Microencapsulation of betacyanin from dragon fruit peel by complex coacervation: Physicochemical characteristics, thermal stability, and release profile of microcapsules

Incorporation of microencapsulated polyphenols from jabuticaba peel (Plinia spp.) into a dairy drink: stability, in vitro bioaccessibility, and glycemic response

This work incorporated bioactives extracted from jabuticaba peel in the form of concentrated extract (JBE) and microencapsulated powders with maltodextrin (MDP) and gum arabic (GAP) in a dairy drink, evaluating its stability, in vitro bioaccessibility, and glycemic response. We evaluated the pH, acidity, colorimetry, total phenolics and anthocyanins, antioxidant capacity, degradation kinetics and half-life of anthocyanins, bioaccessibility, and postprandial glycemic physicochemical characteristics response in healthy individuals. The drinks incorporated with polyphenols (JBE, GAP, and MDP) and the control dairy drink (CDD) maintained stable pH and acidity over 28 days. In color, the parameter a*, the most relevant to the study, was reduced for all formulations due to degradation of anthocyanins. Phenolic and antioxidant content remained constant. In bioaccessibility, we found that after the gastrointestinal simulation, there was a decrease in phenolics and anthocyanins in all formulations. In the glycemic response, we observed that the smallest incremental areas of glucose were obtained for GAP and JBE compared to CDD, demonstrating that polyphenols reduced glucose absorption. Then, the bioactives from jabuticaba peel, incorporated into a dairy drink, showed good storage stability and improved the product's functional aspects.

Stability of Purple Corn Anthocyanin Encapsulated by Maltodextrin, and Its Combinations with Gum Arabic and Whey Protein Isolate

Purple corn anthocyanins are important natural colourants with cheap prices and rich bioactivities. However, their stability is limited. Microencapsulation is an effective way to improve anthocyanin stability and the influence of the type of wall material on the stability of encapsulated anthocyanin is very important. In this study, maltodextrin (MD) and its combination with whey protein isolate (WPI) or gum arabic (GA) were utilised as wall materials to obtain encapsulated purple corn anthocyanins (PCAs) (MD-PCA, MD-WPI-PCA, MD-GA-PCA) using spray drying. The effect of the amount of the wall material was determined by encapsulation efficiency, anthocyanin content, and colour. On this basis, the effects of the types of wall materials on the physicochemical characteristics, storage, and digestion stabilities of encapsulated PCA, as well as their stabilities in chewing tablets, were investigated. The highest encapsulation efficiency, suitable colour, and anthocyanin content were obtained with the mass ratios 1:1 PCA to MD, 2:3 PCA to MD-GA, and 1:1 PCA to MD-WPI. Microencapsulation increased PCA storage and digestion stabilities. All three types of PCA microcapsules had low water content and hygroscopicity and good water solubility. MD-PCA had the strongest stability when stored at 25 °C; MD-GA-PCA-when stored at 40 °C, or in the presence of 5000 Lux light illumination; MD-WPI-PCA-when stored in 75% relative humidity or during gastric-intestinal digestion, but its resistance to 40 °C temperature and light illumination was lower than those for the two others. When used in chewing tablets, MD encapsulation was most stable in the presence of Ca²⁺, V_C, or Fe²⁺ and improved PCA digestion stability. In conclusion, MD is a good choice for PCA encapsulation in regular conditions. MD-GA and MD-WPI can be used when considering high storage temperature (or light illumination) and high humidity (or for high digestion stability), respectively. The results of this study provide a reference for the storage and application of PCA.

