The influence of elastomeric polyurethane type and ratio on the physicochemical properties of electrospun polyurethane/silk fibroin hybrid nanofibers as potential scaffolds for soft and hard tissue engineering

Electrospinning of Potential Medical Devices (Wound Dressings, Tissue Engineering Scaffolds, Face Masks) and Their Regulatory Approach

Electrospinning is the simplest and most widely used technology for producing ultra-thin fibers. During electrospinning, the high voltage causes a thin jet to be launched from the liquid polymer and then deposited onto the grounded collector. Depending on the type of the fluid, solution and melt electrospinning are distinguished. The morphology and physicochemical properties of the produced fibers depend on many factors, which can be categorized into three groups: process parameters, material properties, and ambient parameters. In the biomedical field, electrospun nanofibers have a wide variety of applications ranging from medication delivery systems to tissue engineering scaffolds and soft electronics. Many of these showed promising results for potential use as medical devices in the future. Medical devices are used to cure, prevent, or diagnose diseases without the presence of any active pharmaceutical ingredients. The regulation of conventional medical devices is strict and carefully controlled; however, it is not yet properly defined in the case of nanotechnology-made devices. This review is divided into two parts. The first part provides an overview on electrospinning through several examples, while the second part focuses on developments in the field of electrospun medical devices. Additionally, the relevant regulatory framework is summarized at the end of this paper.

Protein by-products: Composition, extraction, and biomedical applications

Significant upsurge in animal by-products such as skin, bones, wool, hides, feathers, and fats has become a global challenge and, if not properly disposed of, can spread contamination and viral diseases. Animal by-products are rich in proteins, which can be used as nutritional, pharmacologically functional ingredients, and biomedical materials. Therefore, recycling these abundant and renewable by-products and extracting high value-added components from them is a sustainable approach to reclaim animal by-products while addressing scarce landfill resources. This article appraises the most recent studies conducted in the last five years on animal-derived proteins' separation and biomedical application. The effort encompasses an introduction about the composition, an overview of the extraction and purification methods, and the broad range of biomedical applications of these ensuing proteins.

Small-diameter polyurethane vascular graft with high strength and excellent compliance

In this study, a polyurethane vascular graft with excellent strength and compliance for clinical application was designed and fabricated by preparing three small-diameter vascular graft layers via the textile techniques of wet spinning and knitting. The polyurethane filament that was fabricated by wet spinning formed the inner layer. The polyurethane tubular fabric was used as the middle layer. The outer layer was prepared by spraying polyurethane solution. The three layers of the polyurethane vascular graft have uniform wall thickness, high strength, excellent compliance, and good puncture resistance compared with clinical poly(ethylene terephthalate) (PET) and expanded polytetrafluoroethylene (ePTFE) vascular graft. Therefore, these layers can have potential clinical applications in the replacement of the conventional artificial vascular graft prepared from PET and ePTFE.

Fabrication of a High-Toughness Polyurethane/Fibroin Composite without Interfacial Treatment and Its Toughening Mechanism

Controlling the assembly modes of polymer chains and the interfacial interactions between the filler and polymer matrix is vital for improving the mechanical properties of the composites. Herein, we report an approach for significantly enhancing the toughness of unmodified silk fibroin (SF) powder from silk waste-incorporated polyurethane (PU) composite films via nonsolvent-induced phase separation (NIPS) using binary solvents. The incorporation of 50 wt % SF into the PU3 film (NIPS, binary solvents) resulted in a toughness value of 54.9 ± 0.4 MJ·m^-3, exhibiting 1670.9 and 6000.0% increments compared to those of PU1-50% SF (NIPS, one solvent) and PU2-50% SF (solvent evaporation, one solvent), respectively. The toughness enhancement in the PU3-50% SF composite film benefits from the good interfacial interaction between SF and PU and the unique structure of the compacted "fishing net" with reinforced connections, which can transfer stress under loading effectively. Furthermore, the PU-SF composites with good mechanical properties may have potential applications in silklike fibers and biomimetic materials.