Kinetic study on the effects of sugar addition on the thermal degradation of phycocyanin from Spirulina sp

Unveiling the impact of additives on structural integrity, thermal and color stability of C-phycocyanin - Agar hydrocolloid

C-Phycocyanin and sugar (C-PC/S) blended agar hydrocolloid was prepared and its rheological, thermo-functional and morphological properties were examined based on the fluorescence excitation-emission matrix profile. Sucrose (40%, w/v) determined as a superior preservative, maintaining the native conformation of C-PC effectively. C-PC/S exhibited enhanced structural integrity with high storage modulus (G') and 86.4% swelling index. FT-IR demonstrated strong intramolecular bonding. TGA revealed that the presence of sucrose prolonged the devolatilization peak up to 325 °C, with a degradation rate of -2.273 mg/min, it the thermal stability. C-PC/S fortified hydrocolloid in ice cream (5.0% w/w), reduced melting rate up to five times. In conclusion, sucrose as a promising enhancer of color stability and structural integrity for C-PC, and this combination effectively improves the functional and rheological properties. Further, the findings exposed the agar hydrocolloid as a potential enhancer of color retention and improved performance for various food and cosmetic products.

Natural pigments in the food industry: Enhancing stability, nutritional benefits, and gut microbiome health

Natural pigments are increasingly favored in the food industry for their vibrant colors, fewer side effects and potential health benefits compared to synthetic pigments. However, their application in food industry is hindered by their instability under harsh environmental conditions. This review evaluates current strategies aimed at enhancing the stability and bioactivity of natural pigments. Advanced physicochemical methods have shown promise in enhancing the stability of natural pigments, enabling their incorporation into food products to enhance sensory attributes, texture, and bioactive properties. Moreover, recent studies demonstrated that most natural pigments offer health benefits. Importantly, they have been found to positively influence gut microbiota, in particular their regulation of the beneficial and harmful flora of the gut microbiome, the reduction of ecological dysbiosis through changes in the composition of the gut microbiome, and the alleviation of systemic inflammation caused by a high-fat diet in mice, suggesting a beneficial role in dietary interventions.

Phycocyanin from microalgae: A comprehensive review covering microalgal culture, phycocyanin sources and stability

As food safety continues to gain prominence, phycocyanin (PC) is increasingly favored by consumers as a natural blue pigment, which is extracted from microalgae and serves the dual function of promoting health and providing coloration. Spirulina-derived PC demonstrates exceptional stability within temperature ranges below 45 °C and under pH conditions between 5.5 and 6.0. However, its application is limited in scenarios involving high-temperature processing due to its sensitivity to heat and light. This comprehensive review provides insights into the efficient production of PC from microalgae, covers the metabolic engineering of microalgae to increase PC yields and discusses various strategies for enhancing its stability in food applications. In addition to the most widely used Spirulina, some red algae and Thermosynechococcus can serve as good source of PC. The genetic and metabolic manipulation of microalgae strains has shown promise in increasing PC yield and improving its quality. Delivery systems including nanoparticles, hydrogels, emulsions, and microcapsules offer a promising solution to protect and extend the shelf life of PC in food products, ensuring its vibrant color and health-promoting properties are preserved. This review highlights the importance of metabolic engineering, multi-omics applications, and innovative delivery systems in unlocking the full potential of this natural blue pigment in the realm of food applications, provides a complete overview of the entire process from production to commercialization of PC, including the extraction and purification.

Exploring the Benefits of Phycocyanin: From Spirulina Cultivation to Its Widespread Applications

Large-scale production of microalgae and their bioactive compounds has steadily increased in response to global demand for natural compounds. Spirulina, in particular, has been used due to its high nutritional value, especially its high protein content. Promising biological functions have been associated with Spirulina extracts, mainly related to its high value added blue pigment, phycocyanin. Phycocyanin is used in several industries such as food, cosmetics, and pharmaceuticals, which increases its market value. Due to the worldwide interest and the need to replace synthetic compounds with natural ones, efforts have been made to optimize large-scale production processes and maintain phycocyanin stability, which is a highly unstable protein. The aim of this review is to update the scientific knowledge on phycocyanin applications and to describe the reported production, extraction, and purification methods, including the main physical and chemical parameters that may affect the purity, recovery, and stability of phycocyanin. By implementing different techniques such as complete cell disruption, extraction at temperatures below 45 °C and a pH of 5.5-6.0, purification through ammonium sulfate, and filtration and chromatography, both the purity and stability of phycocyanin have been significantly improved. Moreover, the use of saccharides, crosslinkers, or natural polymers as preservatives has contributed to the increased market value of phycocyanin.

