Fast dissolving nanofibrous matrices prepared by electrospinning of polyaspartamides

Electrospun polysuccinimide scaffolds containing different salts as potential wound dressing material

In this research, we applied electrospinning to create a two-component biodegradable polymeric scaffold containing polysuccinimide (PSI) and antibacterial salts. Antibacterial agents for therapeutical purposes mostly contain silver ions which are associated with high environmental impact and, in some cases, may cause undesired immune reactions. In our work, we prepared nanofibrous systems containing antibacterial and tissue-regenerating salts of zinc acetate or strontium nitrate in different concentrations, whose structures may be suitable for developing biomedical wound dressing systems in the future. Several experiments have been conducted to optimize the physicochemical, mechanical, and biological properties of the scaffolds developed for application as wound dressings. The scaffold systems obtained by PSI synthesis, salt addition, and fiber formation were first investigated by scanning electron microscopy. In almost all cases, different salts caused a decrease in the fiber diameter of PSI polymer-based systems (<500 nm). Fourier-transform infrared spectroscopy was applied to verify the presence of salts in the scaffolds and to determine the interaction between the salt and the polymer. Another analysis, energy-dispersive X-ray spectroscopy, was carried out to determine strontium and zinc atoms in the scaffolds. Our result showed that the salts influence the mechanical properties of the polymer scaffold, both in terms of specific load capacity and relative elongation values. According to the dissolution experiments, the whole amount of strontium nitrate was dissolved from the scaffold in 8 h; however, only 50% of the zinc acetate was dissolved. In addition, antibacterial activity tests were performed with four different bacterial strains relevant to skin surface injuries, leading to the appearance of inhibition zones around the scaffold discs in most cases. We also investigated the potential cytotoxicity of the scaffolds on human tumorous and healthy cells. Except for the ones containing zinc acetate salt, the scaffolds are not cytotoxic to either tumor or healthy cells.

In situ gelation of thiolated poly(aspartic acid) derivatives through oxidant-free disulfide formation for ophthalmic drug delivery

Efficient topical treatment of ocular diseases requires a prolonged residence time of drug formulations. An in situ gelling, mucoadhesive system can provide improved residence time while keeps the installation of the formulation easy and accurate due to its low initial viscosity. We synthesized a two-component, biocompatible water-based liquid formulation showing in situ gelation upon mixing. S-protected, preactivated derivatives of thiolated poly(aspartic acid) (PASP-SS-MNA) were synthesized by coupling the free thiol groups of thiolated poly(aspartic acid) (PASP-SH) with 6-mercaptonicotinic acid (MNA). The amount of protecting groups was 242, 341, and 530 µmol/g depending on the degree of thiolation of PASP. The chemical interaction between PASP-SS-MNA and mucin was proven, indicating the mucoadhesive properties. Disulfide cross-linked hydrogels were formed in situ without an oxidizing agent by mixing the aqueous solutions of PASP-SS-MNA and PASP-SH. The gelation time was controlled between 1 and 6 min, while the storage modulus was as high as 4-16 kPa depending on the composition. Swelling experiments showed that hydrogels with no residual thiol groups are stable in phosphate-buffered saline at pH = 7.4. In contrast, the presence of free thiol groups leads to the dissolution of the hydrogel with a rate depending on the excess of thiol groups. The biological safety of the polymers and MNA was confirmed on Madin-Darby Canine Kidney cell line. Furthermore, a prolonged release of ofloxacin was observed at pH = 7.4 compared to a conventional liquid formulation, supporting the potential of the developed biopolymers in ophthalmic drug delivery.

A Review on Electrospun Poly(amino acid) Nanofibers and Their Applications of Hemostasis and Wound Healing

The timely and effective control and repair of wound bleeding is a key research issue all over the world. From traditional compression hemostasis to a variety of new hemostatic methods, people have a more comprehensive understanding of the hemostatic mechanism and the structure and function of different types of wound dressings. Electrospun nanofibers stand out with nano size, high specific surface area, higher porosity, and a variety of complex structures. They are high-quality materials that can effectively promote wound hemostasis and wound healing because they can imitate the structural characteristics of the skin extracellular matrix (ECM) and support cell adhesion and angiogenesis. At the same time, combined with amino acid polymers with good biocompatibility not only has high compatibility with the human body but can also be combined with a variety of drugs to further improve the effect of wound hemostatic dressing. This paper summarizes the application of different amino acid electrospun wound dressings, analyzes the characteristics of different materials in preparation and application, and looks forward to the development of directions of poly(amino acid) electrospun dressings in hemostasis.

