Practical application of nonaqueous foam in the preparation of a novel aerated reduced-fat sauce

Edible nonaqueous foams: Recent advances in the formation, stabilization, characterization, and applications

Edible nonaqueous foam has emerged as a novel direction for the development of fat-reducing products in recent years. This review critically summarizes the current progress of research on this foam mainly over the past decade. Initially, destabilization mechanisms that hinder its rational design are highlighted. Then, the preparation of nonaqueous foam is discussed, focusing on the types of stabilizers and foam properties. Additionally, the characterization methods of this foam and its applications are discussed. Finally, the gaps in the current research on edible nonaqueous foam and future perspectives are pointed out. Edible nonaqueous foam offers a novel avenue for developing fat replacers while preserving desirable sensory attributes. Moreover, this foam has demonstrated its potential in encapsulating flavor ingredients as well as developing responsive systems, thereby contributing to future advancements in personalized nutrition. This review has the potential to inspire innovative ideas for future research endeavors within the field of foam.

Foaming of semi-solid gel - An emerging concept in the food lipid sector

The research on the foaming of semi-solid gel (oleogel) has recently attracted the attention of food scientists owing to its functional characteristics that make it a potential alternative to saturated fat and trans-fat used in food products. The oleofoams are prepared by heating the vegetable oil with an oleogelator followed by cooling to form a semi-solid gel and then incorporating air in the semi-solid gel to form an air-in-oil system having higher stability to deformation. Oleofoams provide new opportunities for the development of novel aerated food products free of saturated and trans fatty acids to meet the growing demand of consumers for healthy foods. The objective of the present review is to understand the development of new research area in food technology thereby focusing on the process of formulation of oleofoams covering the effect of process parameters on the stability of oleofoams, functional characteristics of oleofoam system, food application, and research gap.

Producing superior oleofoams: Unraveling the impact of oil type, surfactant concentration, and production temperature on foam stability and functional characteristics

This study explores the impact of oil type, surfactant concentration, and production temperature on oleofoam properties. Oleofoams were prepared using different concentrations (5, 8, and 10 % w/w) of monoglyceride (MG) in olive, soybean, and sunflower oils at temperatures of 25 °C and 5 °C. The results indicate that higher surfactant concentrations and lower production temperatures enhance the stability, foamability, melting behavior, and hardness of the oleofoams, while minimizing oil drainage. Microscopic analysis reveals that lower production temperatures result in smaller bubble sizes in all oil blends which reduces oil loss and increases the hardness of the oleofoam. Also, oleofoams derived from different oils exhibit solid-like behavior. Among the oils studied, the oleofoam prepared with sunflower oil, at a concentration of 10 % MG and a production temperature of 5 °C, demonstrates superior properties. These findings provide valuable insights into optimizing oleofoam properties by controlling the oil type, surfactant concentration, and production temperature.

Oleo-foams and emulsion-foams as lipid-based foam systems: a review of their formulation, characterization, and applications

Lipid-based foam systems (LBFs) have grown in popularity recently because of their effectiveness and potential uses. As a result, in order to stabilize them, considerable work has been put into developing more biodegradable and environmentally friendly materials. However, the use of natural stabilizing agents has been constrained due to a lack of thorough knowledge of them. This review offers insightful data that will encourage more studies into the development and use of LBFs. Emulsifiers or gelling agents, as well as new preparation and characterization methods, can be used to increase or prolong the functional performance of LBFs. Special emphasis has been given on the connections between their structures and properties and expanding the range of industries in which they can be applied. In conclusion, it is crucial to gain a deeper understanding of the preparation mechanisms and influencing factors in order to improve the quality of foam products and create novel LBFs.

Interfacial behavior, gelation and foaming properties of diacylglycerols with different acyl chain lengths and isomer ratios

Diacylglycerols (DAG) of varying chain lengths were synthesized and the acyl migrated samples with different 1,3-DAG/1,2-DAG ratios were obtained. The crystallization profile and surface adsorption differed depending on DAG structure. C12 and C14 DAGs formed small platelet- and needle-like crystals at the oil-air interface which can better reduce surface tension and pack in an ordered lamellar structure in oil. The acyl migrated DAGs with higher ratios of 1,2-DAG showed reduced crystal size and lower oil-air interfacial activity. C14 and C12 DAG oleogels exhibited higher elasticity and whipping ability with crystal shells surrounding bubbles, whereas C16 and C18 DAG oleogels had low elasticity and limited whipping ability due to the formation of aggregated needle-like crystals and loose gel network. Thus, acyl chain length dramatically influences the gelation and foaming behaviors of DAGs whereas the isomers exert little influence. This study provides basis for applying DAG of different structures in food products.

Microbubbles in Food Technology

Microbubbles are largely unused in the food industry yet have promising capabilities as environmentally friendly cleaning and supporting agents within products and production lines due to their unique physical behaviors. Their small diameters increase their dispersion throughout liquid materials, promote reactivity because of their high specific surface area, enhance dissolution of gases into the surrounding liquid phase, and promote the generation of reactive chemical species. This article reviews techniques to generate microbubbles, their modes of action to enhance cleaning and disinfection, their contributions to functional and mechanical properties of food materials, and their use in supporting the growth of living organisms in hydroponics or bioreactors. The utility and diverse applications of microbubbles, combined with their low intrinsic ingredient cost, strongly encourage their increased adoption within the food industry in coming years.

