging between 0.05% and 0.20% (w/v). Semi-interpenetrated polymer network (IPN)-structured gels were designed with tunable elasticity, in which the extent of covalent crosslinking interactions is controlled by polymerization temperature ranging between -18 and 45 °C. Depending on the HyA content added in the synthesis and the polymerization temperature, the swelling ratio could be controlled. The addition of 0.05% (w/v) HyA increased the swelling of semi-IPNs, while the elastic modulus increased with increasing HyA content and decreased with the polymerization temperature. PAAm/PSA/HyA semi-IPNs showed the typical pH-sensitive swelling of anionic gels, and the swelling reached a maximum at a pH of 11.2. PAAm/PSA/HyA gels were tested for the removal of methyl violet from wastewater. Adsorption kinetics were shown to be well-fitted with the pseudo-second-order model using linear and nonlinear regression analysis. With the clear relationship between increased modulus and composition, this study enabled the fine-tuning of semi-IPN interactions by varying the polymerization temperature.

Hyaluronate loaded advanced wound dressing in form of in situ forming hydrogel powders: Formulation, characterization, and therapeutic potential

In this paper, a blend composed of alginate-pectin-chitosan loaded with sodium hyaluronate in the form of an in situ forming dressing was successfully developed for wound repair applications. This complex polymeric blend has been efficiently used to encapsulate hyaluronate, forming an adhesive, flexible, and non-occlusive hydrogel able to uptake to 15 times its weight in wound fluid, and being removed without trauma from the wound site. Calorimetric and FT-IR studies confirmed chemical interactions between hyaluronate and polysaccharides blend, primarily related to the formation of a polyelectrolytic complex between hyaluronate and chitosan. In vivo wound healing assays on murine models highlighted the ability of the loaded hydrogels to significantly accelerate wound healing compared to a hyaluronic-loaded ointment. This was evident through complete wound closure in <10 days, accompanied by fully restored epidermal functionality and no indications of the site of excision or treatment. Therefore, all these results suggest that hyaluronate-loaded powders could be a very promising conformable dressing in several wound healing applications where exudate is present.

Chitosan/Hyaluronate Complex-Coated Electrospun Poly(3-hydroxybutyrate) Materials Containing Extracts from Melissa officinalis and/or Hypericum perforatum with Various Biological Activities: Antioxidant, Antibacterial and In Vitro Anticancer Effects

The present study aimed to fabricate innovative fibrous materials with various biological activities from poly(3-hydroxybutyrate), sodium hyaluronate (HA), chitosan (Ch), Melissa officinalis (MO), Hypericum perforatum (HP) extract, or a combination of both extracts. Electrospinning or electrospinning followed by dip coating and the subsequent formation of a polyelectrolyte complex were the methods used to prepare these materials. Scanning electron microscopy (SEM), transmission electron microscopy (TEM), thermogravimetric analysis (TGA), and attenuated total reflection-Fourier transform infrared spectroscopy (ATR-FTIR) were applied for investigating the morphology of materials, their thermal characteristics, and their surface chemical composition. The composition and design of the mats had an influence on the in vitro release behavior of the main bioactive compounds present in the MO and HP extracts incorporated in the materials. It was found that as-created materials comprising a combination of both extracts and a Ch/HA complex exerted higher antioxidant activity than that of (non-)coated MO-containing mats and Ch/HA-coated mats containing HP. The novel materials manifested antibacterial efficacy towards the pathogenic bacteria S. aureus and E. coli, as evidenced by the performed microbiological screening. Furthermore, the mats possessed a great growth inhibitory effect on HeLa cancer cells but had a less pronounced effect on the growth of normal mouse BALB/3T3 fibroblasts. The loading of both extracts in the mats and the formation of coating led to the enhancement of the in vitro anticancer and antibacterial activities of the materials. Thus, the novel materials have potential for use in local cancer therapy as well as for use as wound dressings.

pH-Sensitive Hydrogels Fabricated with Hyaluronic Acid as a Polymer for Site-Specific Delivery of Mesalamine

Hydrogels with the main objective of releasing mesalamine (5-aminosalicylic acid) in the colon in a modified manner were formulated in the present work using a free-radical polymerization approach. Different ratios of hyaluronic acid were cross-linked with methacrylic and acrylic acids using methylenebis(acrylamide). The development of a new polymeric network and the successful loading of drug were revealed by Fourier transform infrared spectroscopy. Thermogravimetric analysis demonstrated that the hydrogel was more thermally stable than the pure polymer and drug. Scanning electron microscopy (SEM) revealed a rough and hard surface which was relatively suitable for efficient loading of drug and significant penetration of dissolution medium inside the polymeric system. Studies on swelling and drug release were conducted at 37 °C in acidic and basic conditions (pH 1.2, 4.5, 6.8, and 7.4, respectively). Significant swelling and drug release occurred at pH 7.4. Swelling, drug loading, drug release, and gel fraction of the hydrogels increased with increasing hyaluronic acid, methacrylic acid, and acrylic acid concentrations, while the sol fraction decreased. Results obtained from the toxicity study proved the formulated system to be safe for biological systems. The pH-sensitive hydrogels have the potential to be beneficial for colon targeting due to their pH sensitivity and biodegradability. Inflammatory bowel disease may respond better to hydrogel treatment as compared to conventional dosage forms. Specific amount of drug is released from hydrogels at specific intervals to maintain its therapeutic concentration at the required level.

