Preparation of novel chitosan derivative nanofibers for prevention of breast cancer recurrence

Thin-film solid-phase microextraction of pesticides from cereal samples using electrospun polyvinyl alcohol/modified chitosan/porous organic framework nanofibers

In this study, a coating of electrospun polyvinyl alcohol/modified chitosan/hydroxy-containing porous organic framework (PVA/MCS/HC-POF) was fabricated and applied as a novel sorbent for thin-film solid-phase microextraction of pesticides from cereal samples, followed by HPLC-UV. The successful fabrication of PVA/MCS/HC-POF was confirmed through characterization tests. The functional group of MCS and a large number of hydroxyl groups on the HC-POF structure contributed to the co-extraction of pesticides. Under the optimum conditions, the calibration plots were linear within the range of 5.0-800 ng mL-1 (r2 ≥ 0.978), and the limits of detection were obtained below 4.0 ng mL-1. The method's precision was investigated through intra-day, inter-day, and film-to-film RSD (%) measurements, all of which were less than 6.5 %, 8.2 %, and 10.0 %, respectively. Furthermore, satisfactory recoveries ranging from 63.3 % to 79.0 % were obtained. Accordingly, the proposed method can be considered a suitable alternative for measuring trace amounts of pesticides in cereal samples.

Chitosan-based nanofibrous scaffolds for biomedical and pharmaceutical applications: A comprehensive review

Nowadays, there is a wide range of deficiencies in treatment of diseases. These limitations are correlated with the inefficient ability of current modalities in the prognosis, diagnosis, and treatment of diseases. Therefore, there is a fundamental need for the development of novel approaches to overcome the mentioned restrictions. Chitosan (CS) nanoparticles, with remarkable physicochemical and mechanical properties, are FDA-approved biomaterials with potential biomedical aspects, like serum stability, biocompatibility, biodegradability, mucoadhesivity, non-immunogenicity, anti-inflammatory, desirable pharmacokinetics and pharmacodynamics, etc. CS-based materials are mentioned as ideal bioactive materials for fabricating nanofibrous scaffolds. Sustained and controlled drug release and in situ gelation are other potential advantages of these scaffolds. This review highlights the latest advances in the fabrication of innovative CS-based nanofibrous scaffolds as potential bioactive materials in regenerative medicine and drug delivery systems, with an outlook on their future applications.

Recent Biomaterial-Assisted Approaches for Immunotherapeutic Inhibition of Cancer Recurrence

Biomaterials possess distinctive properties, notably their ability to encapsulate active biological products while providing biocompatible support. The immune system plays a vital role in preventing cancer recurrence, and there is considerable demand for an effective strategy to prevent cancer recurrence, necessitating effective strategies to address this concern. This review elucidates crucial cellular signaling pathways in cancer recurrence. Furthermore, it underscores the potential of biomaterial-based tools in averting or inhibiting cancer recurrence by modulating the immune system. Diverse biomaterials, including hydrogels, particles, films, microneedles, etc., exhibit promising capabilities in mitigating cancer recurrence. These materials are compelling candidates for cancer immunotherapy, offering in situ immunostimulatory activity through transdermal, implantable, and injectable devices. They function by reshaping the tumor microenvironment and impeding tumor growth by reducing immunosuppression. Biomaterials facilitate alterations in biodistribution, release kinetics, and colocalization of immunostimulatory agents, enhancing the safety and efficacy of therapy. Additionally, how the method addresses the limitations of other therapeutic approaches is discussed.

Structural and conformational changes on chitosan after green heterogeneous synthesis of phenyl derivatives

Four aromatic acid compounds: benzoic acid (Bz), 4-hydroxyphenylpropionic acid (HPPA), gallic acid (GA) and 4-aminobenzoic acid (PABA) were covalently bonded to chitosan in order to improve water solubility at neutral pH. The synthesis was performed via a radical redox reaction in heterogeneous phase by employing ascorbic acid and hydrogen peroxide (AA/H₂O₂) as radical initiators in ethanol. The analysis of chemical structure and conformational changes on acetylated chitosan was also the focus of this research. Grafted samples exhibited as high as 0.46 M degree of substitution (MS) and excellent solubility in water at neutral pH. Results showed a correlation between the disruption of C3-C5 (O3…O5) hydrogen bonds with increasing solubility in grafted samples. Spectroscopic techniques such as FT-IR and ¹H and ¹³C NMR showed modifications in both glucosamine and N-Acetyl-glucosamine units by ester and amide linkage at C2, C3 and C6 position, respectively. Finally, loss of crystalline structure of 2-helical conformation of chitosan after grafting was observed by XRD and correlated with ¹³C CP-MAS-NMR analyses.

