Modeling the inactivation of psychrotrophic Bacillus cereus spores in beef slurry by 600MPa HPP combined with 38–70°C: Comparing with thermal processing and estimating the energy requirements

Bacillus cereus: A review of "fried rice syndrome" causative agents

"Fried rice syndrome" originated from the first exposure to a fried rice dish contaminated with Bacillus cereus. This review compiles available data on the prevalence of B. cereus outbreak cases that occurred between 1984 and 2019. The outcome of B. cereus illness varies dramatically depending on the pathogenic strain encounter and the host's immune system. B. cereus causes a self-limiting, diarrheal illness caused by heat-resistant enterotoxin proteins, and an emetic illness caused by the deadly toxin named cereulide. The toxins together with their extrinsic factors are discussed. The possibility of more contamination of B. cereus in protein-rich food has also been shown. Therefore, the aim of this review is to summarize the available data, focusing mainly on B. cereus physiology as the causative agent for "fried rice syndrome." This review emphasizes the prevalence of B. cereus in starchy food contamination and outbreak cases reported, the virulence of both enterotoxins and emetic toxins produced, and the possibility of contaminated in protein-rich food. The impact of emetic or enterotoxin-producing B. cereus on public health cannot be neglected. Thus, it is essential to constantly monitor for B. cereus contamination during food handling and hygiene practices for food product preparation.

Effect of novel and conventional food processing technologies on Bacillus cereus spores

This chapter provides a summary of the effect of thermal and non-thermal processing technologies on Bacillus cereus spores, a well-known pathogenic bacterium associated with foodborne illnesses. B. cereus has been frequently detected in rice, milk products, infant food, liquid eggs products and meat products all over the world. This Gram positive, rod-shaped, facultative anaerobe can produce endospores that can withstand pasteurization, UV radiation, and chemical reagents commonly used for sanitization. B. cereus spores can germinate into vegetative cells that can produce toxins. The conventional regime for eliminating spores from food is retorting which uses the application of high temperature (121 °C). However, at this temperature, there could be a significant amount of loss in the organoleptic and functional qualities of the food components, especially proteins. This leads to the research on the preventive measures against germination and if possible, to reduce the resistance before using a non-thermal technology (temperatures less than retorting-121 °C) for inactivation. This chapter reviews the development and success of several food processing technologies in their ability to inactivate B. cereus spores in food.

Trends in Food Pathogens Risk Attenuation

Foodborne pathogens represent one of the most dangerous threats to public health along the food chain all over the world. Over time, many methods were studied for pathogen inhibition in food, such as the development of novel packaging materials with enhanced properties for microorganisms' growth inhibition (coatings, films) and the use of emerging technologies, like ultrasound, radio frequency or microwave. The aim of this study was to evaluate the current trends in the food industry for pathogenic microorganisms' inhibition and food preservation in two directions, namely technology used for food processing and novel packaging materials development. Five technologies were discussed in this study, namely high-voltage atmospheric cold plasma (HVACP), High-Pressure Processing (HPP), microwaves, radio frequency (RF) heating and ultrasound. These technologies proved to be efficient in the reduction of pathogenic microbial loads in different food products. Further, a series of studies were performed, related to novel packaging material development, by using a series of antimicrobial agents such as natural extracts, bacteriocins or antimicrobial nanoparticles. These materials proved to be efficient in the inhibition of a wide range of microorganisms, including Gram-negative and Gram-positive bacteria, fungi and yeasts.

Multitarget preservation technologies for chemical-free sustainable meat processing

Due to the growing consumer demand for safe and naturally processed meats, the meat industry is seeking novel methods to produce safe-to-consume meat products without affecting their sensory appeal. The green technologies can maintain the sensory and nutritive characteristics and ensure the microbial safety of processed meats and, therefore, can help to reduce the use of chemical preservatives in meat products. The use of chemical additives, especially nitrites in processed meat products, has become controversial because they may form carcinogenic N-nitrosamines, a few of which are suspected as cancer precursors. Thus, the objective of reducing or eliminating nitrite is of great interest to meat researchers and industries. This review, for the first time, discusses the influence of processing technologies such as microwave, irradiation, high-pressure thermal processing (HPTP) and multitarget preservation technology on the quality characteristics of processed meats, with a focus on their sensory quality. These emerging technologies can help in the alleviation of ingoing nitrite or formed nitrosamine contents in meat products. The multitarget preservation technology is an innovative way to enhance the shelf life of meat products through the combined use of different technologies/natural additives. The challenges and opportunities associated with the use of these technologies for processing meat are also reviewed.