Injectable Hydrogels: A Paradigm Tailored with Design, Characterization, and Multifaceted Approaches

Biomaterials denoting self-healing and versatile structural integrity are highly curious in the biomedicine segment. The injectable and/or printable 3D printing technology is explored in a few decades back, which can alter their dimensions temporarily under shear stress, showing potential healing/recovery tendency with patient-specific intervention toward the development of personalized medicine. Thus, self-healing injectable hydrogels (IHs) are stunning toward developing a paradigm for tissue regeneration. This review comprises the designing of IHs, rheological characterization and stability, several benchmark consequences for self-healing IHs, their translation into tissue regeneration of specific types, applications of IHs in biomedical such as anticancer and immunomodulation, wound healing and tissue/bone regeneration, antimicrobial potentials, drugs, gene and vaccine delivery, ocular delivery, 3D printing, cosmeceuticals, and photothermal therapy as well as in other allied avenues like agriculture, aerospace, electronic/electrical industries, coating approaches, patents associated with therapeutic/nontherapeutic avenues, and numerous futuristic challenges and solutions.

Exploring the Progress of Hyaluronic Acid Hydrogels: Synthesis, Characteristics, and Wide-Ranging Applications

This comprehensive review delves into the world of hyaluronic acid (HA) hydrogels, exploring their creation, characteristics, research methodologies, and uses. HA hydrogels stand out among natural polysaccharides due to their distinct features. Their exceptional biocompatibility makes them a top choice for diverse biomedical purposes, with a great ability to coexist harmoniously with living cells and tissues. Furthermore, their biodegradability permits their gradual breakdown by bodily enzymes, enabling the creation of temporary frameworks for tissue engineering endeavors. Additionally, since HA is a vital component of the extracellular matrix (ECM) in numerous tissues, HA hydrogels can replicate the ECM's structure and functions. This mimicry is pivotal in tissue engineering applications by providing an ideal setting for cellular growth and maturation. Various cross-linking techniques like chemical, physical, enzymatic, and hybrid methods impact the mechanical strength, swelling capacity, and degradation speed of the hydrogels. Assessment tools such as rheological analysis, electron microscopy, spectroscopy, swelling tests, and degradation studies are employed to examine their attributes. HA-based hydrogels feature prominently in tissue engineering, drug distribution, wound recovery, ophthalmology, and cartilage mending. Crafting HA hydrogels enables the production of biomaterials with sought-after qualities, offering avenues for advancements in the realm of biomedicine.

Injectable, self-healing hyaluronic acid-based hydrogels for spinal cord injury repair

The cystic cavity that develops following spinal cord injury is a major obstacle for repairing spinal cord injury (SCI). The injectable self-healing biomaterials treatment is a promising strategy to enhance tissue repair after traumatic spinal cord injury. Herein, a natural extracellular matrix (ECM) biopolymer hyaluronic acid-based hydrogel was developed based on multiple dynamic covalent bonds. The hydrogels exhibited excellent injectable and self-healing properties, could be effectively injected into the injury site, and filled the lesion cavity to accelerate the tissue repair of traumatic SCI. Moreover, the hydrogels were compatible with cells and various tissues and possessed proper stiffness matched with nervous tissue. Additionally, when implanted into the injured spinal cord site, the hyaluronic acid-based hydrogel promoted axonal regeneration and functional recovery by accelerating remyelination, axon regeneration, and angiogenesis. Overall, the injectable self-healing hyaluronic acid-based hydrogels are ideal biomaterials for treating traumatic SCI.

Smart/stimuli-responsive chitosan/gelatin and other polymeric macromolecules natural hydrogels vs. synthetic hydrogels systems for brain tissue engineering: A state-of-the-art review

Currently, there are no viable curative treatments that can enhance the central nervous system's (CNS) recovery from trauma or illness. Bioengineered injectable smart/stimuli-responsive hydrogels (SSRHs) that mirror the intricacy of the CNS milieu and architecture have been suggested as a way to get around these restrictions in combination with medication and cell therapy. Additionally, the right biophysical and pharmacological stimuli are required to boost meaningful CNS regeneration. Recent research has focused heavily on developing SSRHs as cutting-edge delivery systems that can direct the regeneration of brain tissue. In the present article, we have discussed the pathology of brain injuries, and the applicable strategies employed to regenerate the brain tissues. Moreover, the most promising SSRHs for neural tissue engineering (TE) including alginate (Alg.), hyaluronic acid (HA), chitosan (CH), gelatin, and collagen are used in natural polymer-based hydrogels and thoroughly discussed in this review. The ability of these hydrogels to distribute bioactive substances or cells in response to internal and external stimuli is highlighted with particular attention. In addition, this article provides a summary of the most cutting-edge techniques for CNS recovery employing SSRHs for several neurodegenerative diseases.

Multifunctional Wound Curation Dressing Material FemuFrost─An Antioxidant-Loaded Nanoemulsion Frosted Patch of Poly(vinyl alcohol) and Hyaluronic Acid

The wound curation dressing material should own explicit elements to aggrandize wound cessation. The cryogel of poly(vinyl alcohol) (PVA) and hyaluronic acid (HA) is deemed to promote the angiogenesis, production of extracellular matrix components, granulation, and epithelialization. The research aims to tailor and evaluate the composite PVA/HA cryogel ingrained ferulic acid-loaded nanoemulsion patch labeled as PH-FemuFrost to improve the therapeutic properties and mechanical strength of the patches. The PH-FemuFrost exhibited a water uptake capacity of 268 ± 15.07%, porosity of 70.52 ± 7.4%, and 48.62 ± 2.2% in vitro degradation. The texture analysis revealed the improved mechanical properties of PH-FemuFrost in terms of burst strength and stiffness. The PH-FemuFrost exhibited in vitro antioxidant and antimicrobial activity against Staphylococcus aureus and Candida albicans species. The wound healing efficiency of PH-FemuFrost patches was significantly increased than blank PVA-HA patches. The groups treated with PH-FemuFrost exhibited a dense network of collagen type 1 in comparison to negative and PVA-HA groups. The normal skin and healed skin exhibited parallel arrangement of type I collagen fibers toward the skin. The levels of inflammatory mediators such as IL-6 (p value < 0.0001), IL-22 (p value 0.0098), and TNF-α levels (p value < 0.0001) of PH-FemuFrost is significantly reduced compared to the negative group.

