Optimization of antioxidant extraction from edible brown algae Ascophyllum nodosum using response surface methodology

Ultrasound-assisted extraction of phenolics from Sargassum carpophyllum - A kinetics study

The species of the brown macroalgal genus Sargassum are distributed globally and contain many bioactive compounds. In this study, ultrasound-assisted extraction (UAE) was applied to obtain phenolic compounds with strong antioxidant activity from Sargassum carpophyllum collected along the coastline of Weizhou Island in the South China Sea. The influence of different variables such as the solid-liquid ratio (1:5-1:30 g · mL-1), ultrasonic power (160-280 W), duty circle ratio (DCR, 1/3-1/1), and ethanol concentration (30% to ~90%) were studied using a single factor design. The extraction kinetics were investigated using the Peleg model and second-order kinetics model, and the second-order model described the extraction procedure better than the Peleg model. Total phenol content (TPC) values of 3.316, 2.964, 2.741, and 3.665 mg phloroglucinol (PHG) · g-1 algae were achieved at a higher solid-liquid ratio (1:30 g · mL-1), higher ultrasonic power (280 W), a higher DCR (1/1), and a moderate ethanol concentration (50%), respectively. However, a slightly different result was observed in the extract obtained, with total phenol contents (TPCextract) of 52.99, 65.00, 46.22, and 55.10 mg PHG · g-1 extract and DPPH radical scavenging activity (IC50) of 0.096, 0.066, 0.131, and 0.136 mg extract · mL-1 observed at 50% ethanol, 1:5 g m· mL-1, 2/3 DCR, and 200 W respectively. All variables studied influenced the extraction kinetics by altering the extraction rate and the TPC at equilibrium. As for the bioactivities in the extract, a larger solid-liquid ratio and greater ultrasonic power may not contribute because of their ability to extract non-phenolic components simultaneously, leading to reduced overall bioactivities. The results of the present study provide essential information for future UAE process design and optimization for extracting phenolics from S. carpophyllum through mathematical modeling and could be regarded as important reference for obtaining value-added products from other macroalgae species.

Phytochemical compounds with promising biological activities from Ascophyllum nodosum extracts using microwave-assisted extraction

Phytochemical-rich antioxidant extracts were obtained from Ascophyllum nodosum (AN) using microwave-assisted extraction (MAE). Critical extraction factors such as time, pressure, and ethanol concentration were optimized by response surface methodology with a circumscribed central composite design. Under the optimal MAE conditions (3 min, 10.4 bar, 46.8 % ethanol), the maximum recovery of phytochemical compounds (polyphenols and fucoxanthin) with improved antioxidant activity from AN was obtained. In addition, the optimized AN extract showed significant biological activities as it was able to scavenge reactive oxygen and nitrogen species, inhibit central nervous system-related enzymes, and exhibit cytotoxic activity against different cancer cell lines. In addition, the optimized AN extract showed antimicrobial, and anti-quorum sensing activities, indicating that this extract could offer direct and indirect protection against infection by pathogenic microorganisms. This work demonstrated that the sustainably obtained AN extract could be an emerging, non-toxic, and natural ingredient with potential to be included in different applications.

Extraction, Isolation and Biological Activity of Two Glycolipids from Bangia fusco-purpurea

In order to explore the extraction and activity of macroalge glycolipids, six macroalgae (Bangia fusco-purpurea, Gelidium amansii, Gloiopeltis furcata, Gracilariopsis lemaneiformis, Gracilaria sp. and Pyropia yezoensis) glycolipids were extracted with five different solvents firstly. Considering the yield and glycolipids concentration of extracts, Bangia fusco-purpurea, Gracilaria sp. and Pyropia yezoensis were selected from six species of marine macroalgae as the raw materials for the extraction of glycolipids. The effects of the volume score of methanol, solid-liquid ratio, extraction temperature, extraction time and ultrasonic power on the yield and glycolipids concentration of extracts of the above three macroalgae were analyzed through a series of single-factor experiments. By analyzing the antioxidant activity in vitro, moisture absorption and moisturizing activity, the extraction process of Bangia fusco-purpurea glycolipids was further optimized by response surface method to obtain suitable conditions for glycolipid extraction (solid-liquid ratio of 1:27 g/mL, extraction temperature of 48 °C, extraction time of 98 min and ultrasonic power of 450 W). Bangia fusco-purpurea extracts exhibited a certain scavenging effect on DPPH free radicals, as well as good moisture-absorption and moisture retaining activities. Two glycolipids were isolated from Bangia fusco-purpurea by liquid-liquid extraction, silica gel column chromatography and thin-layer chromatography, and they showed good scavenging activities against DPPH free radicals and total antioxidant capacity. Their scavenging activities against DPPH free radicals were about 60% at 1600 µg/mL, and total antioxidant capacity was better than that of Trolox. Among them, the moisturizing activity of a glycolipid was close to that of sorbierite and sodium alginate. These two glycolipids exhibited big application potential as food humectants and antioxidants.