Nanocomposite of chitosan/gelatin/carbon quantum dots as a biocompatible and efficient nanocarrier for improving the Curcumin delivery restrictions to treat brain cancer

Curcumin (CUR) is among the most appropriate and natural-based anticancer drugs that can be applied effectively treat different classes of cancers. However, CUR suffers from a low half-life and stability in the body, which has restricted the efficacy of its delivery applications. This study is dedicated to introducing the pH-sensitive nanocomposite of chitosan (CS)/gelatin (GE)/carbon quantum dots (CQDs) as an applicable nanocarrier for enhancing CUR half-life and its delivery restrictions. The CS/GE hydrogel was synthesized by the physical crosslinking method, which improves the biocompatibility of this hydrogel. Moreover, the water-in-oil-in-water (W/O/W) double emulsion approach is involved in fabricating the drug-loaded CS/GE/CQDs@CUR nanocomposite. Afterward, drug encapsulation (EE) and loading efficiencies (LE) have been determined. Furthermore, FTIR and XRD assessments were performed to confirm the CUR incorporation into the prepared nanocarrier and crystalline features of the nanoparticles. Then, by employing Zeta potential and dynamic light scattering (DLS) analysis, the size distribution and stability of the drug-loaded nanocomposites have been assessed, which indicated monodisperse and stable nanoparticles. Furthermore, field emission scanning electron microscopy (FE-SEM) was utilized that confirmed the homogeneous distribution of the nanoparticles with smooth and quite spherical structures. In vitro drug release pattern was studied and the kinetic analysis was performed using a curve fitting technique to determine the governing release mechanism at both acidic pH and physiological conditions. The obtained outcomes from release data revealed a controlled release behavior with a 22-hour half-life, while the EE% and EL% were acquired at 46.75 % and 87.5 %, respectively. In addition, the MTT assay has been carried out on U-87 MG cell lines to evaluate the cytotoxicity of the nanocomposite. The findings showed that the fabricated nanocomposite of CS/GE/CQDs can be assumed as a biocompatible CUR nanocarrier, while the drug-loaded nanocomposite of CS/GE/CQDs@CUR showed enhanced cytotoxicity compared to the pure CUR. Based on the obtained results, this study suggests the CS/GE/CQDs nanocomposite as a biocompatible and potential nanocarrier for ameliorating CUR delivery restrictions to treat brain cancers.

The chromogenic mechanism of natural pigments and the methods and techniques to improve their stability: A systematic review

Pigments have become a very important part of food research, not only adding sensory properties to food, but also providing functional properties to the food system. In this paper, we review the source, structure, modification, encapsulation and current status of the three main types of natural pigments that have been studied in recent years: polyphenolic flavonoids, tetraterpenoids and betaines. By examining the modification of pigment, the improvement of their stability and the impact of new food processing methods on the pigments, a deeper understanding of the properties and applications of the three pigments is gained, the paper reviews the research status of pigments in order to promote their further research and provide new innovations and ideas for future research in this field.

Encapsulation of Concentrated Solution Obtained by Block Freeze Concentration in Calcium Alginate and Corn Starch Calcium Alginate Hydrogel Beads

A model (sucrose and gallic acid) solution was concentrated by block freeze concentration (BFC) at three centrifugation cycles, and the solutions were encapsulated in calcium alginate and corn starch calcium alginate hydrogel beads. Static and dynamic tests determined the rheological behavior, differential scanning calorimetry (DSC) and Fourier transform infrared spectroscopy (FTIR) established thermal and structural properties, and the release kinetics was evaluated under in vitro simulated digestion experiment. The highest efficiency encapsulation value was close to 96%. As the concentrated solution increased in terms of solutes and gallic acid, the solutions were fitted to the Herschel-Bulkley model. Moreover, from the second cycle, the solutions exhibited the highest values of storage modulus (G') and loss modulus (G″), contributing to form a more stable encapsulation. The FTIR and DSC results demonstrated strong interactions between corn starch and alginate, establishing a good compatibility and stability in the bead formation. The kinetic release model under in vitro conditions was fitted to the Korsmeyer-Peppas model, demonstrating the significant stability of the model solutions inside the beads. Therefore, the present study proposes a clear and precise definition for the elaboration of liquid foods obtained by BFC and its incorporation inside an edible material that facilitates the controlled release in specific sites.