The Effect of Storage and Pasteurization (Thermal and High-Pressure) Conditions on the Stability of Phycocyanobilin and Phycobiliproteins

The utilization of natural blue pigments in foods is difficult as they are usually unstable during processing and the commonly applied pH. The current study focuses on natural blue pigment, possessing antioxidant properties, found in Arthrospira platensis (spirulina), and phycobiliproteins (PBP). These pigments are a complex of conjugated protein and non-protein components, known as phycocyanobilin. PBP has low stability during pasteurization (high-pressure or heat treatments), resulting in protein denaturation and color deterioration that limits the application. The phycocyanobilin pigment might also be liable to oxidation during pasteurization and storage, resulting in color deterioration. Yet, the instability of the pigment phycocyanobilin during the pasteurization process and storage conditions was never studied before, limiting the comprehensive understanding of the reasons for PBP instability. In this study, the stability of phycocyanobilin under high-pressure and high-temperature conditions was compared to the stability of phycobiliproteins. We revealed that phycobiliproteins have a higher color deterioration rate at 70–80 °C than at high-pressure (300–600 MPa) whereas phycocyanobilin remained stable during high-pressure and heat processing. During storage at pH 7, phycocyanobilin was oxidized, and the oxidation rate increased with increasing pH, while at lower pH phycocyanobilin had low solubility and resulted in aggregation.

CO2 fixation and cultivation of Thermosynechococcus sp. CL-1 for the production of phycocyanin

Cultivation of Cyanobacteria is preferable for CO2 fixation process due to its efficiency and production of beneficial byproducts like phycocyanin. In this study, Thermosynechococcus sp. CL-1 (TCL-1) was cultivated in a 30 L flat panel photobioreactor using a 3-fold-modified Fitzgerald medium with 113.2 mM dissolved inorganic carbon. The highest CO2 fixation rate of 21.98 ± 1.52 mg/L/h was followed by higher lipid content (49.91 % dry weight content or %dwc) than the generated carbohydrate (24.22 %dwc). TCL-1 also potentially produced phycocyanin that was dominated by C-phycocyanin (98.10 ± 6.67 mg/g) along with a lower amount of allophycocyanin and phycoerythrin under extraction using various types of solvent. Stability of phycocyanin extract was further examined during storage under various temperatures and light illuminations. Extraction with 36 % glucose solvent presented a protective effect to phycocyanin from heat and photo-damage which was proven by the kinetics study of phycocyanin degradation in this study.

Phycobiliproteins, the pigment-protein complex form of natural food colorants and bioactive ingredients

Currently, the use of synthetic pigments in foods is restricted since synthetic pigments are proven and suspected to be harmful to human health. Phycobiliproteins (PBPs), existed in phycobilisomes (PBSs) of algae, are a kind of pigment-proteins with intense color. The specific color of PBPs (red and blue) is given by the water-soluble open-chained tetrapyrrole chromophore (phycobilin) that covalently attaches to the apo-protein via thioether linkages to cysteine residues. According to the spectral characteristics of PBPs, they can be categorized as phycoerythrins (PEs), phycocyanins (PCs), allophycocyanins (APCs), and phycoerythrocyanins (PECs). PBPs can be used as natural food colorants, fluorescent substances, and bioactive ingredients in food applications owing to their color characteristics and physiological activities. This paper mainly summarizes the extraction and purification methods of the PBPs and reviews their characteristics and applications. Moreover, the use of several strategies such as additives, microencapsulation, electrospray, and cross-linking to improve the stability and bioavailability of PBPs as well as the future outlooks of PBPs as natural colorants in food commercialization are elucidated.