Antioxidant and anti-hepatitis A virus activities of Ecklonia cava Kjellman extracts

Ecklonia cava is a nutrient-rich algae species that contains abundant physiological phytochemicals, including peptides, carotenoids, fucoidans, and phlorotannins. However, elucidation of the antiviral effects of this algae and identification of new functional ingredients warrant further investigation. This study was aimed at investigating the potential anti-hepatitis A virus activities of extracts of E. cava prepared in different solvents. E. cava extracts were prepared using hot water and 70 % ethanol. The antioxidant activities of the extracts were confirmed by analyzing the total phenolic content, as well as 2,2-diphenyl-1-picrylhydrazyl and 2,2'-azino-bis-3-ethylbenzothiazoline-6-sulfonic acid radical scavenging activities. The inhibitory effects of the extracts against hepatitis A virus were analyzed using real-time polymerase chain reaction. The E. cava extract yield was 22.5-27.2 % depending on the extraction solvent. The 2,2-diphenyl-1-picrylhydrazyl radical scavenging activity was 70.44 % and 91.05 % for hot water and ethanol extracts at a concentration of 1000 ppm. The 2,2'-azino-bis-3-ethylbenzothiazoline-6-sulfonic acid radical scavenging activity of the ethanol extract was the highest (93.57 %) at 1000 μg/mL. Fourier-transform infrared was used to identify the functional groups (phlorotannin and alginate) in the extraction solvents. Ultra-high performance liquid chromatography with quadrupole time-of-flight tandem mass spectrometry analysis revealed a potential bioactive compound previously unidentified in E. cava. Finally, we identified the antiviral activity of E. cava extracts against hepatitis A virus replication. These findings demonstrate that E. cava could be used as an anti-hepatitis A virus functional food and biological material.

Antioxidant and Antidiabetic Properties of Phlorotannins from Ascophyllum nodosum Seaweed Extracts

Seaweeds have gained considerable attention in recent years due to their potential health benefits and high contents of bioactive compounds. This review focuses on the exploration of seaweed's health-promoting properties, with particular emphasis on phlorotannins, a class of bioactive compounds known for their antioxidant and antidiabetic properties. Various novel and ecofriendly extraction methods, including solid-liquid extraction, ultrasound-assisted extraction, and microwave-assisted extraction are examined for their effectiveness in isolating phlorotannins. The chemical structure and isolation of phlorotannins are discussed, along with methods for their characterization, such as spectrophotometry, nuclear magnetic resonance, Fourier transform infrared spectroscopy, and chromatography. Special attention is given to the antioxidant activity of phlorotannins. The inhibitory capacities of polyphenols, specifically phlorotannins from Ascophyllum nodosum against digestive enzymes, such as α-amylase and α-glucosidase, are explored. The results suggest that polyphenols from Ascophyllum nodosum seaweed hold significant potential as enzyme inhibitors, although the inhibitory activity may vary depending on the extraction conditions and the specific enzyme involved. In conclusion, seaweed exhibits great potential as a functional food ingredient for promoting health and preventing chronic diseases. Overall, this review aims to condense a comprehensive collection of high-yield, low-cost, and ecofriendly extraction methods for obtaining phlorotannins with remarkable antioxidant and antidiabetic capacities.

Investigation on Some Algal Extracts as Appropriate Stabilizers for Radiation-Processed Polymers

This study presents the appropriate solution, algal extracts, for the improvement of polymer durability when the material is subjected to acute oxidation damage. The investigated support, styrene-isoprene-styrene (SIS), is modified by three algal extracts: Chlorella vulgaris, Spirulina platensis, and Ascophyllum nodosum (Kelp) with a low concentration (1 wt%). The presence of polyhedral oligomeric silsesquioxane (POSS) ensures the growth of stability with respect to the pristine polymer. The thermal performances of the host polymer, indicated by chemiluminescence, reveal the essential contribution of an additive to the improvement in oxidation strength. The stability of the polymer adjusted by algal extracts is proved by the activation energy values, which increase from 49 kJ mol^-1 to 89 kJ mol^-1 for the same polymer modified with Ascophyllum nodosum. This main important characteristic is the consequence of the highly efficient activity of the polyphenol components of algal extracts and the effect of the three natural additives on the favorably changed kinetic parameters (oxidation induction time and onset oxidation temperature). The exposure of the polymer matrix to the damaging action of γ-rays does not affect the proper contributions to the fast delay in material ageing. The irradiation of 100 kGy, a usual technological dose, may be successfully applied in the radiation processing of a polymer stabilized with algal extracts due to the efficient protection of the additive as the chain-breaking agents.