Development of Chitosan/Sodium Carboxymethylcellulose Complexes to Improve the Simvastatin Release Rate: Polymer/Polymer and Drug/Polymer Interactions' Effects on Kinetic Models

Simvastatin (SIM) is a potent lipid-lowering drug used to control hyper-cholesterolemia and prevent cardiovascular diseases. SIM presents low oral bioavailability (5%) because of its low aqueous solubility. In this work, polyelectrolyte complexes (PEC) are developed with different chitosan (CS) and carboxymethylcellulose (CMC) ratios that will allow for an increase in the SIM dissolution rate (2.54-fold) in simulated intestinal medium (pH 4.5). Scanning Electron Microscopy (SEM) images revealed highly porous structures. The changes between both complexes, PEC-SIM:CS:CMC (1:1:2) and (1:2:1), were related to the relaxation of the polymer chains upon absorption of the dissolution medium. Fourier-transform infrared spectroscopy (FTIR), differential scanning calorimetry (DSC) and powder X-ray diffraction (XRPD) studies were used to evaluate the polymer/polymer and drug/polymer interactions on the different PEC-SIM:CS:CMC ratios. In addition, the PEC-SIM:CS:CMC (1:2:1) complex exhibited a high ratio of protonated amino groups (NH3+) and an increase in intramolecular hydrogen bonds, which were correlated with a high expansion of the interpolymer chains and an increase in the SIM dissolution rate. Different kinetic models such as zero-order, first-order, Higuchi and Korsmeyer-Peppas were studied to evaluate the influence of CS/CMC ionic interactions on the ability to improve the release rate of poorly soluble drugs.

Double network hydrogels: Design, fabrication, and application in biomedicines and foods

Research on the design, fabrication, and application of double network (DN) hydrogels, assembled from pairs of polymers, has grown recently due to their unique structural, physicochemical, and functional properties. DN hydrogels can be designed to exhibit a broader range of functional attributes than single network (SN) ones, which extends their applications in various fields. There has been strong interest in the development of biopolymer DN hydrogels because of their environmental, sustainability, and safety benefits. However, there is limited knowledge on the formation and application of these novel materials. This article reviews the principles underlying the design and fabrication of hydrogels using different crosslinking approaches, including covalent and/or non-covalent bonding, and the formation mechanisms, network structures, and functional attributes of different DN hydrogels. The impact of polymer composition, structural organization, and bonding on the mechanical and functional properties of DN hydrogels is reviewed. Potential applications of these hydrogels are highlighted, including in tissue engineering, biomedicines, and foods. The functional attributes of DN hydrogels can be tailored to each of these applications by careful selection of the biopolymers and crosslinking mechanisms used to assemble them. Finally, areas where further research are needed to overcome the current limitations of DN hydrogels are highlighted.

Synthesis and characterization of Hyaluronic Acid (HA) modified polymeric composite for effective treatment of wound healing by transdermal drug delivery system (TDDS)

The present study aimed to fabricate a novel polymeric spongy composite to enhance skin regeneration composed of Nystatin (antifungal agent) and Silver Nanoparticles (AgNps). Different formulations (F1-F8) were developed & characterized by using various analytical techniques. AgNps synthesized by chemical reduction method showed spherical morphology 2 µm in size showed by SEM and XRD. A fine porous structure of gel embedded with AgNps having an amorphous structure with 10 % crystallinity due to AgNps was found. IR spectra revealed no chemical interaction between polymers and Nystatin. An increase in thermal stability of formulation was observed till 700 ℃ analyzed by Differential Scanning Calorimetry. Cytotoxic analysis on L929 mouse skin fibroblast cells showed a decrease in cell viability as Ag concentration increased (inactivating Fibroblast and keratinocytes) while 10 mg composition was found safest concentration (94%). Optimized formulation (F2) presented in-vitro drug release up to 90.59% ± 0.76 at pH 7.4, swelling studies (87.5% ± 0.57), water retention (26.60 ± 0.34), pH (5.31 ± 0.03). In the animal burn model, the group that received CHG/Ag/Nystatin healed the wound significantly (p < 0.05). These results suggested that optimized carrier can be used for other anti-fungal drugs facilitating the early healing of the wound.

Functionalization of hyaluronic acid for development of self-healing hydrogels for biomedical applications: A review

Materials that are capable of undergoing self-repair following any physical damage or rupture due to external stimuli are identified as self-healing materials. Such materials are engineered by crosslinking the polymer backbone chains typically through reversible linkages. These reversible linkages include imines, metal-ligand coordination, polyelectrolyte interaction, disulfide, etc. These bonds are reversibly responsive to changes in various stimuli. Newer self-healing materials are now being developed in the field of biomedicine. Chitosan, cellulose, starch etc. are a few examples of polysaccharides that are generally used to synthesize such materials. Hyaluronic acid has been a very recent addition to the list of polysaccharides that are being investigated for construction of self-healing materials. It is non-toxic, non-immunogenic, has good gelation property and good injectability. Hyaluronic acid based self-healing materials are particularly employed for targeted drug delivery, protein and cell delivery, electronics, biosensors and many such biomedical applications. This review critically focuses on the functionalization of hyaluronic acid to fabricate self-healing hydrogels for biomedical applications. It also explores and sums up the mechanical data as well as self-healing efficiency of the hydrogels across wide range of interactions as discussed in the review below.