Curcumin Nanofibers: A Novel Approach to Enhance the Anticancer Potential and Bioavailability of Curcuminoids

Development of novel treatment methods for cancer is needed given the limitations of current treatment methods, including side effects and chemotherapeutic resistance, which may provide new hope to cancer patients. Cancer is the second leading cause of global mortality. Curcumin, the active ingredient of turmeric, has been used since ancient times for various therapeutic purposes. Several studies have identified its activity against cancer. Despite the established anticancer activity of curcumin, its low aqueous solubility and bioavailability are barriers to its effectiveness. In an attempt to solve this problem, many studies have formulated curcumin nanofiber preparations using a variety of methods. Electrospinning is a simple and affordable method for the production of nanofibers. Studies have shown increased curcumin bioavailability in nanofibers resulting from their high surface/volume ratio and porosity. We have undertaken a detailed review of studies on the anticancer effects of curcumin nanofibers. Curcumin acts by inhibiting various biological cancer pathways, including NF-κB, mTOR, complex I, cytokines, expression of p-p65, Ki67, and angiogenesis-associated genes. It also induces apoptosis through activation of caspase pathways and ROS production in cancer cells. Curcumin-loaded PLA50/PVP50/Cur15 nanofibers were investigated in breast cancer, one of the most studied cancers, and was shown to have significant effects on the widely used HeLa-cell line. Most of the studies undertaken have been performed in cell lines in vitro, while relatively few animal studies have been reported. More preclinical and clinical studies are needed to evaluate the anticancer activity of curcumin nanofibers. Amongst studies undertaken, a variety of curcumin nanofibers of various formulations have been shown to suppress a variety of cancer types. Overall, curcumin nanofibers have been found to be more efficient than free curcumin. Thus, curcumin nanofibers have been observed to improvise cancer treatment, offering great potential for effective cancer management. Further studies, both in vitro and in vivo, involving curcumin nanofibers have the potential to benefit cancer management.

Tumor microenvironment penetrating chitosan nanoparticles for elimination of cancer relapse and minimal residual disease

Chitosan and its derivatives are among biomaterials with numerous medical applications, especially in cancer. Chitosan is amenable to forming innumerable shapes such as micelles, niosomes, hydrogels, nanoparticles, and scaffolds, among others. Chitosan derivatives can also bring unprecedented potential to cross numerous biological barriers. Combined with other biomaterials, hybrid and multitasking chitosan-based systems can be realized for many applications. These include controlled drug release, targeted drug delivery, post-surgery implants (immunovaccines), theranostics, biosensing of tumor-derived circulating materials, multimodal systems, and combination therapy platforms with the potential to eliminate bulk tumors as well as lingering tumor cells to treat minimal residual disease (MRD) and recurrent cancer. We first introduce different formats, derivatives, and properties of chitosan. Next, given the barriers to therapeutic efficacy in solid tumors, we review advanced formulations of chitosan modules as efficient drug delivery systems to overcome tumor heterogeneity, multi-drug resistance, MRD, and metastasis. Finally, we discuss chitosan NPs for clinical translation and treatment of recurrent cancer and their future perspective.

Advancement of Nanofibrous Mats and Common Useful Drug Delivery Applications

Electrospinning enables simple and cost-effective production of polymer nanofibers from different polymer materials. Drug delivery systems are capable of achieving maximum drug treatment benefits by significantly reducing adverse complications. Electrospun nanofibers have recently attracted considerable attention owing to their distinctive properties, including flexibility and biocompatibility. The implementation of functional constituents within nanostructure fibers blends is an effective technique for the administration of a variety of drugs in animal research, broadening the nanofiber capability and reliability. The nanofibrous mesh and its various application purposes are discussed in terms of a summary of recent research, emphasizing the ease of streaming and a large number of combinations of this approach, which could lead to a breakthrough in targeted therapy.