Bioactive Potential of Brown Algae

Marine-derived natural products are rich source of secondary metabolites with huge potentials including novel therapeutic agents. Marine algae are considered to be a good source of secondary metabolites with versatile bioactivities. During the last few decades, researches related to natural products obtained from brown algae have remarkably escalated as they contain active compounds with varied biologically activities like antimicrobial, anticancer, antioxidant, anti-inflammatory, antidiabetic, and antiparasitic properties. The main bioactive components such as phlorotannin, fucoxanthin, alginic acid, fucoidan, and laminarin have been briefly discussed here, together with their composition and biological activities. In this review, the biological function of extracts and the metabolites of brown algae as well as their pharmacological impacts with the description of the possible mechanism of their action are described and discussed. Also, this study is expected to examine the multifunctional properties of brown algae that facilitate natural algal products, including the ability to integrate these functional properties in a variety of applications.

Applications of algae to obtain healthier meat products: A critical review on nutrients, acceptability and quality

Meat constitutes one the main protein sources worldwide. However, ethical and health concerns have limited its consumption over the last years. To overcome this negative impact, new ingredients from natural sources are being applied to meat products to obtain healthier proteinaceous meat products. Algae is a good source of unsaturated fatty acids, proteins, essential amino acids, and vitamins, which can nutritionally enrich several foods. On this basis, algae have been applied to meat products as a functional ingredient to obtain healthier meat-based products. This paper mainly reviews the bioactive compounds in algae and their application in meat products. The bioactive ingredients present in algae can give meat products functional properties such as antioxidant, neuroprotective, antigenotoxic, resulting in healthier foods. At the same time, algae addition to foods can also contribute to delay microbial spoilage extending shelf-life. Additionally, other algae-based applications such as for packaging materials for meat products are being explored. However, consumers' acceptance for new products (particularly in Western countries), namely those containing algae, not only depends on their knowledge, but also on their eating habits. Therefore, it is necessary to further explore the nutritional properties of algae-containing meat products to overcome the gap between new meat products and traditional products, so that healthier algae-containing meat can occupy a significant place in the market.

Aquatic Phlorotannins and Human Health: Bioavailability, Toxicity, and Future Prospects

Medicinal chemists and pharmacognosists have relied on terrestrial sources for bioactive phytochemicals to manage and treat disease conditions. However, minimal interest is given to sea life, especially macroalgae and their inherent phytochemical reserves. Phlorotannins are a special class of phytochemicals mainly predominant in brown algae of marine and estuarine habitats. Phlorotannins are formed through the polymerization of phloroglucinol residues and derivatives via the polyketide (acetate–malonate) pathway. Studies over the past decades have implicated phlorotannins with several bioactivities, including anti-herbivory, antioxidants, anti-inflammatory, anti-microbial, anti-proliferative, anti-diabetic, radio-protective, adipogenic, anti-allergic, and anti-human immunodeficiency virus (anti-HIV) properties. All these activities are reflected in their applications as nutraceuticals and cosmeceutical agents. This article reviews the chemical composition of phlorotannins, their biological roles, and their applications. Moreover, very few studies on phlorotannin bioavailability, safety, and toxicity have been thoroughly reviewed. The paper concludes by suggesting exciting research questions for further studies.

Thermo resistant antioxidants from photoautotrophic microorganisms: screening and characterization

The demand for natural antioxidants to be used in food industry is increasing, as synthetic antioxidants are toxic and have high production costs. Specifically, food processing and preservation require antioxidants resistant to thermal sterilization processes. In this study, twenty-five strains among microalgae and cyanobacteria were screened as antioxidants producers. The species Enallax sp., Synechococcus bigranulatus and Galdieria sulphuraria showed the highest content of chlorophyll a and total carotenoids. In vitro stability and antioxidant activity of the ethanolic extracts were performed. The results revealed that pigments present in the extracts, obtained from the previously mentioned species, were stable at room temperature and exhibited in vitro free radical scavenging potential with IC₅₀ values of 0.099 ± 0.001, 0.048 ± 0.001 and 0.13 ± 0.02 mg mL^-1, respectively. Biocompatibility assay showed that the extracts were not toxic on immortalized cell lines. The antioxidant activity was also tested on a cell-based model by measuring intracellular ROS levels after sodium arsenite treatment. Noteworthy, extracts were able to exert the same protective effect, before and after the pasteurization process. Results clearly indicate the feasibility of obtaining biologically active and thermostable antioxidants from microalgae. Green solvents can be used to obtain thermo-resistant antioxidants from cyanobacteria and microalgae which can be used in the food industry. Thus, the substitution of synthetic pigments with natural ones is now practicable.