Thermal-reversible lacquer wax-based oleofoams in dual stabilization with high ambient stability

In this study, the effect of the content of the lacquer wax and whipping time on the overrun was explored. It was found that an appropriate amount of wax content and whipping time could promote crystal dual stabilization through the Pickering mechanism and the close packing in the bulk phase. Otherwise, it would result in low overrun caused by high viscous and crystal bridging. The addition of polyglycerol polyricinoleate (PGPR) could effectively enhance the overrun by apace absorbing. At the same time, adding PGPR also improved the contact angle, which was beneficial to the adsorption at the A-O interface. The 8 wt% oleogel was partially substituted by high-melting fat palm stearin (POs) and oleofoams were prepared based on blended fat. POs increased the melting point, structural strength, and β'-form crystal of oleofoams, thus improving the storage and temperature stability. The oleofoam has a maximum overrun of 189% and could maintain the shape of the decorating over 15 d at the ambient temperature, showing great potential in low-fat food applications and other delivery systems.

Gelation and foaming properties of fatty acid mixtures in sunflower oil

BACKGROUND

The development of lipid-lowering products has become the focus of the food industry due to increasing consumer awareness of the relationship between diet and health. Recently, edible oleofoams have drawn attention due to their enormous potential in reformulating food products with reduced fat content and unique mouth feel.

RESULTS

We have developed an edible oleofoam system by whipping oleogel composed of fatty acid mixtures in sunflower oil. The crystal morphology, gelation properties, and foaming properties of these oleogels could be tailored by changing the ratio of stearic acid (SA) and myristic acid (MA). Specifically, SA/MA = 2:8 (2S8M) was demonstrated to have superior foaming capability and foam stability, likely due to the densely packed and uniformly distributed crystals formed at this fatty acid ratio. Small lipid crystals in 2S8M absorbed to the air-oil interface more efficiently, and together with the strengthened network established in the bulk phase, helped stabilize the foam structure. As a result, the 2S8M oleofoam showed excellent foaming properties: strong plasticity, significantly increased overrun (up to 63.56 ± 2.58%), and significantly improved foam stability. The X-ray diffraction (XRD) results indicated that the diffraction pattern observed for 2S8M samples at d-spacing of 4.20 and 3.79 Å was related to the characteristic peak of β' type crystals, which were responsible for the enhanced foaming capability of 2S8M oleogels. Oleophobic property of 2S8M increased, as indicated by wettability in oil phase, which could possibly drive crystals to the air-oil interface.

CONCLUSIONS

These results highlighted the importance of lipid crystal morphology in determining the whippability of oleogels. © 2021 Society of Chemical Industry.

A novel strategy to fabricate stable oil foams with sucrose ester surfactant

HYPOTHESIS

Can a mixture of sucrose ester surfactant in vegetable oil be aerated to yield stable oleofoams? Is foaming achievable from one-phase molecular solutions and/or two-phase crystal dispersions? Does cooling a foam after formation induce surfactant crystallisation and enhance foam stability?

EXPERIMENTS

Concentrating on extra virgin olive oil, we first study the effect of aeration temperature and surfactant concentration on foamability and foam stability of mixtures cooled from a one-phase oil solution. Based on this, we introduce a strategy to increase foam stability by rapidly cooling foam prepared at high temperature which induces surfactant crystallisation in situ. Differential scanning calorimetry, X-ray diffraction, infra-red spectroscopy, surface tension and rheology are used to elucidate the mechanisms.

FINDINGS

Unlike previous reports, both foamability and foam stability decrease upon decreasing the aeration temperature into the two-phase region containing surfactant crystals. At high temperature in the one-phase region, substantial foaming is achieved (over-run 170%) within minutes of whipping but foams ultimately collapse within a week. We show that surfactant molecules are surface-active at high temperature and that hydrogen bonds form between surfactant and oil molecules. Cooling these foams substantially increases foam stability due to both interfacial and bulk surfactant crystallisation. The generic nature of our findings is demonstrated for a range of vegetable oil foams with a maximum over-run of 330% and the absence of drainage, coalescence and disproportionation being achievable.

Wet-etched asymmetric spherical nanoparticles with controllable pit structures and application in non-aqueous foams

The structure of colloidal particles is one of the factors that significantly affect their properties. Asymmetrical spherical particles with pit structures were prepared by using NH₄F to perform wet chemical etching on the designated positions of the partially masked particles. The depth and effectiveness of the pits were adjusted by varying the etching time. By changing the properties of the oil mixture, the oil repellency and foaming ability of the etched particles were characterized and compared. By controlling the wet etching time, the effective pit structures were etched on the particles. Within 10 d of being etched, the particles with pit geometry showed better foam properties than the original unetched particles. The pit structure on the particles improves the oil repellency of the particles in a series of oil mixtures with relatively lower surface tension. No significant difference was observed between the under-etched (18 h) particles and the non-etched particles. The ineffective geometry of the over-etched (15 d) particles results in insufficient robustness of the Cassie-Baxter state of the particles and reduces the volume of the generated foam.

Particle-stabilized oil foams

The area of oil foams although important industrially has received little academic attention until the last decade. The early work using molecular surfactants for stabilisation was limited and as such it is difficult to obtain general rules of thumb. Recently however, interest has grown in the area partly fuelled by the understanding gained in the general area of colloidal particles at fluid interfaces. We review the use of solid particles as foaming agents for oil foams in cases where particles (inorganic or polymer) are prepared ex situ and in cases where crystals of surfactant or fat are prepared in situ. There is considerable activity in the latter area which is particularly relevant to the food industry. Discussion of crude oil/lubricating oil foams is excluded from this review.