Emerging Trends for Nonthermal Decontamination of Raw and Processed Meat: Ozonation, High-Hydrostatic Pressure and Cold Plasma

Meat may contain natural, spoilage, and pathogenic microorganisms based on the origin and characteristics of its dietary matrix. Several decontamination substances are used during or after meat processing, which include chlorine, organic acids, inorganic phosphates, benzoates, propionates, bacteriocins, or oxidizers. Unfortunately, traditional decontamination methods are often problematic because of their adverse impact on the quality of the raw carcass or processed meat. The extended shelf-life of foods is a response to the pandemic trend, whereby consumers are more likely to choose durable products that can be stored for a longer period between visits to food stores. This includes changing purchasing habits from “just in time” products “for now” to “just in case” products, a trend that will not fade away with the end of the pandemic. To address these concerns, novel carcass-decontamination technologies, such as ozone, high-pressure processing and cold atmospheric plasma, together with active and clean label ingredients, have been investigated for their potential applications in the meat industry. Processing parameters, such as exposure time and processing intensity have been evaluated for each type of matrix to achieve the maximum reduction of spoilage microorganism counts without affecting the physicochemical, organoleptic, and functional characteristics of the meat products. Furthermore, combined impact (hurdle concept) was evaluated to enhance the understanding of decontamination efficiency without undesirable changes in the meat products. Most of these technologies are beneficial as they are cost-effective, chemical-free, eco-friendly, easy to use, and can treat foods in sealed packages, preventing the product from post-process contamination. Interestingly, their synergistic combination with other hurdle approaches can help to substitute the use of chemical food preservatives, which is an aspect that is currently quite desirable in the majority of consumers. Nonetheless, some of these techniques are difficult to store, requiring a large capital investment for their installation, while a lack of certification for industrial utilization is also problematic. In addition, most of them suffer from a lack of sufficient data regarding their mode of action for inactivating microorganisms and extending shelf-life stability, necessitating a need for further research in this area.

The Effect of Temperature-Assisted High Hydrostatic Pressure on the Survival of Alicyclobacillus acidoterrestris Inoculated in Orange Juice throughout Storage at Different Isothermal Conditions

The purpose of this work was to investigate the population dynamics of the spores and vegetative cells of A. acidoterrestris in orange juice treated with temperature-assisted HHP and stored in different isothermal conditions. For this reason, the spores of two A. acidoterrestris strains were inoculated in commercial orange juice and subjected to HHP treatment at 600 MPa/60 °C for 5 and 10 min. Inoculated samples were subsequently stored at 4, 12 and 25 °C for 60 days. During storage, the population of A. acidoterrestris was determined before and after heat shock at 80 °C for 10 min in order to estimate the quantity of spores and any remaining vegetative cells on the Bacillus acidoterrestris medium agar. Results showed that spore populations decreased by 3.0–3.5 log cycles directly after HHP treatment. Subsequently, no significant changes were observed throughout storage regardless of temperature and bacterial strain. However, at 25 °C, an increase of 0.5–1.0 log cycles was noticed. For the remaining vegetative cells, the results illustrated that HHP treatment could eliminate them during storage at 4 and 12 °C, whereas at 25 °C inactivation was strain-dependent. Therefore, temperature-assisted HHP treatment could effectively inactivate A. acidoterrestris spores in orange juice and ensure that the inhibitory effect could be maintained throughout storage at low temperatures.

Emerging Non-Thermal Technologies as Alternative to SO2 for the Production of Wine

SO₂ is an antioxidant and selective antimicrobial additive, inhibiting the growth of molds in the must during the early stages of wine production, as well as undesirable bacteria and yeasts during fermentation, thus avoiding microbial spoilage during wine production and storage. The addition of SO₂ is regulated to a maximum of 150–350 ppm, as this chemical preservative can cause adverse effects in consumers such as allergic reactions. Therefore, the wine industry is interested in finding alternative strategies to reduce SO₂ levels, while maintaining wine quality. The use of non-thermal or cold pasteurization technologies for wine preservation was reviewed. The effect of pulsed electric fields (PEF), high pressure processing (HPP), power ultrasound (US), ultraviolet irradiation (UV), high pressure homogenization (HPH), filtration and low electric current (LEC) on wine quality and microbial inactivation was explored and the technologies were compared. PEF and HPP proved to be effective wine pasteurization technologies as they inactivate key wine spoilage yeasts, including Brettanomyces, and bacteria in short periods of time, while retaining the characteristic flavor and aroma of the wine produced. PEF is a promising technology for the beverage industry as it is a continuous process, requiring only microseconds of processing time for the inactivation of undesirable microbes in wines, with commercial scale, higher throughput production potential.

Impact of high-pressure treatment on casein micelles, whey proteins, fat globules and enzymes activity in dairy products: a review

The quality and safety of food products are the two factors that most influence the demands made by consumers. Contractual food sterilization and preservation methods often result in unfavorable changes in functional properties of foods. High-pressure processing (HPP) (50-1000 MPa) is a non-thermal preservation technique, which can effectively reduce the activity of spoilage and pathogenic microorganisms with minimal impact on the functional and nutritional properties of food. Comprehensive inquires have disclosed the potential profits of HPP as an alternative to heat treatments by affecting the structure of milk components, particularly proteins and fats. The present paper aims to investigate the effects of HPP on milk components including fats, casein, whey proteins, enzymes, and minerals, as well as on the industrial production of milk and dairy products including cheese, yogurt, ice cream, butter, cream, and probiotic dairy products. HPP allows to extend shelf life of products without the use of additives, meeting current consumer demands. The assurance of microbial safety and the production of food products with minimal changes in quality characteristics (organoleptic, nutritional, and rheological properties) are among its main effects. In addition, the nutritional value of HPP-treated dairy products is also preserved.