A Novel Three-Step Extraction Strategy for High-Value Products from Red Algae Porphyridium purpureum

The microalga Porphyridium accumulates high-value compounds such as phycoerythrin, polyunsaturated fatty acids, and polysaccharides, and thus, the extraction of these compounds could significantly expand the value of Porphyridium biomass. In the present study, a novel fractional extraction strategy based on the characteristics of these compounds was established using cold water, 95% ethanol, and hot water. The yield of phycoerythrin, lipids, and polysaccharides was 63.3, 74.3, and 75.2%, respectively. The phycoerythrin exhibited excellent fluorescence characteristics but had low purity. The crude lipid was dark with poor fluidity. Digalactosyldiacylglycerol and sulphoquinovosyldiacylglycerol containing C20:5 and C20:4 were the most abundant glycerolipids, while glucose, xylose, and galactose constituted the intracellular polysaccharides that had covalently bound to proteins (8.01%), uronic acid (4.13%), and sulfate (8.31%). Compared with polysaccharides and crude lipids, crude phycoerythrin showed the best antioxidant activity. Overall, the three-step fractional extraction process was feasible for Porphyridium; however, further purification is necessary for downstream applications.

Impact of Pressurized Liquid Extraction and pH on Protein Yield, Changes in Molecular Size Distribution and Antioxidant Compounds Recovery from Spirulina

The research aims to extract nutrients and bioactive compounds from spirulina using a non-toxic, environmentally friendly and efficient method—Pressurized Liquid Extraction (PLE). In this work, Response Surface Methodology (RSM)–Central Composite Design (CCD) was used to evaluate and optimize the extraction time (5–15 min), temperature (20–60 °C) and pH (4–10) during PLE extraction (103.4 bars). The multi-factor optimization results of the RSM-CCD showed that under the pressure of 103.4 bars, the optimal conditions to recover the highest content of bioactive compounds were 10 min, 40 °C and pH 4. Furthermore, the compounds and antioxidant capacity of PLE and non-pressurized extraction extracts were compared. The results showed that under the optimal extraction conditions (10 min, 40 °C and pH 4), PLE significantly improved the antioxidant capacity (2870.5 ± 153.6 µM TE), protein yield (46.8 ± 3.1%), chlorophyll a (1.46 ± 0.04 mg/g), carotenoids (0.12 ± 0.01 mg/g), total polyphenols (11.49 ± 0.04 mg/g) and carbohydrates content (78.42 ± 1.40 mg/g) of the extracts compared with non-pressurized extraction (p < 0.05). The protein molecular distribution of the extracts was analyzed by sodium dodecyl sulfate polyacrylamide gel electrophoresis (SDS-PAGE), and the results showed that there were more small-molecule proteins in PLE extracts. Moreover, Liquid Chromatography Triple Time of Flight Mass Spectrometry (TOF–LC–MS–MS) was used to analyze the phenolic profile of the extracts, and the results showed the extracts were rich on phenolic compounds, such as p-coumaric acid and cinnamic acid being the predominant phenolic compounds in the PLE extract. This indicates that PLE can promote the extraction of bioactive compounds from Spirulina, which is of great significance for the application of PLE technology to obtain active substances from marine algae resources.

Extraction optimization by using response surface methodology and purification of yellow pigment from Gardenia jasminoides var. radicans Makikno

Gardenia jasminoides var. radicans Makikno contains rich gardenia yellow pigment (GYP). In this study, the process of pigment extraction was optimized based on a Box-Behnken design (BBD) and response surface methodology (RSM). The absorbance and antioxidant activity (AA) were considered as responses. The result showed that the optimal extraction conditions were ethanol concentration 65.10%, liquid/solid ratio 10:1 ml/g, extraction time 59.85 min, and extraction temperature 60.04℃ for the maximal response values of absorbance (0.79) and AA (91.30%), respectively. Crude GYP was purified by the 13 different resins. The result showed that BJ-7514 was suitable for purifying GYP with the absorption ratio of 95.4%. Moreover, the 80% of ethanol eluent is applicable on the BJ-7514 with the desorption ratio of 91.93%. The major component of GYP (Crocin-3) was isolated and identified from the purified GYP.