Spray-Drying Microencapsulation of Andean Blueberry (Vaccinium meridionale Sw.) Anthocyanins Using Prickly Pear (Opuntia ficus indica L.) Peel Mucilage or Gum Arabic: A Comparative Study

The recovery of byproducts from the food industry is a promising approach to obtain hydrophilic biopolymers with potential health benefits. In this work, the mucilage obtained from the peel of the Opuntia ficus-indica (OFI) fruit was compared with gum arabic (GA) as wall materials for the microencapsulation of Colombian blueberry anthocyanins, using the spray-drying process. For both types of microencapsulates, the following were determined: anthocyanin content (UV-vis and HPLC/MS-MS), total dietary content (enzymatic-gravimetric method), antioxidant activity (ORAC), color (CIELab parameters), morphology (SEM and particle size), and thermal behavior (DSC/TGA). Six different anthocyanins were identified by HPLC/MS-MS in the non-lyophilized Andean blueberry sample (LABP) and in the OFI-mucilage and GA microcapsules. OFI mucilage, compared to GA, favors the formation of larger spherical particles, a smoother surface without cracks, and greater thermal stability. The higher anthocyanin retention capacity in OFI microcapsules leads to higher antioxidant capacity and red coloration for this biomaterial. Consequently, the microencapsulation of anthocyanins with mucilage from the peel of the OFI fruit is proposed as a promising alternative for the protection and incorporation of this natural dye with high antioxidant capacity and dietary fiber content in new functional food/cosmetic formulations, while giving added value to the natural byproducts of OFI.

Dragon Fruit Peel Extract Enriched-Biocomposite Wrapping Film: Characterization and Application on Coconut Milk Candy

Bio-based film is an eco-friendly alternative to petroleum-based packaging film. The effects of biocomposite wrapping film enhanced with dragon fruit peel extract (0, 2% w/v, respectively) and currently used commercial packaging film (polypropylene; PP) on coconut milk caramels during storage (30 °C, 75% RH, nine days) were studied. Both 0% and 2% DPE-enriched biocomposite films were thicker and had higher water vapor permeability and solubility than the PP film but poorer mechanical characteristics. In addition, the 2% film possessed antioxidants and antioxidant ability. A FESEM micrograph revealed the rough surface and porous path of the biocomposite films. Over the storage time, the moisture content, water activity, and springiness of the coconut milk caramel candy wrapped in the PP and all DPE-enriched biocomposite films were not significantly altered. However, the lipid oxidation as the thiobarbituric acid reactive substance (TBARS) and hardness of all coconut caramels were significantly (p < 0.05) increased during storage. Furthermore, the hardness of coconut candy covered in the control (0% DPE) biocomposite film was more pronounced on day nine of storage. However, the changes in quality characteristics of the coconut candy wrapped in each film type need to be better established. The investigating factors influencing the quality deterioration of coconut milk candy should be further identified to mitigate their effects and extend the shelf-life of the coconut candy.

Cellulose Nanocrystals (CNCs) and Its Modified Form from Durian Rind as Dexamethasone Carrier

In this study, CNCs were extracted from durian rind. Modification to CNCs with saponin was conducted at 50 °C for one h. CNCs and CNCs-saponin were employed as dexamethasone carriers. Modification to CNCs using saponin did not change the relative crystallinity of CNCs. CNCs' molecular structure and surface chemistry did not alter significantly after modification. Both nanoparticles have surface charges independently of pH. Dexamethasone-released kinetics were studied at two different pH (7.4 and 5.8). Higuchi, Ritger-Peppas, first-order kinetic and sigmoidal equations were used to represent the released kinetic data. The sigmoidal equation was found to be superior to other models. The CNCs and CNCs-saponin showed burst release at 30 min. The study indicated that cell viability decreased by 30% after modification with saponin.