Alicyclobacillus acidoterrestris Strain Variability in the Inactivation Kinetics of Spores in Orange Juice by Temperature-Assisted High Hydrostatic Pressure

In this work, the inactivation kinetics of Alicyclobacillus acidoterrestris spores by temperature-assisted high hydrostatic pressure was assessed by means of the Weibull model. Spores from two A. acidoterrestris strains (a wild-type strain and a reference strain) were inoculated in commercial orange juice and subjected to high pressure levels (500 and 600 MPa) combined with four temperature regimes (25, 45, 60 and 70 °C) for time up to 30 min. Results showed that for a given high-pressure level spore inactivation was higher as temperature progressively increased. Furthermore, the Weibull model consistently produced satisfactory fit to the inactivation data based on the values of the root mean squared error (RMSE < 0.54 log colony-forming units (CFU)/mL) and the coefficient of determination (R2 > 0.90 in most cases). The shape of inactivation curves was concave upward (p < 1) for all temperature/high pressure levels tested, indicating rapid inactivation of the sensitive cells of the bacterium whereas the remaining ones adapted to high hydrostatic pressure (HHP) treatment. The values of the shape (p) and scale (δ) parameters of the Weibull model were dependent on the applied temperature for a given high pressure level and they were further described in a secondary model using first-order fitting curves to provide predictions of the surviving spore population at 55 and 65 °C. Results revealed a systematic over-prediction for the wild-type strain regardless of temperature and high pressure applied, whereas for the reference strain under-prediction was evident after 3 log-cycles reduction of the surviving bacteria spores. Overall, the results obtained indicate that the effectiveness of high hydrostatic pressure against A. acidoterrestris spores is strain-dependent and also underline the need for temperature-assisted HPP for effective spore inactivation during orange juice processing.

Strawberry puree processed by thermal, high pressure, or power ultrasound: Process energy requirements and quality modeling during storage

Strawberry puree was processed for 15 min using thermal (65 ℃), high-pressure processing (600 MPa, 48 ℃), and ultrasound (24 kHz, 1.3 W/g, 33 ℃). These conditions were selected based on similar polyphenoloxidase inactivation (11%–18%). The specific energies required for the above-mentioned thermal, high-pressure processing, and power ultrasound processes were 240, 291, and 1233 kJ/kg, respectively. Then, the processed strawberry was stored at 3 ℃ and room temperature for 30 days. The constant pH (3.38±0.03) and soluble solids content (9.03 ± 0.25°Brix) during storage indicated a microbiological stability. Polyphenoloxidase did not reactivate during storage. The high-pressure processing and ultrasound treatments retained the antioxidant activity (70%–74%) better than the thermal process (60%), and high-pressure processing was the best treatment after 30 days of ambient storage to preserve antioxidant activity. Puree treated with ultrasound presented more color retention after processing and after ambient storage than the other preservation methods. For the three treatments, the changes of antioxidant activity and total color difference during storage were described by the fractional conversion model with rate constants k ranging between 0.03–0.09 and 0.06–0.22 day − 1, respectively. In resume, high-pressure processing and thermal processes required much less energy than ultrasound for the same polyphenoloxidase inactivation in strawberry. While high-pressure processing retained better the antioxidant activity of the strawberry puree during storage, the ultrasound treatment was better in terms of color retention.

High pressure inactivation of Brettanomyces bruxellensis in red wine

Brettanomyces bruxellensis ("Brett") is a major spoilage concern for the wine industry worldwide, leading to undesirable sensory properties. Sulphur dioxide, is currently the preferred method for wine preservation. However, due to its negative effects on consumers, the use of new alternative non-thermal technologies are increasingly being investigated. The aim of this study was to determine and model the effect of high pressure processing (HPP) conditions and yeast strain on the inactivation of "Brett" in Cabernet Sauvignon wine. Processing at 200 MPa for 3 min resulted in 5.8 log reductions. However higher pressure is recommended to achieve high throughput in the wine industry, for example >6.0 log reductions were achieved after 400 MPa for 5 s. The inactivation of B. bruxellensis is pressure and time dependent, with increased treatment time and pressure leading to increased yeast inactivation. It was also found that yeast strain had a significant effect on HPP inactivation, with AWRI 1499 being the most resistant strain. The Weibull model successfully described the HPP "Brett" inactivation. HPP is a viable alternative for the inactivation of B. bruxellensis in wine, with the potential to reduce the industry's reliance on sulphur dioxide.