Novel Chitosan Derivatives and Their Multifaceted Biological Applications

Chitosan is a rather attractive material, especially because of its bio-origins as well as generation from exoskeletal waste. As the mantle has been effectively transferred from chitin to chitosan, so has it been extrapolated to in-house synthesized novel chitosan derivatives. This review comprehensively lists the available novel chitosan derivatives (ChDs) and summarizes their biological applications. The fact that chitosan derivatives do comprise multifaceted biological applications is attested by the voluminous reports on their varied contributions. However, this review points out to the fact that there has been selective focus on bio functions such as antifungal, antioxidant, antibacterial, whereas other biomedical applications and antiviral applications remain relatively less explored. With their current functionality record, there is definitely no doubt that the plethora of synthesized ChDs will have a profound impact on the unexplored biological aspects. This review points out this lacuna as room for future exploration.

Spontaneous Formation of 3D Breast Cancer Tissues on Electrospun Chitosan/Poly(ethylene oxide) Nanofibrous Scaffolds

Three-dimensional (3D) tissue culture has attracted a great deal of attention as a result of the need to replace the conventional two-dimensional cell cultures with more meaningful methods, especially for understanding the sophisticated nature of native tumor microenvironments. However, most techniques for 3D tissue culture are laborious, expensive, and limited to spheroid formation. In this study, a low-cost and highly effective nanofibrous scaffold is presented for spontaneous formation of reproducible 3D breast cancer microtissues. Experimentally, aligned and non-aligned chitosan/poly(ethylene oxide) nanofibrous scaffolds were prepared at one of two chitosan concentrations (2 and 4 wt %) and various electrospinning parameters. The resulting fabricated scaffolds (C2P1 and C4P1) were structurally and morphologically characterized, as well as analyzed in silico. The obtained data suggest that the fiber diameter, surface roughness, and scaffold wettability are tunable and can be influenced based on the chitosan concentration, electrospinning conditions, and alignment mode. To test the usefulness of the fabricated scaffolds for 3D cell culture, a breast cancer cell line (MCF-7) was cultured on their surfaces and evaluated morphologically and biochemically. The obtained data showed a higher proliferation rate for cells grown on scaffolds compared to cells grown on two-dimensional adherent plates (tissue culture plate). The MTT assay revealed that the rate of cell proliferation on nanofibrous scaffolds is statistically significantly higher compared to tissue culture plate (P ≤ 0.001) after 14 days of culture. The formation of spheroids within the first few days of culture shows that the scaffolds effectively support 3D tissue culture from the outset of the experiment. Furthermore, 3D breast cancer tissues were spontaneously formed within 10 days of culture on aligned and non-aligned nanofibrous scaffolds, which suggests that the scaffolds imitate the in vivo extracellular matrix in the tumor microenvironment. Detailed mechanisms for the spontaneous formation of the 3D microtissues have been proposed. Our results suggest that scaffold surface topography significantly influences tissue formation and behavior of the cells.

Electrospinning: New Strategies for the Treatment of Skin Melanoma

Recent studies have shown a significant growth of skin cancer cases in northern regions of the world, in which its presence was not common. Skin cancer is one of the cancers that mostly affects the world's population, ranking fifth in studies conducted in the United States (USA). Melanoma is cancer that has the highest number of deaths worldwide since it is the most resistant skin cancer to current treatments. This is why alternatives for its treatment has been investigated considering nanomedicine concepts. This study approaches the role of this field in the creation of promising electrospun devices, composed of nanoparticles and nanofibers, among other structures, capable of directing and/or loading active drugs and/or materials with the objective of inhibiting the growth of melanoma cells or even eliminating those cells.