An Updated Review on Advances in Hydrogel-Based Nanoparticles for Liver Cancer Treatment

More than 90% of all liver malignancies are hepatocellular carcinomas (HCCs), for which chemotherapy and immunotherapy are the ideal therapeutic choices. Hepatocellular carcinoma is descended from other liver diseases, such as viral hepatitis, alcoholism, and metabolic syndrome. Normal cells and tissues may suffer damage from common forms of chemotherapy. In contrast to systemic chemotherapy, localized chemotherapy can reduce side effects by delivering a steady stream of chemotherapeutic drugs directly to the tumor site. This highlights the significance of controlled-release biodegradable hydrogels as drug delivery methods for chemotherapeutics. This review discusses using hydrogels as drug delivery systems for HCC and covers thermosensitive, pH-sensitive, photosensitive, dual-sensitive, and glutathione-responsive hydrogels. Compared to conventional systemic chemotherapy, hydrogel-based drug delivery methods are more effective in treating cancer.

New Smart Bioactive and Biomimetic Chitosan-Based Hydrogels for Wounds Care Management

Wound management represents a continuous challenge for health systems worldwide, considering the growing incidence of wound-related comorbidities, such as diabetes, high blood pressure, obesity, and autoimmune diseases. In this context, hydrogels are considered viable options since they mimic the skin structure and promote autolysis and growth factor synthesis. Unfortunately, hydrogels are associated with several drawbacks, such as low mechanical strength and the potential toxicity of byproducts released after crosslinking reactions. To overcome these aspects, in this study new smart chitosan (CS)-based hydrogels were developed, using oxidized chitosan (oxCS) and hyaluronic acid (oxHA) as nontoxic crosslinkers. Three active product ingredients (APIs) (fusidic acid, allantoin, and coenzyme Q10), with proven biological effects, were considered for inclusion in the 3D polymer matrix. Therefore, six API-CS-oxCS/oxHA hydrogels were obtained. The presence of dynamic imino bonds in the hydrogels' structure, which supports their self-healing and self-adapting properties, was confirmed by spectral methods. The hydrogels were characterized by SEM, swelling degree, pH, and the internal organization of the 3D matrix was studied by rheological behavior. Moreover, the cytotoxicity degree and the antimicrobial effects were also investigated. In conclusion, the developed API-CS-oxCS/oxHA hydrogels have real potential as smart materials in wound management, based on their self-healing and self-adapting properties, as well as on the benefits of APIs.

Chitosan - dextran phosphate carbamate hydrogels for locally controlled co-delivery of doxorubicin and indomethacin: From computation study to in vivo pharmacokinetics

The development of synergistic drug combinations is a promising strategy for effective cancer suppression. Here, we report all-polysaccharide biodegradable polyelectrolyte complex hydrogels (DPCS) based on dextran phosphate carbamate (DP) and chitosan (CS) for controlled co-delivery of the anticancer drug doxorubicin (DOX) and the non-steroidal anti-inflammatory drug indomethacin (IND). IND can induce more apoptosis in tumor cells by reducing the level of multidrug resistance-associated protein 1. Based on calculations using density functional theory and zeta potential analysis data, carriers with high drug loading were obtained. The release profile of both drugs from the hydrogels was tuned by changing the molecular weight and functional groups content of the polysaccharides. The optimized DPCS showed a steady release of DOX both in vitro and in vivo, and a gradual release of IND, which constantly induced the action of DOX. Considering all of these benefits, DOX- and IND-loaded DPCS offer a promising long-acting polysaccharide-based antitumor platform.

Extraction and characterization of hyaluronic acid from the eyeball of Nile Tilapia (Oreochromis niloticus)

Hyaluronic acid (HA) is a biopolymer of enormous value aggregation for in general industry. The vitreous humor of the eyeball from Nile tilapia contains appreciable amounts of hyaluronic acid. In this sense, the aim of this work was to extract and characterize hyaluronic acid from the eyeball of the Nile tilapia for biomedical applications, adding value to fish industry residues. The characterization by infra-red (FTIR), ¹³C nuclear magnetic resonance (NMR) and high performance liquid chromatography (HPLC) confirmed that hyaluronic acid was obtained. The gel permeation chromatography (GPC) showed that the obtained material presents a low molecular mass (37 KDa). Thermogravimetry (TGA), differential scanning calorimetry (DSC), X-ray diffraction (XRD) analysis showed that the materials present a thermal stability superior to the commercial hyaluronic acid from Streptococcus equi, with a partially crystalline character. The cytotoxicity assay (MTT method) with fibroblast cells (L929) demonstrated that the extracted biopolymer besides not being cytotoxic, was able to stimulate cell proliferation. Therefore, the hyaluronic acid extracted from this source of residue constitutes a product with biotechnological potential, which has adequate quality for wide biomedical applications.

Chitosan, chondroitin sulfate, and hyaluronic acid based in-situ forming scaffold for efficient cell grafting

Current cell grafting techniques are majorly dependent on seeding cells on a pre-formed scaffold. However, cells grow in a 2-dimensional (2D) space in such constructs, not mimicking the tissue's 3-dimensional (3D) architecture. The present study evaluated a unique poly-electrolyte complexation (PEC) based strategy for the 3D engraftment of cells in a porous polymeric scaffold. The scaffold was synthesized using a positively charged polysaccharide chitosan (CH) and negatively charged glycosaminoglycans chondroitin sulfate (CS) and hyaluronic acid (HA). Two different scaffolds were synthesized, one using CH and CS [CH-CS] and another using CH and CS + HA [CH-(CS-HA)]. The physicochemical characterization of both the PECs confirmed electrostatic interactions, leading to a porous and viscoelastic PEC formation. Fibroblast cells were grafted and seeded in both scaffolds to evaluate the effect of different scaffold compositions and the difference between seeded and grafted cells. Imaging studies confirmed that grafting of the fibroblast cells supports cellular proliferation. The qPCR studies demonstrated increased expression of functional markers TGF-β, α-SMA, collagen-I, and fibronectin in the CH-(CS-HA) grafted cells. In summary, it was demonstrated that an in-situ forming PEC of CH, CS, and HA had good physicochemical properties for cell grafting and supported grafted cells with improved function.