Phycocyanin from Spirulina platensis bio-mimics quantum dots photocatalytic activity: A novel approach for dye degradation

In our present study, the photocatalytic degradation of malachite green (MG) an organic dye was carried out using a phycocyanin extract of Spirulina platensis under the irradiation of sunlight. The aim of the present study is to incorporate a simple, novel, an eco-friendly, and cost-effective degradation of dyes without using any harmful metals and chemicals. It was observed that 25 ppm of MG dye got degraded nearly to 100 % at 3 h. The UV absorbance studies indicate the absence of a peak at 620 nm which is a conclusive evidence for MG dye degradation. An optimization study of MG dye degradation was evaluated by Response Surface Methodology using Minitab module 20.4.0.0 statistical software and its percentage of degradation was statistically analyzed using analystat. The FT-IR studies of raw spectra show minimal variation; however, the deconvoluted spectra in the region of 1600-1700 cm^-1 indicate the variation in the secondary structure of amide I bands that leads to the dye degradation. The dye degradation study mainly follows the first-order kinetics between the time intervals of 60-180 min. The characteristics of degraded water were assessed by a TOC analyzer. The value of total inorganic carbon (TIC) in MG before treatment was 90 mg/L and seems to be slightly high when compared to MG after treatment which was found to be 87.65 mg/L and the adsorbent-treated water with a low value of 54.25 mg/L. These results well matched with the characteristics of normal water. The presence of phycocyanin in the degraded water was effectively removed by treating with activated carbon and it was confirmed with fluorescence analysis. These results support that the MG dye degradation was exhibited by phycocyanin extract and bio-mimics the quantum dot photocatalytic activity.

Improving the Thermal and Oxidative Stability of Food-Grade Phycocyanin from Arthrospira platensis by Addition of Saccharides and Sugar Alcohols

The water-soluble pigment protein phycocyanin (C-PC) from cyanobacteria Arthrospira sp. is an excellent natural food colorant and nutritional supplement with a brilliant blue color. However, C-PC is highly unstable, especially at high temperatures and when exposed to oxidative stress. The lack of simple and economical methods for improving the stability of C-PC greatly limits the application of this functional protein in the food industry. This study investigated the effect of adding saccharides (glucose, mannose, galactose, and maltose) and sugar alcohols (mannitol and maltitol) on the stability of food-grade C-PC extracted from Arthrospira platensis; the relevant reaction kinetics were also analyzed. The results revealed that glucose, mannose, mannitol, galactose, and maltose could effectively improve the thermal stability of C-PC. This improvement was positively correlated with the concentration of the additives and decreased sharply when the temperature exceeded 60 °C. Furthermore, the results also revealed the instability of C-PC when subjected to oxidative stress and the effectiveness of glucose, mannose, mannitol, and maltose in preventing the oxidative degradation of C-PC. In general, this study demonstrates that glucose, mannose, mannitol, and maltose are promising compounds for promoting the thermal and oxidative stability of C-PC, providing an economical and effective method for C-PC preservation.

Cyano-Phycocyanin: Mechanisms of Action on Human Skin and Future Perspectives in Medicine

Cyano-phycocyanin is one of the active pigments of the blue-green algae and is usually isolated from the filamentous cyanobacteria Arthrospira platensis Gomont (Spirulina). Due to its multiple physiological functions and non-toxicity, cyano-phycocyanin may be a potential substance for the topical treatment of various skin diseases. Considering that the conventional medicine faces drug resistance, insufficient efficacy and side effects, the plant origin compounds can act as an alternative option. Thus, the aim of this paper was to review the wound healing, antimicrobial, antioxidative, anti-inflammatory, antimelanogenic and anticancer properties and mechanisms of cyano-phycocyanin topical activities on human skin. Moreover, possible applications and biotechnological requirements for pharmaceutical forms of cyano-phycocyanin for the treatment of various skin diseases are discussed in this review.