Synthesis, complex formation and corneal permeation of cyclodextrin-modified, thiolated poly(aspartic acid) as self-gelling formulation of dexamethasone

The present study aimed at developing a potential in situ gellable dexamethasone (DXM) eye drop. Poly(aspartic acid) (PASP) derivatives were synthesized with dual functionality to improve the solubility of DXM, and to achieve in situ gelation. First, amine-modified β-cyclodextrin (CD) was attached to polysuccinimide (PSI), second, thiol functionalities were added by the reaction of cysteamine and succinimide rings. Finally, the PSI derivatives were hydrolysed to the corresponding PASP derivatives to get water-soluble polymers. Phase-solubility studies confirmed the complexation ability of CD-containing PASP derivatives. In situ gelation and the effect of the CD immobilization on this behaviour were characterized by rheological measurements. The solubilizing effect of CD was confirmed by kinetic solubility measurements, whereas in vitro corneal permeability assay (corneal-PAMPA) measurements were performed to determine in vitro permeability and flux values. The effect of the PASP derivatives on permeation strongly depended on chemical composition and polymer concentration.

Electrospun Nanofibers: Current Progress and Applications in Food Systems

Electrospinning has the advantages of simple manufacturing equipment, a low spinning cost, wide range of spinnable materials, and a controllable mild process, which can continuously fabricate submicron or nanoscale ultrafine polymer fibers without high temperature or high pressure. The obtained nanofibrous films may have a large specific surface area, unique pore structure, and easy-to-modify surface characteristics. This review briefly introduces the types and fiber structures of electrospinning and summarizes the applications of electrospinning for food production (e.g., delivery systems for functional food, filtration of beverages), food packaging (e.g., intelligent packaging, antibacterial packaging, antioxidant packaging), and food analysis (e.g., pathogen detection, antibiotic detection, pesticide residue detection, food compositions analysis), focusing on the advantages of electrospinning applications in food systems. Furthermore, the limitations and future research directions of the technique are discussed.

Thiolated cationic poly(aspartamides) with side group dependent gelation properties for the delivery of anionic polyelectrolytes

In situ gellable polymers have potential applications as injectable formulations in drug delivery and regenerative medicine. Herein, thiolated cationic polyaspartamides were synthesized with two different approaches to correlate side group...

Detecting and targeting neurodegenerative disorders using electrospun nanofibrous matrices: current status and applications

Neurodegeneration is defined as the progressive atrophy and loss of function of neurons; it is present in neurodegenerative disorders such as Multiple Sclerosis, Alzheimer's, Huntington's, and Parkinson's diseases. The detection of such disorders is performed by various imaging modalities while their therapeutic management is quite challenging. Besides, the pathogenesis of neurodegenerative disorders is still under ongoing research due to complex and multi-factorial mechanisms. Currently, targeting the specific proteins responsible for neurodegeneration is of great interest to many researchers. Furthermore, nanotechnology-based approaches for targeting the affected neurons became an emerging field of interest. Nanostructures of various forms have been developed aiming to act as therapeutics for neurodegeneration, in which electrospun nanofibers seem to play an important role as biomedical products for both detection and management of the diseases. Electrospinning is an intriguing method able to produce nanofibers with a wide range of sizes and morphological characteristics. Such nanofibrous matrices can be delivered through different administration routes to target various diseases. In this review, the most recent advancements in electrospun nanofibrous systems that target or detect multiple neurodegenerative diseases have been enlightened and an introduction to the general aspects of neurodegenerative diseases and the electrospinning process has been made. Finally, future perspectives of neurodegeneration targeting were also discussed.

Electrospinning for healthcare: recent advancements

This perspective explores recent developments and innovations in the electrospinning technique and their potential applications in biomedicine.