Nanofibrous drug delivery systems for breast cancer: a review

Breast cancer is the most common type of cancer among women. Breast-conserving surgery (BCS) is one of the preferred approaches for treating non-invasive or early-stage breast cancers. However, local-regional recurrence (LRR) is one of the critical risk factors after BCS. As many as 10%-20% of BCS cases may show LRR within 5 years and almost 50% within 10 years after surgery. Radiation therapy is one of the preferred treatments used to prevent LRR after BCS. However, because of possible side-effects of radiation therapy, targeted drug delivery systems (DDS) based on nanofibers loaded with anti-cancer drugs have been explored in recent years to control LRR. This paper aims to review different polymers and anti-cancer drugs used for developing nanofibrous DDS against various breast cancer cell lines for their efficacy and advantages. It was observed that the utilization of nanofibers scaffolds after mastectomy could decrease the recurrence of breast cancer cells to a great extent as these nanofibrous scaffolds release drugs in a sustained manner for a prolonged time eliminating the need for radiations. Besides, the side effects of chemotherapy or other aggressive anticancer treatment on healthy cells could also be avoided.

Platelet-rich fibrin-loaded PCL/chitosan core-shell fibers scaffold for enhanced osteogenic differentiation of mesenchymal stem cells

Here, we fabricated the platelet-rich fibrin (PRF)-loaded PCL/chitosan (PCL/CS-PRF) core-shell nanofibrous scaffold through a coaxial electrospinning method. Our goal was to evaluate the effect of CS-RPF in the core layer of the nanofibrous on the osteogenic differentiation of human mesenchymal stem cells (HMSCs). The elastic modulus of PCL/CS-PRF core-shell scaffold (44 MPa) was about 1.5-fold of PCL/CS scaffold (25 MPa). The specific surface area of the scaffolds increased from 9.98 m²/g for PCL/CS scaffold to 16.66 m²/g for the PCL/CS-PRF core-shell nanofibrous scaffold. Moreover, the release rate of PRF from PCL/CS-PRF nanofibrous scaffold was measured to be 24.50% after 10 days which showed slow and sustained release of PRF from the nanofibrous. The formation of Ca-P on the surface of scaffold immersed in simulated body fluid solution indicated the suitable osteoconductivity of PCL/CS-PRF core-shell nanofibrous scaffold. Also, the value of ALP activity and calcium deposited on the surface of PCL/CS-PRF core-shell nanofibrous scaffold were 81.97 U/L and 40.33 μg/scaffold, respectively after 14 days, which confirmed the significantly higher amounts of ALP and calcium deposition on the scaffold containing PRF compared to PCL/CS scaffold. Due to higher hydrophilicity and porosity of PCL/CS-PRF core-shell nanofibrous scaffold compared to PCL/CS scaffold, a better bone cell growth on surface of PCL/CS-PRF scaffold was observed. The Alizarin red-positive area was significantly higher on PCL/CS-PRF scaffold compared to PCL/CS scaffold, indicating more calcium deposition and osteogenic differentiation of HMSCs in the presence of PRF. Our findings demonstrate that PCL/CS-PRF core-shell scaffolds can provide a strong construct with improved osteogenic for bone tissue engineering applications.

Electrospinning for drug delivery applications: A review

Drug delivery devices are promising tools in the pharmaceutical field, as they are able to maximize the therapeutic effects of the delivered drug while minimizing the undesired side effects. In the past years, electrospun nanofibers attracted rising attention due to their unique features, like biocompatibility and broad flexibility. Incorporation of active principles in nanofibrous meshes proved to be an efficient method for in situ delivery of a wide range of drugs, expanding the possibility and applicability of those devices. In this review, the principle of electrospinning and different fields of applications are treated to give an overview of the recent literature, underlining the easy tuning and endless combination of this technique, that in the future could be the new frontier of personalized medicine.