Physicochemical degradation of phycocyanin and means to improve its stability: A short review

The cyanobacterium Arthrospira platensis, spirulina, is a source of pigments such as phycobiliprotein and phycocyanin. Phycocyanin is used in the food, cosmetics, and pharmaceutical industries because of its antioxidant, anti-inflammatory, and anticancer properties. The different steps involved in extraction and purification of this protein can alter the final properties. In this review, the stability of phycocyanin (pH, temperature, and light) is discussed, considering the physicochemical parameters of kinetic modeling. The optimal working pH range for phycocyanin is between 5.5 and 6.0 and it remains stable up to 45 °C; however, exposure to relatively high temperatures or acidic pH decreases its half-life and increases the degradation kinetic constant. Phycobiliproteins are sensitive to light; preservatives such as mono- and di-saccharides, citric acid, or sodium chloride appear to be effective stabilizing agents. Encapsulation within nano- or micro-structured materials such as nanofibers, microparticles, or nanoparticles, can also preserve or enhance its stability.

•

Phycocyanin is in great demand for industrial application.

•

Phycocyanin is sensitive to pH, temperature, and light.

•

Optimal stability occurs between pH 5.5–6.0 and at temperatures <45 °C in the dark.

•

The use of preservatives or its encapsulation with polymers enhances its stability.

Phycocyanin from Spirulina: A review of extraction methods and stability

Phycocyanin (C-PC) application by the industry is still limited due to extraction methods drawbacks and to the low stability of these compounds after the extraction process. To overcome such limitations, alternative extraction methodologies have been evaluated, and stabilizing agents have been used under different conditions in the past years. Therefore, the aim of this review was to bring the state of the art of C-PC extraction methods, including main parameters that affect the extraction process and cell disruption mechanisms, as well as the physical and chemical parameters that may influence C-PC stability. Stabilizing agents have been used to avoid C-PC content degradation during storage and food processing. A critical analysis of the extraction methods indicated that pulsed electric field (PEF) is a promising technology for C-PC extraction since the extracts present relative high C-PC concentration and purity. Other methods either result in low purity extracts or are time demanding. Regarding stabilizing agents, natural polymers and sugars are potential compounds to be used in food formulations to avoid color and antioxidant activity losses.

Stability, kinetics, and application study of phycobiliprotein pigments extracted from red algae Gracilaria gracilis

Phycobiliprotein (PBP) pigments were extracted from red algae Gracilaria gracilis through maceration in phosphate buffer using previously optimized conditions. The stability of PBPs in the extracts was assessed by monitoring the extracts at different pHs and temperatures for 10 days. Since phycoerythrin (PE) is the main PBP present in G. gracilis, PE content was spectroscopically determined and used as a response factor. Kinetic modeling was used to describe PE degradation under different ranges of T and pH. The pigment extracts presented higher stability at pH 6.9 and -20 °C. PE was semipurified by precipitation with ammonium sulphate 65% followed by dialysis against water until a purity index of 0.7. The pigment was successfully applied as colorant in pancakes and yogurts with a pigment concentration of 0.15%. This study highlights the potential of PE pigments extracted from G. gracilis for applications in food products. PRACTICAL APPLICATION: Phycobiliprotein pigments were extracted from red algae Gracilaria gracilis through maceration in phosphate buffer. The stability of the pigment was evaluated at different pHs and temperatures, presenting higher stability at neutral pH and low temperatures. The pigment was successfully applied as colorant in pancakes and yogurts with a low pigment concentration. This study highlights the potential of phycobiliprotein pigments extracted from G. gracilis for applications in food products.

Extraction Methods for Obtaining Natural Blue Colorants

Background:

Blue is a color not often present in food. Even so, it is especially attractive to children. Today, most blue coloring agents used by the food industry are synthetic. With increasing health issues concern by the scientific community and the general population, there is a trend to look for natural alternatives to most synthetic products. There only exist few natural blue colorants, which are presented in a literature survey, along with the methods currently used for their recovery from natural sources. The best extraction methods and process parameters for the extraction of blue anthocyanins, iridoids and phycocyanin are discussed.

Methods:

A literature survey was conducted to detect the main sources of blue colorants found in nature. The focus was on the extraction methods used to recover such molecules, with the objective of finding efficient and environmentally safe techniques for application at industrial level, and, thus, allowing the production of natural blue colorants at scale high enough for food industry consumption.