Exploiting Polyelectrolyte Complexation for the Development of Adhesive and Bioactive Membranes Envisaging Guided Tissue Regeneration

Mussels secrete protein-based byssal threads to tether to rocks, ships, and other organisms underwater. The secreted marine mussel adhesive proteins (MAPs) contain the peculiar amino acid L-3,4-dihydroxyphenylalanine (DOPA), whose catechol group content contributes greatly to their outstanding adhesive properties. Inspired by such mussel bioadhesion, we demonstrate that catechol-modified polysaccharides can be used to obtain adhesive membranes using the compaction of polyelectrolyte complexes (CoPEC) method. It is a simple and versatile approach that uses polyelectrolyte complexes as building blocks that coalesce and dry as membrane constructs simply as a result of sedimentation and mild temperature. We used two natural and biocompatible polymers: chitosan (CHI) as a polycation and hyaluronic acid (HA) as a polyanion. The CoPEC technique also allowed the entrapment of ternary bioactive glass nanoparticles to stimulate mineralization. Moreover, combinations of these polymers modified with catechol groups were made to enhance the adhesive properties of the assembled membranes. Extensive physico-chemical characterization was performed to investigate the successful production of composite CoPEC membranes in terms of surface morphology, wettability, stability, mechanical performance, in vitro bioactivity, and cellular behavior. Considering the promising properties exhibited by the obtained membranes, new adhesives suitable for the regeneration of hard tissues can be envisaged.

Hydrogels for localized chemotherapy of liver cancer: a possible strategy for improved and safe liver cancer treatment

The systemic drug has historically been preferred for the treatment of the majority of pathological conditions, particularly liver cancer. Indeed, this mode of treatment is associated with adverse reactions, toxicity, off-target accumulation, and rapid hepatic and renal clearance. Numerous efforts have been made to design systemic therapeutic carriers to improve retention while decreasing side effects and clearance. Following systemic medication, local administration of therapeutic agents allows for higher 'effective' doses with fewer side effects, kidney accumulation, and clearance. Hydrogels are highly biocompatible and can be used for both imaging and therapy. Hydrogel-based drug delivery approach has fewer side effects than traditional chemotherapy and can deliver drugs to tumors for a longer time. The chemical and physical flexibility of hydrogels can be used to achieve disease-induced in situ accumulation as well as subsequent drug release and hydrogel-programmed degradation. Moreover, they can act as a biocompatible depot for localized chemotherapy when stimuli-responsive carriers are administrated. Herein, we summarize the design strategies of various hydrogels used for localized chemotherapy of liver cancer and their delivery routes, as well as recent research on smart hydrogels.

Injectable Natural Polymer Hydrogels for Treatment of Knee Osteoarthritis

Osteoarthritis (OA) is a serious chronic and degenerative disease that increasingly occurs in the aged population. Its current clinical treatments are limited to symptom relief and cannot regenerate cartilage. Although a better understanding of OA pathophysiology has been facilitating the development of novel therapeutic regimen, delivery of therapeutics to target sites with minimal invasiveness, high retention, and minimal side effects remains a challenge. Biocompatible hydrogels have been recognized to be highly promising for controlled delivery and release of therapeutics and biologics for tissue repair. In this review, the current approaches and the challenges in OA treatment, and unique properties of injectable natural polymer hydrogels as delivery system to overcome the challenges are presented. The common methods for fabrication of injectable polysaccharide-based hydrogels and the effects of their composition and properties on the OA treatment are detailed. The strategies of the use of hydrogels for loading and release cargos are also covered. Finally, recent efforts on the development of injectable polysaccharide-based hydrogels for OA treatment are highlighted, and their current limitations are discussed.

The Potential of Polyelectrolyte Multilayer Films as Drug Delivery Materials

Polyelectrolyte multilayers (PEMs) represent a group of polyelectrolyte complex (PEC)–based materials widely investigated in the biomedical and pharmaceutical sciences. Despite the unflagging popularity of the aforementioned systems in tissue engineering, only a few updated scientific reports concerning PEM potential in drug administration can be found. In fact, PEM coatings are currently recognized as important tools for functionalizing implantable scaffolds; however, only a small amount of attention has been given to PEMs as drug delivery materials. Scientific reports on PEMs reveal two dominant reasons for the limited usability of multilayers in pharmaceutical technology: complex and expensive preparation techniques as well as high sensitivity of interacting polyelectrolytes to the varieties of internal and external factors. The aim of this work was to analyze the latest approaches, concerning the potential of PEMs in pharmacy, chemical technology, and (primarily) tissue engineering, with special attention given to possible polymer combinations, technological parameters, and physicochemical characteristics, such as hydrophilicity, adhesive and swelling properties, and internal/external structures of the systems formed. Careful recognition of the above factors is crucial in the development of PEM-based drug delivery materials.