Prospects and challenges of anticancer agents' delivery via chitosan-based drug carriers to combat breast cancer: a review

Breast cancer (BC) is considered as one the most prevalent cancers worldwide. Due to its high resistance to chemotherapy and high probability of metastasis, BC is one of the leading causes of cancer-related deaths. The controlled release of chemotherapy drugs to the precise site of the tumor tissue will increase the therapeutic efficacy and decrease side effects of systemic administration. Among various drug delivery systems, natural polymers-based drug carriers have gained significant attention for cancer therapy. Chitosan, a natural polymer obtained by de-acetylation of chitin, holds huge potential for drug delivery applications because chitosan is non-toxic, non-immunogenic, biocompatible, chemically modifiable, and can be processed to form various formulations. In the current review, we will discuss the prospects and challenges of chitosan-based drug delivery systems in treating BC.

Recent Advances in Marine-Based Nutraceuticals and Their Health Benefits

The oceans have been the Earth's most valuable source of food. They have now also become a valuable and versatile source of bioactive compounds. The significance of marine organisms as a natural source of new substances that may contribute to the food sector and the overall health of humans are expanding. This review is an update on the recent studies of functional seafood compounds (chitin and chitosan, pigments from algae, fish lipids and omega-3 fatty acids, essential amino acids and bioactive proteins/peptides, polysaccharides, phenolic compounds, and minerals) focusing on their potential use as nutraceuticals and health benefits.

Simultaneous linear release of folic acid and doxorubicin from ethyl cellulose/chitosan/g-C3 N4 /MoS2 core-shell nanofibers and its anticancer properties

The folic acid (FA) and doxorubicin (DOX) have been doped into the g-C₃ N₄ /MoS₂ incorporated-chitosan/ethyl cellulose (EC) core-shell nanofibers for targeted delivery of FA and DOX against HeLa and MCF-7 cell lines. The g-C₃ N₄ /MoS₂ nanosheets and core-shell nanofibers were characterized using Fourier transform infrared spectroscopy, X-ray diffraction, scanning electron microscopy, transmission electron microscopy, and UV-Vis tests. The drug loading factor, the degradation rate, and the DOX and FA release behavior from core-shell nanofibers have been investigated. The pharmacokinetic results revealed the linear release with non-Fickian diffusion of the both anticancer drugs from nanofibers during 7 days. The DAPI staining and MTT assays of the nanofibers immersed in MCF-7 and HeLa cell lines were studied to determine the potential of DOX and FA doped-core-shell nanofibrous matrix for MCF-7 and HeLa cells death in vitro. The maximum MCF-7 and HeLa cells death percentages were found to be 89 and 85%, respectively, using EC/chitosan/g-C₃ N₄ /MoS₂ /DOX/FA core-shell nanofibers after 7 days. The high activity of g-C₃ N₄ /MoS₂ /DOX/FA loaded-core-shell nanofibers for studied cancer cells killing was achieved.

Synthesis and Characterization of N,N,N-trimethyl-O-(ureidopyridinium)acetyl Chitosan Derivatives with Antioxidant and Antifungal Activities

Chitosan is an active biopolymer, and the combination of it with other active groups can be a valuable method to improve the potential application of the resultant derivatives in food, cosmetics, packaging materials, and other industries. In this paper, a series of N,N,N-trimethyl-O-(ureidopyridinium)acetyl chitosan derivatives were synthesized. The combination of chitosan with ureidopyridinium group and quaternary ammonium group made it achieve developed water solubility and biological properties. The structures of chitosan and chitosan derivatives were confirmed by FTIR, ¹H NMR spectra, and elemental analysis. The prepared chitosan derivatives were evaluated for antioxidant property by 1,1-diphenyl-2-picrylhydrazyl (DPPH) radical scavenging ability, hydroxyl radical scavenging ability, and superoxide radical scavenging ability. The results revealed that the synthesized chitosan derivatives exhibited improved antioxidant activity compared with chitosan. The chitosan derivatives were also investigated for antifungal activity against Phomopsis asparagus as well as Botrytis cinerea, and they showed a significant inhibitory effect on the selected phytopathogen. Meanwhile, CCK-8 assay was used to test the cytotoxicity of chitosan derivatives, and the results showed that most derivatives had low toxicity. These data suggested to develop analogs of chitosan derivatives containing ureidopyridinium group and quaternary ammonium group, which will provide a new kind of promising biomaterials having decreased cytotoxicity as well as excellent antioxidant and antimicrobial activity.