Results:

The main natural blue colorants found in literature are anthocyanins, phycocyanin, and genipin. While anthocyanins can be recovered from a variety of plants, the source of phycocyanin are algae, and genipin can be obtained specifically from Gardenia jasminoides Ellis and Genipa americana L. Several extraction techniques have been applied to recover blue colorants from such sources, from classical methods using organic solvents, to more sophisticated technologies as ultrasoundassisted extraction, supercritical fluid extraction, pressurized liquid extraction, high-pressure extraction, and enzyme-assisted extraction.

Conclusion:

There is great potential for anthocyanins, phycocyanin and genipin use as natural food additives with health benefits, besides imparting color. However, the technologies for the colorants recovery and application are not mature enough. Therefore, this area is still developing, and it is necessary to evaluate the economic feasibility of the proposed extraction processes, along with the safety and acceptance of colored food using these additives.

One structure, multiple features: The phycocyanin in biotechnology

Phycocyanine (PC) is a water-soluble, non-toxic and bioactive (antioxidant, anti-inflammatory, antitumor, etc.) phycobiliprotein isolated, mainly, from cyanobacteria. Due to its several properties, PC is considered to be a rising biomolecule for Industrial exploitation, and has become an important research axis in order to promote its production, and optimize its biotechnological applications. The aim of this review article was to discuss the basic, and recent properties and applications of PC, and to bring together data on various aspects of PC stabilization, and PC nanopar-ticles formulation. In addition, an overview of the main structural characteristics and process-ses of PC extraction and purification were also discussed. The recent scientific research findings concluded that PC is a promising both functional, and bioactive additive in industry, especially, in food as a dye, in imaging as a fluorescent labeling agent, and in the phar-maceutical and nano-pharmaceutical field as a bioactive molecule and nanopar-ticles, particularly, due to it antitumor capacity. Phycocyanine is, thus, a promising bio-active molecules in pharmacological, and medical fields.

Phycobiliproteins from extreme environments and their potential applications

The light-harvesting phycobilisome complex is an important component of photosynthesis in cyanobacteria and red algae. Phycobilisomes are composed of phycobiliproteins, including the blue phycobiliprotein phycocyanin, that are considered high-value products with applications in several industries. Remarkably, several cyanobacteria and red algal species retain the capacity to harvest light and photosynthesise under highly selective environments such as hot springs, and flourish in extremes of pH and elevated temperatures. These thermophilic organisms produce thermostable phycobiliproteins, which have superior qualities much needed for wider adoption of these natural pigment-proteins in the food, textile, and other industries. Here we review the available literature on the thermostability of phycobilisome components from thermophilic species and discuss how a better appreciation of phycobiliproteins from extreme environments will benefit our fundamental understanding of photosynthetic adaptation and could provide a sustainable resource for several industrial processes.

Effects of Carrageenan and Chitosan as Coating Materials on the Thermal Degradation of Microencapsulated Phycocyanin from Spirulina sp

Phycocyanin is a natural substance that can be used as an antioxidant and food colorant. The quality of phycocyanin deteriorates when it is exposed to heat, and such deterioration is evidenced by decreases in its antioxidant activity and color. Encapsulation, which introduces a coating material over a substance of interest, has been applied to prevent changes in substance quality. The objective of the present research is to evaluate the kinetics of thermal degradation of phycocyanin coated with carrageenan or chitosan. Encapsulated phycocyanin samples were exposed to temperatures of 40, 50, or 60 °C for 90 min, and kinetics of the resulting degradation was evaluated to determine changes in sample quality. The results showed that the thermal degradation of encapsulated phycocyanin at 40–60 °C follows first-order reaction kinetics with reaction rate constants (k) of 4.67–9.17 × 10–5 s-1 and 3.83–7.67 × 10–5 s-1 for carrageenan and chitosan, respectively, and that the k of encapsulated phycocyanin is slower than that obtained from samples without the coating materials (control). Encapsulation efficiencies (EE) of 68.66 % and 76.45 %, as well as loading capacities of 45.28 % and 49.16 %, were, respectively, obtained for carrageenan and chitosan.