New Insights of Scaffolds Based on Hydrogels in Tissue Engineering

In recent years, biomaterials development and characterization for new applications in regenerative medicine or controlled release represent one of the biggest challenges. Tissue engineering is one of the most intensively studied domain where hydrogels are considered optimum applications in the biomedical field. The delicate nature of hydrogels and their low mechanical strength limit their exploitation in tissue engineering. Hence, developing new, stronger, and more stable hydrogels with increased biocompatibility, is essential. However, both natural and synthetic polymers possess many limitations. Hydrogels based on natural polymers offer particularly high biocompatibility and biodegradability, low immunogenicity, excellent cytocompatibility, variable, and controllable solubility. At the same time, they have poor mechanical properties, high production costs, and low reproducibility. Synthetic polymers come to their aid through superior mechanical strength, high reproducibility, reduced costs, and the ability to regulate their composition to improve processes such as hydrolysis or biodegradation over variable periods. The development of hydrogels based on mixtures of synthetic and natural polymers can lead to the optimization of their properties to obtain ideal scaffolds. Also, incorporating different nanoparticles can improve the hydrogel's stability and obtain several biological effects. In this regard, essential oils and drug molecules facilitate the desired biological effect or even produce a synergistic effect. This study's main purpose is to establish the main properties needed to develop sustainable polymeric scaffolds. These scaffolds can be applied in tissue engineering to improve the tissue regeneration process without producing other side effects to the environment.

Multicompartment Hydrogels

Hydrogels belong to the most promising materials in polymer and materials science at the moment. As they feature soft and tissue-like character as well as high water-content, a broad range of applications are addressed with hydrogels, e.g. tissue engineering and wound dressings but also soft robotics, drug delivery, actuators and catalysis. Ways to tailor hydrogel properties are crosslinking mechanism, hydrogel shape and reinforcement, but new features can be introduced by variation of hydrogel composition as well, e.g. via monomer choice, functionalization or compartmentalization. Especially, multicompartment hydrogels drive progress towards complex and highly functional soft materials. In the present review the latest developments in multicompartment hydrogels are highlighted with a focus on three types of compartments, i.e. micellar/vesicular, droplets or multi-layers including various sub-categories. Furthermore, several morphologies of compartmentalized hydrogels and applications of multicompartment hydrogels will be discussed as well. Finally, an outlook towards future developments of the field will be given. The further development of multicompartment hydrogels is highly relevant for a broad range of applications and will have a significant impact on biomedicine and organic devices. This article is protected by copyright. All rights reserved.

Dextran-based polyelectrolyte multilayers: Effect of charge density on film build-up and morphology

We have studied the growth process of thin polyelectrolyte (PE) films fabricated by the layer-by-layer assembly (LbL) and composed of Dextran sulfate with high (DexS H) and low (DexS L) sulfation rate and poly(allylamine hydrochloride) (PAH). Film growths were monitored by combining Quartz Crystal Microbalance with Dissipation monitoring (QCM-D), Surface Plasmon Resonance (SPR) and Atomic Force Microscopy (AFM). Even though, the two films growth up to 10 bilayers, QCM-D showed that polyelectrolyte pairs do not display similar behaviours. (PAH/DexS H) systems lead to linear growth, i.e. amounts deposited increase both for PAH and DexS H, while the PAH/DexS L pair generated zig-zag shaped asymmetric growth. Film water contents were determined by QCM-D solvent exchange and SPR experiments. DexS L contains less water than DexS H and in agreement with the QCM-D dissipation values that suggest the formation of more rigid films in the case of DexS L than DexS H. Surface morphology investigated by AFM display distinct surface patterns since DexS H form thin films with fibril-like morphology covering all the surface while heterogeneous films with "puddle-like" aggregates were imaged in the case of DexS L. Difference of charge compensation and charge neutralisation between both systems likely lead to dissimilar growth mechanisms that are tentatively proposed in this paper.

Multilayer Films Based on Chitosan/Pectin Polyelectrolyte Complexes as Novel Platforms for Buccal Administration of Clotrimazole

Buccal films are recognized as easily applicable, microbiologically stable drug dosage forms with good retentivity at the mucosa intended for the therapy of oromucosal conditions, especially infectious diseases. Multilayer films composed of layers of oppositely charged polymers separated by ionically interacting polymeric chains creating polyelectrolyte complexes represent very interesting and relatively poorly explored area. We aimed to develop the antifungal multilayer systems composed of cationic chitosan and anionic pectin as potential platforms for controlled delivery of clotrimazole. The systems were pharmaceutically characterized with regard to inter alia their release kinetics under different pH conditions, physicomechanical, or mucoadhesion properties with using an animal model of the buccal mucosa. The antifungal activity against selected Candida sp. and potential cytotoxicity with regard to human gingival fibroblasts were also evaluated. Interactions between polyions were characterized with Fourier transform infrared spectroscopy. Different clotrimazole distribution in the films layers highly affected their in vitro dissolution profile. The designed films were recognized as intelligent pH-responsive systems with strong antifungal effect and satisfactory safety profile. As addition of chitosan resulted in the improved antifungal behavior of the drug, the potential utilization of the films in resistant cases of oral candidiasis might be worth of further exploration.

Development of an in-situ forming, self-healing scaffold for dermal wound healing: in-vitro and in-vivo studies

The importance of the extra-cellular matrix (ECM) for wound healing has been extensively researched. Understanding its importance, multiple ECM mimetic scaffolds have been developed. However, the majority of such scaffolds are prefabricated. Due to their stiffness, prefabricated scaffolds cannot come into direct contact with the basal skin cells at the wound bed, limiting their efficacy. We have developed a unique wound dressing, using chitosan (CH) and chondroitin sulfate (CS), that can form a porous scaffold (CH-CS PEC) in-situ, at the wound site, by simple mixing of the polymer solutions. As CH is positively and CS is negatively charged, mixing these two polymer solutions would lead to electrostatic cross-linking between the polymers, converting them to a porous, viscoelastic scaffold. Owing to the in-situ formation, the scaffold can come in direct contact with the cells at the wound bed, supporting their proliferation and biofunction. In the present study, we confirmed the cross-linked scaffold formation by solid-state NMR, XRD, and TGA analysis. We have demonstrated that the scaffold had a high viscoelastic property, with self-healing capability. Both keratinocyte and fibroblast cells exhibited significantly increased migration and functional markers expression when grown on this scaffold. In the rat skin-excisional wound model, treatment with the in-situ forming CH-CS PEC exhibited enhanced wound healing efficacy. Altogether, this study demonstrated that mixing CH and CS solutions lead to the spontaneous formation of a highly viscoelastic, porous scaffold, which can support epidermal and dermal cell proliferation and bio-function, with an enhanced in-vivo wound healing efficacy.