Seaweed-based natural ingredients: Stability of phlorotannins during extraction, storage, passage through the gastrointestinal tract and potential incorporation into functional foods

Adding value to seaweed by extracting their different bioactive compounds and incorporating them into foods represent an interesting and strategic approach to diversify the functional foods offer. However, once harvested, fresh seaweed must overcome a sequence of crucial steps to confer their biological activity. Pre-processing operations and extraction processes, as well as long-term storage, play important roles in improving or decreasing the phlorotannins content. In their way to the gut (biological target), phlorotannins are exposed to the human gastrointestinal tract (GIT), where the physiological pH and digestive enzymes can significantly affect the phlorotannins' stability and thus, alter their biological activity. Besides, the subsequent incorporation into foodstuffs could be limited due to sensory issues, as tannins have been associated with astringency and bitter taste, and thus effective phlorotannins doses may negatively affect the sensory attributes of foods. These drawbacks expose the need of applying smart strategies to develop a final product providing the necessary protective mechanisms to maintain the active molecular form of phlorotannins up to the consumption time, also controlling their release upon arrival to the gut. In this context, the impact of these technological processes (from pre-processing to the passage through the GIT) on phlorotannins stability, as well as the innovative developed approaches to overcome these issues will be deeply discussed in this review. Besides, recent findings related to the phlorotannins' health benefits will be pointed out. Special attention on the potential incorporation of phlorotannins into functional foods will be also put it on.

Optimización del proceso de extracción asistida por ultrasonido de compuestos fenólicos de Justicia spicigera Schltdl. mediante la metodología de superficie de respuesta

El interés en el estudio de los polifenoles ha crecido de manera considerable en los últimos años debido a su alta capacidad para atrapar radicales libres asociados con diversas enfermedades. Por este motivo, el objetivo del presente trabajo fue obtener y caracterizar los compuestos fenólicos de Justicia spicigera Schltdl. mediante extracción asistida por ultrasonido. A los extractos, se les determinó el contenido fenólico total (método de Folin-Ciocalteu), actividad antioxidante (potencial antioxidante/reductor del hierro) y actividad secuestradora de radicales libres (método del radical libre 2,2-difenil-2-picrilhidrazil). La metodología de superficie de respuesta (MSR) se empleó para evaluar el efecto del disolvente (agua/etanol) y el tiempo de extracción, en el contenido de fenoles totales y las propiedades antioxidantes. El análisis de varianza (ANOVA) indicó que la concentración de agua en la mezcla del disolvente afectó de manera importante el rendimiento de los compuestos, así como la actividad antioxidante y antiradical. De acuerdo con la MSR, las condiciones óptimas para la extracción son 25% de agua en la mezcla del disolvente y un tiempo de sonicación de 16 minutos.

Optimisation of Ultrasound Frequency, Extraction Time and Solvent for the Recovery of Polyphenols, Phlorotannins and Associated Antioxidant Activity from Brown Seaweeds

This study investigates ultrasound assisted extraction (UAE) process parameters (time, frequency and solvent) to obtain high yields of phlorotannins, flavonoids, total phenolics and associated antioxidant activities from 11 brown seaweed species. Optimised UAE conditions (35 kHz, 30 min and 50% ethanol) significantly improved the extraction yield from 1.5-fold to 2.2-fold in all seaweeds investigated compared to solvent extraction. Using ultrasound, the highest recovery of total phenolics (TPC: 572.3 ± 3.2 mg gallic acid equivalent/g), total phlorotannins (TPhC: 476.3 ± 2.2 mg phloroglucinol equivalent/g) and total flavonoids (TFC: 281.0 ± 1.7 mg quercetin equivalent/g) was obtained from Fucus vesiculosus seaweed. While the lowest recovery of TPC (72.6 ± 2.9 mg GAE/g), TPhC (50.3 ± 2.0 mg PGE/g) and TFC (15.2 ± 3.3 mg QE/g) was obtained from Laminaria digitata seaweed. However, extracts from Fucus serratus obtained by UAE exhibited the strongest 1,1-diphenyl-2-picryl-hydrazyl (DPPH) scavenging activity (29.1 ± 0.25 mg trolox equivalent/g) and ferric reducing antioxidant power (FRAP) value (63.9 ± 0.74 mg trolox equivalent/g). UAE under optimised conditions was an effective, low-cost and eco-friendly technique to recover biologically active polyphenols from 11 brown seaweed species.