3D printable self-healing hyaluronic acid/chitosan polycomplex hydrogels with drug release capability

Multifunctional printable biomaterials are at the base of advanced biomedical applications. Chitosan (CHI) and hyaluronic acid (HA) allow the development of polycomplex hydrogels with tailorable properties, including self-healing and controlled drug release. This work correlates and optimizes the mucoadhesive, swelling, biodegradation, mechanical and rheological properties of HA/CHI polycomplex hydrogels with synthesis parameters such as polysaccharide content and complexation time, according to the interaction forces established between both polyelectrolytes. Related to these dynamic forces, the self-healing ability of the hydrogels was investigated together with the potential of the HA/CHI polycomplex hydrogels for 3D printing. Finally, their capability to modulate and promote controlled release of a variety of drugs (anionic and anti-inflammatory sodium diclofenac and the neutral antibiotic rifampicin) was demonstrated. Thus, the reported tunable properties, self-repair ability, printability and drug release properties, demonstrate the suitability of HA/CHI hydrogels for advanced biomedical applications.

Novel chitosan-ulvan hydrogel reinforcement by cellulose nanocrystals with epidermal growth factor for enhanced wound healing: In vitro and in vivo analysis

Several dressing materials can be used efficiently in recent times, both in their natural and synthetic combinations like; microfibers, film, nanofibers, hydrogels, and various drugs. The specific characteristics, such as biocompatibility and providing a favorable environment for wound healing, make many polysaccharides pivotal as wound dressings. Keeping in view the importance of these polysaccharides, we have developed novel chitosan-ulvan hydrogel incorporated by cellulose nanocrystals (CNCs) loading epidermal growth factor (EGF) drug (CS-U-CNC-EGF) by the freeze-dried process. The morphological features of novel hydrogel were perceived by FTIR, XRD, FESEM, and DSC analysis. The incorporation of the nanocrystals content modified the porous microstructure at pore size from 237 ± 59 μm to 53 ± 16 μm, improved mechanical stress curve from 0.57 MPa to 1.2 MPa, thermal and swelling behavior. The novel nanocomposites revealed non-toxic behavior and excellent cell proliferation. Whereas hydrogel showed sustained release of the epidermal growth factor (EGF), thereby enhancing EGF delivery at the wound site for 15 days from a 100% wound contraction treated group. Moreover, the controlled release of EGF from CS-U-CNC-EGF hydrogels showed significantly faster-wound healing efficiency concerning considerably faster granulations tissue formation and collagen deposition. The study's results point to possible future applications of this composite hydrogel in wound healing as a wound dressing material.

Enhanced Mechanical Properties by Ionomeric Complexation in Interpenetrating Network Hydrogels of Hydrolyzed Poly (N-vinyl Formamide) and Polyacrylamide

Tough hydrogels were made by hydrolysis of a neutral interpenetrating network (IPN) of poly (N-vinyl formamide) PNVF and polyacrylamide (PAAm) networks to form an IPN of polyvinylamine (PVAm) and poly (acrylic acid) (PAAc) capable of intermolecular ionic complexation. Single network (SN) PAAm and SN PNVF have similar chemical structures, parameters and physical properties. The hypothesis was that starting with neutral IPN networks of isomeric monomers that hydrolyze to comparable extents under similar conditions would lead to formation of networks with minimal phase separation and maximize potential for charge-charge interactions of the networks. Sequential IPNs of both PNVF/PAAm and PAAm/PNVF were synthesized and were optically transparent, an indication of homogeneity at submicron length scales. Both IPNs were hydrolyzed in base to form PVAm/PAAc and PAAc/PVAm IPNs. These underwent ~5-fold or greater decrease in swelling at intermediate pH values (3-6), consistent with the hypothesis of intermolecular charge complexation, and as hypothesized, the globally neutral, charge-complexed gel states showed substantial increases in failure properties upon compression, including an order of magnitude increases in toughness when compared to their unhydrolyzed states or the swollen states at high or low pH values. There was no loss of mechanical performance upon repeated compression over 95% strain.

Characterization of interactions between whey protein isolate and hyaluronic acid in aqueous solution: Effects of pH and mixing ratio

Interactions between whey protein isolate (WPI) and hyaluronic acid (HA) were characterized as functions of pH (6.0-1.0) and protein to polysaccharide ratio (R, 1:4-10:1). Intramolecular soluble complexes formed at pH_c of 5.6-5.8, followed by intermolecular insoluble complexes formed at pH_Φ1 of 4.4-4.6. Complexes at ratios below 4:1 reached maximum optical value at pH 2.4 while samples above 4:1 peaked at pH 3-3.4 then precipitated. WPI/HA coacervates completely dissociated into soluble complex at pH 1.6-1.8 (pH_Φ2). WPI/HA mixtures showed shear thinning behavior and elastic property. Whey protein underwent significant α-helix structure change when interacting with HA in range of pH_Φ1>pH > pH_Φ2 and at low R values (1:4 and 1:2). Scanning electronic microscope (SEM) pictures showed pH and mixing ratio dependent microstructural changes corresponding with phase transition. Data may provide helpful information for further application of WPI/HA complexes in medical, food and cosmetic fields.

Injectable Hydrogels: From Laboratory to Industrialization

The transfer of some innovative technologies from the laboratory to industrial scale is many times not taken into account in the design and development of some functional materials such as hydrogels to be applied in the biomedical field. There is a lack of knowledge in the scientific field where many aspects of scaling to an industrial process are ignored, and products cannot reach the market. Injectable hydrogels are a good example that we have used in our research to show the different steps needed to follow to get a product in the market based on them. From synthesis and process validation to characterization techniques used and assays performed to ensure the safety and efficacy of the product, following regulation, several well-defined protocols must be adopted. Therefore, this paper summarized all these aspects due to the lack of knowledge that exists about the industrialization of injectable products with the great importance that it entails, and it is intended to serve as a guide on this area to non-initiated scientists. More concretely, in this work, the characteristics and requirements for the development of injectable hydrogels from the laboratory to industrial scale is presented in terms of (i) synthesis techniques employed to obtain injectable hydrogels with tunable desired properties, (ii) the most common characterization techniques to characterize hydrogels, and (iii) the necessary safety and efficacy assays and protocols to industrialize and commercialize injectable hydrogels from the regulatory point of view. Finally, this review also mentioned and explained a real example of the development of a natural hyaluronic acid hydrogel that reached the market as an injectable product.

Biodegradable polyelectrolyte complexes of chitosan and partially crosslinked dextran phosphate with potential for biomedical applications

Polyelectrolyte complexes (PECs) are spontaneously formed by mixing oppositely charged polyelectrolyte solutions without the use of organic solvents and chemical crosslinkers are great candidate carriers for drug delivery. Herein, biodegradable antimicrobial polyelectrolyte complexes of chitosan - dextran phosphate (DPCS) containing cefazolin were developed and characterized in order to assess their suitability for biomedical applications. For this purpose, the simultaneous partial crosslinking and functionalization of dextran with phosphoric acid in a urea melt under reduced pressure were studied. The functional group content and molecular weight of dextran phosphate were varied in order to establish their influence on gel fraction yield, thermal properties and morphologies of the hydrogels. The stoichiometric PECs of DPCS showed good in vitro biocompatibility, pH sensitivity and biodegradability depending on the hydrogel composition. The release of drug from cefazolin-loaded DPCS hydrogels was through non-Fickian diffusion and displayed long sustained-release time. The drug-loaded hydrogels showed antimicrobial activity against Gram-negative Escherichia coli and Gram-positive Staphylococcus aureus. The tunable degradation behavior under physiological conditions in combination with biocompatibility of the pristine DPCS and high antibacterial efficacy drug-loaded hydrogels may render the presented materials interesting for biomedical applications.

Composite inclusion complexes containing hyaluronic acid/chitosan nanosystems for dual responsive enrofloxacin release

In order to overcome treatment difficulty of S. aureus infections, a pH/hyaluronidase dual responsive enrofloxacin-cyclodextrin (β-CD) inclusion complexes (IC) containing hyaluronic acid/chitosan (HA/CS) self-assemble composite nanosystems covered by poloxamer 188 (F68) was firstly explored for targeted "on-demand" delivery. The FTIR, DSC and PXRD showed that enrofloxacin was embedded into IC and then distributed into F68 coating nanogels formulated by electrostatic interaction between CS and HA. The optimal nanosystems of 118.8 ± 30.7 nm showed excellent stability and responsive release in the acid medium, hyaluronidase containing medium, and LB broth medium where S. aureus present. The nanosystems displayed strong surface adsorption on S. aureus and enhanced activity against S. aureus. It had stronger sustained release than the polymeric nanoparticles formulated by entrapping of IC into F68 and the single HA/CS nanogels. This study provides a promising multi-functionalized nanosystems to overcome the treatment challenge of S. aureus and other bacterial infections.

Polysaccharide-Based In Situ Self-Healing Hydrogels for Tissue Engineering Applications

In situ hydrogels have attracted increasing interest in recent years due to the need to develop effective and practical implantable platforms. Traditional hydrogels require surgical interventions to be implanted and are far from providing personalized medicine applications. However, in situ hydrogels offer a wide variety of advantages, such as a non-invasive nature due to their localized action or the ability to perfectly adapt to the place to be replaced regardless the size, shape or irregularities. In recent years, research has particularly focused on in situ hydrogels based on natural polysaccharides due to their promising properties such as biocompatibility, biodegradability and their ability to self-repair. This last property inspired in nature gives them the possibility of maintaining their integrity even after damage, owing to specific physical interactions or dynamic covalent bonds that provide reversible linkages. In this review, the different self-healing mechanisms, as well as the latest research on in situ self-healing hydrogels, is presented, together with the potential applications of these materials in tissue regeneration.

Preparation of chitosan/hydrolyzed collagen/hyaluronic acid based hydrogel composite with caffeic acid addition

In this work, biopolymer hydrogels were synthesized by mixing hyaluronic acid, hydrolyzed collagen, and chitosan through a solvent evaporation method and incorporating them with caffeic acid as an antioxidant agent. The obtained caffeic acid-loaded chitosan/hydrolyzed collagen/hyaluronic acid hydrogels were characterized by X-ray diffraction, differential scanning calorimetry and thermogravimetric analysis. No significant change on structural and thermal properties was observed. Furthermore, scanning electron microscope reported that the surface morphology of the hydrogels was smooth, and no significant change in porosity was observed after the addition of hyaluronic acid. With high amount of hyaluronic acid, the swelling behaviour was superiority. The hydrogels showed an initial burst release of caffeic acid (~70%) within 60 min, followed by a gradual release of up to 80% by 480 min. The release was slightly higher with the presence of hyaluronic acid. In addition, DPPH, ABTS⁺, and FRAP assays revealed that the caffeic acid-loaded hyaluronic acid/hydrolyzed collagen/chitosan hydrogels exhibited antioxidant activity. Thus, these composites could potentially be used as dressing materials with antioxidant activity.